Database Info

New Loly update (SINGAPORE) FOR N915G

There is a new Loly firmware update for Singapore available for download in Sammobile. http://www.sammobile.com/firmwares/download/46491/N915GXXU1BOD2_N915GOLB1BOD2_MM1/
Has anyone tried to flash successfully the firmware??? I have tried updating several times but failed It claimed that the system ext4 image file too large or something??? Flashed back the latest Aussie firmware and all is good. I am not sure what I have done wrong here? could Singapore N915G different than the Aussie that would explain why I cant flash on my Aussie N915G??

kuailan said:
There is a new Loly firmware update for Singapore available for download in Sammobile. http://www.sammobile.com/firmwares/download/46491/N915GXXU1BOD2_N915GOLB1BOD2_MM1/
Has anyone tried to flash successfully the firmware??? I have tried updating several times but failed It claimed that the system ext4 image file too large or something??? Flashed back the latest Aussie firmware and all is good. I am not sure what I have done wrong here? could Singapore N915G different than the Aussie that would explain why I cant flash on my Aussie N915G??
Click to expand...
Click to collapse
I've found the Partition is different for Aussie carrier devices. You might need a dfferent PIT file...
Just be advised though, you may not be able to go Aussie carrier roms easily and remember, flashing a PIT file can be dangerous....

ultramag69 said:
I've found the Partition is different for Aussie carrier devices. You might need a dfferent PIT file...
Just be advised though, you may not be able to go Aussie carrier roms easily and remember, flashing a PIT file can be dangerous....
Click to expand...
Click to collapse
Nah...dont think will risk it since still the same version. Im just curious to see if there is some new improvement. I guess i will just see what feedback we will get from those spore owners.
Sent from my SM-N915G using XDA Free mobile app

Singapore 915G
Just flash this Rom with Odin and rooted. No issue, no need to re-partition
My mods:
5x5 Tw Launcher works
Modded S6 keyboard works
3Minit battery works
Edit:
No noticeable difference from the B0C2 I've been using
More crapwares from Singtel the provider

Hi did u use the cf for sm-n915G? cos when i use it it say error. just wondering if you have the steps to root it?

ynotial said:
Hi did u use the cf for sm-n915G? cos when i use it it say error. just wondering if you have the steps to root it?
Click to expand...
Click to collapse
Flh TWRP or CWM with ODIN.
Put latest SuperSU on sd card and flash with TWRP/CWM. There, your rooted...

Flashing stock rom with odin / sw rev. fail

Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?

Try to flash G920FXXU5DQA7 (CSC code:BTU)

chemeleon said:
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Click to expand...
Click to collapse
You could possibly use smartswitch if you have the serial number of the phone which would download the default firmware that the phone came with if odin fails again

Yes i agree, smartswitch could be your best option.

Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?

chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
Yeah looks like this is a bootloader issue, it won't let you install a firmware which contains an older bootloader, only thing I can is to download the latest non branded UK firmware and see if that flashes.

I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release

chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
LollosoSi said:
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
Click to expand...
Click to collapse
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)

forumber2 said:
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait

LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
You could try using samfirm which a windows application which downloads samsung firmwares

LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
As @sofir786 said, you can use SamFirm;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open it, set the settings like this;

sofir786 said:
You could try using samfirm which a windows application which downloads samsung firmwares
Click to expand...
Click to collapse
Wow I didn't know, it works thanks
forumber2 said:
As I said before; Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
I'll try flashing when the download finishes
Edit:
WORKING!
I used last(I think) ITV
File names:
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CSC: CSC_ITV_G920FITV5DQA2_CL10387678_QB12242913_REV02_user_low_ship.tar
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar

Samsung updated their bootloaders to 4XX in September/October so you cant flash back an older one or downgrade,so the only solution you have is to flash the new one which is 5XX released this year.

Flashed the latest UK revision (not the O2 branded one) and it worked

chemeleon said:
Flashed the latest UK revision (not the O2 branded one) and it worked
Click to expand...
Click to collapse
Told you

Can i flash verizon nougat sm n920v on my sm n920f?

I have a (modified) Samsung Galaxy note5 with model SM N920f, while I found confusing articles online about note5 not been released in Europe and that this is note an original model number, I installed the phoneinfo app to verify what model my phone is, and this is what I got below:
Bootloader Version
N920VVRU2AOJ2
PDA Version
N920FXXU2AOJ2
CSC Version
N920VVZW2AOJ2
Baseband Version
N920VVRU2AOJ2
Latest Firmware
Not Found
Kernel Version
3.10.61-5922942-eng
[email protected] #1
64-bit
Android Version
5.1.1
Build Number
LMY47X.N920FXXU2AOJ2
Build Fingerprint
Verizon/nobleltevzw:5.1.1/LMY47X/N920FXXU2AOJ2:user/release-keys
Build Description
nobleltevzw-user 5.1.1 LMY47X N920FXXU2AOJ2 release-keys
Build Date
Mon Oct 5 14:52:47 KST 2015
Platform/Chip
exynos5/exynos7420
Hardware Revision
N920V.04
Your quick response will be highly appreciated, thanks.

