Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Laramie1997 said:
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Click to expand...
Click to collapse
Since I'm in a similar situation have you tried using odin
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I can't put it in download mode, so I can't use ODIN...
sorry i did see that lol what i ment to ask was can you get into the recovery
joka10 said:
sorry i did see that lol what i ment to ask was can you get into the recovery
Click to expand...
Click to collapse
No I can't unless I'm missing something other than power/volume up and down/home button at the same time...
try this instead press all three at the same time volume up, home, and power
joka10 said:
try this instead press all three at the same time volume up, home, and power
Click to expand...
Click to collapse
That's what I've been doing.
Laramie1997 said:
That's what I've been doing.
Click to expand...
Click to collapse
If you have a custom rom still on your sd card, try booting into recovery volume up+home+power and wipe data/ factory reset and then install zip from sdcard.choose your rom and flash.. that should be able to get you to boot up again. I had to do this when my phone would boot up and go blank after the sgs3 logo screen.
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
sorry you thru me off in your post above i thought you saying that you pressing all four my mistake but you can go here http://webchat.freenode.net/?channels= and for the channel use either #verizons3 or #verizons3-dev, they can also help you but of course stay on this thread to.
mustbepbs said:
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
Click to expand...
Click to collapse
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
It makes sense for some phones, but it doesn't make sense that you're unable to get into download mode. Regardless of the incorrect kernel, you should be able to get into download/recovery mode. What is your device registered as when you plug it into your machine (such as QHSUSB_DLOAD)? Are you running Windows/Mac/Linux?
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
mikejr83 said:
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
This is your best bet if nothing else is working. I bought one from China on eBay last year for my GNex. I'm glad I've always got it.
Yea, I ended up having to jig it this morning when I got to the office and had access to my other tools. THAT got it into Download mode and allowed me to flash it back to stock. Bizzare evening for sure.
Thanks for all the help!
For the record...
To get into DOWNLOAD mode you hold home, power, and volume DOWN.
Volume up is for recovery.
Hope that helps.
I've seen the samething
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I've seen the same issue, I was on Senergy and then tried to test CM10, I didn't like it and I went back to Senergy and I flashed it like normal way, however my phone stack on Samsung logo, after 15 minutes pressing all buttons then I was finally able to get recovery, reflashed senegy and it was alright, I Had very less battery, it could be that but not sure..
maybe
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
yeah that's right
Same problem
I had this same problem for a AT&T gs3 but I think my battery died and when I plug it in it won't charge. How can I fix that charging problem and then the start up problem?
Related
I flashed GR-11 the other day and everything was great, but decided to try Mosaic.
I attempted to use Odin One click and got a soft brick. Used my jig to get back into download mode, attempted to reload stock 2.1 and Odin claimed said everything went fine but now my phone is completely unresponsive.
I've tried battery pulls, 3 button combo, my jig. The screen i black and I can't get any response from the phone.
Anyone ran into something similar? No any possible solution?
give these a shot,
1
remove battery count to 5 put in.
DONT TOUCH ANY BUTTON
try jig
2
remove battery
put in jig
put in battery
3
remove battery
plug USB into PC and Phone
hold both volume buttons
put in battery.
did your odin "one click" use tar files? any files?
i hope you say no
Tried all 3 methods you mentioned above and still have nothing.
TRusselo said:
did your odin "one click" use tar files? any files?
i hope you say no
Click to expand...
Click to collapse
Yes it did. ...I'm guessing that's not good?
xxbrysonxx said:
Tried all 3 methods you mentioned above and still have nothing.
Yes it did. ...I'm guessing that's not good?
Click to expand...
Click to collapse
if you had to use .tar files, then it wasnt a ONE CLICK!
this whole ODIN thing has really gotten people baffled lately....i dont get it
if it used any files at all it wasnt odin one click
it was odin flashing utility
BIG DIFFERENCE
odin flashing utility can flash ANYTHING.
odin one click only flashes one thing (no choice) and is ONE CLICK.
you flashed something with a secondary bootloader.
mixed and old one with a new one
you have a brick.
call for warranty and play dumb. "it stopped working"
Possibly Bricked. Defiantly Bricked.
Did you by chance use the one with 3 button fix?
Try pressing the volume down + menu button, then press power and hold all three. Worked for me and I was getting nothing.
Sent from my GT-I9000 using XDA Premium App
This 100% sounds like a hard brick. I'd like to offer a free JTAG service on it if you are out of warranty on the phone. PM me with any questions if you are interested. I just repaired a Captivate in this same condition earlier today.
phone is on infused v2 and is now just looping after i restarted it, samsung samsung samsung.... how to fix this?
aviationmech406 said:
phone is on infused v2 and is now just looping after i restarted it, samsung samsung samsung.... how to fix this?
