Hello guys
Basically I replaced my screen, everything is working fine except for the capacitive buttons. What did I do wrong? I checked all the flex cables and they all seem to be plugged correctly.
tanton50 said:
Hello guys
Basically I replaced my screen, everything is working fine except for the capacitive buttons. What did I do wrong? I checked all the flex cables and they all seem to be plugged correctly.
Click to expand...
Click to collapse
Did u clean off all the glue CAREFULLY?? Mines wasnt workn after i replaced my digitizer and i realized there was a lil bit of glue on them so i carefully peeled it off and they started workn again....
Sent from my SGH-I727 using xda app-developers app
Thanks!
I'll disassemble it one more time to check one I get back home
tanton50 said:
Thanks!
I'll disassemble it one more time to check one I get back home
Click to expand...
Click to collapse
No problem....also make sure none of the old glue is stuck to any part of the strip that connects the buttons to the motherboard. Wen mines didnt work i was just thinkn of using tablet mode from paranoid android but i solved my problem so it wasnt necessary.....hope u get urs workn again
Sent from my SGH-I727 using xda app-developers app
aah damn I realized my mistake. I tore flex cable from the capacitive buttons by mistake when I took out the old screen :/ good thing it's only $9 off ebay.
tanton50 said:
aah damn I realized my mistake. I tore flex cable from the capacitive buttons by mistake when I took out the old screen :/ good thing it's only $9 off ebay.
Click to expand...
Click to collapse
That sux man....glad u got ur problem figured out tho
Sent from my SGH-I727 using xda app-developers app
Related
I was wondering if anyone of you have experienced this issue. If I press down on the screen right under the search icon in the lower right corner, the glass ever so slightly, very softly presses down. Almost as if the glue is soft or there is nothing hard there. Also I get the screen discoloration that happens when you do that to an lcd screen.
I have read online that others have this issue and even the demo units at the att stores do it as well. Keep in mind that there is no light bleeding through and the glass is not raised just presses down.
What do you all think?
Sent from my Desire HD using XDA Premium App
I noticed this on my aria. Its how I got it upgraded to the inspire. These screens are attached with a thin layer of double sided adhesive. Think of it as ultra thin 3m tape. I think it might actually keep the screen from breaking under light stress. I would keep an eye on it and if it gets worse maybe call HTC for repair.
Never had any issue with the digitizer because of it tho.
Sent from my Desire HD using XDA App
Thanks for the reply. Not sure how it makes me feel though. I don't think I'll return it just yet.
Sent from my Desire HD using XDA Premium App
Mine does the same in the bottom. I've also noticed not all 4 corners are equally flush with the black ring that goes around the screen. O well, small thing really. Phone is so amazing.
Yeah I love this phone. I swapped it out and now everything is good. The only thing though is that out of the 3 they pulled out, 2 had dirt under the screen. That tells me we might need to figure something to fortify the screen better.
Sent from my Desire HD using XDA Premium App
That bugs the hell out of me! I wish i would have saw that before my return period expired
Your phone has a 1 year warranty tho. So if it gets worse you can at least have it repaired. I would really suggest getting it fixed because that creates a paper trail.
Sent from my Desire HD using XDA App
mine does this too. I guess I'm heading to the AT&T store.
Did you have any issue swapping it out ? I'm 2 days past my 30
discord2k said:
Yeah I love this phone. I swapped it out and now everything is good. The only thing though is that out of the 3 they pulled out, 2 had dirt under the screen. That tells me we might need to figure something to fortify the screen better.
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Sent from my Desire HD using Tapatalk
I tried to swap mine out within my 30 day period, and the sales guy told me he couldn't give me a new inspire (because the demo model and his personal one had the same issue) but would let me get an atrix. I still have my inspire, funky screen and all!
Mine does the same thing. I wonder if all of them do it? did the one you swapped for do it too?
Also when I went in and talked to the radio shack guy he told me that if I put something heavy on it overnight it would reattach to the double stick tape if I didnt want to return it. Also can your return a phone with this issue rooted and s-off? or do you need to go through the process of returning to stock?
