Optimus 3D Cube OTG USB test with ICS? - LG Optimus 3D

I don't have the right cable myself.... anyone with the ICS update tried it?
Sent from my LG-SU870 using xda app-developers app

2old4toys said:
I don't have the right cable myself.... anyone with the ICS update tried it?
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the question. Hope someone answers in the positive. have been waiting for this feature as ICS was supposed to address the issue. Seems that LG O3D does have the software, but GB kernels were not programmed for the use (Just like FM radio earlier)
schubeir

schubeir said:
Thanks for the question. Hope someone answers in the positive. have been waiting for this feature as ICS was supposed to address the issue. Seems that LG O3D does have the software, but GB kernels were not programmed for the use (Just like FM radio earlier)
schubeir
Click to expand...
Click to collapse
If someone confirms all micro USB OTG cable are a generic standard and works across brands (ie no difference between Samsung or LG phones) I'll try to pick one up over the weekend and try it for myself.

So I bought a USB OTG cable. Bloke in the store said they're all the same so long as the connectors fit. Micro USB at one end, female full size USB at the other.
One at a time I tried plugging in a:
USB memory stick
USB keyboard
USB mouse
None of them gave any kind of feedback. The led under the mouse did not even light up.
Maybe just need a powered USB hub? Or a Y cable... one end that boosts the power for USB?
Sent from my LG-SU870 using xda app-developers app

2old4toys said:
So I bought a USB OTG cable. Bloke in the store said they're all the same so long as the connectors fit. Micro USB at one end, female full size USB at the other.
One at a time I tried plugging in a:
USB memory stick
USB keyboard
USB mouse
None of them gave any kind of feedback. The led under the mouse did not even light up.
Maybe just need a powered USB hub? Or a Y cable... one end that boosts the power for USB?
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
do a logcat to see if theres something happening in the background

Installed logcat. For what its worth... its spewing out gibberish non stop. Regardless of what I plugin to the USB.
Sent from my LG-SU870 using xda app-developers app

What kinda "gibberish" are you talking about?
Sent from my LG-P920 using xda app-developers app

grish said:
What kinda "gibberish" are you talking about?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
You read gibberish? Here you go...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-SU870 using xda app-developers app

2old4toys said:
You read gibberish? Here you go...
View attachment 1422215
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Have you tried "USB HOSTS DIAGNOSTICS" by chainfire?
schubeir

Good suggestion!
Results attached
Sent from my LG-SU870 using xda app-developers app

Guys, afaik, you will need either a powered USB OTG cable or you might try connecting your plain OTG cable to a powered USB hub and then connect any devices to the hub. I'm anxious to hear your results since I don't have the "luxury" of ICS yet!

2old4toys said:
Good suggestion!
Results attached View attachment 1427302
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
Hmmm! guess LG ruined it again by ignoring the USB OTG in their kernel. I was so hopeful that we will have usb-otg with ICS! damn!!!
schubeir

I'll give it a try with a powered USB hub this weekend. Worth a shot. Report back afterwards...
Sent from my LG-SU870 using xda app-developers app

Just tried the OTG cable with a wall socket powered USB hub. Then just a mouse into said hub. Same with just a memory stick. Still no good. The cat log shows no related activity when anything is plugged into the OTG cable. Will be able to eliminate the possibility this OTG cable being faulty by checking with a Samsung Note user later today.
Otherwise... now that more of you guys have ICS on your original O3D's, maybe you too can share with us your results with OTG too.
Sent from my LG-SU870 using xda app-developers app

So I've just proved there's nothing wrong with the USB OTG cable since it works fine on a Galaxy Note.
Safe to say we don't get USB OTG support in this official ICS update... sadly...
Sent from my LG-SU870 using xda app-developers app

There is an app called USB OTG Helper v5. It says it needs a compatible kernel but why not try...
Here you go: http://forum.xda-developers.com/showthread.php?t=1588940

2old4toys said:
So I've just proved there's nothing wrong with the USB OTG cable since it works fine on a Galaxy Note.
Safe to say we don't get USB OTG support in this official ICS update... sadly...
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
Even the optimus G does not have OTG yet the nexus 4 the Less Specd Version of the optimus G imo supports it's a Software issue on lg's part

In the thread I mentioned just above, there are links to download custom made modules to use with stock kernels that don't support OTG. The Optimus series is not in the list of supported devices but perhaps iodak could build them for us like he did with the OC modules.