Click to expand...
Click to collapse
Have you tried anything to fix this......??
if not just pull batt, hold power and both volume up/down at the same time....when the first samsung logo appears let go of power and continue to hold till you get into recovery. should be like 10 sec maybe 15
wipe data factory reset and you should boot past the loop....if not you most likely have to reflash or use the ultimate unbrick.
mine did this when i deleted the lagfix folder by accident (trying to fee up space) i ended up booting into red recovery and disabling voodo lagfix, rebooted then went back in to recovery and re enabled it.
Im not able to get the recovery to come up, everything is jacked, im trying to track down instructions for that ultimate unbrick..
Ok found this http://forum.xda-developers.com/showthread.php?t=1116251&highlight=unbrick but the part where it says make sure your phone is com## in the odin, mine isnt showing up with that?
aviationmech406 said:
Im not able to get the recovery to come up, everything is jacked, im trying to track down instructions for that ultimate unbrick..
Ok found this http://forum.xda-developers.com/showthread.php?t=1116251&highlight=unbrick but the part where it says make sure your phone is com## in the odin, mine isnt showing up with that?
Click to expand...
Click to collapse
Did you get this working? When I was running Infused I had to repeatedly do battery pulls and the three button meth. to get the recovery. Should seriously try to get recovery to start before doing a back to stock.
As for Odin recognizing the phone, did you make sure you have the kies with the drivers installed, did you try different usb ports and/or computers caus sometimes the drivers act funky. Have seen other people have problems with Odin and the drivers.
Got odin to work and its back to stock, only problem i have now is when the date/time is set to automatic it sends it completely off the grid, i have to manually set it which i dont like to do, any quick fix to this?
I'm having a similar problem. My phone is bootlooping and my pc and odin are recognizing it, however the issue is that the phone only turns on for half a second before shutting back off, not allowing me to do anything with it. Anyone know of a way to fix this?
aviationmech406 said:
Got odin to work and its back to stock, only problem i have now is when the date/time is set to automatic it sends it completely off the grid, i have to manually set it which i dont like to do, any quick fix to this?
Click to expand...
Click to collapse
Even on stock? Ive seen this problem with custom roms like dlevrom 5.0 but not on stock? Cruise over there and see what he did to fix it. I believe there is a program called fastfix to force the locales to show up with North America. Nevertheless, check your locale and text in settings to make sure if the correct locale for your area is shown. If not there is a program in the market to force the correct one. Sorry, dont recall the programs name. Maybe the fastfix or fasterfix.
Sent from my SAMSUNG-SGH-I997 using XDA App
Astirnon said:
I'm having a similar problem. My phone is bootlooping and my pc and odin are recognizing it, however the issue is that the phone only turns on for half a second before shutting back off, not allowing me to do anything with it. Anyone know of a way to fix this?
Click to expand...
Click to collapse
Go to either the thread on the Heimdall one click back to stock or the thread on the Unbrickable mod, read up on your download mode access problem and figure which direction to go. Sounds like a soft brick but anything other than a black screen period is salvagable so your all good.
Sent from my SAMSUNG-SGH-I997 using XDA App
Pull battery plug in USB cable hold volume s power buttons insert battery should put you at download screen to odin to stock.
Sent from my SAMSUNG-SGH-I997 using XDA App
JLR9914 said:
Go to either the thread on the Heimdall one click back to stock or the thread on the Unbrickable mod, read up on your download mode access problem and figure which direction to go. Sounds like a soft brick but anything other than a black screen period is salvagable so your all good.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Ok I did both, Odin had a different "modem" I guess so my time was off, I tried the heimdall one and it gave me the gingerbread update which is nice but im having a problem I turn on phone after and after the Samsung comes on it does this sketchy screen with a lot of colors then boots into "atts rethink possible" not sure if anyone can help with that.
aviationmech406 said:
Ok I did both, Odin had a different "modem" I guess so my time was off, I tried the heimdall one and it gave me the gingerbread update which is nice but im having a problem I turn on phone after and after the Samsung comes on it does this sketchy screen with a lot of colors then boots into "atts rethink possible" not sure if anyone can help with that.
Click to expand...
Click to collapse
Sounds like the rainbow thing peeps were getting when they used gb leaks with the froyo bootloaders? You are still booting up fine so that is good. Head over to one of the leaks like UCKJ2 or 4 and study first because the gb bootloaders might solve your rainbow but they are to be used with caution, you could brick your phone real quick.
Sent from my SAMSUNG-SGH-I997 using XDA App
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
IF you ever did nandroid than just restore that otherwise.........
Hey first follow this steps to flash any rom. If you flash the rom properly than you can use any stock rom from dev section and use that.
OR
follow this step to go back to stock and it will unroot you.
Vman7765 said:
Hi all,
My Samsung Galaxy phone is stuck on the Samsung boot up logo. I shut off the phone and it starts up again to the Samsung logo again. I am rooted but still had the stock rom and kernel.
I went to selections and wiped my cache and tried to format it like a new phone. The same thing still happens. I am not sure what else to do. Anyone know how to fix this?
Keep the instructions simple please, if you do know. (I'm a desperate noob)
Thanks for any help.
Click to expand...
Click to collapse
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
I am not sure why it happened but it looks like u cleared cache so that might be the problem. IDK
Vman7765 said:
Great, I'm downloading the drivers now. My phone was working perfectly. Do you know what may have caused this? Thanks.
Click to expand...
Click to collapse
Rocketing on Sky Ics¡
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
first of all to show that you appreciate my help please hit that thnx button. I am running Sky Ice Rom which is deeply themed rom with faux123's kernel.
Vman7765 said:
I'm back up and running. If I want to change my rom and kernel, what do you recommend? I midas well do everything now, while I am on work mode. Thanks for your help.
Click to expand...
Click to collapse
NP thanks for your help. I spammed that button as much as I could lol.
Same Problem
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Follow these steps it will help you go back to stock. ANd reroot your phone.
Barlaw604 said:
My problem is that my Rogers SGSII LTE I727R, is stuck on the logo screen, which is flashing the boot screen. When I connect the USB (even after install of Kies and Odin), my PC does not see the device. I am really not sure what to do. I think I set the wrong phone ID when I installed recovery (I think I was supposed to use the T-Mobil SGSII setting), but I selected something else. I then tried to backup the existing ROM, and am now in this unending loop. Does anyone have any suggestions? Thanks.
Click to expand...
Click to collapse
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try a different USB port. Avoid rear ports and hubs.
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Have you uninstalled kies? If not uninstall it from your PC. Put your phone in download mode and see if Odin can see the phone.
Sent from my SAMSUNG-SGH-I727 using xda premium
Barlaw604 said:
I did try the main process, but the problem seems to be that the my PC/Odin, don't see my phone. The USB drivers are installed, and I have the stock rom, but I can't seem to make the connection.
Click to expand...
Click to collapse
Try another USB port or another computer. If you can get the logo you are in a boot loop, the most common form of a soft brick. If you can get into download mode you should be able to fix it.
---------- Post added at 04:55 PM ---------- Previous post was at 04:46 PM ----------
Barlaw604 said:
OK, i will try that on a different computer, as I have tried all of the available ports on my laptop. Any other thoughts?
Click to expand...
Click to collapse
Just saw this. Have you tried to re-install the drivers?
Another thought is to try turning off firewall and antivirus when using Odin. I've never had my firewall or antivirus block Odin but I've heard it can happen...
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
mimart7 said:
Can you get into download mode? Hold the two volume buttons down, then plug the usb cable into your phone, then you should be in download mode.
Click to expand...
Click to collapse
What he said. Pull the battery and put it back in. Hold volume up/down and plug in USB. Continue holding volume buttons until you see download mode. Careful not to press the power button during this process.
Sent from my SAMSUNG-SGH-I727 using xda premium
I like how u guys are really trying to help him. Let u guys know that on my first responce I gave him all the steps on how to go back to stock. So if he followed that and nothing happened than he should try USB jig if that don't work than its hard brick!!
Rocketing on Sky Ics¡
Barlaw604 said:
I cannot get into download mode. I just keep getting the flashing boot screen, with the corresponding vibration.
Click to expand...
Click to collapse
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
skrambled said:
Don't panic. If you're in a boot loop it's fixable. It's when you get nothing that you need to worry about a hard brick.
Try the button combo mentioned above to get into download mode. If that doesn't work, pull the battery again and try using just the volume down button button--I've heard people say this worked for them when they had a hard time.
If this doesn't get you into download mode, I guarantee you that a jig will work. You can buy one online or make one yourself for about 75 cents and a cut-up data cable (I had a car charger that I didn't need--car charges the phone through USB port, so I cut that one up). Always good to have a jig, at any rate...
Click to expand...
Click to collapse
Yup, when I rooted my phone, the only way I could get it into download was volume DOWN & power.
Sent from my SGH-I727R using xda premium
background: rooted and was running 4.1 stock and CWM 10.0 on verizon gs3. i wanted to bump up to jelly bean 4.2 with CWM 10.1.
first i tried using Rom Manager and Rom Toolkit to flash a new rom. from Rom Manager, i rebooted into recovery and got stuck on the CWM boot screen.
