Related
Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..
schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.
Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.
I just joined your club. Wow this sucks.
So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?
I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App
Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?
have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331
same problem..... anybody find something to fix this yet?
From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X
Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.
Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Laramie1997 said:
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Click to expand...
Click to collapse
Since I'm in a similar situation have you tried using odin
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I can't put it in download mode, so I can't use ODIN...
sorry i did see that lol what i ment to ask was can you get into the recovery
joka10 said:
sorry i did see that lol what i ment to ask was can you get into the recovery
Click to expand...
Click to collapse
No I can't unless I'm missing something other than power/volume up and down/home button at the same time...
try this instead press all three at the same time volume up, home, and power
joka10 said:
try this instead press all three at the same time volume up, home, and power
Click to expand...
Click to collapse
That's what I've been doing.
Laramie1997 said:
That's what I've been doing.
Click to expand...
Click to collapse
If you have a custom rom still on your sd card, try booting into recovery volume up+home+power and wipe data/ factory reset and then install zip from sdcard.choose your rom and flash.. that should be able to get you to boot up again. I had to do this when my phone would boot up and go blank after the sgs3 logo screen.
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
sorry you thru me off in your post above i thought you saying that you pressing all four my mistake but you can go here http://webchat.freenode.net/?channels= and for the channel use either #verizons3 or #verizons3-dev, they can also help you but of course stay on this thread to.
mustbepbs said:
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
Click to expand...
Click to collapse
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
It makes sense for some phones, but it doesn't make sense that you're unable to get into download mode. Regardless of the incorrect kernel, you should be able to get into download/recovery mode. What is your device registered as when you plug it into your machine (such as QHSUSB_DLOAD)? Are you running Windows/Mac/Linux?
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
mikejr83 said:
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
This is your best bet if nothing else is working. I bought one from China on eBay last year for my GNex. I'm glad I've always got it.
Yea, I ended up having to jig it this morning when I got to the office and had access to my other tools. THAT got it into Download mode and allowed me to flash it back to stock. Bizzare evening for sure.
Thanks for all the help!
For the record...
To get into DOWNLOAD mode you hold home, power, and volume DOWN.
Volume up is for recovery.
Hope that helps.
I've seen the samething
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I've seen the same issue, I was on Senergy and then tried to test CM10, I didn't like it and I went back to Senergy and I flashed it like normal way, however my phone stack on Samsung logo, after 15 minutes pressing all buttons then I was finally able to get recovery, reflashed senegy and it was alright, I Had very less battery, it could be that but not sure..
maybe
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
yeah that's right
Same problem
I had this same problem for a AT&T gs3 but I think my battery died and when I plug it in it won't charge. How can I fix that charging problem and then the start up problem?
background: rooted and was running 4.1 stock and CWM 10.0 on verizon gs3. i wanted to bump up to jelly bean 4.2 with CWM 10.1.
first i tried using Rom Manager and Rom Toolkit to flash a new rom. from Rom Manager, i rebooted into recovery and got stuck on the CWM boot screen.
After 30 minutes or so i pulled the battery and tried flashing the stock .tar.md5 using Odin and ended up with this:
"System software not authorized by verizon wireless has been found on your phone. Please turn off your phone and go to the nearest verizon wireless store for help."
now i can't boot into download or recovery. i just have this screen with the yellow exclamation point and the above message.
how screwed am i? i've tried reading everywhere and from what i can gather i didn't wipe my cache sufficiently, but all the other threads just say 'use Odin to get back to stock', but i can't get into download mode so i can't use odin.
please help.
You're bootloader wasn't unlocked. Pull the battery then hold power, volume down, and home for fifteen or twenty seconds until it boots into download mode. Odin flash a stock rom then root AND ALSO unlock your bootloader.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
You're bootloader wasn't unlocked. Pull the battery then hold power, volume down, and home for fifteen or twenty seconds until it boots into download mode. Odin flash a stock rom then root AND ALSO unlock your bootloader.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I have noticed that a lot of people have not unlocked the bootloader are posting on here that they have "bricked" their phones.
jmxc23 said:
I have noticed that a lot of people have not unlocked the bootloader posted on here that they have "bricked" their phones.
Click to expand...
Click to collapse
Ha, I agree although I think its occurred in decreasing fashion since August. Being "bricked" is used overeagerly by folks not wholly understanding their situation. You really have to try to brick this device before that word can be used correctly.
Your phone has not been bricked. You will know that you have bricked your phone when you can't turn on your phone at all. No download mode and no recovery mode also no pulling of the battery just a dead phone.
ClockworkMod
When you fix your phone, root then unlock the bootloader... You can try RM again but I believe that it is best to use ClockworkMod (or the Touch version) for flashing instead of ROM Manager - old fashion, maybe, but it works!
NOTE: Once you start flashing it becomes addictive - you have been warned
thanks for the comments. my apologies for using the term Brick incorrectly as it seems to really chap the cheeks of some people on this board (http://forum.xda-developers.com/showthread.php?t=2149210)
no luck with holding down buttons with the battery pulled. i ordered a USB Jig to try and force it back into download mode.
From there, what should my first step be? return to stock?
jondotwoz said:
thanks for the comments. my apologies for using the term Brick incorrectly as it seems to really chap the cheeks of some people on this board (http://forum.xda-developers.com/showthread.php?t=2149210)
no luck with holding down buttons with the battery pulled. i ordered a USB Jig to try and force it back into download mode.
From there, what should my first step be? return to stock?
Click to expand...
Click to collapse
youll need to put the battery back in......lol
ddurandSGS3 said:
youll need to put the battery back in......lol
Click to expand...
Click to collapse
obviously. i've tried this a million times. It shows the download screen green android robot and the text in the top left for about 4 seconds. then it goes black and the yellow triangle comes back telling me unauthorized software is on there.
check here. particularly post 2. i think thats what you want.
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=odin
ddurandSGS3 said:
check here. particularly post 2. i think thats what you want.
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=odin
Click to expand...
Click to collapse
thanks that's a very helpful thread. However, i still can't get into download/Odin mode. i'm guessing if/once the USB jig can force the phone into download mode, this is where i'll start.
thanks for everyone's help and patience.
Hi there. I had a stock S4g, had froyo 2.2.1. I Rooted the phone. That went fine. I went to install a new kernel (baliSGS4G) The instal got interrupted, second reboot had the android logo flashing while the normal galaxy s logo was on, so I knew from there it was screwed up...
It booted up fine actually, and i was able to operate around in on the phone, altho the home button didnt work... I went ahead and tried a restart to see what it would do and it would stick at the galaxy s boot screen and the voice would say "restore operation" and just reboot and be stuck on a boot loop...
I CANNOT get into recovery mode UNLESS I remove my sdcard... if I do I CAN... BUT it seems as tho the cwm recover is somewhat useless to me now that the sdcard isnt in.... If I boot into recovery and THEN put the card in, it saws E: Can't mount /sdcard..
Ive tried wipe cache partition, wipe data/factory reset... nothing..
Any suggestions? THankyou!
use any one of the "one clicks".
p.s. gb is a better os
Sent from my Nexus 4 using xda premium
sorry, i've very novice, what do you mean by the one clicks? Like a one click flash program or something?
And yeah, I actually have a galaxy SIII.....the reason i grabbed this one out is i have a little go pro style project im going to do with it and dont want to risk breaking my new phone.
I will try the newer os If i can get this fixed.. Hopefully!
Superbeeblaze said:
sorry, i've very novice, what do you mean by the one clicks? Like a one click flash program or something?
And yeah, I actually have a galaxy SIII.....the reason i grabbed this one out is i have a little go pro style project im going to do with it and dont want to risk breaking my new phone.
I will try the newer os If i can get this fixed.. Hopefully!
Click to expand...
Click to collapse
Second link in signature will help.
Ok Lumin, I did what you said and I am getting to the command promt and it is not seeing my phone, It still shows the phone is disconnected... I have CWM recovery, is that an issue?? That opens when i hold the up,down,up button combo, not the stock download mode screen.
Very well written tutorial btw.
[/COLOR]
Superbeeblaze said:
Hi there. I had a stock S4g, had froyo 2.2.1. I Rooted the phone. That went fine. I went to install a new kernel (baliSGS4G) The instal got interrupted, second reboot had the android logo flashing while the normal galaxy s logo was on, so I knew from there it was screwed up...
It booted up fine actually, and i was able to operate around in on the phone, altho the home button didnt work... I went ahead and tried a restart to see what it would do and it would stick at the galaxy s boot screen and the voice would say "restore operation" and just reboot and be stuck on a boot loop...
I CANNOT get into recovery mode UNLESS I remove my sdcard... if I do I CAN... BUT it seems as tho the cwm recover is somewhat useless to me now that the sdcard isnt in.... If I boot into recovery and THEN put the card in, it saws E: Can't mount /sdcard..
Ive tried wipe cache partition, wipe data/factory reset... nothing..
Any suggestions? THankyou!
Click to expand...
Click to collapse
Try One-Click Gremlin Remover to flash and fix. Found this to be easier than Heimdall for the uninitiated: http://forum.xda-developers.com/showthread.php?t=1500427
1 Open Gremlin remover on PC
2. Remove battery from phone
3. Hold down both the Up and Down on the Volume Rocker
4. Plug Phone into USB (without battery)
5. Insert battery into phone and replace cover
The phone should automatically boot into Download mode, and Gremlin Remover should recognize the phone. This should wipe it back to stock but leave it rooted. Then you can start again. I recommend the SGS Kernel Flasher App to flash new kernels in the future. Much less prone to error.
OK its late, i wasnt reading close enough, I was holding the power button too like an idiot... Got it to work, now my phone boots up like new.
Thanks for the help guys.
I can sleep well tonight. :laugh::good:
ariesgodofwar said:
[/COLOR]Try One-Click Gremlin Remover to flash and fix. Found this to be easier than Heimdall for the uninitiated: http://forum.xda-developers.com/showthread.php?t=1500427
1 Open Gremlin remover on PC
2. Remove battery from phone
3. Hold down both the Up and Down on the Volume Rocker
4. Plug Phone into USB (without battery)
5. Insert battery into phone and replace cover
The phone should automatically boot into Download mode, and Gremlin Remover should recognize the phone. This should wipe it back to stock but leave it rooted. Then you can start again. I recommend the SGS Kernel Flasher App to flash new kernels in the future. Much less prone to error.
Click to expand...
Click to collapse
You might refrain from recommending a different flashing utility (ODIN) when somebody has already started using Heimdall and is just asking for help to finish the process. All you are doing is inviting more problems with driver and USB port issues by doing so. You gave him a simple set of instructions that mentioned nothing about drivers.
And SGS Kernel Flasher is great but it only works properly on our GB ROMs.
lumin30 said:
You might refrain from recommending a different flashing utility (ODIN) when somebody has already started using Heimdall and is just asking for help to finish the process. All you are doing is inviting more problems with driver and USB port issues by doing so. You gave him a simple set of instructions that mentioned nothing about drivers.
And SGS Kernel Flasher is great but it only works properly on our GB ROMs.
Click to expand...
Click to collapse
Oops! Wasn't me.
Sent from my SGH-T959V using xda premium
I was trying to root my Galaxy Tab 2 for the first time. The process started, but failed. Now I'm stuck on the "firmware upgrade encountered an issue" screen. The device will turn off and back on, but remains on error screen. Seems to be trapped in download mode (as I can still see the download progress bar). Go Mobile and Odin say the device has connected to PC.
Anyone know of anything to fix this? Should I just revert to stock ROM and try again later?
davick said:
I was trying to root my Galaxy Tab 2 for the first time. The process started, but failed. Now I'm stuck on the "firmware upgrade encountered an issue" screen. The device will turn off and back on, but remains on error screen. Seems to be trapped in download mode (as I can still see the download progress bar). Go Mobile and Odin say the device has connected to PC.
Anyone know of anything to fix this? Should I just revert to stock ROM and try again later?
Click to expand...
Click to collapse
can you actually boot in to download mode? power and vol down after power off? I know you say it seems to trapped in download mode but they're different! If you can, flash a stock rom from sammobile.com
squ89r97 said:
can you actually boot in to download mode? power and vol down after power off? I know you say it seems to trapped in download mode but they're different! If you can, flash a stock rom from sammobile.com
Click to expand...
Click to collapse
I cannot boot into download mode. When I turn it off, it simply flashes off for a few secs then goes back to the error screen on its own. Does the same thing when I turn it back on myself. No logo screen. No droid. Nothing.
EDIT: Unplugged device entirely and retried the stock ROM in Odin. Finally worked! Looks like it might be fixed now.
davick said:
I cannot boot into download mode. When I turn it off, it simply flashes off for a few secs then goes back to the error screen on its own. Does the same thing when I turn it back on myself. No logo screen. No droid. Nothing.
EDIT: Unplugged device entirely and retried the stock ROM in Odin. Finally worked! Looks like it might be fixed now.
Click to expand...
Click to collapse
Phew, glad to hear it. I've been there myself with the P3110 - take a step back, breath and relax. compose and BOOM! make backups! and backup some more!
squ89r97 said:
Phew, glad to hear it. I've been there myself with the P3110 - take a step back, breath and relax. compose and BOOM! make backups! and backup some more!
Click to expand...
Click to collapse
One can never have too many backups. I back-up EVERYTHING, even software and drivers I know will become outdated eventually.
Thanks for the help. I also pressed the button. Plz don't thanksrage on me! *cowers*
davick said:
One can never have too many backups. I back-up EVERYTHING, even software and drivers I know will become outdated eventually.
Thanks for the help. I also pressed the button. Plz don't Thank Rage on me. *cowers*
Click to expand...
Click to collapse
Better to have them and not need them, than not have them and need them - Thanks for thanking *Shakes fist and shouts "I'll let you off this once"*
davick said:
I cannot boot into download mode. When I turn it off, it simply flashes off for a few secs then goes back to the error screen on its own. Does the same thing when I turn it back on myself. No logo screen. No droid. Nothing.
EDIT: Unplugged device entirely and retried the stock ROM in Odin. Finally worked! Looks like it might be fixed now.
Click to expand...
Click to collapse
It was already in download mode.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I think my cord might have an issue (or they're just testy in general). I was noticing the battery wasn't fully charging for a while before all this. After the whole brick issue, I plugged it in to charge and it started flashing the "loading charge (empty battery + loading circle)" screen on and off until I unplugged and re-plugged it. I suspect that this is why the rooting failed in the first place.
Hi you may use cf auto root for gt p5113 with odin.this happend to me couple days ago.
Sent from my SAMSUNG-SGH-I747 using xda premium
I also bricked my tablet. Searched wide and low for ideas on how to fix. But I can't find a thing. I cannot get into Odin mode or recovery. Just hangs on the battery charging screen. My windows 7 computer can't even recognize it in Kies or odin. Yes the tablet is rooted.