2old4toys said:
So I bought a USB OTG cable. Bloke in the store said they're all the same so long as the connectors fit. Micro USB at one end, female full size USB at the other.
One at a time I tried plugging in a:
USB memory stick
USB keyboard
USB mouse
None of them gave any kind of feedback. The led under the mouse did not even light up.
Maybe just need a powered USB hub? Or a Y cable... one end that boosts the power for USB?
Sent from my LG-SU870 using xda app-developers app
Click to expand...
Click to collapse
Was the Micro Part USB A or B According to ti You Need type A To Switch to Host Mode i think the OTG Driver Active in CM10 any Type B will set MUSB to device mode/slave

Related

CLOSE

CLOSE
Yep, I ordered this one yesterday night. Let's see when this arrives.
Sent from my mobile communication device
How long is the cord?
Camille68 said:
How long is the cord?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-P999 using XDA Premium App
Hope that helps.
Sent from my LG-P999 using XDA Premium App
ski_power said:
Yep, I ordered this one yesterday night. Let's see when this arrives.
Sent from my mobile communication device
Click to expand...
Click to collapse
U should get it tomorrow
Sent from my LG-P999 using XDA Premium App
charlieb620 said:
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
lol iono if its just me but that looks like you put the cable on your back shirtless and someone took a picture of it
Thanks! I went ahead and ordered it. I had originally purchased the one from monoprice, but since I've seen way too many posts saying that it fried the phone, I thought I needed to get one that has been confirmed to work.
c19932 said:
lol iono if its just me but that looks like you put the cable on your back shirtless and someone took a picture of it
Click to expand...
Click to collapse
Can't unsee
Camille68 said:
Thanks! I went ahead and ordered it. I had originally purchased the one from monoprice, but since I've seen way too many posts saying that it fried the phone, I thought I needed to get one that has been confirmed to work.
Click to expand...
Click to collapse
Def works
Sent from my LG-P999 using XDA Premium App
xShadoWxDrifTx said:
Can't unsee
Click to expand...
Click to collapse
??????
Sent from my LG-P999 using XDA Premium App
c19932 said:
lol iono if its just me but that looks like you put the cable on your back shirtless and someone took a picture of it
Click to expand...
Click to collapse
I dont get it
Sent from my LG-P999 using XDA Premium App
charlieb620 said:
Since T-Mobile FAILED at packaging a cable with our devices, I had to go out and find one:
Had this for 2 days now works perfect. Doesnt overheat phone. Doesnt kill phone. Has mirror effect except in youtube. Great for gaming. Great for movies. Seller has good feedback, and fast shipping. Ordered saturday and got it on monday afternoon.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230606880939
Click to expand...
Click to collapse
Wow what a nice comment. Oh hey BTW Tmobile FAILED to include a Wi-Fi router, a Bluetooth headset, a microsd card, and a Roku box to connect to the G2x's DLNA server. Did you happen to pick any of those up by chance while you were at it?
Sent from my LG-P999 using Tapatalk
299792458 said:
Wow what a nice comment. Oh hey BTW Tmobile FAILED to include a Wi-Fi router, a Bluetooth headset, a microsd card, and a Roku box to connect to the G2x's DLNA server. Did you happen to pick any of those up by chance while you were at it?
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
phone comes with 8gb onboard plus i have a 32gb card. wifi router for what????? i dont use bluetooth, and if they included a dlna box the phone would cost way more.
i only bought a hdmi because the last phone i had that required one was my n93. i dont plan on keeping this phone long anyway. i just got the basic accessories to keep the value up.
299792458 said:
Wow what a nice comment. Oh hey BTW Tmobile FAILED to include a Wi-Fi router, a Bluetooth headset, a microsd card, and a Roku box to connect to the G2x's DLNA server. Did you happen to pick any of those up by chance while you were at it?
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
You forgot about a dock, car mount and a pony.
Sent from my LG-P999 using XDA Premium App
got dammit forgot about the pony. sorry guys.
I want my damn promised pony!
I got this cable from Amazon it's working great with no issues so far.
Casio 6ft Micro HDMI (HDMI D Type) to HDMI A Type Cable
c19932 said:
lol iono if its just me but that looks like you put the cable on your back shirtless and someone took a picture of it
Click to expand...
Click to collapse
It looks like the cable is on the carpet.
I guess it has 2 meters long.
Its a dollar forty-five on Amazon? And I just ordered the four ninety-nine one?
mingkee said:
It looks like the cable is on the carpet.
I guess it has 2 meters long.
Click to expand...
Click to collapse
Correct
Sent from my LG-P999 using XDA Premium App

MHL (micro USB to HDMI) adapter works fine!