Looks like your model is N920V, Verizon model with a custom rom on it. You should be able to flash verizon firmware without issue

but how could he have a custom Rom on a verizon model???

trollingwhovian said:
but how could he have a custom Rom on a verizon model???
Click to expand...
Click to collapse
I don't think it is a custom rom, I think It is a modified Stock Verizon Rom. Sm N920f doesn't exist as an original model as Samsung didn't do an European version of the Note5, phone info also said that is not refurbish. if you look at the phone details as I earlier posted you will see a mixup of Both N920f and N920v, I am just looking to hear from someone who as done it before, I don't want to brick this phone, I just got it.

same problem
i have same problem when i check about on devices its show N920F but when i check it using Phone Info Samsung it show N920V
if i flash it using N920V firmware, it will lock network to verizon? i use indonesian sim on it now.
if that locked to verizon how to unlock it again like now i used
Thanks for your help

I took a risk and flashed stock nougat (i found link on xdadevelopers website) on my so called n920f. Actually phone is not N920F, firmware was modifed to remove the branding. Its actually N920V.
To conclude, I flashed nougat 7.0 and its working perfectly, without any issue. I was worried regarding carrier locking after flashing the stock nougat, but it didn't as verizone says they don't lock LTE phones.

majidkorai said:
I took a risk and flashed stock nougat (i found link on xdadevelopers website) on my so called n920f. Actually phone is not N920F, firmware was modifed to remove the branding. Its actually N920V.
To conclude, I flashed nougat 7.0 and its working perfectly, without any issue. I was worried regarding carrier locking after flashing the stock nougat, but it didn't as verizone says they don't lock LTE phones.
Click to expand...
Click to collapse
This is good for the ear, I have downloaded the 7.0 rom since but wasn't sure about been locked, thanks for sharing this, you just gave me confidence.

majidkorai said:
I took a risk and flashed stock nougat (i found link on xdadevelopers website) on my so called n920f. Actually phone is not N920F, firmware was modifed to remove the branding. Its actually N920V.
To conclude, I flashed nougat 7.0 and its working perfectly, without any issue. I was worried regarding carrier locking after flashing the stock nougat, but it didn't as verizone says they don't lock LTE phones.
Click to expand...
Click to collapse
Please can you share me with your download link, the file I downloaded got corrupted, its 2.7gb, your quick reply will be highly appreciated, thanks.

Maverickme_ said:
Please can you share me with your download link, the file I downloaded got corrupted, its 2.7gb, your quick reply will be highly appreciated, thanks.
Click to expand...
Click to collapse
JUST search for NOUGAT for n920v, first link will be from xda forum, where some one has shared the link.

majidkorai said:
JUST search for NOUGAT for n920v, first link will be from xda forum, where some one has shared the link.
Click to expand...
Click to collapse
What is your file size?, I downloaded the corrupt 2.7 gb from Xdadevelopers as well, will appreciate if you can share me the link, thanks.

Maverickme_ said:
What is your file size?, I downloaded the corrupt 2.7 gb from Xdadevelopers as well, will appreciate if you can share me the link, thanks.
Click to expand...
Click to collapse
file size is 2.5 GB.
You can try downloading again. It worked for me without any issue.

majidkorai said:
file size is 2.5 GB.
You can try downloading again. It worked for me without any issue.
Click to expand...
Click to collapse
Thanks I will try it again

sm 920v became sm 920f
im from philippines. i tried my note 5 to update but stock in lollipop then i found out that its from verizon the real model is sm 920v and it was a custom rom of sm 920f. i read some replies here and im waiting for if i could flash nougat rom in sm 920v since its verizon does it can access the network signal
hope someone could help me this.

