Related
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
masse1369 said:
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
Click to expand...
Click to collapse
Sure just got yesterday. In fact it covers all of the glass portion of the screen. For reference there is no reduction in touch sensitivity with the protector in place.
While I think the cost is high, Martin Fields protectors have always been high quality. This is no exception.
Awesome news! Thanks for the reply!
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...? http://www.martinfields.com/US/prod...oogle_Nexus&modeln=Nexus One&prod_type=screen
uansari1 said:
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...?
Click to expand...
Click to collapse
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Ugh, I want to put down for this sheild but the only thing holding me back is it's not whole body protection!
Thank you for your review! I doubt anyone will have a problem with as details are what matters
Also can you include some random pictures from the Nexus with the Martin Fields Protecter on the camera? I saw the one on their page but i'm always skeptical
It sucks ! had one and started pelling after a week, I keep my phone in my pocket.....now I have invisible shield and THAT one holds.
xavina said:
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Click to expand...
Click to collapse
Thanks so much for your thorough review. Two things though... first, can you please take a pic of the screen for us, especially showing how the fitment is? I believe you when you say it's just barely short, but am just curious. Second, I'm glad to know I'm not the only one who noticed a change in the proximity sensor with these thicker skins.
I'll almost certainly be ordering this product it looks like. One more thing... does it have a guarantee or anything?
Edit: Found this review with installation tips... seems to be just like a Seidio screen protector.
http://the-gadgeteer.com/2004/01/05/martin_fields_overlay_plus_pda_screen_protector_review_/
I've attached a few pictures of the phone and a few taken from the Nexus One
Screen protector
I tried to get as close as possible to the screen to show the edges (Don't mind the Skinomi skin lol).
The one of the camera protector seems clear, but there is one section that is discolored to the rest, that'll be the place I bent lol (bottom half when looking at the picture I took).
Pictures taken from the Phone
There are 2 pictures taken with the phone; one normal and one using the zoom feature.
The picture of the plants are closer, in mid/low light.
The picture of the mountain is further away and in bright light. It's not exactly clear because it's rainy/misty today, sorry for that one.
The last pair is of a magazine in little-no light using the flash as the only source of light.
Warranty
Regarding the warranty, I didn't see mention of anything so I can't really say. If I find anything, I'll be sure to post it.
Thickness
To me, it seems slimmer than the Skinomi Skin because I can feel it almost flush to the metal but it might be my imagination.
I can only upload 8 at a time, so I'll post the others in another post.
These are the remaining photos I took from the phone.
Wow... the fitment looks perfect man. Thanks very much for the pics. Still waiting to hear from Seidio, but this is the front runner. I'll order a new one this week. By the way, I'm jealous that you live near mountains.
Haha, yeah, living in Hawaii has its perks. Wish I could have taken more pictures but I just figured I'd get something posted asap.
If anyone would like to see any specific pictures/angles, I'd be happy to oblige. Like I said though, the camera I have isn't exactly great so quality is kind of lacking.
I'll post again later though seeing how someone had an issue with the protector peeling. I also put my phone into my pocket, so we'll see if it collects lint, peels, etc. So far, my Skinomi seems to be acting like a lint magnet so that may skew results lol.
One last thing of note, I've been hearing word that Martin Fields uses a mild adhesive. With this protector, I guess it's possible that a really mild adhesive is used but I know for sure it's static; depending on which side I'd place a strip of tape close to it, it would actually pull or push the tape in a certain direction. It didn't really feel sticky but I could definitely tell which side needed to be placed on screen; it wasn't smooth on one side.
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
tehkseven's review of martin fields vs dcmugen (generic)
Bicster_ said:
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
Click to expand...
Click to collapse
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
laughter95 said:
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
Click to expand...
Click to collapse
Link to dcmugen?
uansari1 said:
Link to dcmugen?
Click to expand...
Click to collapse
His ebay seller ID is dcmugen88
Thanks, will order some dcmugen88 product. The material sounds the same. His 5 pack is cheap! If it works ok I'll have a new protector every month instead of every year, lol.
I too just ordered (2) of the Anti-Glare ones from dcmugen for $4.49 shipped.
I will report back once I receive it and will give a review.
Just a follow up review, now that I've had the protector on for a little while.
I usually keep my phone in my shirt pocket but I decided to mix it up and
Throw it into my pants pocket (with keys) for the purpose of this review.