I just tested today my MHL adapter from monoprice (http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10833&cs_id=1083314&p_id=8805&seq=1&format=2) and it works just fine.
It actually mirrors the phone screen all times but I could not change this behavior.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet! I really dig monoprice... they did me good on hdmi cables.
I was curious to know if your touch inputs on the phone transfer over to the TV set as well. Like a circle appearing where your fingers are touching the screen.
kind of a stupid question but does this remove the phone charging abilities?
methodz said:
kind of a stupid question but does this remove the phone charging abilities?
Click to expand...
Click to collapse
no. there is a micro usb port on the side of the adapter for charging.
In fact, you must have it charging to work.
Seggzy said:
no. there is a micro usb port on the side of the adapter for charging.
In fact, you must have it charging to work.
Click to expand...
Click to collapse
Em. Mine doesn't require power to work.. It does have the power port to charge.
My friend's sgs2 requires power to work.
Sent from my HTC One X using xda premium
When i plug mine in (samsung brand) I only get video and no audio
I've been looking at the ones on amazon but the reviews are all kind of "iffy".
trying to find one that will video output without needing the charger plugged in.
SpYFoXZeRo said:
Em. Mine doesn't require power to work.. It does have the power port to charge.
My friend's sgs2 requires power to work.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Please share with the class which one you have.
PNY MHL Adaptor.
http://www.frys.com/product/6999687?site=sr:SEARCH:MAIN_RSLT_PG
I wish they had a white adapter on monoprice
Doesn't HTC have an official one?
SpYFoXZeRo said:
Em. Mine doesn't require power to work.. It does have the power port to charge.
My friend's sgs2 requires power to work.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I bought the monoprice one and, while it has a charging port, it doesn't require the charging cord to be plugged in in order to work... It just won't charge the phone at the same time if it's not plugged in.
HTH,
Billy
Sent from my HTC One X using Tapatalk 2
JeepFreak said:
I bought the monoprice one and, while it has a charging port, it doesn't require the charging cord to be plugged in in order to work... It just won't charge the phone at the same time if it's not plugged in.
HTH,
Billy
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
The PNY does work, with or without charging(charging works).. I bought 3 and all of them work. I can make a video if anyone need visual confirmation.
Sent from my HTC One X using xda premium
do any of you have a problem with audio on the adapters?
equlizer said:
do any of you have a problem with audio on the adapters?
Click to expand...
Click to collapse
Nope. It works.
Sent from my HTC One X using xda premium
About how much do they cost? Been wanting one
Sent from my HTC One X using xda premium
austin4913 said:
About how much do they cost? Been wanting one
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Well it really depends on the brand and where you buy it from. I bought mine at fry electronic for $20 before tax.
Sent from my HTC One X using xda premium
equlizer said:
do any of you have a problem with audio on the adapters?
Click to expand...
Click to collapse
Negative.
Billy
Sent from my HTC One X using Tapatalk 2
austin4913 said:
About how much do they cost? Been wanting one
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I got the adapter, a 3' HDMI cable, and shipping from Monoprice for like $15. I think the MHL adapter was like $8.
Billy
Sent from my HTC One X using Tapatalk 2
which one on monoprice works without power?