From N920F to N920V just download and install "Samsung Smart Switch" software on your PC, open the application and connect your phone to PC, click "MORE" , choose "Emergency Software Recovery & Initialization" then follow the instruction. It will reset to factory setting and upgrade the latest firmware (Nougat 7.0). The firmware is carrier unlock.

zhyril103085 said:
im from philippines. i tried my note 5 to update but stock in lollipop then i found out that its from verizon the real model is sm 920v and it was a custom rom of sm 920f. i read some replies here and im waiting for if i could flash nougat rom in sm 920v since its verizon does it can access the network signal
hope someone could help me this.
Click to expand...
Click to collapse
From N920F to N920V just download and install "Samsung Smart Switch" software on your PC, open the application and connect your phone to PC, click "MORE" , choose "Emergency Software Recovery & Initialization" then follow the instruction. It will reset to factory setting and upgrade the latest firmware (Nougat 7.0). The firmware is carrier unlock.

sm 920v became sm 920f
does it have effect if the unit was rooted..
i hope it will works and the network carrier unlock also

zamree said:
From N920F to N920V just download and install "Samsung Smart Switch" software on your PC, open the application and connect your phone to PC, click "MORE" , choose "Emergency Software Recovery & Initialization" then follow the instruction. It will reset to factory setting and upgrade the latest firmware (Nougat 7.0). The firmware is carrier unlock.
Click to expand...
Click to collapse
You mean smartswitch will do an OTA update? Or you have to downloaded rom and use Odin?

Maverickme_ said:
You mean smartswitch will do an OTA update? Or you have to downloaded rom and use Odin?
Click to expand...
Click to collapse
Yes, Smart Switch will do an OTA update automatically, no need ODIN because your phone has reset to normal factory setting with phone model N920V, no more N920F.

sm 920v became sm 920f
zamree said:
From N920F to N920V just download and install "Samsung Smart Switch" software on your PC, open the application and connect your phone to PC, click "MORE" , choose "Emergency Software Recovery & Initialization" then follow the instruction. It will reset to factory setting and upgrade the latest firmware (Nougat 7.0). The firmware is carrier unlock.
Click to expand...
Click to collapse
unfortunately i tried it but theres no file for emergecy recovery

zhyril103085 said:
unfortunately i tried it but theres no file for emergecy recovery
Click to expand...
Click to collapse
Click tab "Device Initialization"

It is possible to eliminate the Service Provider SW version from my SM-G955U1?

Folks,
Happy 2018,
Quick one:
I bought a locked ATT SM-G955U & reflashed it to a SM-G955U1 (currently on the latest December Security update) but the issue here is that despite doing this and eliminating ATT bloatware my phone continues to show Service Provider SW Ver. 9889544437594c3958 XAA//ATT
My buddy have an unlocked SM-G955U1 out of the box & there is no Service Provider information on his phone settings. He also gets all updates via OTA without issues, whereas I need to flash using ODIN manually which is not an issue for me but will be easier to get the OTA updates.
My phone is almost perfect but is there any possibility of flashing the specific CSC file for the SM-G955U1 on my SM-G955U transformed to a SM-G955U1?
I guess this was explained clearly.
Thanks for your support. XDA is the best.

SW, if listed as xaa/xaa/att...is what you wanted. The last three are always hardwired. I bought a T-Mobile U1 and switched it to Verizon. So mine now says vzw/vzw/tmo. If I read correctly in previous postings, you may still be forced to update manually, if on ATT. I believe...

If you flashed the files correctly in ODIN, then you wont see the provider version at all. It doesn't appear in the unlocked firmware. And you'll also get OTAs just fine. I know, because I bought a VZW 955U and flashed it with the unlocked 955U1 software.

Yup I can confirm too. I flashed the unlocked firmware to my spring g955u.
I can get OTA updates same with unlocked phone

Precisely .. I need to flash the correct one...
Where do I get the unlocked firmware ?

rich168 said:
Yup I can confirm too. I flashed the unlocked firmware to my spring g955u.
I can get OTA updates same with unlocked phone
Click to expand...
Click to collapse
Did you use regular ODIN or the modded Odin?
Where do you get the unlocked firmware from?
I got it from sammobile & the SW version persists

henrickrw said:
Did you use regular ODIN or the modded Odin?
Where do you get the unlocked firmware from?
I got it from sammobile & the SW version persists
Click to expand...
Click to collapse
Nodded odin
Check snap+ thread

Unable to flash AT&T firmware on regular Note 10

I have flashed both the ATT and USC firmwares for the SM-N970U1 but still no wifi calling option. At this point I don't know if I've actually flashed the ATT firmware or not. Odin says Pass. Under the Service Provider SW ver. it makes mention of ATT/ATT/XAA but I'm not sure if that means the phone is on the ATT network or if that's firmware info. How do I tell what firmware I've actually flashed?

rmrl2008 said:
I have flashed both the ATT and USC firmwares for the SM-N970U1 but still no wifi calling option. At this point I don't know if I've actually flashed the ATT firmware or not. Odin says Pass. Under the Service Provider SW ver. it makes mention of ATT/ATT/XAA but I'm not sure if that means the phone is on the ATT network or if that's firmware info. How do I tell what firmware I've actually flashed?
Click to expand...
Click to collapse
There is already a thread on this and one of the members was nice enough to post exactly what firmware to flash.
I suggest looking for that thread its exactly what you need