Looks
Still very impressed by the looks of the protector. Nothing has changed that
I can tell; no peeling effect, no lint collection (again, could be due to skin
protector lint collection lol).
Scratching
Haha, as mentioned by another reader, this protector does indeed scratch.
Now, here's the funny thing: It didn't scratch due to my keys, but rather my
cleaning cloth.
Some cleaning cloths burn the edges and while I'm usually
careful with those, I figured if this thing has been taking my keys, it should
be able to hold out; not the case.
It's a very deep scratch, so much so that I can feel it under my finger.
The cool thing is though, I cannot see the scratch under normal circumstances.
I can't feel it under normal use either.
Seriously though, I can't even see the scratch under daily use.
Only by flashing direct light can I see the scratch, and by moving my finger
slowly over it can I feel it.
Note: scratch is maybe 1/8th of an inch long.
Clarity
Screen still displays beautifully and pictures are still awesome.
Cleanliness
Still remains pretty clean throughout a few days, only wiping it down every
two or three days. Pretty darn good I guess.
Conclusion
While I'm sort of sick that it got scratched, it's so unnoticable that I haven't
felt the need to replace it. Don't know how long it will last, but if ever
I decide to replace it, I'll post again and give the reasons why.
I'm still quite pleased with this protector and I don't think I'll ever use
anything besides these static cling protectors (be it Martin Fields or another).
hey Xavina. Are you near kea'ahala pl? looks like the pictures are taken from my old house almost haha.
Nevermind. But the bkgrnd is close.
[/IMG]
My old driveway. Anyways off topic ... carry on.
If not, do you have any scratches on the camera glass or the body?
Nope...But I'm a VERY brave person
I had a zagg protector on my original EVO...It eventually fell off and it was later discovered they indeed had Gorilla glass. So I left it off. No scratches. No discernible micro-scratches either. Damn that glass IS tough. No case on it, I never dropped it.
I've only dropped one phone in all my life and that was an HTC Touch (windows mobile) in a Manhattan subway...It had a thin rubber gel like protector and it was fine.
So if you think you'll drop it, then get a case. Otherwise I've never had any issues with phones in my pocket. Completely unprotected Palm Pre and original EVO 4G that I had in my pocket. I did have the EVO 4G from Best Buy that was black and white and the white part of the case discolored a little bit. I don't know if that will happen with the white One X...The material is different...But who knows. That is one thing that did in fact pop to mind when the AT&T stored asked if I wanted to also buy a case.
However, I didn't buy any case or screen protector. If you're worried and have ANY doubt, I would always suggest buying these though. Unless you're just really rich and can buy a new one =) Or have a good insurance plan and don't mind paying the premium haha.
i always use tpu cases since i dropped my last phone and cracked the screen.
no scratches on the body and the camera sits slightly below the case so no scratches there either
I think I might go caseless. I'm mainly worried about the camera, but on the AT&T model is sits in the ring surrounding just enough not to touch a surface when you lay it down.
oh and for what it's worth i may have scratches in my camera on my phones. but minor scratches will go unnoticed because A. it's not the actual lens and even if it was B. cameras work fine with minor scratches on lenses, filters, or any other material covering them because they focus beyond that point. the minimum focus distance could never capture those scratches. they are waaaay blown out. could it make your photo look soft?? maybe... maybe... but the quality isn't exactly perfect on a camera phone anyway.
johnl199 said:
I think I might go caseless. I'm mainly worried about the camera, but on the AT&T model is sits in the ring surrounding just enough not to touch a surface when you lay it down.
Click to expand...
Click to collapse
A grain of sand is large enough to touch that recessed glass if it's on a table.
Edit: Maybe we just got some big ass sand in Florida..
I haven't used cases on my past few phones. After 22 months of being in my pockets with keys and all the rest, my captivate shows a bit of wear, mostly scratches from being dropped (oops), but the screen is still in great condition. I'd expect the One X is hold up even better.
If it gets too unsightly, THEN I'll get case
vioalas said:
A grain of sand is large enough to touch that recessed glass if it's on a table.
Edit: Maybe we just got some big ass sand in Florida..
Click to expand...