[APP] Skyrocket Charger Test [Now in Google Play]

UPDATE (3/1/2014): Better late than never, the app is now available in the Google Play Store.
DOWNLOAD HERE
This version *should* work for both ICS and JB. I still don't have a Skyrocket, so can someone please download and test and let me know if it works? If it does not, I'll fix ASAP. I'm just publishing the same basic app to the Play Store to make it a little easier for you folks to install it after a flash.
If the Play Store version doesn't work for ICS and/or JB, v0.1 in this thread is for ICS, v0.3 is for JB
I created an app in Tasker's App Factory to test your Skyrocket's charger.
The goal of this app is to help you determine if your charger is providing a fast charge and to see if your charger will cause the dreaded wakelock. You should be able to plug in your charger and launch the app to see your charger type and current reported in the notification bar.
This app was created to accompany my thread on Skyrocket battery life here: http://forum.xda-developers.com/showthread.php?t=1759541
The apk is attached. Just install it and launch the app when you have a charger connected.
For Reference:
The app runs a cat of these files: /sys/class/power_supply/battery/charging_source & /sys/class/power_supply/battery/batt_current_adc
***Version 0.3 for Jelly Bean ROMs cats batt_charging_source instead of charging_source***
It uses charging_source and the values below to determine the charge type
0= No charger connected.
1= USB Normal Charge. There is 5VDC on pins 1&4 and data current is detected on 2&3
2= AC Fast Charge. AC Fast Charge. There is 5VDC on pins 1&4, and pins 2&3 are BRIDGED.
6= AC Regular Charge. This is the charge state that creates the wakelock. There is 5VDC on pins 1&4, and pins 2&3 are OPEN/DISCONNECTED.​
The app uses the batt_current_adc value to determine the charge current. Anything below 500 means your charger provides a normal charge. Anything above that will likely be around 900 and that is considered a fast charge.
The Tasker project XML is attached in the second ZIP if anybody wants to see what the app is doing.
Version 0.1
First attempt
V 0.3
Should work with Jelly Bean
Updated minimum OS to 4.1
Changed cat of "charging_source" to "batt_charging_source"
Installed this and tested it on 3 chargers, official, cheap brand, and car. Seems to work great!
So far all I notice is that it just doesn't launch if the device isn't plugged in (understandably), and the notification icon persists through closing the app (very minor)
I'm going to try it with another skyrocket and some knockoff batteries and will let you know!
Very nice app!
Edit: I'm running CM9 RC2/Nightly, just to give as much info as I can
Sent from my SAMSUNG-SGH-I727 using xda premium
burgeswe said:
Installed this and tested it on 3 chargers, official, cheap brand, and car. Seems to work great!
So far all I notice is that it just doesn't launch if the device isn't plugged in (understandably), and the notification icon persists through closing the app (very minor)
I'm going to try it with another skyrocket and some knockoff batteries and will let you know!
Very nice app!
Edit: I'm running CM9 RC2/Nightly, just to give as much info as I can
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks for the feedback. I was trying to get it to report "No charger connected" when one isn't connected, but couldn't get it working. I'll try adding that again on my next version.
This Is Awesome! It allowed me to figure out which charges in my house were actually doing the trick. Thanks
Hey everything works as you said. Good work.
Sent from my SGH-I727 using xda premium
Excellent, thanks for this. Is there anyway to integrate the wakelock charging check into this as well?
Weazmeister said:
Excellent, thanks for this. Is there anyway to integrate the wakelock charging check into this as well?
Click to expand...
Click to collapse
The app should tell you that your charger will cause a wakelock if it's one that will. Is it not doing that for you?
Mine just says fast charge a/c 903ma in notification area.I'm on cm10
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
holeindalip said:
Mine just says fast charge a/c 903ma in notification area.I'm on cm10
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I'm on AOKP and I also just get #ma. Perhaps I'm referencing back to the post incorrectly but I don't follow how to interpret this to wake lock issue.
Sent from my SGH-I727 using Tapatalk 2
If your charger is recognized as type 6, it will give you a notification like in the attached image. Type 6 causes a wakelock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I'm on CM10. With the USB cable that came with my skyrocket plugged into my computer I get "slow charge @ 461mA. With the SGS3 USB cable it says "Fast Charge @ 502mA."
Have you checked out the Hidden Features app? It seems like some of the features don't work on my phone but has some nice battery info features.
Has anyone tried this app on any other device?
Sent from my SAMSUNG-SGH-I727 using xda premium
Awesome, thank you. Didn't realize that it was part of our already!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
yaiiyaii said:
Has anyone tried this app on any other device?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Doesn't work on my GS3 (I-747)
nothing happens when i open the app at all.
Thanks for this app mate, seem to work very well with all the chargers I have. Now I know which ones I should use.
Great app. Use it often and its never failed to find a bad charger. Looking forward to future updates and to see just how far this app can go
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
my charger, the original one, box and cable both says "fast charger 899Ma"... shouldn't this be 1000ma? i mean am i doing something wrong?
Sent from my SAMSUNG-SGH-I727 using xda premium
Great app for checking charge rate. Keep it up man!
quick question slightly related.
bought new charger... says Charger wakelock 489ma. I bought the usb and it says it is 5v = 2.1a how come it is still not charging like a fast charger? is it cable or the usb plug?
Sent from my SAMSUNG-SGH-I727 using xda premium
droidbabyxda said:
quick question slightly related.
bought new charger... says Charger wakelock 489ma. I bought the usb and it says it is 5v = 2.1a how come it is still not charging like a fast charger? is it cable or the usb plug?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I really need more info before I can tell you anything for sure.
Is the charger the stock Samsung charger or is it one you picked up at walmart or some other store?
My Samsung charger has two parts, the data cable with micro USB on one end that plugs in the phone and USB on the other that plugs into a pc. And the other part is a plug that plugs in the wall and the USB data cable plugs into it. Now is your charger all one piece or is the data cable separate from the wall plug?
Sent from my two cents which ain't worth much.