After 30 minutes or so i pulled the battery and tried flashing the stock .tar.md5 using Odin and ended up with this:
"System software not authorized by verizon wireless has been found on your phone. Please turn off your phone and go to the nearest verizon wireless store for help."
now i can't boot into download or recovery. i just have this screen with the yellow exclamation point and the above message.
how screwed am i? i've tried reading everywhere and from what i can gather i didn't wipe my cache sufficiently, but all the other threads just say 'use Odin to get back to stock', but i can't get into download mode so i can't use odin.
please help.
You're bootloader wasn't unlocked. Pull the battery then hold power, volume down, and home for fifteen or twenty seconds until it boots into download mode. Odin flash a stock rom then root AND ALSO unlock your bootloader.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
You're bootloader wasn't unlocked. Pull the battery then hold power, volume down, and home for fifteen or twenty seconds until it boots into download mode. Odin flash a stock rom then root AND ALSO unlock your bootloader.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I have noticed that a lot of people have not unlocked the bootloader are posting on here that they have "bricked" their phones.
jmxc23 said:
I have noticed that a lot of people have not unlocked the bootloader posted on here that they have "bricked" their phones.
Click to expand...
Click to collapse
Ha, I agree although I think its occurred in decreasing fashion since August. Being "bricked" is used overeagerly by folks not wholly understanding their situation. You really have to try to brick this device before that word can be used correctly.
Your phone has not been bricked. You will know that you have bricked your phone when you can't turn on your phone at all. No download mode and no recovery mode also no pulling of the battery just a dead phone.
ClockworkMod
When you fix your phone, root then unlock the bootloader... You can try RM again but I believe that it is best to use ClockworkMod (or the Touch version) for flashing instead of ROM Manager - old fashion, maybe, but it works!
NOTE: Once you start flashing it becomes addictive - you have been warned
thanks for the comments. my apologies for using the term Brick incorrectly as it seems to really chap the cheeks of some people on this board (http://forum.xda-developers.com/showthread.php?t=2149210)
no luck with holding down buttons with the battery pulled. i ordered a USB Jig to try and force it back into download mode.
From there, what should my first step be? return to stock?
jondotwoz said:
thanks for the comments. my apologies for using the term Brick incorrectly as it seems to really chap the cheeks of some people on this board (http://forum.xda-developers.com/showthread.php?t=2149210)
no luck with holding down buttons with the battery pulled. i ordered a USB Jig to try and force it back into download mode.
From there, what should my first step be? return to stock?
Click to expand...
Click to collapse
youll need to put the battery back in......lol
ddurandSGS3 said:
youll need to put the battery back in......lol
Click to expand...
Click to collapse
obviously. i've tried this a million times. It shows the download screen green android robot and the text in the top left for about 4 seconds. then it goes black and the yellow triangle comes back telling me unauthorized software is on there.
check here. particularly post 2. i think thats what you want.
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=odin
ddurandSGS3 said:
check here. particularly post 2. i think thats what you want.
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=odin
Click to expand...
Click to collapse
thanks that's a very helpful thread. However, i still can't get into download/Odin mode. i'm guessing if/once the USB jig can force the phone into download mode, this is where i'll start.
thanks for everyone's help and patience.
i was restoring to an older rom and it said it was restoring boot and then the main maenu came on...it never said it was complete and the menu never comes back on till its done so i figured it was done but now i cant get into recovery or download mode and it gets stuck at the samsung logo..so im screwed ain't i...please help...thanks in advance...
pcrack05 said:
i was restoring to an older rom and it said it was restoring boot and then the main maenu came on...it never said it was complete and the menu never comes back on till its done so i figured it was done but now i cant get into recovery or download mode and it gets stuck at the samsung logo..so im screwed ain't i...please help...thanks in advance...
Click to expand...
Click to collapse
Most likely. Just fubared mine by interrupting a CWM flash thinking it was far enough along to matter. Use this:
http://forum.xda-developers.com/showthread.php?t=1705260
callihn said:
Most likely. Just fubared mine by interrupting a CWM flash thinking it was far enough along to matter. Use this:
http://forum.xda-developers.com/showthread.php?t=1705260
Click to expand...
Click to collapse
how can i use that if i cant get into recovery...?
pcrack05 said:
how can i use that if i cant get into recovery...?
Click to expand...
Click to collapse
Have you had any resolution?
Sent from my SGH-I717 using xda app-developers app
Sorry for the delay, been busy. Try the instructions? Has nothing to do with recovery working. You need odin on your oc and kies ti install the drivers, if it wil go into download mode it can be flashed.
Agreed. Should still be a way to get into download mode, although you may have to use an alternate route. The most reliable method (without extra hardware) is to (once USB cable connected to PC):
Pull battery.
Reinsert battery.
Hold down both volume buttons and plug in the USB cable.
Voila!
Click to expand...
Click to collapse
If that fails, then may need a jig.