Click to collapse
Not really on either of those... yes, sand/salt/etc could scratch lens if the lens was sitting flat, however when you sit your phone down flat, look at it from the side... the phone rests on two points... the metal/plastic rim around the camera and then one towards the bottom of the phone... in turn, there is actually a large gap between the camera lens and the surface.
I've got a screen protector because I prefer the feel, but no case. Had it since Sunday; not a scratch anywhere.
Camera doesn't touch if on a flat surface.
Sent from my HTC One X using XDA
EESteve said:
I've got a screen protector because I prefer the feel, but no case. Had it since Sunday; not a scratch anywhere.
Camera doesn't touch if on a flat surface.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
You prefer the feel of the screen protector? After coming from 2 iPhones this is the best feeling glass my fingers have ever touched. Plus, it seems to be very resistant to fingerprints.
As for a case, I'll probably get a thin silicone one for the ocassions where the phone may be dropped. Will be caseless most of the time.
Sent from my HTC One X using XDA
I don't use a case or screen protector I've dropped it plenty of times quite hard a few times, the back smooth part has very tiny tiny scratches from sliding none on the camera or the screen. I'm ocd about how my phone looks my iPhone 4 had a scratch and I made up some BS story about bad charging to get it replaced but this phones built really well I don't have the 70$ a month warranty from att so knock on wood no issues yet
Sent from my SGH-I777 using xda premium
Until I see a white Otterbox Commuter. Im keeping mine naked. Black/blue case look weird when the white trim of my X shows in the front
Sent from my HTC One X using Tapatalk 2
I think the hox is just to sexy to cover it up with a screen protector or case so going naked. Had a zag on my last phone and a gel case but after a while the screen protector got dirty all around the edges so I took it off and ordered a replacement but by the time I got it I got to used to the natural feel of the screen so I never put it back on and I never liked the feel of the gel case. I've had my hox since last Friday and there's not a mark on it so I'm very pleased with it as is.
Sent from my HTC One X using xda premium
I'm going caseless this time. I used a case (Body Glove) on my Captivate for two years, but never a screen protector, and that screen is still pristine. And I don't really mind scratches elsewhere, although of course I try to avoid them. My phone lives in my left pants pocket, all by itself.
Edit: I'll probably try to get in the habit of setting the phone down face-up, since it does sit on the glass otherwise. The Captivate has very small ridges on the sides so that even face-down it's not on the glass.
No case and no screen protector. I've never been a fan of buying a sleek phone and making it a fatty.
No scratches on phone body or lens.
Naked for me. I love the glass feeling and do not like screen protectors, and likewise with the body: looks and feels best without a case, why mess with it. I've dropped my captivate dozens of times without damage that effects any function besides the open/close usb cover.
I'll be careful, I promise.
Dropping phones is just a matter of how soon for me but still i refuse to use a case. I think it ruins the look and feel of a phone.
So no case for me.
I'm glad to see this thread I have a white hox and have the darn commuter case but I wanna show this thing off .but I'm odd and constantly worried about the Camera lens. What should I do
Again, that's not the lens. It's a piece of glass or plastic on top of the lens. Granted, I doubt you can replace it... My point is that any minor scratches on that won't have an effect on the camera.
I can't say I'm a "professional" photographer because that would imply me getting paid which I haven't been paid for my photography in years...But I DO shoot a LOT with good equipment. That said, I have filters with scratches in them that are still quite usable.
You can't see the scratches in a piece of glass, plastic, etc. that is put directly over top of your lens because the focal point is beyond it. Only if you really really scratch it up will it make a difference. A single scratch alone is not enough. Then factor in the quality of the camera to begin with...You'd never be able to point out the defects in a photo from a few scratches on the case's lens cover. I mean you gotta really scratch it up.
edit -- however, since it's a smaller area, it could take less scratches before you notice a difference... but still, a scratch or two won't make a difference. also, the more you get the softer the image, you could create a permanent "soft focus" filter ha. but i wouldn't worry about a single scratch or two. on top of how small the area for the lens is, i've just never had issues. Attached is a photo my original EVO and all the scratches it took over a 2 year period. There's one larger scratch that actually even covers the area of the lens and I still don't notice it in any shots.
Just click the link, I'm not resizing it and you can't change dimensions through this forum???
http://www.shift8creative.com/temp-stuff/IMAG0001.jpg
Taken with the One X, not bad zoom! =)
mesasone said:
I haven't used cases on my past few phones. After 22 months of being in my pockets with keys and all the rest, my captivate shows a bit of wear, mostly scratches from being dropped (oops), but the screen is still in great condition. I'd expect the One X is hold up even better.