Problems with 2012 Camaro.

Hey I have a '12 Camaro SS and it has its own USB port (for iPhone and iPod.) But I charge my S3 on it. Every time I connect to it I get this message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't care about music since it has an auxiliary input but I just hate the message. Can I get rid of it? Also the Camaro tries to read it so it's just an awkward silence when the radio goes out can I do anything so my s3 won't be detected but charged.?
Sent from my Verizon Samsung Galaxy S3 4G LTE
Buy a car charger. The computer in your car is incompatible. Much like radios having iPod support. But yours doesn't have android support. You can eliminate the wires which are not needed for charging, but that's risky in its self.
Sent from my SCH-I535 using xda premium
You have two options. The first is to just get a car charger. The other is to enable UMS mode. Doing that would allow your camaro to read the phone as a regular USB thumb drive. I'm not sure if it would work for the internal SD card alone though, but it would definitely solve your problem if you had an external card in there (you could even put music on the card and play that through your car).
Thread:
http://forum.xda-developers.com/showthread.php?t=1785243
So dam jealous of your car is not even funny.
Sent from my SCH-I535 using xda premium
Since cables have molded plugs, you cannot mod them easily. There are two USB cables available that come wired to prevent the phone from getting a data signal on the cable. This would keep both the radio and the phone from sensing each other. There is a problem however. Charging from a USB port most new phones limit their current draw because USB can only supply 500 milliamps (1/2 Amp). When an AC charger is used the phone draws more current and charges significantly faster. Fooling the radio's connection to the phone could result in damage to the USB port.
The use for these cables is to fool the phone when plugged into 12 volt car chargers that have USB connections. Most of these chargers are detected as a USB connection by the phone, and the phone refuses to draw more current. You can see whether the phone thinks it is charging from USB or AC in the settings menu or with many battery widgets.
Amazon has two modded cables one a "Naztech" and the other from PureGear.
xsteven77x said:
So dam jealous of your car is not even funny.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I'll keep my 2011 5.0
To answer your question, you would need to find a USB cord that doesn't support data. That or like everyone else said, buy a car charger.
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
I'll keep my 2011 5.0
To answer your question, you would need to find a USB cord that doesn't support data. That or like everyone else said, buy a car charger.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Car chargers look ugly in new cars : P and I'm happy with my 2012 6.2... bonus pick
The tank wasn't even empty
Sent from my Verizon Samsung Galaxy S3 4G LTE
xsteven77x said:
So dam jealous of your car is not even funny.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Don't be. It's a new car it drinks gas llike it's dehydrated.
Sent from my Verizon Samsung Galaxy S3 4G LTE
salas2324 said:
Car chargers look ugly in new cars : P and I'm happy with my 2012 6.2... bonus pick
The tank wasn't even empty
Sent from my Verizon Samsung Galaxy S3 4G LTE
Click to expand...
Click to collapse
wow id love a 56 dollar fuel bill last fill up mine was 137
salas2324 said:
Car chargers look ugly in new cars : P and I'm happy with my 2012 6.2... bonus pick
The tank wasn't even empty
Sent from my Verizon Samsung Galaxy S3 4G LTE
Click to expand...
Click to collapse
See that's why I love my mustang. DC port is in the center console and you don't even have to see it.
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
See that's why I love my mustang. DC port is in the center console and you don't even have to see it.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Same thing here.
Sent from my Verizon Samsung Galaxy S3 4G LTE
After so long I just realized.
Fast charge mode will do what I wanted from OP.
Sent from my SCH-I535 using Tapatalk 2

Galileo support & HD Voice enable & Quick Charger?

