Just copy update.zip on the SD CARD of rooted Magic and install it.
It works fine for me. Hope this will help you
ilvolodel said:
Just copy update.zip on the SD CARD of rooted Magic and install it.
It works fine for me. Hope this will help you
Click to expand...
Click to collapse
????
why open a new thread for this ????
what new on 6.0r1 in compare to the original magic rom
well, theme and Exchange configurations for email, that doesn't works for now (for me.)
not working wifi and BT, it's not good for magic
look nice but same problem wifi and blut no working.
but now im trying to revert back to my backup with this comands
fastboot erase system -w
fastboot erase boot
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash boot boot.img
fastboot reboot
and it gives a "failed (remote signature verify fail) at the "flash user data.img and fastboot flash boot boot.img"
and after fastboot reboot i am stuck with the vodafone logo on the scrren, bum.
helppppppppppp
guinnes.s said:
look nice but same problem wifi and blut no working.
but now im trying to revert back to my backup with this comands
fastboot erase system -w
fastboot erase boot
fastboot flash system system.img
fastboot flash userdata data.img
fastboot flash boot boot.img
fastboot reboot
and it gives a "failed (remote signature verify fail) at the "flash user data.img and fastboot flash boot boot.img"
and after fastboot reboot i am stuck with the vodafone logo on the scrren, bum.
helppppppppppp
Click to expand...
Click to collapse
install the new SPL
is this the one?
http://code.google.com/p/sapphire-port-dream/
i did try apply the new SPL and not it is stuck at
"Formatting CACHE"
what to do now?
guinnes.s said:
i did try apply the new SPL and not it is stuck at
"Formatting CACHE"
what to do now?
Click to expand...
Click to collapse
If you have prompt to reboot avaible...reboot, it's done!
YAP sorted ,thak you HYKURO, i did restore back to my previous back up.
lots of learning with this Android business lol lol
Related
Help Me!! How to delete cupcake from g1???????
or
Reset phone to factory settings like i just got it from t-mobile.
today i updated and tried the cupcake.
now i wanna go back to my previous status.
i had root access, auto rotate, multi touch, custom splash n boot image amd a theme.
right now i have the custom splash n boot image and cupcake.
Can someone help me.
i have tried to go through fastboot and use fastboot to update <update.zip> but no matter what file i use it says it's unable to load it.
also in fast boot i tried to
commands(after cd-ing to your folder):
fastboot erase boot
fastboot erase recovery
fastboot boot kernel ramdisk.img
fastboot reboot (or press send menu end)
fastboot flash:raw boot kernel ramdisk.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
that worked to install cupcake but when i use
fastboot flash:raw boot kernel ramdisk.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
it gets stuck at
fastboot flash system system.img
or
fastboot flash userdata userdata.img.
can someone help me
just install the rc29 DREAMIMG.nbh in fastboot... then just update your phone with regular updates......
btw here is a link for the rc29
i tried .....
i made sure my dream was in fastboot
i than wrote in cmd
C:\Documents and Settings\*****>fastboot update DREAIMG.nbh
error: failed to load 'DREAIMG.nbh'
**
maybe the DREAIMG.nbh which is 89,419 kb is a bad file???
or i'm just doing something wrong
i think its working now ...
its updatting in progress now
yeay
sorry i didnt explain myself correctly.... download the DREAIMG.nbh... copy the file to your sdcard (make sure its formatted to fat32).... then boot your phone to the bootloader... (turn it off and turn it back on by pressing camera+power).... then install the file....
Make sure you rename it to DREAIMG.NBH
soloxp said:
Make sure you rename it to DREAIMG.NBH
Click to expand...
Click to collapse
right now i,m just trying to get mt g1 to the way i had it
but know its acting up...
i had a similiar issue and i just went to here:
http://forum.xda-developers.com/showthread.php?t=442480
and followed the first part of the instructions to get the phone back down to rc29 and then everything worked fine
imponfire said:
i had a similiar issue and i just went to here:
http://forum.xda-developers.com/showthread.php?t=442480
and followed the first part of the instructions to get the phone back down to rc29 and then everything worked fine
Click to expand...
