I currently have an N8010 running XXALGC. Someone on here pointed out there is a new German firmware on Sammobile (4.0.4 before anyone gets excited), I am hoping this will fix some of wireless issues. I am downloading the zip as we speak N8010XXALI3_N8010OXAALI3_DBT.zip
Once it has downloaded do I just flash it through CWM or is there another process for firmware from Sammobile?
Never mind found it
Related
Hi,
I am searching for latest O2 branded firmware but as Multiupload and other hosting sites are down now. Can someone please help me to get this latest firmware. Kies in my computer also shows me a new firmware but when I update with Kies, it does all the process of downloading and installing but after the 100% completion it reaches back to the same state showing a newer version is available.
I will be grateful for any help either by giving me any link to download the latest branded firmware of o2 or to help solving Kies problem.
p.s. I have tried samfirmware.com and also Check Fus but those firmwares are corrupted and they stuck in the middle of installation.
This is a version RC1. In March would officially
http://www.sammobile.com/
Thank you Seryeo but as I mentioned in my previous post that the firmware which is available at SamMobile is perhaps corrupted as when I run it at Odin it stucks in the middle and then I have to flash my mobile again with the older firmware otherwise my mobile stops working.
Hi,
I am searching for latest O2 branded firmware but as Multiupload and other hosting sites are down now. How can I get the latest firmware. Kies in my computer also shows me a new firmware but when I update with Kies, it does all the process of downloading and installing but after the 100% completion it reaches back to the same state showing a newer version is available.
I will be grateful for any help either by giving me any link to download the latest branded firmware of o2 or to help solving Kies problem.
p.s. I have tried samfirmware.com and also CheckFus but those firmwares are corrupted and they stuck in the middle of installation.
Thanks
Looking for the stock gear 2 Odin file. Currently running tizen mod 3.0 but I am having Bluetooth connection issues and was interested in unrooting my gear 2.
Went to sammobile website and found firmware for UK version. No USA version?
Although she have said it's the same, when I do the firmware check, Sammobile website says firmware not found and does not allow me to download the file.
Can some one post or send me a link to the stock gear 2 file so I can flash via Odin.
Thanks in advance
RJV3 said:
Looking for the stock gear 2 Odin file. Currently running tizen mod 3.0 but I am having Bluetooth connection issues and was interested in unrooting my gear 2.
Went to sammobile website and found firmware for UK version. No USA version?
Although she have said it's the same, when I do the firmware check, Sammobile website says firmware not found and does not allow me to download the file.
Can some one post or send me a link to the stock gear 2 file so I can flash via Odin.
Thanks in advance
Click to expand...
Click to collapse
I'm in the same boat. I found the UK version on samsung-updates, but still want to know why no US version. Is it because there just simply isn't one?
I went through this same situation with my Gear 1. No U.S. updates have been available. The UK one is perfectly fine to use since it's the English language.
Here's my mediafire link of the UK version
http://www.mediafire.com/download/by35hfo8obrzivt/R380XXU0BNE5_R380OXA0BNE5_BTU.zip
440bro said:
I went through this same situation with my Gear 1. No U.S. updates have been available. The UK one is perfectly fine to use since it's the English language.
Here's my mediafire link of the UK version
http://www.mediafire.com/download/by35hfo8obrzivt/R380XXU0BNE5_R380OXA0BNE5_BTU.zip
Click to expand...
Click to collapse
Have you still gotten the "tampered device" message after using the UK firmware when checking for an update?
kouichi74 said:
Have you still gotten the "tampered device" message after using the UK firmware when checking for an update?
Click to expand...
Click to collapse
Flashed back to stock from tizen 3.0 mod and I don't get that error messages when doing a check for update. I did notice when I'm download mode my flash counter is tripped and now status says Custom. Is there a way to rest the flash counter?
RJV3 said:
Flashed back to stock from tizen 3.0 mod and I don't get that error messages when doing a check for update. I did notice when I'm download mode my flash counter is tripped and now status says Custom. Is there a way to rest the flash counter?
Click to expand...
Click to collapse
Yeah. I tried the UK one and when I tried checking for an update on my S5 it still told me that I was unable to because it was modified. Was that how you flashed back to stock? Or did you use another method?
We used the same method the same firmware versions (UK). The only difference is that I'm running an S4 and your running an S5. Also, my S4 is still with the mdk bootloader so I'm not using safestrap. I'm on TWRP. Not sure if that has anything to do with the error messages your seeing.
Sent from my Venue 11 Pro 7130 MS using Tapatalk
There is a new Loly firmware update for Singapore available for download in Sammobile. http://www.sammobile.com/firmwares/download/46491/N915GXXU1BOD2_N915GOLB1BOD2_MM1/
Has anyone tried to flash successfully the firmware??? I have tried updating several times but failed It claimed that the system ext4 image file too large or something??? Flashed back the latest Aussie firmware and all is good. I am not sure what I have done wrong here? could Singapore N915G different than the Aussie that would explain why I cant flash on my Aussie N915G??
kuailan said:
There is a new Loly firmware update for Singapore available for download in Sammobile. http://www.sammobile.com/firmwares/download/46491/N915GXXU1BOD2_N915GOLB1BOD2_MM1/
Has anyone tried to flash successfully the firmware??? I have tried updating several times but failed It claimed that the system ext4 image file too large or something??? Flashed back the latest Aussie firmware and all is good. I am not sure what I have done wrong here? could Singapore N915G different than the Aussie that would explain why I cant flash on my Aussie N915G??
Click to expand...
Click to collapse
I've found the Partition is different for Aussie carrier devices. You might need a dfferent PIT file...
Just be advised though, you may not be able to go Aussie carrier roms easily and remember, flashing a PIT file can be dangerous....
ultramag69 said:
I've found the Partition is different for Aussie carrier devices. You might need a dfferent PIT file...
Just be advised though, you may not be able to go Aussie carrier roms easily and remember, flashing a PIT file can be dangerous....
Click to expand...
Click to collapse
Nah...dont think will risk it since still the same version. Im just curious to see if there is some new improvement. I guess i will just see what feedback we will get from those spore owners.
Sent from my SM-N915G using XDA Free mobile app
Singapore 915G
Just flash this Rom with Odin and rooted. No issue, no need to re-partition
My mods:
5x5 Tw Launcher works
Modded S6 keyboard works
3Minit battery works
Edit:
No noticeable difference from the B0C2 I've been using
More crapwares from Singtel the provider
Hi did u use the cf for sm-n915G? cos when i use it it say error. just wondering if you have the steps to root it?
ynotial said:
Hi did u use the cf for sm-n915G? cos when i use it it say error. just wondering if you have the steps to root it?
Click to expand...
Click to collapse
Flh TWRP or CWM with ODIN.
Put latest SuperSU on sd card and flash with TWRP/CWM. There, your rooted...
I have a g930f which originally had the TTT (Trinidad/Tobago) firmware. I am in the USA on AT&T. When I download the latest TTT firmware from Sammobile, which files in the .TAR should I flash, and which should I avoid? One of them at least would overwrite my AT&T compatibility I believe, but I'm not sure which one. Thanks for a reminder so I can update, anyone who can help!