Hi,
I was trying to install the CM9/10 for my device and I found a link on how to install here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959V/Installing_CyanogenMod_9
I am following the steps, but i am stuck at a place where i have to install CWM 5.0.2.x or higher. I checked their website http://www.clockworkmod.com/rommanager and found version 3.2.0.0. Could you guys please let me know where to find 5.0.2.8?? or suggest an alternative. I am sorry if there was a post similar to this, as i have done extensive search before posting this thread. Thanks in advance, waiting for a reply.
As stated on the wiki page you linked to, you need a kernel with CWM Recovery preinstalled (don't use ROM Manager!)
This page shows you how to flash a kernel onto the device to give you the proper recovery.
Keep reading the wiki, there's lots of good stuff in there to teach you how this device works as far as flashing goes
Thank you!! I was able to install the Kernel and the CM9 ROM....
adithveeresh said:
Thank you!! I was able to install the Kernel and the CM9 ROM....
Click to expand...
Click to collapse
No JB/CM10 yet. Soon as we fix the aries stuff, we'll be on our way!
adithveeresh said:
Thank you!! I was able to install the Kernel and the CM9 ROM....
Click to expand...
Click to collapse
could u tell me where you found the ClockwordMod Recovery (CWM) 5.0.2.x or greater?
crazykidguy said:
could u tell me where you found the ClockwordMod Recovery (CWM) 5.0.2.x or greater?
Click to expand...
Click to collapse
He flashed a kernel that already has it pre-installed. As was suggested in the above post.
Sent from my SGH-T959V using xda premium
Kernel name?
Which kernel did you flash?
SGS4G
Mod version: Octaine Team Acid
Firmware version: 2.3.5
Kernel version: 2.6.35.7-T959vuvki3-cl611444
adithveeresh said:
Thank you!! I was able to install the Kernel and the CM9 ROM....
Click to expand...
Click to collapse
jwgoku said:
Which kernel did you flash?
SGS4G
Mod version: Octaine Team Acid
Firmware version: 2.3.5
Kernel version: 2.6.35.7-T959vuvki3-cl611444
Click to expand...
Click to collapse
Look for bhundven's Blast Off kernel or AntonX's Basic with a Twist in the Development section to then flash CM9 from.
Related
Hi
Im new at this, i looked for a tutorial on what is required in order to install a theme on my G2X
Running 2.3.3 kernl 2.6.32.9 build gri40
I dnload and install fine but i never see the NEW theme on the screen
Thanks in advance for any help.........
jemsTV said:
Hi
Im new at this, i looked for a tutorial on what is required in order to install a theme on my G2X
Running 2.3.3 kernl 2.6.32.9 build gri40
I dnload and install fine but i never see the NEW theme on the screen
Thanks in advance for any help.........
Click to expand...
Click to collapse
What ROM are you running and what theme are you trying to install?
how i know which rom im running? i posted what i found in phone info
thanks
jemsTV said:
how i know which rom im running? i posted what i found in phone info
thanks
Click to expand...
Click to collapse
So i'm assuming stock, and what theme are you trying to install? If its a Theme Engine theme in .apk format, like something you got from the market, then you would need a AOSP based ROM like CM7. If its a theme you downloaded somewhere else, and its in .zip format, then you need to specify which theme and/or where you got it from. Installing themes depend on if they were made for your ROM/phone.
Thanks for the info, is there a write up or section that tells me what is needed to install the cm7rom
thx
jemsTV said:
Thanks for the info, is there a write up or section that tells me what is needed to install the cm7rom
thx
Click to expand...
Click to collapse
If you never modded your g2x before, that means you probably have the stock recovery, you need ClockWorkMod Recovery to flash anything custom, ROMs, kernels, etc. Read this:
http://forum.xda-developers.com/showthread.php?t=1056847
It will walk you through flashing the latest CWM Recovery. Read and follow the directions carefully. When you have CWM Recovery flashing and working properly, then you can visit the Android Development section and find CM7 official, or a nightly. Good luck
i just joint this site and have been searching for roms which i can root to. my phone is currently running 2.3.6 DDKT1. if anyone would just give the link of a ROM which will work on my phone i would be thankful.
all ROMs are gonna run fine. Some good, the others better.
just go to the development section and find a ROM that suits you. Follow the Instructions and you'll be fine.
Try using a program such as ROM Manager, and you'll be screwed.
i see that ur currently using RazaDroid v1.0 at 801MHz. how do i also get it? im new to this so how do i root my device to ur ROM? and is 801MHz stable??
hey man
here can you get it (RAZODROID V1)
http://forum.xda-developers.com/showthread.php?t=1430889
and here for root your device
http://forum.xda-developers.com/showthread.php?t=1252699
i have razodroid v1 on my device with 763 Mhz OC
and it runs fastand thats enough for me
cheers
lomash said:
all ROMs are gonna run fine. Some good, the others better.
just go to the development section and find a ROM that suits you. Follow the Instructions and you'll be fine.
Try using a program such as ROM Manager, and you'll be screwed.
Click to expand...
Click to collapse
are you sure, there gonna be no problem installing all those roms on 2.3.6, because they mentioned to flash it over 2.3.4 !
no, no problems at all.
sid_rangra said:
are you sure, there gonna be no problem installing all those roms on 2.3.6, because they mentioned to flash it over 2.3.4 !
Click to expand...
Click to collapse
yea thats my point of creating the thread. i wanted to know which rom i can flash over my 2.3.6 DDKT1. in other roms they mention to flash only over 2.3.4!
Install Clockworkmod Recovery from here
http://forum.xda-developers.com/showpost.php?p=19204364&postcount=1
Get your desired ROM from the android development section
RazoDroid : http://forum.xda-developers.com/showpost.php?p=21084978&postcount=5
Instructions : http://forum.xda-developers.com/showpost.php?p=21085024&postcount=8
I am going to try it today. Will post the results soon.
lomash said:
Install Clockworkmod Recovery from here
http://forum.xda-developers.com/showpost.php?p=19204364&postcount=1
Get your desired ROM from the android development section
RazoDroid : http://forum.xda-developers.com/showpost.php?p=21084978&postcount=5
Instructions : http://forum.xda-developers.com/showpost.php?p=21085024&postcount=8
Click to expand...
Click to collapse
thanks a lot!! ill do this soon. and post the results if any bugs,etc later.
does anyone have RZrecovery version 2.1.3 or 2.1.4beta for Nexus S "GSM" version?
because I look at these threads:
http://forum.xda-developers.com/showthread.php?t=1309454
http://rootzwiki.com/topic/7309-recovery-rzrecovery-many-devices/
I found this thread, but it has only the cdma/4G version:
http://forum.xda-developers.com/showthread.php?t=1382624
this recovery seems promising, but the download link is dead, so is the dev's website...
does anyone have a backup? or, can someone compile it from the source?
is this compatible with ICS?
any help will be much appreciated, thanks...
Looks like you have an i19020. Since you cant find your desired recovery roms. I would suggest you to than flash a new rom. For eg Cm9, iceandfire..etc
heres the link for CM9 http://forum.xda-developers.com/showthread.php?t=1399035
TigaTiger said:
Looks like you have an i19020. Since you cant find your desired recovery roms. I would suggest you to than flash a new rom. For eg Cm9, iceandfire..etc
heres the link for CM9 http://forum.xda-developers.com/showthread.php?t=1399035
Click to expand...
Click to collapse
yeah, I have an i9020, but this has nothing to do with CM9 or any related roms, I just wanna try that recovery, RZrecovery.
Currently, I'm using CyberGRv10 and don't have any problem with that.
Hello everybody!
My name is James and i am from Singapore, first time posting here on the forums. I have done my due searching for solutions to my query but alas need some direct answers from my sempais over here at XDA.
I have rooted my DS by following this thread: http://forum.xda-developers.com/showthread.php?t=1497604 and got my enlightenment from the splendid mini-guide posted by user "foX2delta"
Now I am on CyanogenMod RC 7.2 and lovin' every moment spent with it. But i have an urging to flash the tiamat kernel over to see if I can get anymore battery life and performance out of the setup. But the problem is this: I have unlocked via HTCdev and rooted via SU. I do not know where to find the Boot.img required for me to flash tiamat onto my DS. Please advise!
Many Thanks,
James.
Edit: Installed Reaper kernel v.1.3 with boot.img included in the zip folder. Thanks rd74!
Don't use Tiamat 1.1.5 kernel with CM7.2 - it's outdated and no longer supported. It won't work as you expect. Try Reaper kernel v.1.3 from this post: http://forum.xda-developers.com/showthread.php?t=1322000
You can flash it through CWM or Ext4 Recovery.
What do you mean by "it's outdated and no longer supported"? Nevertheless, I want to have a try. How did you flash this kernel on previous CM ROM? I can't find the boot.img file as well. Please at least tell me something about that.
I posted the instructions to get the boot.img from Tiamat kernel some time ago. Please look it up, most likely in Q&A.
Haomuch said:
What do you mean by "it's outdated and no longer supported"? Nevertheless, I want to have a try. How did you flash this kernel on previous CM ROM? I can't find the boot.img file as well. Please at least tell me something about that.
Click to expand...
Click to collapse
Recovery has to be flashed first.
then flash the tiamat kernel without wiping.
then enjoy your OverClock Kernel. Smoothy & Faster.
Jack_R1 said:
I posted the instructions to get the boot.img from Tiamat kernel some time ago. Please look it up, most likely in Q&A.
Click to expand...
Click to collapse
Thanks guy I have found that instruction.
http://forum.xda-developers.com/showthread.php?t=1577623
included
Haomuch said:
Thanks guy I have found that instruction.
http://forum.xda-developers.com/showthread.php?t=1577623
Click to expand...
Click to collapse
Great! Thanks for putting a link.
Am so so sorry to ask this question and i dont know if its proper to ask the question,is it possible to flash a baseBAND/radid through recovery.thanks in advance
New BasebandFix by adfad666
It is only temporary and you will have to flash it each time you flash a new baseband rom.
If you revert to a old baseband rom, no fix needed.
Thanks you really helped.hope it works for CM9 AND 10 and not only on CM7
Aragon4realz said:
hope it works for CM9 AND 10 and not only on CM7
Click to expand...
Click to collapse
i think it works in cm9 and should work on cm10 too.:good:
on cm10 and it didn't work for me.
yukice said:
on cm10 and it didn't work for me.
Click to expand...
Click to collapse
Try this..
DOWNLOAD
[HOWTO] Flashing baseband (radio) via LGMDP.exe
Flashing half-broken "fixes" is not any solution.
want to make cwm flashable basebands
id like to make cwm flashable bbs for lg using .fls files.
if any one know it please show me a guide. or a link.
thanks