Database Info

HYKURO 6.0r1 on Magic

Just copy update.zip on the SD CARD of rooted Magic and install it.
It works fine for me. Hope this will help you

ilvolodel said:
Just copy update.zip on the SD CARD of rooted Magic and install it.
It works fine for me. Hope this will help you
Click to expand...
Click to collapse
????
why open a new thread for this ????

what new on 6.0r1 in compare to the original magic rom

well, theme and Exchange configurations for email, that doesn't works for now (for me.)

not working wifi and BT, it's not good for magic

look nice but same problem wifi and blut no working.
but now im trying to revert back to my backup with this comands
fastboot erase system -w
fastboot erase boot
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash boot boot.img
fastboot reboot
and it gives a "failed (remote signature verify fail) at the "flash user data.img and fastboot flash boot boot.img"
and after fastboot reboot i am stuck with the vodafone logo on the scrren, bum.
helppppppppppp

guinnes.s said:
look nice but same problem wifi and blut no working.
but now im trying to revert back to my backup with this comands
fastboot erase system -w
fastboot erase boot
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash boot boot.img
fastboot reboot
and it gives a "failed (remote signature verify fail) at the "flash user data.img and fastboot flash boot boot.img"
and after fastboot reboot i am stuck with the vodafone logo on the scrren, bum.
helppppppppppp
Click to expand...
Click to collapse
install the new SPL

is this the one?
http://code.google.com/p/sapphire-port-dream/

i did try apply the new SPL and not it is stuck at
"Formatting CACHE"
what to do now?

guinnes.s said:
i did try apply the new SPL and not it is stuck at
"Formatting CACHE"
what to do now?
Click to expand...
Click to collapse
If you have prompt to reboot avaible...reboot, it's done!

YAP sorted ,thak you HYKURO, i did restore back to my previous back up.
lots of learning with this Android business lol lol

i brick my tf300t: Help??

I to everybody. I bricked my asus tf300t.
When the device power on starts on cwm and i cant shut down because restart on cwm.
I can access to adb, so i've tried to start fastboot whit command
Code:
adb reboot-bootloader
so i've tried to flash to rom stock, but when i start flash the fastboot freeze but windows don't return me any error on cmd.
Any ideas??
Help pls

Aaika said:
I to everybody. I bricked my asus tf300t.
When the device power on starts on cwm and i cant shut down because restart on cwm.
I can access to adb, so i've tried to start fastboot whit command
Code:
adb reboot-bootloader
so i've tried to flash to rom stock, but when i start flash the fastboot freeze but windows don't return me any error on cmd.
Any ideas??
Help pls
Click to expand...
Click to collapse
Your tablet is ****ed up like the ones of many others.... You have to wait for a solution

matt95 said:
Your tablet is ****ed up like the ones of many others.... You have to wait for a solution
Click to expand...
Click to collapse
Mmm i know by myself that my tablet is out. Do you have an idea?

Aaika said:
Mmm i know by myself that my tablet is out. Do you have an idea?
Click to expand...
Click to collapse
I've the same problem. I deleted cwm with this command:
Code:
fastboot -i 0x0b05 erase cache
fastboot -i 0x0b05 erase userdata
fastboot -i 0x0b05 erase recovery
fastboot -i 0x0b05 erase system
and now the device boot and stay block on asus screen, but you can access to fastboot holding Power and Volume -.
Now i'm trying to flash to stock rom.

rizzus said:
I've the same problem. I deleted cwm with this command:
Code:
fastboot -i 0x0b05 erase cache
fastboot -i 0x0b05 erase userdata
fastboot -i 0x0b05 erase recovery
fastboot -i 0x0b05 erase system
and now the device boot and stay block on asus screen, but you can access to fastboot holding Power and Volume -.
Now i'm trying to flash to stock rom.
Click to expand...
Click to collapse
The problem isn't with the recovery, if you flashed the wrong recovery your partition are messed up now and you won't be able to flash anything through fastboot

matt95 said:
The problem isn't with the recovery, if you flashed the wrong recovery your partition are messed up now and you won't be able to flash anything through fastboot
Click to expand...
Click to collapse
But i don't flash anything: i bricked tf300t before start flashing.
When i flash recovery the device won't start. It was only in loop. But the original stock was there.
Can i flash a new recovery? Maybe a TWRP?