Click to collapse
ty ty but i already fixed it
this is solved ... by wiping through adb..
adb reboot bootloader
fastboot flash bootloader bootloader-crespo-********.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-********.img
fastboot reboot-bootloader
fastboot -w update image-********.zip
i did this steps but messed up big time at the end.. instead of "fastboot -w update " i did not put -w , before realizing it i already hit the enter button.. need help here.. i tried reflashing back to ics404...but i get the unknown partition error.. what do i do? HELP!!!
similiar errors
Im trying to root, flash boot loader, flash recovery, flash roms, these are the error messages I get when using nvflash tools. Any ideas??
Mario Christian Oquias said:
this is solved ... by wiping through adb..
adb reboot bootloader
fastboot flash bootloader bootloader-crespo-********.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-********.img
fastboot reboot-bootloader
fastboot -w update image-********.zip
i did this steps but messed up big time at the end.. instead of "fastboot -w update " i did not put -w , before realizing it i already hit the enter button.. need help here.. i tried reflashing back to ics404...but i get the unknown partition error.. what do i do? HELP!!!
Click to expand...
Click to collapse
obserrano86 said:
Im trying to root, flash boot loader, flash recovery, flash roms, these are the error messages I get when using nvflash tools. Any ideas??
Click to expand...
Click to collapse
Not familiar with nv tools.. its better to use adb Instead
When i try to flash my factory image 5.0.1 on my nexus 5 (i got twrp recovery and DU rom) i got the message you will see in the picture... What shall i do? Thanks in advance.
Post a screenshot of your folder structure where the fastboot.exe and flash-all.bat are located. I guess you forgot to copy over the zip archive which contains the system.img / cache.img / userdata.img and so on.
experience7 said:
Post a screenshot of your folder structure where the fastboot.exe and flash-all.bat are located. I guess you forgot to copy over the zip archive which contains the system.img / cache.img / userdata.img and so on.
Click to expand...
Click to collapse
ok
Does the image-hammerhead zip file contain system.img file? If not you maybe got a corrupted download and have to d/l the factory image again...
experience7 said:
Does the image-hammerhead zip file contain system.img file? If not you maybe got a corrupted download and have to d/l the factory image again...
Click to expand...
Click to collapse
Yeah it does!..
Okay then try this:
1) Erase all partitions manually like this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
2) Then extract the content of the zip file and flash each img file manually like this:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
Bootloader and radio don't have to be flashed because they have - as I can see in your screenshot - successfully been flashed with the flash-all.bat.
experience7 said:
Okay then try this:
1) Erase all partitions manually like this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
2) Then extract the content of the zip file and flash each img file manually like this:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
Bootloader and radio don't have to be flashed because they have - as I can see in your screenshot - successfully been flashed with the flash-all.bat.
Click to expand...
Click to collapse
Does it need something like "fastboot reboot bootloader" after every command?
experience7 said:
Okay then try this:
1) Erase all partitions manually like this:
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
2) Then extract the content of the zip file and flash each img file manually like this:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
Bootloader and radio don't have to be flashed because they have - as I can see in your screenshot - successfully been flashed with the flash-all.bat.
Click to expand...
Click to collapse
i went to fastboot flash boot boot.img and im stuck on google logo
GiwrgosP- said:
Does it need something like "fastboot reboot bootloader" after every command?
Click to expand...
Click to collapse
Use this tutorial its helped me in past hope it will help you also>http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701 Thanks to> @abaaaabbbb63
Mobile Solutions said:
Use this tutorial its helped me in past hope it will help you also>http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701 Thanks to> @abaaaabbbb63
Click to expand...
Click to collapse
Thats what i did...
GiwrgosP- said:
Thats what i did...
Click to expand...
Click to collapse
Please explain what you did here? use 2nd method
What you did:
fastboot reboot bootloader
That's wrong. It's
fastboot reboot-bootloader
You only flashed stock kernel which is not compatible with DU ROM hence the bootloop.
Never mind. Just turn it off by holding power button. As soon as the screen is off also press vol down to boot in fastboot mode again.
Flash all the partitions like I said without reboot. After you've flashed all partitions type
fastboot reboot-bootloader
experience7 said:
What you did:
fastboot reboot bootloader
That's wrong. It's
fastboot reboot-bootloader
You only flashed stock kernel which is not compatible with DU ROM hence the bootloop.
Never mind. Just turn it off by holding power button. As soon as the screen is off also press vol down to boot in fastboot mode again.
Flash all the partitions like I said without reboot. After you've flashed all partitions type
fastboot reboot-bootloader
Click to expand...
Click to collapse
Thanks doing it right now, hope it works. I will post soon
GiwrgosP- said:
Thanks doing it right now, hope it works. I will post soon
Click to expand...
Click to collapse
Thank you soooooooo much you helped a lot THANKS
No problem mate Don't hesitate to use the forums thanks button if a post was valuable and helpful
experience7 said:
No problem mate Don't hesitate to use the forums thanks button if a post was valuable and helpful
Click to expand...
Click to collapse
I have already done this
Hi guys,
Im from the UK and I have a Moto G XT1032 device which was running Cyanogenmod 12 up until yesterday when I decided to re-install the stock rom. Unfortunately, I have well and truly botched it. The current situation is that I have TWRP set up as the recovery image, so I can get into 'AP Fastboot Flash Mode (S)' OR into TWRP.
I accidentally wiped the 'system' via TWRP which seems to have caused most of my problems. I have tried to install the stock rom using a flashable zip (which failed) and I have also tried around 10 times to install the stock rom using the fastboot commands:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
#fastboot flash system system.img_sparsechunk.3
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
When I try to do a basic wipe using TWRP, this is what shows up: hxxps://s27.postimg.org/r1dax21mb/falcon.jpg (change xx for tt, I don't yet have 10 posts so I cannot post links)
I just cannot seem to get the stock rom installed and booting no matter what I try. Can someone please work with me to get this sorted?
I would very, very much appreciate the help.
Thank you
Ok so i've managed to fix the 'unable to mount storage' issue via TWRP. I changed 'data' to EXT4 and I don't get any errors now.
But the problem is, for whatever reason, I am just unable to install a stock rom. I've used tutorials and still cannot seem to get a stock rom to load/work.
I used fastboot to install the rom files is this zip: XT1032_FALCON_TESCOGBSL_5.1_LPBS23.13-56-2_cid7_CFC.xml.zip
When I do a normal boot it gets stuck on 'Warning bootloader unlocked'
When I go to 'recovery', it boots up to a dead android which says 'no command'
When I go to factory restore, it gets stuck on the 'Warning bootloader unlocked' screen
What am I doing wrong?
edit: I even tried sideloading cyanogenmod and it said it was successful, but then it boots up to TWRP. Totally confused! In desperate need of help.
EDIT: I have now made progress. Here are my basic instructions:
put all the files from the zip file in a folder
put mfastboot.exe files into the same folder
install TWRP, erase
run bat file (add/remove sparse depending on files)
reboot and wait. Should work
I have managed to install the OS but wifi isn't working. And i'm now learning about a file called persist that I need to look into regarding wifi.
Recently I rooted my phone and flash the resurrection remix naught in moto g3 xt1550....
For some reason I start to flash firmware ROM .....but it is not flashing.... Shows " preflash validation failed " and on system image " invalid image" .......... I tried many times but it didn't flash......when I skip the partition gpt file then every image file start flashing and phone start..,..
But their is no network......
After that whenever I switch off or reboot or go to recovery rather than that it start boot loader....
Then I flashed the resurrection remix again..... When I press reboot after flashing then it goes to boot loader......
At boot loader I press power on then it start booting and there is no network in this ROM too......
What can I do now ...... Please help.........
To clear the Fastboot mode, in fastboot enter "fastboot oem fb_mode_clear" and after that it should start the OS without going into fastboot each time.