That thread is for the Note 10 plus. I'm asking about the Note 10. That's where I got the idea to flash the USC version from but like I said, didn't work.

rmrl2008 said:
That thread is for the Note 10 plus. I'm asking about the Note 10. That's where I got the idea to flash the USC version from but like I said, didn't work.
Click to expand...
Click to collapse
Bummer, figured the thread would give you enough guidance to get it done on the smaller one.
Of course samsung has to make it difficult lol

I used the home_csc file instead of the csc. That should not have been an issue. I assume I'm still on the unlocked firmware but I have no clue. I don't see any AT&T bloatware or Logo. I downloaded the firmwares from the sammobile site. Even downloaded from the samfirm app just in case. So I flashed 3 times. No difference.

rmrl2008 said:
I used the home_csc file instead of the csc. That should not have been an issue. I assume I'm still on the unlocked firmware but I have no clue. I don't see any AT&T bloatware or Logo. I downloaded the firmwares from the sammobile site. Even downloaded from the samfirm app just in case. So I flashed 3 times. No difference.
Click to expand...
Click to collapse
What did you type into the SamFirm when you searched for firmware for your AT&T?

SM-N970U1 and ATT

rmrl2008 said:
SM-N970U1 and ATT
Click to expand...
Click to collapse
Maybe ATT doesn't put their firmware online as I tried searching and couldn't find on SamFirm. I am on T-Mobile and we have 2 different firmware versions.
If I type in SamFirm the following:
1) SM-N970U1 and region: TMB - I will get pretty much same unlocked firmware that I had on the phone, nothing will pretty much change after flashing this firmware.
2) SM-N970U and region: TMB - I will get T-Mobile firmware that is on their branded devices and all features.
Ask the OP in the below thread for latest ATT firmware file(userdata). If you recently flashed firmware, but the firmware in the thread is a bit older, you may not be able to flash until newer version is released.
https://forum.xda-developers.com/galaxy-note-10/how-to/n970u-n970u1-firmware-links-t3957705

So should I search for SM-N970U and ATT instead?

I did also do an ota update when I first got my phone so I have the August security update. Not sure if that's an issue since I have newer update?

rmrl2008 said:
So should I search for SM-N970U and ATT instead?
Click to expand...
Click to collapse
Normally that is correct, but it doesn't look like ATT is putting their firmware up on server as other carriers do.
Go to the link I provided of that thread. Click on the first link that says U firmware. Then look a bit down where is says: SGO - 1 - 9.0. After this link opens, you will see first 2 files: N970U_SGO_1.zip and USERDATA_ATT... You can try to download these files, extract to a folder and flash including the userdata file. If it fails, then you may need to wait until this person provides new firmware and you will need to download the firmware and that userdata_att

Yeah At&t is horrible about posting firmware. I usually just use USC firmware and once installed it will provision to At&t based on sim and you will get all At&t carrier options such as Volte..wificalling..advanced messaging.
Sent from my SM-N960U using Tapatalk

Thanks yeah that's what I'm about to do. My mistake was downloading from the U1 section instead of U. So confusing. Why even have any carrier firmwares under the U1 section?

Flashed the U / USC firmware and got AT&T firmware.

rmrl2008 said:
Flashed the U / USC firmware and got AT&T firmware.
Click to expand...
Click to collapse
Are you on the July security patch? I just did this process with the ATT firmware and it says up to date with July security patch. On the U1 unlocked firmware, I was on August already. I just wanted to be sure I didnt mess up something and it wont update properly.

I am on the August security update. That was part of the USC firmware. I didn't do an ota update after flashing so at this point I don't know if ota updates will work for me.

rmrl2008 said:
I am on the August security update. That was part of the USC firmware. I didn't do an ota update after flashing so at this point I don't know if ota updates will work for me.
Click to expand...
Click to collapse
Did you download your files from here https://androidfilehost.com/?w=files&flid=297974 ? Thats here I got mine and its for the SGO firmware on Note 10. Im thinking something went wrong now becasue mine wont update OTA and smart switch says im up to date when there is another firmware for ATT out - ASH4 version.

I got it from samfirm which is the ash4 version.

rmrl2008 said:
I got it from samfirm which is the ash4 version.
Click to expand...
Click to collapse
Thanks. What did you put for Model# and region? I input SM-N970U and USA(AWS) and nothing pops up. Using samfirm 0.4.0

Use USC for region