hi there i need Consulting you - General Questions and Answers

i have samsung galaxy s plus and i updated the framware cyanogenmod 9 update 4 but when update 5 come i do the steps as in the thread but in recovry mod when i begin to install the frameware says (( install aborted )) i checked the forum for an answer but i couldn't find anything help me so if anyone know something about this please tell me how to fix this thanks :good:

Try doing complete wipe everything, then reinstall from scratch, like a new installation.
-- Sent from my TouchPad using Communities

Try redownloading the ROM file
Sent from my DROID2 using xda premium

Either the ROM file is badly downloaded . Download again and try
or
you forgot some little steps when doing a wipe. Every little step matters.
Sent from My Premium Calculator HD

Related

Question about custom Rom

Hello Guys
I have a Samsung S5830i phone with Gingerbread.XXLI1. I have rooted the phone successfully. I want to installed RazerDroid Rom. The link is as follows :- http://forum.xda-developers.com/showthread.php?t=1816611. It says that it can be installed from Stock Rom. Is XXLI1 Stock Rom???
Please advise.
Hello girish78,
as far as I know is this the latest Stock Firmware.
I'm new to this but if I'm not mistaken, it depends on the baseband version the rom is based on. Even though yours XXLI1 and its stock, i think there are many more with stock roms for your phone with different baseband versions. I think you should try to ask the developer of the rom to avoid any problems.
Sorry if this wasnt helpful.
carlyle69 said:
I'm new to this but if I'm not mistaken, it depends on the baseband version the rom is based on. Even though yours XXLI1 and its stock, i think there are many more with stock roms for your phone with different baseband versions. I think you should try to ask the developer of the rom to avoid any problems.
Sorry if this wasnt helpful.
Click to expand...
Click to collapse
I am unable to post a question to that thread because I am a new member.....so I am seeking help here mate...
Look in forums under galaxy ace. You may find help more specific to your device.
froyo 2.2 v10l>z4 root>cwm 5.0.2.0>v10e>v10c>mik _os cm7.1>v10c>mik_os>v10c>cwmBRICK>kdz>v10s>kdz>v20g>super 1click>cwm5.0.2.0>amon ra 3.06>cyanogenmod 7.2
sent from my LG p509 using xda app
Is your cwm fully working? Check if it can back up and restore, back up your rom then restore it. If it works then i think it will be ok to install the rom because you have a back up incase anything goes wrong. Remember, there are still risks involved. I went to the link and done some reading, theres no baseband info specified. Goodluck buddy:thumbup:
Sent from my GT-S5300 using xda app-developers app
Mate, I successfully flashed RazoDroid after taking backup of stock rom.
Sent from my GT-S5830i using xda app-developers app
Great stuff :thumbup: enjoy
Sent from my GT-S5300 using xda app-developers app
Rafael Baugis Kernel Update
Hi All
I want to update the kernel and the process mentions me to install boot.img, then install Rom and then install the module. Check this thread.
http://forum.xda-developers.com/showthread.php?t=1818830
Cannot I just install the module to update the kernel????
Please advise.
Its generally a good idea to follow the instructions given by the developer it might work for you if you try it your way but it would really suck if it doesnt. follow the given instructions rather:thumbup:
Sent from my GT-S5300 using xda app-developers app
Mate, I can follow the instructions but it will be a complete from flash. Was wondering if simply flashing the kernel is okay or not.
Sent from my GT-S5830i using xda app-developers app
Please someone advice.....I want to know if simply flashing the kernel is fine or not?
Sent from my GT-S5830i using xda app-developers app
Rafael Baugis kernel update
Friends
Please advise me as to how to update the latest Rafael Baugis kernel. Please help!!!!!

[Q] how to get a backup of stock rom

i would like to try some other rom but first i would like to know how to get a backup of the stock rom first, can you please help me!
After rooting, make a nandroid backup using CWM...
Actually, do it before rooting. Right after flashing cwm, when you first boot in cwm do the backup before flashing the superuser zip.
Sent from my GT-N8010 using Tapatalk HD
Guys can you give me steps please, sorry about that but I am a noobie
Thnx in advance
Sent from my GT-N8000 using Tapatalk 2
Do some search! Info on how to flash cwm is there
ok thnx anyway for your help guys
Mate, this is a forum for big boys and girls, the search function at the top right corner is your best friend. Type in root note 10.1 or something similar, you'll find what you're looking for...:good:
Go to this link this is website dedicated to Note just search and you will find the relevant information
http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Thnx a million
Sent from my GT-N8000 using xda premium

[Q] How to install custom recovery after root?