UPDATE: before the erases i have the ROM stock and it was starts from fastboot. Can someone, who have the same situation, confirm it?
Inviato dal mio Galaxy Nexus con Tapatalk 2

Bircked Help?

I have anexus 5 that is stuch on the google logo or is stuck in a boot lopp than it gets frozen and when plugegd in the battery logo turns on. I can go into recovery (twrp), but everything on my phone ghas been erased so theres nothing to flash. I tried to use a Nexus 5 toolkit to stock flash but it always comes up with an error. When i try something on twrp it says unable to mount....and give like 5-6 different thinbgs that it cant mount to. Everytime i try to flaash a new bootloader or something from that toolkit the phone turns off and goes into the battery logo. When i use twrp and try to do anything the phone just restarts into recovery. Is there any way i could push factory images to the phone or something else.
BTW, i dont know mucgh in terms of doing stuff with adb and terminal and all that so please be simplistic with the answers. Thanks in advance,.

http://forum.xda-developers.com/showthread.php?t=2513701
[TUTORIAL] How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5
Sent from my Nexus 5

CRIME INC. said:
http://forum.xda-developers.com/showthread.php?t=2513701
[TUTORIAL] How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5
Sent from my Nexus 5
Click to expand...
Click to collapse
So i did this and it failes when at the bootloader and alos at the end it says failure. What to do now?

Irfdiddy said:
So i did this and it failes when at the bootloader and alos at the end it says failure. What to do now?
Click to expand...
Click to collapse
Go to twrp and factory reset it and see if it works..
Write failure means that the eMMC might have died which can only be solved by replacing the mobo.
- Sent from an IceCold Hammerhead!

Irfdiddy said:
So i did this and it failes when at the bootloader and alos at the end it says failure. What to do now?
Click to expand...
Click to collapse
You're being too vague for us to help you. What commands did you enter at the terminal? Word for word what was the error message(s) you received? Did you try flashing the factory image using both the primary and backup bootloader?

BirchBarlow said:
You're being too vague for us to help you. What commands did you enter at the terminal? Word for word what was the error message(s) you received? Did you try flashing the factory image using both the primary and backup bootloader?
Click to expand...
Click to collapse
So i followed the guide in the link posted above. This:
fastboot flash bootloader C:/image-hammerhead-krt16m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-hammerhead-krt16m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-hammerhead-krt16m/system.img
fastboot flash userdata C:/image-hammerhead-krt16m/userdata.img
(Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:/image-hammerhead-krt16m/boot.img
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
fastboot erase cache
Now, i can flash the boot.img, the system.img, the radio, but it hangs up on some of the other ones and it says "erasing..." than i have to stop it casue it doesnt work. Also, when i go into recovery it shows a spinning android logo.
Edit: Ive gotten all the way to "fastboot flash system system.img", but it gets stuck on my phone and says "erasing..."

Irfdiddy said:
So i followed the guide in the link posted above. This:
fastboot flash bootloader C:/image-hammerhead-krt16m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-hammerhead-krt16m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-hammerhead-krt16m/system.img
fastboot flash userdata C:/image-hammerhead-krt16m/userdata.img
(Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:/image-hammerhead-krt16m/boot.img
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
fastboot erase cache
Now, i can flash the boot.img, the system.img, the radio, but it hangs up on some of the other ones and it says "erasing..." than i have to stop it casue it doesnt work. Also, when i go into recovery it shows a spinning android logo.
Edit: Ive gotten all the way to "fastboot flash system system.img", but it gets stuck on my phone and says "erasing..."
Click to expand...
Click to collapse
It will take some minutes to cOmplete the process computer will also hang type of feeling or stop responding for couple of minutes let the program finish its task,...