If it gets too unsightly, THEN I'll get case
Click to expand...
Click to collapse
this x10
Hello everybody,
I noteiced the HTC One S seems to lens itself to easily scratching the camera lens which is made of poly carbonate material I heard - which I believe to be very attractive to micro scratches.
I bought the phone second hand but since I got it I've always used a protective case which makes the camera no longer flush with a table or surface it's resting on.
Can anyone confirm if this will have a detrimental effect to photo quality / video quality?
Probably not, the lens cover will be too close to the lens for any of the micro scratches to actually be in focus/visible.
I just looked at my couple month old phone and see zero scratches. While the lens does protrude, the metal ring actually sticks out farther, so just resting it on a flat surface won't scratch it.
Oh man! I was wondering what material was used on the camera lens. Why couldn't it had been gorilla glass's corn whatever thing they use on the screen!? The HD7 had a lot of scratches on the camera. Surprisingly enough, none of that ever showed up on pics. I can't really tell the difference but maybe it could be clearer? Idk looks good for a phone's camera.
I don't want my baby's eye scratched up.
Just picked up the edge two days ago and I love it so far. Got the Skinomi screen protector on the way but does anybody feel the need to cover the camera lens on the back? I know putting on a protector would affect image quality a bit but having it sit on the lens all the time is nerve wrecking.
Also, any idea where to get one? I searched the forums and google but got nothing.
I once owned the HTC One m8, so I know about needing a cover, it was prone to scratches. I just use the extra one I had from it.
I do not know about yours but my AT&T came with a sticker like protection attached. I hate it though. Do not know how I shall remove it.
Hey guys,
Let me first start off with the post before me. Before using your phone you should remove all plastic film from the phone. This includes the front film that covers the phones screen and the plastic square film that covers the camera glass on the back of your phone. I used my fingernails and slowly removed the plastic film on the camera lens from the back of the phone. I noticed after removing the film from the camera on the back, the picture and video quality remains the same, this is due to a cut out in the middle of the square plastic film on the camera on the back of the phone. In conclusion, it doesn't affect quality of any sort on my opinion, but in my personal opinion it looks better without it. Personally, I didn't notice the film on the camera lens until after a week or two of usage. It got steamy and hot in the ktichen and i was taking pictures of food and I noticed air bubbles on the lens... The end.
Lets get back on topic, you can skip the top portion, but that might be too late. Alright if your looking for a camera lens protector for your Edge. I recommend Rasta Banana protector for the Note Edge.
I apologize, since. I'm a new user I cannot post links in my posts yet. You can find it by going to Google and typing "Rasta Banana Note Edge", and you will see it.
If your looking for only a camera lens screen protector only then this is not for you. The package includes a full screen protector for the front of the Edge and its dry apply that covers the whole screen including the Edge screen. Also in the package is the camera lens screen protector too.
I ordered mines today and it's $18 for the package and $3 shipping, and it takes about 7-20 days for delivery for us US buyers.
I'll let you guys know how the screen protector works and the camera lens protector works when it arrives.
Thanks for reading.
Has anyone purchased a tempered glass screen protector for this phone that they like?
Most of the ones I have looked at on amazon have complaints that they interfere with the fingerprint scanner or they have great reviews but aren't even available for another month. LOL.
FireRaider said:
Has anyone purchased a tempered glass screen protector for this phone that they like?
Most of the ones I have looked at on amazon have complaints that they interfere with the fingerprint scanner or they have great reviews but aren't even available for another month. LOL.
Click to expand...
Click to collapse
I m using trink(unbreakable ) bought from shop
I've always gone for a matte protector in the past but there were none on the market and I found myself enjoying the clarity of an unadulterated screen. So I decided to go for tempered glass and bought these
https://www.amazon.co.uk/gp/aw/d/B073T91BR7
Got two in a pack. Wasn't happy with the application of the first one I put on, so pulled it off and used the second one which I am 99% happy with. Small bubble on one extreme edge which really isn't a problem other than it triggers my OCD. In terms of the protector itself, it's a nice feel tempered glass affair and feels no different to the glass of the original screen. My one criticism is that it is slightly smaller than I think it needs to be. It covers the screen area - just. The cut outs at the top are odd (unless there's a sensor next to the front camera that I don't know about. Personally think they'd have been better off not bothering with the top cutouts and just making it a straight line underneath the earpiece. The cutout for the fingerprint sensor fits well. It actually adds height to the well in which the sensor fits, so it kind of guides your finger to the right location. I use the swipe navigation so I suppose time will tell whether it gets in the way on that front.
