Database Info

[ROM][CDMA][22/11/2011] MIUI-BravoC-1.11.18-2.3.7-data2EXT-CHS&ENG-2.6.38.8

英文不好，哪位大大帮翻译下，谢谢！
此ROM为G7 CDMA版本ROM，英文代号为：bravoc
此ROM开启了DATA2EXT分区，SD卡必须分区，建议EXT4分区，下面有详细教程。
操作步骤：
第一：刷支持分EXT4分区的RECOVERY,地址在这里
第二：将SD卡内的资料备份到电脑上，因为对SD卡分区会造成SD卡上资料丢失。备份后安装到手机上，手机进RECOVERY模式，选择菜单
ADVANCED （高级）
---PARTITION SD CARD（SD卡分区）
--remove all partitions and start from scratch(重新分配所有分区)---
1024（SD-EXT1分区分1024M）---
341（SD-EXT2分区分341M）----
256（SWAP分区分256M）----
YES（确认）----
EXT4（将分区格式化为EXT4格式）
点下PRINT PARTITION INFO(查看分区信息)
2011-11-17 22:30 上传下载附件 (109.91 KB)
我们就可以看到屏幕上打出了分区表了：
分区 文件格式 大小 剩余
SD-EXT EXT4 1024M XXXM
SD-EXT2 EXT4 341M XXXM
SDCARD FAT32 XXM XXXM
SWAP SWAP 257M -
至此，我们已将SD卡分为 FAT32+1GEXT1+341EXT2+256SWAP 四分区了。
再加个刷ROM部分吧：
第三：下载MIUI ROM，将下载的ZIP格式ROM放入手机SD卡中，进RECOVERY模式，
WIPE FORMAT 清除数据&格式化 ----
FORMAT ALL PARTITIONS (EXCEPT SDCARD)（格式化除SD卡外的所有分区）
为了防止清除不干净，我们可以再点下
WIPE data/factory reset 及 wipe cache (清除用户数据及系统缓存之类的)
按返回键返回进入INSTALL FROM SDCARD(从SD卡上选择安装ROM)
----CHOOSE ZIP FROM SDCARD (从SD卡上选择ZIP格式的ROM)
-----XXXX.ZIP（就是你下载的ROM名）
OK，现在可以开刷了，刷完后按返回键返回，拨电池，（很多网友卡在第一屏，是返回后按REBOOT NEW菜单所致，原因未知，应该是RECOVER重启引导性错误，直接拨出电池，再安装上，按电源开机，如果步骤没错，你现在可以正常开机了。不过有时测试时，点REBOOT NEW可以进系统，我也郁闷了。）
The following translation from the anti-GOOGLE
English is not good, which greatly help translate, thank you!
This ROM version for the G7 CDMA ROM, English, code-named: bravoc
This opens the DATA2EXT partition ROM, SD card must be partitioned, it is recommended EXT4 partition, following a detailed tutorial.
Steps:
First: the brush support points EXT4 partition RECOVERY, address here
Second: the SD card to back up data to a computer, because the SD card partition on the SD card will result in data loss. After the installation of a backup to the phone, cell phone into RECOVERY mode, select Menu
ADVANCED (Advanced)
--- PARTITION SD CARD (SD card partition)
- Remove all partitions and start from scratch (re-allocation of all partitions) ---
1024 (SD-EXT1 partition points 1024M) ---
341 (SD-EXT2 partition points 341M )----
256 (SWAP partition points 256M )----
YES (confirmed )----
EXT4 (formatted as EXT4 partition format)
Point under the PRINT PARTITION INFO (view partition information)
2011-11-17 22:30 upload and download attachment (109.91 KB)
We can see the screen shot on the partition table:
The size of the remaining partition file format
SD-EXT EXT4 1024M XXXM
SD-EXT2 EXT4 341M XXXM
SDCARD FAT32 XXM XXXM
SWAP SWAP 257M -
So far, we have the SD card into FAT32 1GEXT1 341EXT2 256SWAP four partitions.
Coupled with a brush ROM part of it:
Third: Download MIUI ROM, the ROM download ZIP format SD card into the phone, into the RECOVERY mode,
WIPE FORMAT Clear data & formatting ----
FORMAT ALL PARTITIONS (EXCEPT SDCARD) (in addition to the SD card format all partitions outside)
In order to prevent removal is not clean, we can then point the next
WIPE data / factory reset and wipe cache (Clear user data and system cache and the like)
Press the Back key to return to enter the INSTALL FROM SDCARD (choose to install from the SD card ROM)
---- CHOOSE ZIP FROM SDCARD (from the SD card, select the ZIP format ROM)
----- XXXX. ZIP (that you download the ROM name)
OK, now you can open the brush, and brushing and press the return key to return, call the battery, (a lot of friends stuck in the first screen, the menu returns caused by REBOOT NEW unknown reason, it should be restarted leading RECOVER error, direct set aside the battery, install, and press the power boot, if the right steps, you can now boot up normally, but sometimes the test, the point REBOOT NEW can enter the system, I was depressed.)

这里是下载地址：
新核心2.3.7_2.6.38.8 （NEW Kernel2.3.7_2.6.38.8）
http://115.com/file/e6dnh99d#
XZD-MIUI-20111119-2.6.38.8-BRAVOC_1.11.18_signed.zip
CM提取核心：2.6.37.6 (Kernel from CM 2.6.37.6 )
http://115.com/file/aq6iurri#
XZD-MIUI-20111119-CN1118-BRAVOC_1.11.18_signed.zip
已ROOT
DATA Free 0.95GB
- UC Browser:
- Superuser Permissions
- Busybox
- Rooted
- Zipaligned
- Deodexed
Kernel:2.6.38.8
Will work on
2 Partitions: fat32+ext4, fat32=remaining, ext4=1000MB;
3 Partitions: fat32+ext4+ext4, fat32=remaining, ext4=1000MB, ext4=300MB;
4 Partitions: fat32+ext4+ext4+linux-swap, fat32=remaining, ext4=1000MB, ext4=300MB, linux-swap=100-200MB;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

适合CDMA版本的RECOVERY模式在这里可以下载到：
4extrecovery_v2.2.7_rc5
http://115.com/file/aq69kepl#
PB99IMG.zip
刷RECOVERY方法：
刷机方法：
ZIP文件更新方法:将下载到的PB99IMG.zip 放入格式为FAT32的SD卡中，
将卡放入G7 CDMA手机，
手机关机。然后按住音量下键（按着不松）+关机键（红色电话那个按钮按着不松）
手机进入HBOOT模式，如振动几次没进入则拨电池重新来。
此时手机会自动识别卡上的PB99IMG.zip 文件，出现YES NO时点轨迹球确认（即选YES）
更新完将再次出现YES NO，轨迹球确认重启。更新至此结束。
RECOVERY mode for CDMA versions can be downloaded here:
Brush RECOVERY method:
Brush Method:
ZIP file update method: will be downloaded to the PB99IMG.zip into the SD card to FAT32 format, the
Place the card G7 CDMA mobile phones,
Phone off. Then press and hold the volume down button (according to not loose) + off button (red phone by pressing the button is not loose)
Phone into HBOOT mode, such as the vibration did not enter the dial several times to the battery again.
At this point the phone will automatically recognize the file on the card PB99IMG.zip appears YES NO point trackball to confirm (that is, choose YES)
After the update again YES NO, the trackball to confirm reboot. Updates to this end.

Dafuq? I know I'm late.......
Sent from my HTC Desire using xda app-developers app

panpjp said:
Dafuq? I know I'm late.......
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
I think he is mistaken as his procedure for the ROM flash seems to be for the HTC G7 (bravo c). He was talking mostly about flashing this ROM and partitioning SD cards and all that stuff
Sent from my GT-I9000 using Tapatalk 2

XDA is an international site, but please no other languages! (Chinese is the most confusing ever, no offense) And there is already another miuiv4 thread so mod pls close.
Sent from my GT-P7300 using xda app-developers app

panpjp said:
XDA is an international site, but please no other languages! (Chinese is the most confusing ever, no offense) And there is already another miuiv4 thread so mod pls close.
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
so what is another miuiv4? let the man organize his posts, maybe he remove chinese stufs, rom could be useful for others.
cheers

http://forum.xda-developers.com/showthread.php?t=1627448
I thought this thread is miui4, but it is gb anyway there are bunches of old miui out there, so why this? Mod should close, for it is a duplicate and discontinued.
Sent from my HTC Desire using xda app-developers app

i am a chinese and i know what he said.
this rom is a very old miui rom, it was built in 2011，and it based on android 2.3.x , also , this guy said that he don't know english, so he use chinese instead.
Sent from my HTC Desire using xda app-developers app
---------- Post added at 08:28 PM ---------- Previous post was at 08:23 PM ----------
also , this rom just for bravo CDMA phones , not for GSM
Sent from my HTC Desire using xda app-developers app

D2EXT+ for CM9 instead of INT2EXT+

D2EXT+ INSTALLATION TUTORIAL
IF YOU ALREADY HAVE S2E, LINK2SD OR SIMILAR, YOU MUST REPARTITION SD CARD AND FACTORY WIPE
D2EXT+ Supports 1gb+ and same as INT2EXT+.
PREPARATIONS
Download the latest build of CyanogenMod 9.
Download the latest version of CronMod D2EXT+ (i've attached the zip)
Open CyanogenMod 9 zip.
Navigate to /system/etc/init.d
Open D2EXT+ zip.
Navigate to /system/etc/init.d
Add the file called 40d2ext in the /system/etc/init.d directory in CM9 zip.
INSTALLATION
Go to recovery, do factory reset and advanced > partition sd card.
Select 2048M for ext(as much as u want) and 0M for swap.
Wait until it says Done and goes to menu.
Go to Mounts and Storage.
Select USB storage and connect your phone to your computer.
Copy your modified CM9 zip file to the root of your sd.
Unmount.
Reflash ROM.
Reboot.
thats it your internal memory is 2gb
proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After reboot, reboot into recovery and flash gapps.zip normally.
Then go to Applications and enjoy your new, extended internal storage.
PLEASE HIT THANKS IF I HELPED

int2ext+ supperts 1 GB+ too. I just forgot to define it.

oops sorry
oh.. than sorry i will edit my thread but anyway d2ext+ is also best right?

does this support stock explorer rom??

Thanks
Works great! thanks a lot. But one small problem...The Dalvik Cache's size has become 150mb, the size of the internal memory (data_internal) on HTC Explorer and I barely have around 40 apps. Its not letting me install more apps and the device is hanging every half hour or so, forcing me to reboot. this has become very problematic. Rest all is working fine. Please advice.

wow seems good!...
im currently using link2sd.. ive seen so many scripts out there. which one do you think is the best?
ungaze script? int2sd d2sd bla bla??
Sent from my HTC Explorer A310e using xda app-developers app

does this script have anything to do about class of SD card coz I am using 8gb class 2 and still I am wondering how come any script increases internal memory?

nik007rock said:
does this script have anything to do about class of SD card coz I am using 8gb class 2 and still I am wondering how come any script increases internal memory?
Click to expand...
Click to collapse
no it works just fine mine is 8gb class 4 and it wont increase internel memory these scripts mount sd-ext and make the phone think that sd-ext is the internal memory, installing any app will go into sd-ext (internal memory)
:good:

Xzan23 said:
wow seems good!...
im currently using link2sd.. ive seen so many scripts out there. which one do you think is the best?
ungaze script? int2sd d2sd bla bla??
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
INT2EXT+ :good:
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
-First universal INT2EXT method
and
D2EXT+ :good:
-Mounts /data to /data_internal and /sd-ext to /data
-Leaves /data/dalvik-cache on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot

sviswas7 said:
INT2EXT+ :good:
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
-First universal INT2EXT method
and
D2EXT+ :good:
-Mounts /data to /data_internal and /sd-ext to /data
-Leaves /data/dalvik-cache on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
Click to expand...
Click to collapse
hey thanks... 1 more ques...would this be better or the ungaze script?
Sent from my HTC Explorer A310e using xda app-developers app

Why doesn't clockwork recovery 6.0.x.x have the sd partitioning capability?

Umm can't I make it working without repartitioning my SD card..?

Rishik999 said:
Umm can't I make it working without repartitioning my SD card..?
Click to expand...
Click to collapse
nop...the extra memory wont pop out of mid air u know
Sent from my HTC Explorer A310e using xda app-developers app

Xzan23 said:
hey thanks... 1 more ques...would this be better or the ungaze script?
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
ungaze is better sometimes it did't work for me so i used this,this will work definitly if u follow my tut.. correctly

Rishik999 said:
Umm can't I make it working without repartitioning my SD card..?
Click to expand...
Click to collapse
no

hrkh83 said:
Why doesn't clockwork recovery 6.0.x.x have the sd partitioning capability?
Click to expand...
Click to collapse
its new and it has a bug (which will brick ur phone) and it needs to be fixed and need to be improved a lot

Help..
"Add the file called 40d2ext in the /system/etc/init.d directory in CM9 zip."
Am not able to add this..
any suggestions??
Edit:-
Got the procedure.
Weee..
Thnx for this..

u need to add it using winrar...uh...and 40d2ext is located in cronmod_d2ext+.zip

I followed the tutorial to word...factory reset...clean instal if the modified cm9.zip....my card is partitioned 512 mb...and nothing...memory still 150 mb....
I'm really starting to get frustrated...yesterday I tried ungaze script...it didn't work...today I tried this...it didn't work...
WHAT AM I MISSING???!
Edit:: I just saw it supports 1gb+....how stupid of me :/
I guess that was the problem with ungaze too

Xzan23 said:
I followed the tutorial to word...factory reset...clean instal if the modified cm9.zip....my card is partitioned 512 mb...and nothing...memory still 150 mb....
I'm really starting to get frustrated...yesterday I tried ungaze script...it didn't work...today I tried this...it didn't work...
WHAT AM I MISSING???!
Edit:: I just saw it supports 1gb+....how stupid of me :/
I guess that was the problem with ungaze too
Click to expand...
Click to collapse
hey try int2ext+, d2ext and int2ext r working 100% sure
did u copy 40d2ext to system\ext\int.d\ folder in cm9.zip?,did u reboot after starting for first time or did u just install both cm9.zip and gapps.zip at the same time

mount cache and sd partition

hey guys i have ics 4.0.4 and i want to install htc sense4.0.3...........So the instructions are in very brief format
i need full info about how to mount cache and sd ext partition ....................and i have my phone rooted and unlocked.
and i also want to know have partitioned my sd card before from card reader and linked with link2sd as fat32 (512mb, primary) partition ...........and after installing another custom rom (ics 4.0) the partition gone its not showing in the pc or my phone i only have now 1.32 gb sd card.......so this is why i want to know the exact prosedure for partitioning my new 8 gig sd card.......

rajat836 said:
hey guys i have ics 4.0.4 and i want to install htc sense4.0.3...........So the instructions are in very brief format
i need full info about how to mount cache and sd ext partition ....................and i have my phone rooted and unlocked.
and i also want to know have partitioned my sd card before from card reader and linked with link2sd as fat32 (512mb, primary) partition ...........and after installing another custom rom (ics 4.0) the partition gone its not showing in the pc or my phone i only have now 1.32 gb sd card.......so this is why i want to know the exact prosedure for partitioning my new 8 gig sd card.......
Click to expand...
Click to collapse
At first u need to partition ua sd card before flash ics4.04 HTC rom. At it should be at least 512mb. And get there mini partition tool. And get the ext2 partition. It's best. U can get the tutorial in the XDA it self just search. If u can figure it out quote here.
After partition put ics rom(zip file) in memory card(not in any folder). Now go to recovery wipe data/factory rest>wipe partition>wipe dalvik>wipe system(compulsory)>now go to install zip from sd card then flash the new rom>reboot
And wait don't panic it ll take some time. After that don't unlock the screen wait for 2min then install mount2sd(u can use link2sd also but mount2sd is best). Then go to enumerator type su then enable every thing. N enjoy..
Hit thanks if I helped
Typing in swift key3 from tiny explorer with ICS

if am not wrong sense 4 Rom has no m2sd ya don't need link2sd also its auto if ya can't understand partition wizard do this
go recovery > advance )partition) choose any u like 1024 I choose then partition it it will erase all data so back up sd card then go and mout USB after con. to pc copy Rom to sd and do fresh install acc to procedure
guys correct me if went wrong

How do I move usr folder from system partion to sd-ext
Sent from my HTC Explorer using xda premium

answer
mohan padmanabha said:
How do I move usr folder from system partion to sd-ext
Sent from my HTC Explorer using xda premium
Click to expand...
Click to collapse
just download es file explorer from play store.........or file manager ,,,,and just long press on the folder and option will popup and then move your folder......

^epic facepam

rajat836 said:
just download es file explorer from play store.........or file manager ,,,,and just long press on the folder and option will popup and then move your folder......
Click to expand...
Click to collapse
I don't think its that simple dude. You need a root explorer (ES File Explorer also has that property), gotta rename the folder and gotta symlink it after moving it to sd-ext.
It's better you change it in the downloaded zip and flash it. Or simply download Sensebuild4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can u tell me how to create symlink . I'm using the modded version of sense 4 and I like so
Sent from my HTC Explorer using xda premium

Ya I got it transfered to sd-ext by using symbolic link ..
Sent from my HTC Explorer using xda premium

NO multitasking
Hai guys pls some one help me i have installed FlyROM (Sense 4.0) (hTc Explorer) but I don't get multitasking option.....
pls some one help me........

[MOD][25-06-2013] Super APP2SD init.d script. Increase your app storage space on SGS4

I have found a solution for your low memory space problems on a Galaxy S4 GT-I9505 16GB
Courtesy of TweakerL, modified for the S4 with his permission.
Original script http://forum.xda-developers.com/showthread.php?t=1888986
Features:
Install apps and data directly to the external SD
[*]Moves existing apps and data to the external SD
[*]Mounts the /data folders to the external SD on boot
[*]Free your internal SD memory for use
[*]Uses a second EXT4 partition on your MicroSD
[*]Seamless intergration
NOTE: This now works on stock ROM's and stock kernel's.
I have tested this script successfully on stock MDF, ME3, MEA, MF4, MF8 and Omega ROM's. Works with ktoonsez 6/23/2013 and Abyss 1.1 kernels. Adam 1.4 kernel hangs on reboot, but can be flashed after the script has installed successfully. This works on faux kernel even though it does not have init.d support.
Requirements:
Experience with Android modding, although not strictly required
Galaxy S4 GT-I9505
ROOT Access
Fuse mod which will be installed
MicroSD, preferably a blank 64GB Class 10
Busybox Installer from Playstore https://play.google.com/store/apps/details?id=com.jrummy.busybox.installer
Terminal Emulator from Playstore https://play.google.com/store/apps/details?id=jackpal.androidterm
Any root explorer from Playstore, I use ES https://play.google.com/store/apps/details?id=com.estrongs.android.pop
PerfMon from Playstore, free from here http://forum.xda-developers.com/showthread.php?t=1933284
Any zip extractor app from Playstore, ES has one built-in
Partition Table from Playstore https://play.google.com/store/apps/details?id=com.cls.partition
A computer to create EXT4 partition on the MicroSD
MiniTool Partition Wizard Home Edition v7.8 free from here http://www.partitionwizard.com/free-partition-manager.html
Pre-install preparations:
Do a Nandroid backup of your current ROM, if you have a custom recovery
Although not required with this script, backup your apps with Titanium or another app.
Backup your MicroSD. This is important if you have files on it that you want to keep.
Using MiniTool Partition Wizard, format your whole MicroSD to FAT32
Then resize the first partition to your requirements. e.g. 30GB and 30GB for the second
Create the second partition and select Primary, EXT4 and 4KB cluster size
In my example below I have a 40GB EXT4 partition for my apps and games
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
While your waiting for the MicroSD to finish formatting, install the apps listed above
Install busybox v1.20.2 to /system/xbin. This is a important step.
Once thats done put your MicroSD back into your S4
Installation instructions:
Extract the A2SD zip to /sdcard
Run the Terminal Emulator
Code:
Type [B]su[/B] then press enter
Type [B]cd /sdcard/a2sd[/B] then press enter
Type [B]sh ./install-a2sd[/B] then press enter
It should install successfully, press enter to reboot
Once rebooted, run your root explorer
Navigate to /sdcard/Tweaked.Scripts/A2SD
If there is a DEVICE_IS_READY file you can reboot again
Upon reboot, run PerfMon, select Disk I/O
You will see the data moving between internal to external SD
Run root explorer and navigate to /sdcard/Tweaked.Scripts/A2SD
Wait till all the data has been moved. NOTE: It can take a while if you have a full sdcard
IMPORTANT: The Read and Write columns on DISK I/O must all be '0' before you reboot
Refresh /sdcard/Tweaked.Scripts/A2SD in root explorer
If there is a DEVICE_IS_READY file you can reboot again
Once rebooted, your apps and data now reside in your external SD
It does look like nothing has happened but everything is now running from external SD
If you find the 'SD-EXT' folder in '/Android/data' ; '/Android/obb' ; '/data/app' ; '/data/data' then these folders are now mounted on your external EXT4 partition instead of the internal sdcard.
Now reboot again for the fourth and final time
Once rebooted all apps and app data will be deleted from the internal sdcard except your user files
Open the Application Manager in More Settings
You can see the free space increasing before your very eyes
As you can see your apps are still installed with their data
You can see what was deleted in /sdcard/Tweaked.Scripts
To find out how much space is being used on your MicroSD's second partition
Run the Partition Table app and look for /storage/sd-ext/data
If you subtract the available from the total space in the screenshot below, it is less than the applications and other data added together.
NOTE: At the moment, there is no reversal script. Restore a nandroid backup to reverse. This will not restore the Android/data though. Remember to put back your files on your MicroSD that you backed up
WARNINGS:
DO NOT DELETE '/sdcard/Tweaked.Scripts' OR IT WILL STOP THE SCRIPTS WORKING
DO NOT REMOVE MICROSD CARD WHILE THE PHONE IS ON. ALWAYS POWER OFF FIRST SO TO NOT CORRUPT DATA.
DO NOT REBOOT THE PHONE WITHOUT THE MICROSD CARD, YOUR PHONE WILL BE IN A STOCK STATE AGAIN IF YOU DO AND FORCE CLOSURES MIGHT HAPPEN
Changelog:
v1.0 Released 16-06-2013
v1.1 25-06-2013
Runs on stock ROM and kernels
Flashing custom or stock kernel will not affect script
Rename install-recovery.sh in Omega ROM as not needed
Add a init.d test script

This is awesome!, But will it work on i9500?

It will not install on any S4 but I9505 for now. I would need some system info to make it work for other variants. Any volunteers to test script's?
Sent from my GT-I9505 using xda app-developers app

It would'n be possible to handle this with a dedicated application ?

I am seeing if it can be installed from a flashable zip. As for making a App, I don't know. Might look into it later maybe. No promises.
Sent from my GT-I9505 using xda app-developers app

No offense but why would you go to all of this bother when you can just use Folder Mount free app?
Sent from my GT-I9505 using Tapatalk 2

No offense taken. Why am I going to so much bother? Well this is XDA after all and because I wanted a seamless and maintenance free solution. I used to use directory bind and it became very tedious to move data over every time I installed a app or game with large data.
This script once installed allows you to install and run apps and games directly from the Playstore on your micro sd card including the data and obb files. Install it once and forget about it. It treats the external memory as though it is the internal, but not totally swapped. It's safer than that method.
As for Folder Mount it's the same as directory bind. Too high maintenance for me. It is also limited to 3 mounts I believe unless you pay. It's great if you don't have the knowledge to use a script but for me if I can do it a better way I will always follow that path.
Sent from my GT-I9505 using xda app-developers app

Deus_ex11 -
the apps will be installed in fat32 or ext4?

Yes you are required to make a second partition on your Microsd card with the EXT4 file system. It will be faster for your apps. Remember to backup the card before you partition it.
Sent from my GT-I9505 using xda app-developers app

Hi guys wanna to know if i install this after clean rom install are all apps installed after that will go to sdcard ???

Yes, apps and app data will be installed straight to your external memory
Sent from my GT-I9505 using xda app-developers app

Deus_ex11 said:
Yes, apps and app data will be installed straight to your external memory
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Great its really good work man

Just a heads up. DO NOT use ADAM kernel to install this script until advised. It hangs on reboot. You can use Adam kernel after you have installed the script successfully. Also Faux kernel doesn't have init.d support.
Sent from my GT-I9505 using xda app-developers app

Deus_ex11 said:
Just a heads up. DO NOT use ADAM kernel to install this script until advised. It hangs on reboot. You can use Adam kernel after you have installed the script successfully. Also Faux kernel doesn't have init.d support.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Well i'm using Omega v5.0 MEA ROM with init support dosnt need a kernel to support it its this ok ?

I have not tried that Rom. It's a Samsung based Rom. If it has init.d support without a custom kernel then it shouldn't be a problem but you will need to remove the # from the sysinit file on this line '/system/bin/logwrapper busybox run-parts /system/etc/init.d'
Sent from my GT-I9505 using xda app-developers app

Deus_ex11 said:
I have not tried that Rom. It's a Samsung based Rom. If it has init.d support without a custom kernel then it shouldn't be a problem but you will need to remove the # from the sysinit file.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
ok i'm new to android world only have i9505 for a week now can u tell me where i can find this file thanks

It's in the A2SD zip. Before you run the A2SD script. You can test if you have init.d support first by adding the attached test script to /etc/init.d and rebooting.
If you have a 'init.d.log' file in /sdcard then your init.d is working.
Forgot to add, extract the 99testinit.zip to /etc/init.d
Sent from my GT-I9505 using xda app-developers app

Deus_ex11 said:
It's in the A2SD zip. Before you run the A2SD script. You can test if you have init.d support first by adding the attached test script to /etc/init.d and rebooting.
If you have a 'init.d.log' file in /sdcard then your init.d is working.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Ok but i i use kernel with init support i dont have to do that right

No
Sent from my GT-I9505 using xda app-developers app

Deus_ex11 said:
No
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Ok i have a problem i installed Pre-rooted XXUBMEA and CWM 6.0.3.2-6 i put the omega zip
on sd card but when i go to install zip from sd card now the recovery can see my sd card
and i have to make hard reboot

[SOLVED - PLEASE LOCK!] CWM cannot find files in SD Card - Miro

Hi... I wanted to flash a custom ROM for Miro but the problem is everytime I choose (install zip from SD card), CWM says that there are no files found. Please help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

pROAddicts said:
Hi... I wanted to flash a custom ROM for Miro but the problem is everytime I choose (install zip from SD card), CWM says that there are no files found. Please help me.
Click to expand...
Click to collapse
No external sd option??????????

pROAddicts said:
CWM says that there are no files found.
Click to expand...
Click to collapse
Did you try mounting SD Card before flashing?
Regards.

Droid.Riz said:
No external sd option??????????
Click to expand...
Click to collapse
The one highlighted with white, the top most, is the "install from SD" option... And everytime i selected it, it says "No files found" as you can see at the bottom.

Naney said:
Did you try mounting SD Card before flashing?
Regards.
Click to expand...
Click to collapse
Yeah... I unmounted it then mounted it again... Still the same...

I see why, You are using CWM 6.0.1.2, if you wanna see your files you have to put them on the ext-card ( external sd card ).

Mystogan said:
I see why, You are using CWM 6.0.1.2, if you wanna see your files you have to put them on the ext-card ( external sd card ).
Click to expand...
Click to collapse
i already did... in fact I have files in ext card and sd card... 6.0.1.2? does it have any issues? can you recommend a CWM version good for MIRO? Or TWRP instead??

pROAddicts said:
i already did... in fact I have files in ext card and sd card... 6.0.1.2? does it have any issues? can you recommend a CWM version good for MIRO? Or TWRP instead??
Click to expand...
Click to collapse
Have you recently formatted your SD cards for any reason at all?
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
---------- Post added at 10:36 PM ---------- Previous post was at 10:15 PM ----------
pROAddicts said:
i already did... in fact I have files in ext card and sd card... 6.0.1.2? does it have any issues? can you recommend a CWM version good for MIRO? Or TWRP instead??
Click to expand...
Click to collapse
I only ask because any version is as good as the other... It only matters that your version of Android corresponds to the version of your recovery.
Any version recovery SHOULD be able to read your storage.
If you like you can try this.
Enable usb debugging and connect the device to your computer (hope you have one lol) Proceed to transfer all of your personal files from internal/external SD to your computer.
Next step is crucial. In order for recovery to read storage, both internal and external SD cards must be formatted in fat32. This is what you need to do. It can only be done through windows. Quickly Google/XDA search "format SD cards to fat32". Follow instructions exactly as written. After completion transfer all files back to your device, boot into recovery and your files should be present.
This, my friend, is the best I've got to help you. If you choose to try, I will claim no responsibility should any damages occur
Best of luck to you, sir.
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app

Skywalker.00 said:
Have you recently formatted your SD cards for any reason at all?
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
---------- Post added at 10:36 PM ---------- Previous post was at 10:15 PM ----------
I only ask because any version is as good as the other... It only matters that your version of Android corresponds to the version of your recovery.
Any version recovery SHOULD be able to read your storage.
If you like you can try this.
Enable usb debugging and connect the device to your computer (hope you have one lol) Proceed to transfer all of your personal files from internal/external SD to your computer.
Next step is crucial. In order for recovery to read storage, both internal and external SD cards must be formatted in fat32. This is what you need to do. It can only be done through windows. Quickly Google/XDA search "format SD cards to fat32". Follow instructions exactly as written. After completion transfer all files back to your device, boot into recovery and your files should be present.
This, my friend, is the best I've got to help you. If you choose to try, I will claim no responsibility should any damages occur
Best of luck to you, sir.
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks for helping out... i tried but to NO avail... consequently, I used TWRP for MIRO, then iwas able to read both SD card and Internal memory.... Currently installing Jelly Bean Mini Project Release 5 I'' update this thread or close this if everything is going fine!

pROAddicts said:
thanks for helping out... i tried but to NO avail... consequently, I used TWRP for MIRO, then iwas able to read both SD card and Internal memory.... Currently installing Jelly Bean Mini Project Release 5 I'' update this thread or close this if everything is going fine!
Click to expand...
Click to collapse
I'm glad you got it sorted
Have fun!!
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app

I have used CWM 6.0.2.8 instead... Now External SD is read... SOLVED!