first things first. I'm a noob. HAHA. but i'm willing to learn.
I recently rooted my phone by using chainfire's CF-AUTO-ROOT and it has stock recovery on it. Now, I want to install a custom recovery, specifically cwm recovery. How will be able to do this? Do I have to unroot then root again? a step by step info will be appreciated. thanks
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Use the search function, read, profit.
Sent high from my SGH-M919
reply
vehvariya said:
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
done finding cwm file that's compatible with my tab
Flashing? not really that well with android terms yet. after clicking "pda" then selecting the cwm file, should I click start? is that what you meant by flashing?
I appreciate your help.
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
reply
vehvariya said:
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Got that! followed exactly what you said and poof - custom recovery. may i ask if you installed a custom rom in your tab 2? and if so, what rom is it?
reply
mymeatb18 said:
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
rom?
vehvariya said:
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I also would like to install cm 10.2. is it stable? I tried searching and I found pac rom and if i'm not mistaken 3 custom roms are installed into 1 rom.
I also would like to ask if it is really necessary to wipe all data before installing a new rom? and if so, would apps like titanium backup pro would be able to backup every single app or information that is in my tab/
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
cm10.1
impliu said:
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
Click to expand...
Click to collapse
I would like to give that a try. do you have any links on where I can find instructions on how to install that? also links on the files that are needed. thanks.
cm10.2
vehvariya said:
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
can you post a link on how to install cm10.2 along with the files that are needed to be downloaded. thanks.
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
superSUnoob said:
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
Click to expand...
Click to collapse
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
ROMaholic
king200 said:
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
Click to expand...
Click to collapse
just noticed that my thread is changing direction
I would like to give that "sicked based ROM" a try. any links to those ROMs? and if im not contented, I can revert back to stock rom right? or can I try the "sicked based ROM" and stock ROM thru dual booting?
reply
vehvariya said:
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
thanks for this info. I will try this before I try the "sicked based ROM" (evil laugh) :laugh:

[Q] its not possible flash any custom roms

Hi everybody, i got seriously problem. I tried all possible solution to flash my i9003 but without any results. Anytime when i try install any zip file with Custom Rom my phone just write message Can't open /sdcard/RemICS.....zip (bad)
Instalation aborted....
What is wrong with it???? Its Galaxy i9003, reflashed with Odin to Gingerbread DDLF2, with root and Custom Recovery. Iam wanna throw it tru window Any ideas please??? I could not find anything when i google it. thanks for any advice.
Try another rom like resurection Remix or cm10.1 alpha9.
Sent from my GT-I9003 using XDA Premium 4 mobile app
don't format system after flashing ddlf2.
directly install 10.2 or any custom rom over it.
procedure =
1) flash ddlf2
2) root it
3) go to recovery and directly install 10.2 or any rom you like.
4) wipe data/reset. (optional)
(don't format anything or else it will give you
that error)
hope this helps you.
thanks
very thanks people, i did it exactly as you recomended, but still i got the same error its my first phone what i can not flash...very sad But thanks for your advice.
Are the Roms that you're trying to flash based on 4.3?
If yes in CWM recovery go to "mounts and storage" and mount all that is unmounted.
Than flash the Rom.
It worked for me.
You can even try to redownload the Rom file, it can be corrupted.
Cheers
Lol, people still use this phone?
pointystar said:
Lol, people still use this phone?
Click to expand...
Click to collapse
Our devs made this device rocks, we have a good development of rom and kernels, better than other high- end devices.
Sent from my GT-I9003 using XDA Premium 4 mobile app
acuicultor said:
Our devs made this device rocks, we have a good development of rom and kernels, better than other high- end devices.
Sent from my GT-I9003 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I had this phone like 4 years ago, my first smartphone ever. Loved it, eventually traded it with my brother for a laptop.

[Q] Can't flash zip.

My old Galaxy Nexus broke so I got a new one and just tried to root it I went through a process I saw on YouTube and it worked up until the point I had to flash the superSU . I am NOT able to flash visit on to my phone it keeps saying aborted. I am using a Mac I am rooting it through the terminal and i already flashed on
Clockwork recovery please someone help Thanks
Sent from my Galaxy Nexus using xda app-developers app
pelé10 said:
My old Galaxy Nexus broke so I got a new one and just tried to root it I went through a process I saw on YouTube and it worked up until the point I had to flash the superSU . I am NOT able to flash visit on to my phone it keeps saying aborted. I am using a Mac I am rooting it through the terminal and i already flashed on
Clockwork recovery please someone help Thanks
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
So you already flashed CWM? Then Download the ZIP file of SuperSU and Flash it with CWM?
Also i Recommend a XDA thread instead of youtube since XDA thread are more secure.
I've tried to flash but its not working.
Sent from my Galaxy Nexus
I tried to flash the superSU but it won't work.
Sent from my Galaxy Nexus
Are you sure its not already ready to go since you rooted if so just download supersu from the google play store and see if that works.
It downloaded but now it says I don't have root access.
Sent from my Galaxy Nexus
It downloaded perfect it works but when I try to use an app such as titanium backup it says I do not have root access. Help
Sent from my Galaxy Nexus

Categories

Resources