Database Info

(Crackflashers)(ROM) (wip) Compiled from cm7 source

I have been compiling the cm7 source and sharing. Gapps and rom boots and work. It is more basic gingerbread aosp then cm7. Cyanogen and teamdouche have been working to get this together and this is more kinda like a nightly
www.crackflashers.com
You will need to flash the new recovery.img to flash/get working gapps.
after flashing gapps, run fix permissions to get gapps to work.
This is cause of cm7 going to ext4 based system unlike older roms that are ext3
The new recovery does make it so you can not use older pre gingerbread roms so find a older recovery to fastboot back to anything like froyo or restore old backups
Sent from my HTC Vision using XDA App
Apn might be missing if you can not connect to data. You can find a apn list here at the end of the op http://forum.xda-developers.com/showthread.php?t=892808
Guide to flashing on emmc devices (vision,ace, glacier) change vision to ace for this
http://forum.xda-developers.com/showthread.php?t=909714

So this does not include gapps?
Do you know when cwmr 3.0 will be avail in rom manager?

nandihno said:
So this does not include gapps?
Do you know when cwmr 3.0 will be avail in rom manager?
Click to expand...
Click to collapse
The gapps are posted on on that link also not built in, building in causes bootloops. Don't have any clue when it will be in rom manager, the one uploaded is the recovery.img built with the source
Sent from my HTC Vision using XDA App

so how is this compile compared to kali's release?

Omg more roms to flash. Cheers buddy.

hehe m0x your getting busy
maybe you should start up a review site lets us know whats good and bad

capychimp said:
so how is this compile compared to kali's release?
Click to expand...
Click to collapse
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?

nandihno said:
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
Click to expand...
Click to collapse
I don't know cali's version. I just posted it cause I built it for someone else and he confirmed working. It is repo synced from the cm7 gingerbread source at about 7pm.
I don't have a desire hd so I can not confirm what is or isn't working
Sent from my HTC Vision using XDA App

nandihno said:
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
Click to expand...
Click to collapse
The first RC0 version that was posted wasn't built by kali-

Anyone tired this ?

mero01 said:
Anyone tired this ?
Click to expand...
Click to collapse
Its slightly more advanced along in development than the other version. ADW is now the default launcher. Haven't noticed any difference apart from that.

dr.m0x said:
Its slightly more advanced along in development than the other version. ADW is now the default launcher. Haven't noticed any difference apart from that.
Click to expand...
Click to collapse
seem more stable ?

mero01 said:
seem more stable ?
Click to expand...
Click to collapse
Really it seems the same. Looking good.

dr.m0x said:
Really it seems the same. Looking good.
Click to expand...
Click to collapse
so how did u flash the gapps? via cwm recovery 3.0? or is there another way..
if there is no other way i preffer to wait till rom manager has cwm 3.0...makes things easier and safer
also ..is video camera still not working?

I have just flashed this new Rom using cmw 3.
I had to manually configure my apn.
The video-camera is still not working...
But beside this it is looking good!
Ok, it's not usable for me because i cann't get the network to work

New version up guys.

dr.m0x said:
New version up guys.
Click to expand...
Click to collapse
Where do you find that? Followed the link in first post and its just the same as before. Can you share a link maybe

How do you flash img file normally do it by zip?
HTC HERO - HTC HD2 - NOW HTC DESIRE HD & SAMSUNG GALAXY S Bring on the modding.

nickwarn said:
Where do you find that? Followed the link in first post and its just the same as before. Can you share a link maybe
Click to expand...
Click to collapse
I meant new version since thread started. The 11.30am version. Sorry for any confusion.
Sent by the air.

Anyone tried Bluetooth with this build?
I cant get pairing with my car working with any cyan build yet ...
Just wanted to know if anyone tested this yet
Thx ahead
Sent from my Desire HD using XDA App

Help with Themes installation

Hi
Im new at this, i looked for a tutorial on what is required in order to install a theme on my G2X
Running 2.3.3 kernl 2.6.32.9 build gri40
I dnload and install fine but i never see the NEW theme on the screen
Thanks in advance for any help.........

jemsTV said:
Hi
Im new at this, i looked for a tutorial on what is required in order to install a theme on my G2X
Running 2.3.3 kernl 2.6.32.9 build gri40
I dnload and install fine but i never see the NEW theme on the screen
Thanks in advance for any help.........
Click to expand...
Click to collapse
What ROM are you running and what theme are you trying to install?

how i know which rom im running? i posted what i found in phone info
thanks

jemsTV said:
how i know which rom im running? i posted what i found in phone info
thanks
Click to expand...
Click to collapse
So i'm assuming stock, and what theme are you trying to install? If its a Theme Engine theme in .apk format, like something you got from the market, then you would need a AOSP based ROM like CM7. If its a theme you downloaded somewhere else, and its in .zip format, then you need to specify which theme and/or where you got it from. Installing themes depend on if they were made for your ROM/phone.