The fact this is happening leads me to believe your other problem is related... meaning you didn't flash the stock images properly. If you have no network then you need to reflash the radio stack and boot.img file, they must match and you have to erase the modemstX partitions for the radios to work properly.
yes U will get the error of "preflash validation failed" cause of the security update which motorola released for the month of October, January and recent April.... Do one thing again flash the appropriate stock rom according to ur mobile But skip these two steps/Files >>> 1) fastboot flash partition gpt.bin and 2) fastboot flash bootloader bootloader.img and enter the remaining command/or follow the whole procedure but skip these two file mentioned above U will succed:fingers-crossed::good:
For ur simplicity im providing u commands and plz CHECK UR SPARSECHUNK Files it varies according to mobile I have 7 thats y 7 sparsechunk files DO CHECK URs ok>>>>
fastboot oem fb_mode_set
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Do it ur own risk Im not responsible for any damage :laugh:
everything went well except my network .........i checked in about phone < status < imei no is " 0 ".......how to restore that...........i think thats why the network isn't showing.......................
acejavelin said:
To clear the Fastboot mode, in fastboot enter "fastboot oem fb_mode_clear" and after that it should start the OS without going into fastboot each time.
The fact this is happening leads me to believe your other problem is related... meaning you didn't flash the stock images properly. If you have no network then you need to reflash the radio stack and boot.img file, they must match and you have to erase the modemstX partitions for the radios to work properly.
Click to expand...
Click to collapse
where I find radio stack...... I don't know........and I didn't flash the stock images correctly because I have to skip the partition gpt and bootloader......
give me something else to solve it......
btw thanks sir......:good:
heisenberg1546 said:
where I find radio stack...... I don't know........and I didn't flash the stock images correctly because I have to skip the partition gpt and bootloader......
give me something else to solve it......
btw thanks sir......:good:
Click to expand...
Click to collapse
The "radio stack" is the relevant radio portions of the firmware image...
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
It is not uncommon that they don't take the first time, repeat it and the boot.img command. Verify EVERY command returns an OKAY response, if not, repeat it.
And do not copy and paste the commands all at once, type them out and look at the response, or at least copy and paste each command individually.
acejavelin said:
The "radio stack" is the relevant radio portions of the firmware image...
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
It is not uncommon that they don't take the first time, repeat it and the boot.img command. Verify EVERY command returns an OKAY response, if not, repeat it.
And do not copy and paste the commands all at once, type them out and look at the response, or at least copy and paste each command individually.
Click to expand...
Click to collapse
isn't working sir........
I did without copy paste.........
boot img command gives preflash validation failed....
heisenberg1546 said:
It is not uncommon that they don't take the first time, repeat it and the boot.img command. Verify EVERY command returns an OKAY response, if not, repeat it.
And do not copy and paste the commands all at once, type them out and look at the response, or at least copy and paste each command individually.
isn't working sir........
I did without copy paste.........
boot img command gives preflash validation failed....
Click to expand...
Click to collapse
You didn't do the boot.img... but Might want to look at the IMEI 0 recovery thread... I don't have any more ideas.
acejavelin said:
You didn't do the boot.img... but Might want to look at the IMEI 0 recovery thread... I don't have any more ideas.
Click to expand...
Click to collapse
After those commands ...... I flash again all img's including the boot.img......
How to restore the imei file ..... Like in mediatek device ,,, we can write by sn tools .....
heisenberg1546 said:
After those commands ...... I flash again all img's including the boot.img......
How to restore the imei file ..... Like in mediatek device ,,, we can write by sn tools .....
Click to expand...
Click to collapse
I don't know... There is a thread here specifically about it, you will have to look there.
I want to keep the custom rom (RR-O-v6.0.0-20180511-ospreyl) with all networks
acejavelin said:
To clear the Fastboot mode, in fastboot enter "fastboot oem fb_mode_clear" and after that it should start the OS without going into fastboot each time.
The fact this is happening leads me to believe your other problem is related... meaning you didn't flash the stock images properly. If you have no network then you need to reflash the radio stack and boot.img file, they must match and you have to erase the modemstX partitions for the radios to work properly.
Click to expand...
Click to collapse
Hey, I have installed RR-O-v6.0.0-20180511-osprey on Moto G(3rd Generation), and now the error is: "No sim Detected ", IMEI number is fine. I want to flash radio firmware in this custom Rom. Will flashing radio stack of stock rom 6.0.1 (Moto G3 x1550) work?
adb reboot bootloader
fastboot flash modem NON-HLOS.bin (That must of Moto G3?)
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash boot boot.img (Is it to be of RR or of Moto?)
fastboot reboot
Is there any other option or solution then please mention.
You need to flash stock firmware first then your network problem solved then you can install custom roms?
Good Luck!