Irfdiddy said:
So i followed the guide in the link posted above. This:
fastboot flash bootloader C:/image-hammerhead-krt16m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-hammerhead-krt16m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-hammerhead-krt16m/system.img
fastboot flash userdata C:/image-hammerhead-krt16m/userdata.img
(Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:/image-hammerhead-krt16m/boot.img
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
fastboot erase cache
Now, i can flash the boot.img, the system.img, the radio, but it hangs up on some of the other ones and it says "erasing..." than i have to stop it casue it doesnt work. Also, when i go into recovery it shows a spinning android logo.
Edit: Ive gotten all the way to "fastboot flash system system.img", but it gets stuck on my phone and says "erasing..."
Click to expand...
Click to collapse
You're not letting it finish. That's why you're having problems. It can take a long time. It also wouldn't hurt to use the flash-all.bat script instead of flashing each individually.

Nexus 5 Soft-Bricked HELP PLEASE!!!

Although my Nexus 5 is rooted with the toolkit I haven't done anything to it in months (no custom roms or anything)
My phone was working last night but when I woke up and it was in a bootloop.
so i tried fixing the problem myself, here are the things I tried:
- Hitting it (in case the buttons were sticky)
- Flash stock + unroot on the n5 toolkit
- Bootloader>Recovery>Wipe Data/Factory Reset
After that, the boot loop stopped and whenever I try turning it on it goes straight to the bootloader.
So I tried going into the wugfresh advanced utilities and i tried:
- Fastboot Erase*
- Fastboot format*
*flash stock + unroot after both
I have a little bit of hope because I can access the bootloader but I have no idea what else I can try.
Any suggestions?
thank you in advance

Does the bootloader remain unlocked?
Try manually flashing the latest marshmallow. After flashing, boot back into fastboot and run these commands:
fastboot erase userdata
fastboot flash userdata userdata.img (the userdata.img file can be extracted from the stock ROM for flashing in fastboot)
After running the 2 commands, boot back into recovery and perform a full wipe of data and cache, then reboot.

audit13 said:
Does the bootloader remain unlocked?
Try manually flashing the latest marshmallow. After flashing, boot back into fastboot and run these commands:
fastboot erase userdata
fastboot flash userdata userdata.img (the userdata.img file can be extracted from the stock ROM for flashing in fastboot)
After running the 2 commands, boot back into recovery and perform a full wipe of data and cache, then reboot.
Click to expand...
Click to collapse
How do i run the 2 command "fastboot erase userdata" and "fastboot flash userdata userdata.img"

Fastboot on Windows
shbm111 said:
How do i run the 2 command "fastboot erase userdata" and "fastboot flash userdata userdata.img"
Click to expand...
Click to collapse
Hopefully you are running windows
dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone

spacecaptain said:
Hopefully you are running windows
dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone
Click to expand...
Click to collapse
Yup, I'm running windows.
anyways I don't think the nexus toolkit works on any other platform.

spacecaptain said:
Hopefully you are running windows
dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone
Click to expand...
Click to collapse
So, I went through the method one adb setup and I still have no idea how to do the fastboot erase userdata
nvm got it.

Were you able to boot the phone?

I'm in the same situation and need help

[SOLVED] Flashing on Linux

I've recently switched to FerenOS(Unbuntu) tried flashing a spare device but I've run into a block. I've searched extensively but can't find what I need.
Whenever I flashed a stock image on Windows 10, I followed these commands:
fastboot --slot=all flash bootloader bootloader.img
fastboot reboot bootloader
fastboot --slot=all flash radio radio.img
fastboot reboot bootloader
fastboot --slot=(current) --skip-reboot update image.zip
Everything goes good up until flashing the image. The phone stays in fastboot and fails to reboot into fastbootd and start the update with the error "FAILED (remote: Partition system not found)"
I'm able to get to fastbootd by going into recovery and typing adb reboot fastboot. But even trying to sideload from adb doesn't work. It says "adb: command failed to read: success"
My adb is up to date but I can't figure this out. Maybe I'm using the wrong commands? Any help would be appreciated.
Nevermind, it's been solved and the phone unbricked