A 7 out of 10 for me.
I just installed iVoler on my wife's phone.
(https://www.amazon.fr/dp/B074MPC2G2/ref=cm_sw_r_cp_apap_vCJqUdNtCwZGC).
The top cutouts are weird... I messed up my first tgsp trying to align the flash cutout. Gratefully it was a 2-pack.
Managed to install it without any bubble and almost centered. She doesn't do selfies, so the front-facing flash is not important, and it still works well, it's just inelegant imo (cf. pictures)
Other than that it's a fingerprint magnet, it does not adhere well on the sides and on the top left corner, but it does the job ok for now.
I'll see if someone finds a better one and probably change it.
I don't recommend it
Loccy said:
I've always gone for a matte protector in the past but there were none on the market and I found myself enjoying the clarity of an unadulterated screen. So I decided to go for tempered glass and bought these
https://www.amazon.co.uk/gp/aw/d/B073T91BR7
Got two in a pack. Wasn't happy with the application of the first one I put on, so pulled it off and used the second one which I am 99% happy with. Small bubble on one extreme edge which really isn't a problem other than it triggers my OCD. In terms of the protector itself, it's a nice feel tempered glass affair and feels no different to the glass of the original screen. My one criticism is that it is slightly smaller than I think it needs to be. It covers the screen area - just. The cut outs at the top are odd (unless there's a sensor next to the front camera that I don't know about. Personally think they'd have been better off not bothering with the top cutouts and just making it a straight line underneath the earpiece. The cutout for the fingerprint sensor fits well. It actually adds height to the well in which the sensor fits, so it kind of guides your finger to the right location. I use the swipe navigation so I suppose time will tell whether it gets in the way on that front.
A 7 out of 10 for me.
Click to expand...
Click to collapse
Replying to myself here, but downgrading to a 2 out of 10. A few days in and I have a ding in the protector slap bang in the middle of the screen. Someone less OCD than I would probably put up with it but I don't think I can. My eyes keep getting drawn to it.
I have not tried any tempered glass protectors, but I did install these on both my and my wife's phone. It's pretty good, especially the clarity, it's somewhat okay in resisting fingerprints, but when the screen is on, it's hard to notice any fingerprint smudges. If you can't find a tempered glass protector you like, these will do nicely.
[8-Pack] Moto G5S Plus Screen Protector on Amazon
What you think about this, quality?
by dipos - Motorola Moto G5s Plus Screen Protector - 2x dipos Flexible Glass 9H Display Protection?
They're awful, tempered glasses don't go over to the edges because the screen is slightly curved, plus they get super sweaty, reflective and gross in general. Took off mine, won't recommend.
Sent from my Moto G5S Plus using XDA Labs
Use 5d glass buy from Amazon
iRaymee said:
I just installed iVoler on my wife's phone.
(https://www.amazon.fr/dp/B074MPC2G2/ref=cm_sw_r_cp_apap_vCJqUdNtCwZGC).
The top cutouts are weird... I messed up my first tgsp trying to align the flash cutout. Gratefully it was a 2-pack.
Managed to install it without any bubble and almost centered. She doesn't do selfies, so the front-facing flash is not important, and it still works well, it's just inelegant imo (cf. pictures)
Other than that it's a fingerprint magnet, it does not adhere well on the sides and on the top left corner, but it does the job ok for now.
I'll see if someone finds a better one and probably change it.
I don't recommend it
Click to expand...
Click to collapse
Wow, that one looks like it wasn't even made for your phone, the size is too small and the cutout is wrong - surely any model sold specifically for "G5S Plus" should be a better fit?
I bought the same one linked in the 3rd post, but I have NOT put it on yet. The biggest complaint people have with it is "does not go to the edge" . It is not supposed to!
I have the Spigen case with carbon fiber texture inserts. It wraps around the top edges of the g5s+. So a full front protector would either not let the case fit properly AND / OR would push up the edges of the screen protector.