Thanks for the info, is there a write up or section that tells me what is needed to install the cm7rom
thx

jemsTV said:
Thanks for the info, is there a write up or section that tells me what is needed to install the cm7rom
thx
Click to expand...
Click to collapse
If you never modded your g2x before, that means you probably have the stock recovery, you need ClockWorkMod Recovery to flash anything custom, ROMs, kernels, etc. Read this:
http://forum.xda-developers.com/showthread.php?t=1056847
It will walk you through flashing the latest CWM Recovery. Read and follow the directions carefully. When you have CWM Recovery flashing and working properly, then you can visit the Android Development section and find CM7 official, or a nightly. Good luck

[Q] status 7 error cm9

im on a nexus s 4g. and when im trying to install brainmaster's cm9 rom from the sd, it gives me the status 7 error, installation aborted. help pleasE?

Upgrade your CWM to the latest version.

it is the latest version. i thought even that was part of the problem.

Harbb said:
Upgrade your CWM to the latest version.
Click to expand...
Click to collapse
it is the latest version. i thought even that was part of the problem.

Is it only happening on brainmasters CM9? Also, are you sure you grabbed the file from the 4G forum (i don't think BM compiles CM9 for the NS4G).

Harbb said:
Is it only happening on brainmasters CM9? Also, are you sure you grabbed the file from the 4G forum (i don't think BM compiles CM9 for the NS4G).
Click to expand...
Click to collapse
other roms do work. and you may be right, that it doesnt support 4G, in that case would you have any recomendations for similar roms and kernals with excellent battery life?

I find solace with Slim, all of the others are great though. It's a matter of trying out a bunch which have the features you want.

Flashing baseband through recovery

Am so so sorry to ask this question and i dont know if its proper to ask the question,is it possible to flash a baseBAND/radid through recovery.thanks in advance

New BasebandFix by adfad666
It is only temporary and you will have to flash it each time you flash a new baseband rom.
If you revert to a old baseband rom, no fix needed.

Thanks you really helped.hope it works for CM9 AND 10 and not only on CM7

Aragon4realz said:
hope it works for CM9 AND 10 and not only on CM7
Click to expand...
Click to collapse
i think it works in cm9 and should work on cm10 too.:good:

on cm10 and it didn't work for me.

yukice said:
on cm10 and it didn't work for me.
Click to expand...
Click to collapse
Try this..
DOWNLOAD

[HOWTO] Flashing baseband (radio) via LGMDP.exe
Flashing half-broken "fixes" is not any solution.

want to make cwm flashable basebands
id like to make cwm flashable bbs for lg using .fls files.
if any one know it please show me a guide. or a link.
thanks

[Q] Help with boot.img

I've spent hours trying to work this out myself, with help from posts on this site, but failed.
I've got an old htc desire c which I've unlocked and rooted. The problem I have is that when I download a zipped custom rom I can't find the 'boot,img' anywhere in the folders. I've dowmloaded, and looked for it in, several different roms.
What am I doing wrong.
I've got a basic grasp of the process, I've also unlooked, rooted and, successfully, flashed a rom to a Wildfire.
Thanks

10rdan said:
I've spent hours trying to work this out myself, with help from posts on this site, but failed.
I've got an old htc desire c which I've unlocked and rooted. The problem I have is that when I download a zipped custom rom I can't find the 'boot,img' anywhere in the folders. I've dowmloaded, and looked for it in, several different roms.
What am I doing wrong.
I've got a basic grasp of the process, I've also unlooked, rooted and, successfully, flashed a rom to a Wildfire.
Thanks
Click to expand...
Click to collapse
if the boot.img(kernel) is not included in the zip then you should search for the compatible kernel..
be specific, which rom are u trying to install?
and can you give me the thread? may be it has something there telling about some kernel..
or
just search for the kernel according to the jellybean rom or ics rom or gingerbread rom..
try flashing different kernels until you get the most compatible one.

herolama said:
if the boot.img(kernel) is not included in the zip then you should search for the compatible kernel..
be specific, which rom are u trying to install?
and can you give me the thread? may be it has something there telling about some kernel..
or
just search for the kernel according to the jellybean rom or ics rom or gingerbread rom..
try flashing different kernels until you get the most compatible one.
Click to expand...
Click to collapse
Thanks for reply.
I've since found a rom with the boot.img included, Sensational, which has a basic sense 5 look.
Flashed and working ok, cheers.

10rdan said:
Thanks for reply.
I've since found a rom with the boot.img included, Sensational, which has a basic sense 5 look.
Flashed and working ok, cheers.
Click to expand...
Click to collapse
great!
cheers!!!:good: