Related
So I bricked my Cappy, build 1105, stock 2.2, rooted. I get the dreaded phone-!-pc image with every button combo. I cobbled up a jig real quick, and it gives me the exact same result. Am I just hosed or is the resistance just a little off? I can adjust the resistance a bit, but if this is something one of the resident jug experts has seen before, I'd love to hear what you recommend next.
I'm of the opinion that it is not mine until I've broken it and fixed it!
Thanks!
This happened to me on my last captivate. The jig kept putting me into that screen. Try to see if odin recognizes the phone after you use a jig and get the phone-!-pc screen. If it does it will allow you to flash and you'll be fine. I flashed to stock from that screen and other users have reported the same.
I had this happen with I was flashing odin and ripped the usb cord out on my 1102. I closed odin, removed the usb, reopened odin then used the jig. The jig displayed the error still. I then plugged the usb back in with odin opened and odin recognized my phone while still displaying the error. I was able to flash with odin like this and it worked as it should.
OwenW71 said:
So I bricked my Cappy, build 1105, stock 2.2, rooted. I get the dreaded phone-!-pc image with every button combo. I cobbled up a jig real quick, and it gives me the exact same result. Am I just hosed or is the resistance just a little off? I can adjust the resistance a bit, but if this is something one of the resident jug experts has seen before, I'd love to hear what you recommend next.
I'm of the opinion that it is not mine until I've broken it and fixed it!
Thanks!
Click to expand...
Click to collapse
I have had odin recognize my phone while it was on this screen, I was able to flash UCKF1 one click aswell.
Thanks for all the responses! Since Odin got me to this sad pass, and I never got the three button fix working, should I use the version of Odin that is described in this thread to get things going again?
http://forum.xda-developers.com/showpost.php?p=8802897&postcount=1
Otherwise, I think I'll try Odin One Click again. Thanks!
>>>> Follow up edit...Used Odin One Click 2.2 and it went on just fine. Thanks again!
OwenW71 said:
Thanks for all the responses! Since Odin got me to this sad pass, and I never got the three button fix working, should I use the version of Odin that is described in this thread to get things going again?
http://forum.xda-developers.com/showpost.php?p=8802897&postcount=1
Otherwise, I think I'll try Odin One Click again. Thanks!
>>>> Follow up edit...Used Odin One Click 2.2 and it went on just fine. Thanks again!
Click to expand...
Click to collapse
Im glad to hear all is well
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
dustin4863 said:
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
Click to expand...
Click to collapse
just curious what methode are you using to enter download mode? Did you try recovery for giggles?
i have tried both download mode and recovery and just trying to let it boot up normal and it will not do anything in all three just a black dead screen
Try leaving the battery in when you go to download mode. Also leave it in when flashing.
if it wont even power on in any way or go into the download mode you might be bricked...I did this before and I had to exchange it at Verizon..luckily since it wouldnt turn on they couldnt tell what I did to it...hope you can get your issue resolved
Ha a true brick. Finally someone using the terminology correctly. A buddy of mine has this happen with his galaxy s. He got it exchanged in store no questions asked. btw Sorry to hear about your phone
Sent from my ADR6350 using XDA App
1/2 Brick
Hi
Sorry to hear about your issue. I am at half brick now. Been at multiple spots learning here but never completely no visability! 3/4, 7/8, right now in a flash it does not see my phone (no network) data side is fine but can not get or receive calls. It is not the SIM card (according to VZW). Data side works fine 4G etc, emails but no phone. A great PDA but not a phone. No one has answers but I belive to be a cp_modem.bin issue download hangs at around 98% in what does a boot 2nd boot on the screen in the download then says:
Wait, VIA Booting ..
VIA rest done. ..
Downloading to VIA...
To everyone the {Kangfuscius.tar} has helped me when I thought all hope was lost, even in a partial download it helped to bring me back.
Any suggestions on files for the phone tab in ODIN all I can think of is, it can't get worse. The FEDEX guy kow knows me by name between the Fascinate's and now I guess the Charge.
Any help appreciated,
norm883
norm883 said:
Hi
Sorry to hear about your issue. I am at half brick now. Been at multiple spots learning here but never completely no visability! 3/4, 7/8, right now in a flash it does not see my phone (no network) data side is fine but can not get or receive calls. It is not the SIM card (according to VZW). Data side works fine 4G etc, emails but no phone. A great PDA but not a phone. No one has answers but I belive to be a cp_modem.bin issue download hangs at around 98% in what does a boot 2nd boot on the screen in the download then says:
Wait, VIA Booting ..
VIA rest done. ..
Downloading to VIA...
To everyone the {Kangfuscius.tar} has helped me when I thought all hope was lost, even in a partial download it helped to bring me back.
Any suggestions on files for the phone tab in ODIN all I can think of is, it can't get worse. The FEDEX guy kow knows me by name between the Fascinate's and now I guess the Charge.
Any help appreciated,
norm883
Click to expand...
Click to collapse
I don't know why your phone is booting into 'VIA' mode and don't even know what that is so I couldn't say a fix other than odining the usual stock rom/pit combo (leaving the battery in when flashing in odin also and uncheck the 'auto reboot' option)... also phone tab/button is NOT supposed to be touched in odin, only PDA, PIT if needed, and Start
Where did it fail in the Odin flash? The only way you should be bricked is if it failed while flashing boot.bin or sbl.bin, otherwise, it should still go to download mode. Have you tried using one of the Force Download Mode jigs/dongles that the GSM models use to get into download mode?
i don't recall where it failed at but it will not not respond to anything with batt or without where can i find the gsm software i will give it a try before i call insurance a link or anything would be great
what gsm models are equivalent to the charge
dustin4863 said:
i don't recall where it failed at but it will not not respond to anything with batt or without where can i find the gsm software i will give it a try before i call insurance a link or anything would be great
what gsm models are equivalent to the charge
Click to expand...
Click to collapse
Infuse 4g or SGS 2 unlocked.
Sleek69 said:
Infuse 4g or SGS 2 unlocked.
Click to expand...
Click to collapse
SGS2 is not equivalent. Just search for galaxy s download jig and i'm sure you'll find what I'm talking about. It is the same thing for all the SGS phones, and some have said it works on the 4G versions of the phones as well.
dustin4863 said:
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
Click to expand...
Click to collapse
Hi, I had the same thing happen to my first Charge. I could not boot my phone even to the samsung logo, so I searched around the Internet. Somehow I think it was the Captivate trick worked. I took out sim, battery, sdcard>plugged in usb to computer>held up and down volume together>put in battery; miraculously it went to download. I tried every other combination beforehand and none worked, so I know this method works.
Unfortunately this was before we had IMNUTS Pit file and a odin flash would not change anything so I could not recover and I flashed a Pit that was not for the Charge. Wrong answer! After that it was in the non-boot state again but the same method above would not work any longer. If your phone does not work with the method above, maybe something went wrong with the repartition and pit file. That is just a guess though!
well the jig hasn't worked yet i am running right at 300k tomorrow i am going to get a 1k and add that in also and see if that helps. also pulling all the cards and the battery didn't work either. this is not looking good i am up for any ideas that anyone has
thanks
dustin
Hey guys found a way to unbrick Samsung droid charge and revert back to stock.
1. Download and install Odin found here ( http://forum.xda-developers.com/show....php?t=1085190 ) unzip and open
2.Download this file and unzip ( CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5.7z) from here ( http://www.multiupload.com/6WJ2SFUKO6 ) or original thread where i found this file is from here ( http://androidflip.com/android-2-3-4...talling-guide/ )
3. set phone to download mode, do this by taking battery of phone, plug phone into computer and hold Volume down, a Yellow triangle with a working android will appear.
4. Click on odin you will see your phone come up under ID:COM, now do not click on anywhere but on PDA thats where you will have to find the file you downloaded on step 2 and make sure is the unzipped file. once u find it, click on open then start.
5. Be patient this can take up some time, once is done the box will turn green and say pass, at this time your phone will no longer have the Yellow triangle and you can unplug and place the battery back in and turn phone on.. once again be patient when turning phone on it will take a little while to complete.
i tried this and it does work, my Droid charge was bricked and now it works.
Thanks to xda-developers where i was able to find odin and also thanks to androidflip.com where i was able to find the Droid Charge stock rom to flash it back using odin.
Hope this helped everyone needing help.
dustin4863 said:
well the jig hasn't worked yet i am running right at 300k tomorrow i am going to get a 1k and add that in also and see if that helps. also pulling all the cards and the battery didn't work either. this is not looking good i am up for any ideas that anyone has
thanks
dustin
Click to expand...
Click to collapse
Dustin, were you able to get it working? I'm in the same boat. Right after boot.bin it failed. Which was within seconds after hitting the start button in Odin. Verizon won't honor my warranty, because I didn't buy the phone from them.
Hard Brick Fixed
If you are truly hard bricked (no download mode, no power, no nothing), you can get it fixed for $40 at mobiletechvideos.com. I flashed a file that didn't work unless I took off the md5 extension. Big mistake. After trying absolutely everything, including surfing the internet for a day, spending almost $20 to get 2 day delivery for a USB Jig that did absolutely nothing, I sent my phone to mobiletechvideos.com. Josh brought it back from the dead; don't know how, but it was the best $40 I ever spent! I think there aren't any reviews because there haven't been enough newbies like me who just can't wait for Gingerbread and bricked their Samsung Charge. Putting my review there tonight...should be first one. The reviews from all the other phones he has unbricked convinced me to try and I'm glad I did.
Many people have hard bricked their phones trying to downgrade. Give the jig a shot, but don't hold out much hope.
Personally I think there is something being overlooked during the downgrade process... Too many people are hard-bricking during the process for it to be coincidence.
Oh yes
mgsparro said:
If you are truly hard bricked (no download mode, no power, no nothing), you can get it fixed for $40 at mobiletechvideos.com. I flashed a file that didn't work unless I took off the md5 extension. Big mistake. After trying absolutely everything, including surfing the internet for a day, spending almost $20 to get 2 day delivery for a USB Jig that did absolutely nothing, I sent my phone to mobiletechvideos.com. Josh brought it back from the dead; don't know how, but it was the best $40 I ever spent! I think there aren't any reviews because there haven't been enough newbies like me who just can't wait for Gingerbread and bricked their Samsung Charge. Putting my review there tonight...should be first one. The reviews from all the other phones he has unbricked convinced me to try and I'm glad I did.
Click to expand...
Click to collapse
Doing so NOW! For the same issue. My PC decided to spontaneously reboot during ODIN while flashing a ROM on My Droid Charge. Josh was quick to respond to EVERY single annoying question I had about their service. So I am doing so. If it works, I'll tell you, I'm adding a link to their site in my signature on every forum I'm a member of, even forums I have for my daughter's schooling hahaha! They deserve the references just for being quick to respond. Thanks for the info man, props to you.
ODIN doesn't seem to want to install any kind of odin file that I put into it on my phone.
It gets stuck at dbdata.rfs and then it just remains there for over 2 minutes.
Tried to pop the battery back in once it got there, but that didn't work either.
Also can't get into recovery, by pressing volume down + power key.
You should know my phone died 2 days ago, and I used ODIN to bring it back to life. By died I mean it would bootloop to the recovery and then it finally gave me the bootloader=7 error after which it would just boot into the samsung recovery and nothing else.
Does this mean I will be stuck with a phone that I cannot root or backup or even install a custom rom?
thizzmaster said:
ODIN doesn't seem to want to install any kind of odin file that I put into it on my phone.
It gets stuck at dbdata.rfs and then it just remains there for over 2 minutes.
Tried to pop the battery back in once it got there, but that didn't work either.
Also can't get into recovery, by pressing volume down + power key.
You should know my phone died 2 days ago, and I used ODIN to bring it back to life. By died I mean it would bootloop to the recovery and then it finally gave me the bootloader=7 error after which it would just boot into the samsung recovery and nothing else.
Does this mean I will be stuck with a phone that I cannot root or backup or even install a custom rom?
Click to expand...
Click to collapse
try leaving the battery in for the whole flash, also recovery is volume up+home button+power
blazing through on my 4G Droid Charge
I also tried leaving the battery in for the whole flash process as well, for some reason ODIN is super slow even on my comp which is not the least bit slow for the specs(3.8ghz amd 545 with 4 gb of ram ddr1666) so I do not know why it would be so slow either. when the flash is done it says 134:00 minutes and whatever rom I flash doesn't actually get flashed, it just sticks to the stock ram.
i can't even install a recovery on the phone either, and can't even get root for some reason, maybe the one click root i am using might be outdated or something.
actually just tried to do the recovery mode, but it only got me to the samsung recovery not the clockworkmod recovery. even after I had a successful flash of the odin for the recovery portion.
Are you using the PDA section? Leaving repartition UNchecked?
i was using the phone section, but whats the difference, isn't it all the same? and yes i was leaving the partition unchecked.
thizzmaster said:
i was using the phone section, but whats the difference, isn't it all the same? and yes i was leaving the partition unchecked.
Click to expand...
Click to collapse
that's your problem right there, DO NOT use any section except PDA and PIT for flashing stuff with Odin... try again with it in PDA and you should be able to boot into it and it'll work fine
PHONE SECTION = BAD! NEVER EVER use the phone section! It can cause some seriously bad issues, the most problematic being the infamous brick(unrecoverable).
thizzmaster said:
maybe the one click root i am using might be outdated or something.
Click to expand...
Click to collapse
These don't work for the Charge.
Sent from my Droid Charge running GummyCharged 2.0
thizzmaster said:
i was using the phone section, but whats the difference, isn't it all the same? and yes i was leaving the partition unchecked.
Click to expand...
Click to collapse
...Have you not read ANY of the tutorials??? If you want to brick you're phone (you'd be one of the few and the proud, because you really have to try to do it), then keep on using the phone section and have a $500 paperweight.
hazard209 said:
...Have you not read ANY of the tutorials??? If you want to brick you're phone (you'd be one of the few and the proud, because you really have to try to do it), then keep on using the phone section and have a $500 paperweight.
Click to expand...
Click to collapse
Haha. We should let him brick it.
Sent from my Droid Charge running GummyCharged 2.0
That was a little mean on my part... But come on people, please read thoroughly through the tutorials, how to's, and OPs before posting about a problem. Actually even before doing ANYTHING to your phone. Use the search, it's there for a reason. Users and Devs have taken the time to compile all of this for you and you've just wasted their time and insulted them by ignoring it.
Ok. Done ranting. Thizzmaster, sorry for the outburst. For future reference always use the PDA section for .tar.md5 files for your Charge. It matters and there is a difference.
Last time i checked, Most of these superphones are actually super pda's with phone capabilities.
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Laramie1997 said:
Ok, here's where I'm at...
Rooted/Kexec installed
Flashed several ROM's over the last two weeks or so with no issue.
Never did a backup and restore.
Flashed a CM10 Invisitek(?) ROM today and didn't like it.
Before I flashed it, I made a backup of my XTC install.
Tried to restore that XTC and it failed.
Tried to restore again and it said that it passed and I rebooted.
Now, when you turn the phone on, it will boot up to Samsung Custom with a lock icon then flash the Samsung Galaxy SIII screen.
Once it flashes the second screen, it will go to a blank screen and that's it.
I've tried to get the phone into Download mode by pressing both volume keys, home and power at the same time and it boots as described above.
Any nudges in the right direction? :fingers-crossed:
Click to expand...
Click to collapse
Since I'm in a similar situation have you tried using odin
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I can't put it in download mode, so I can't use ODIN...
sorry i did see that lol what i ment to ask was can you get into the recovery
joka10 said:
sorry i did see that lol what i ment to ask was can you get into the recovery
Click to expand...
Click to collapse
No I can't unless I'm missing something other than power/volume up and down/home button at the same time...
try this instead press all three at the same time volume up, home, and power
joka10 said:
try this instead press all three at the same time volume up, home, and power
Click to expand...
Click to collapse
That's what I've been doing.
Laramie1997 said:
That's what I've been doing.
Click to expand...
Click to collapse
If you have a custom rom still on your sd card, try booting into recovery volume up+home+power and wipe data/ factory reset and then install zip from sdcard.choose your rom and flash.. that should be able to get you to boot up again. I had to do this when my phone would boot up and go blank after the sgs3 logo screen.
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
sorry you thru me off in your post above i thought you saying that you pressing all four my mistake but you can go here http://webchat.freenode.net/?channels= and for the channel use either #verizons3 or #verizons3-dev, they can also help you but of course stay on this thread to.
mustbepbs said:
Do those two ROMs use different kernels? Because if that's the case, there's your problem. To my knowledge, CWM doesn't backup kernels, so restoring a nandroid wouldn't restore the kernel needed for that particular ROM to function. At least, that's how it was for my old Xperia Play. You needed to flash the new kernel before the ROM to ensure it would boot. With kexec, that's a little different.
But, I could be totally off base. Just throwing my limited knowledge out there for someone to maybe expound upon.
Click to expand...
Click to collapse
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
It makes sense for some phones, but it doesn't make sense that you're unable to get into download mode. Regardless of the incorrect kernel, you should be able to get into download/recovery mode. What is your device registered as when you plug it into your machine (such as QHSUSB_DLOAD)? Are you running Windows/Mac/Linux?
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
mikejr83 said:
If your phone turns on you can get to Odin. Your best bet is making a usb jig. It's a special usb end that has 300k ohm resistor between two pins of the usb. When plugged in and the phone turns on it puts you directly into download mode. You can Google on how to make one from a usb cable and resistors from Radio Shack or mobiletechvideos.com sells them for $8.
Once in download/Odin mode you can re flash everything to stock.
Sent from my DROIDX using xda app-developers app
Click to expand...
Click to collapse
This is your best bet if nothing else is working. I bought one from China on eBay last year for my GNex. I'm glad I've always got it.
Yea, I ended up having to jig it this morning when I got to the office and had access to my other tools. THAT got it into Download mode and allowed me to flash it back to stock. Bizzare evening for sure.
Thanks for all the help!
For the record...
To get into DOWNLOAD mode you hold home, power, and volume DOWN.
Volume up is for recovery.
Hope that helps.
I've seen the samething
joka10 said:
Since I'm in a similar situation have you tried using odin
Click to expand...
Click to collapse
I've seen the same issue, I was on Senergy and then tried to test CM10, I didn't like it and I went back to Senergy and I flashed it like normal way, however my phone stack on Samsung logo, after 15 minutes pressing all buttons then I was finally able to get recovery, reflashed senegy and it was alright, I Had very less battery, it could be that but not sure..
maybe
Laramie1997 said:
That makes sense and I overlooked that. Dam.
I wonder if there is a fix???
Click to expand...
Click to collapse
yeah that's right
Same problem
I had this same problem for a AT&T gs3 but I think my battery died and when I plug it in it won't charge. How can I fix that charging problem and then the start up problem?
I am so sad as I write this...:crying:
I had TWRP custom recovery and running the ARHD 9.0 rom.
I was tempted to try the other roms so I played around with Omega and ReVolt rom..they worked fine...
Then, when I tried to reflash ARHD 9.0, I could get to TWRP recovery but it just reboots even before any of the buttons appear.
So, I went into download mode and flashed HighOnAndroid custom recovery.
It seem to work fine....so I went ahead and flashed ARHD 9.0....It installed fine and completed successfully.
But when I rebooted the device...sigh...no power, not even the charging animation when I plug it into the charger...
So, if anyone has a solution on what I should do, please do tell me or I am really sad...so so sad...:crying:
Try a different charger, cable and wall outlet. Leave the n8000 there for a while. Hold the power button for a while, then let it go. Listen closely to the speakers for the little samsung sound when it turns on. Idk if the rom you installed has a boot sound tho. Anyways, if you still dont have an answer after that.. I would maybe start to think the power button is dead. Its a last ditch option but plausible i suppose lol.
Beyond that, you might have to think about sell it for parts.
Oh and i remember from my time with the Samsung vibrant that sometimes, even if nothing comes up on the screen, the device might be picked up by Odin after doing the dl mode button combo
Sent from my Nexus 4 using xda app-developers app
younix258 said:
Try a different charger, cable and wall outlet. Leave the n8000 there for a while.
Click to expand...
Click to collapse
I brought a friend's Note and charged using my usb charger/cable...it is working ok.
I would maybe start to think the power button is dead. Its a last ditch option but plausible i suppose lol.
Beyond that, you might have to think about sell it for parts.
Click to expand...
Click to collapse
My Note is about 2 months old and is still under warranty period. As a last resort, I can send it to them.
Oh and i remember from my time with the Samsung vibrant that sometimes, even if nothing comes up on the screen, the device might be picked up by Odin after doing the dl mode button combo
Click to expand...
Click to collapse
I will try and post back here.
Thanks for sharing your thoughts though.
freelancer81 said:
I brought a friend's Note and charged using my usb charger/cable...it is working ok.
My Note is about 2 months old and is still under warranty period. As a last resort, I can send it to them.
As you have root and custom rom then warranty is void .
If Samsung cannot tell that you have root and custom rom is a different matter .
Click to expand...
Click to collapse
Have you tried plugging in to your pc, see if odin recognizes it? If so try flashing stock samsung rom.
Sent from my GT-N8013 using XDA Premium App
rail205 said:
Have you tried plugging in to your pc, see if odin recognizes it? If so try flashing stock samsung rom.
Click to expand...
Click to collapse
I tried it....not detected...
It's very strange...no backlit or sound even when pressing power, power+vol up/vol down combos.
There was no error at all while flashing the ARHD 9.0.....and when I click on the finish and restart/reboot button at the end, boom..it shutdowns and dies on me...
I have googled it but no one has ever come across this kind of problem.
Since it is completely dead, there is a chance that sammy will not know it's rooted and running custom firmware.
Thanks to you and JJEgan for your concerns and suggestions.
As it sounds like a hardware issue, Samsung will likely fix it under warranty. At least that was my experience with Asus on my previous tablet.
Sent from my Vivid 4G using xda app-developers app
Do you know.if your battery was almost dead when flashing that last. Rom? I've heard that can brick ur device if it dies in flashing process. (Even tho you said flash completed) but who knows?
trevor7428 said:
Do you know.if your battery was almost dead when flashing that last. Rom? I've heard that can brick ur device if it dies in flashing process. (Even tho you said flash completed) but who knows?
Click to expand...
Click to collapse
I am not very sure about the exact battery percentage but yeah, it was low...somewhere about 10%~30%.
So, does that mean there is no way to revive it?
:crying:
freelancer81 said:
I am not very sure about the exact battery percentage but yeah, it was low...somewhere about 10%~30%.
So, does that mean there is no way to revive it?
:crying:
Click to expand...
Click to collapse
Unfortunately not without a new motherboard it seems like. If the is no sign of life, no recovery, no download mode and can't flash via oden or kies on computer with proper drivers installed. Then it sounds like a hard brick. Not recoverable unless new motherboard or JTAG. :/
Sorry man. But in future never flash if less than 30% battory. I've heard some pple say not below 50%
I don't know if your 10.1 died while flashing, but if so it could hard brick
50% is the suggested level of battery because flashing actually uses a large amount of battery. Also the tablets seem to power down things at 10%power.
Could be it shut off if the power dropped below 10%. This is why we suggest to not flash below 50%...
trevor7428 said:
Unfortunately not without a new motherboard it seems like. If the is no sign of life, no recovery, no download mode and can't flash via oden or kies on computer with proper drivers installed. Then it sounds like a hard brick. Not recoverable unless new motherboard or JTAG. :/
Sorry man. But in future never flash if less than 30% battory. I've heard some pple say not below 50%
I don't know if your 10.1 died while flashing, but if so it could hard brick
Click to expand...
Click to collapse
ultramag69 said:
50% is the suggested level of battery because flashing actually uses a large amount of battery. Also the tablets seem to power down things at 10%power.
Could be it shut off if the power dropped below 10%. This is why we suggest to not flash below 50%...
Click to expand...
Click to collapse
so sad....lesson learnt too late....the hard way :crying:
But I guess I have learnt one more way of hardbricking a device.
dude, seems like maybe a problem with your "main board"... i had the same issue at my galaxy tab 2, and i sent it to the shop ( because its passed warranty period already)...