Hi guys,
I have received my XZP (EU version) yesterday, love it so far but I would like to ask few things, pls:
1.) At Sony's page there is a mention that it supports Galileo. But I wasn't able to get any Galileo satelite :/ Does anybody know if it is going to be enabled in some update?
2.) Is there a way to enable something like "HD Voice"? When ppl who got P10, iP7 etc call me, I can hear them like they would standing 1 meter next to me. When I make a call from XZP, nobody noticed anything
3.) Is there a difference between UCH12 & UCH12W charger? I had a UCH20 (so no Quick Charge) one at box and I was wondering which one I should get. Also, could somebody tell a difference in "charging time", pls?
THx a lot
https://talk.sonymobile.com/t5/Wired-accessories/Chargers-UCH12-vs-UCH12W/td-p/1194598
Sent from my G8141 using XDA-Developers Legacy app
sfkaudi said:
https://talk.sonymobile.com/t5/Wired-accessories/Chargers-UCH12-vs-UCH12W/td-p/1194598
Sent from my G8141 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Puff, 2 hours with 50e charger?
I'm not sure I understand why the cable would make a difference. As I understand it, USB C uses a specific pin in the cable for devices and chargers to communicate charging needs.
I guess this could make a difference if the cable isn't actually wired using the USB C standard and rather uses the USB 2 or maybe 3 standard, but you would think that the included cable would be designed appropriately to maximize USB C standards.
Sent from my G8141 using Tapatalk
Jake_09 said:
I'm not sure I understand why the cable would make a difference. As I understand it, USB C uses a specific pin in the cable for devices and chargers to communicate charging needs.
I guess this could make a difference if the cable isn't actually wired using the USB C standard and rather uses the USB 2 or maybe 3 standard, but you would think that the included cable would be designed appropriately to maximize USB C standards.
Sent from my G8141 using Tapatalk
Click to expand...
Click to collapse
Indeed. I am thinking about getting SONY CP-AD3 + UCB32 (I will get Aukey car charger with USB C port tho). But that "HD Audio" thing and Galileo is mystery to me ^^
lesmil said:
Indeed. I am thinking about getting SONY CP-AD3 + UCB32 (I will get Aukey car charger with USB C port tho). But that "HD Audio" thing and Galileo is mystery to me ^^
Click to expand...
Click to collapse
Can you link to the device you mention. I'm curious to look into myself now that you mention it.
Sent from my G8141 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see, Galileo still not in use at least for now
Sent from my G8141 using XDA-Developers Legacy app
CP-AD3 harger is listed only at Czech and India site so far - https://www.sony.cz/electronics/příslušenství-k-přenosné-nabíječce/cp-ad3.
UCB32 cable is here - https://www.sonymobile.com/global-en/products/accessories/usb-type-c-cable-ucb32/
Jake_09 said:
Can you link to the device you mention. I'm curious to look into myself now that you mention it.
Sent from my G8141 using Tapatalk
Click to expand...
Click to collapse
sfkaudi said:
View attachment 4192459
As you can see, Galileo still not in use at least for now
Sent from my G8141 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Well, at brother's p10+ there are 3 galileo satelites listed.
lesmil said:
CP-AD3 harger is listed only at Czech and India site so far - https://www.sony.cz/electronics/příslušenství-k-přenosné-nabíječce/cp-ad3.
UCB32 cable is here - https://www.sonymobile.com/global-en/products/accessories/usb-type-c-cable-ucb32/
Click to expand...
Click to collapse
It looks like that is just another variation of the UCH12W charger, but it's hard to say. Sony's accessories are just plain confusing and difficult to find, and it's really annoying. I ordered the UCH12W from eBay and am just waiting for it to get here because I couldn't find it anywhere else.
Sent from my G8141 using Tapatalk

Categories

Resources