I would take it back stock. It seems to be an issue that doesn't affect the phone. Only thing that sucks is returning it to find out the replacement is worst or better yet, get one with dust under the screen. Also it seems to be at the corner of the screen where you normally wouldn't press on the screen.
Sent from my Desire HD using XDA Premium App
My wifes inspire doesn't have the problem
Sent from my Desire HD using Tapatalk
Ok back from the ATT store they swapped my phone no questions asked
Sent from my Desire HD using Tapatalk
Did you un root?
Sent from my Desire HD using XDA App
Mine new one is better
I had no problem trading mine in at all. My new one is much better. Well, actually it has no problems at all. My screen was making an audible clicking when I pressed it down. I just don't touch that section of the screen at all cause I am afraid to hear it again.
My screen is okay. I guess this problem is there for most devices with LCD touch screens. To make it slim/light/cheap the screen rests on a really thin platform I feel.
On a off topic : -This happened with my iPod. I went to the "genius" bar and that guy brought 10 different iPods out and showed me by pressing the bottom right part of the screen that this is "common" .... I had no better argument then.
laxwillsch said:
Did you un root?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Yes. reloaded back to stock.
discord2k said:
I had no problem trading mine in at all. My new one is much better. Well, actually it has no problems at all. My screen was making an audible clicking when I pressed it down. I just don't touch that section of the screen at all cause I am afraid to hear it again.
Click to expand...
Click to collapse
Mine clicked too. It made me nervous.
Were you s-on or did you just reintall stock with out turning it on?
Sent from my Desire HD using XDA Premium App
So my phone wasnt locked into its holster and slipped out :crying:
I checked it and there was no cosmetic damage and the screen wasnt cracked or anything but I think my home button got smashed in a little bit
its almost seemless with the rest of the phone...anyone else like this or is this just how the phone is?
1st pic - side
2nd pic - top
3rd pic - bottom
Looks normal to me.....
Sent from my SCH-I535 using xda app-developers app
jeriel05 said:
Looks normal to me.....
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
ok just making sure because I saw another pic and it looked like the home button was out more
yeah, mines pretty flush also. Looks ok to me. Ive never dropped mine
Yea my PB is just about flush but my wife's white one is raised some. Probably just a manufacturer flaw in them
Sent from my SCH-I535 using xda app-developers app
Yeah my pebble blue home button sits flush as well and I was worried about this too when I saw a white demo unit with a slightly raised one. Not a big deal, but I wouldn't mind it sitting a little higher.
Sent from my SGH-T999 using xda app-developers app
So I broke my power button and can't turn the phone on. Any suggestions?
dcaples002 said:
So I broke my power button and can't turn the phone on. Any suggestions?
Click to expand...
Click to collapse
You would have to open the phone up. Might as well buy a new power button first.
exad said:
You would have to open the phone up. Might as well buy a new power button first.
Click to expand...
Click to collapse
I already opened the phone and ordered a new one from ebay. It is in china so it wont be hear for a week and a half but im wondering if there's an alternative way or trick to turn this phone on.
dcaples002 said:
I already opened the phone and ordered a new one from ebay. It is in china so it wont be hear for a week and a half but im wondering if there's an alternative way or trick to turn this phone on.
Click to expand...
Click to collapse
How many contacts does the power button have?
Sent from my TouchPad using xda app-developers app
It depends where it's broken.
sweep2wake
ethantarheels123 said:
sweep2wake
Click to expand...
Click to collapse
Sweep to wake won't turn a phone on if it's off.... It will only turn the screen on if it's asleep.
oh lol misread then.
exad said:
It depends where it's broken.
Click to expand...
Click to collapse
The flex ribbon itself isn't broken. The plastic film with the black dot in it fell off so I can't push it in.
Take a picture.
Sent from my One X using xda app-developers app
exad said:
Take a picture.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
the gold tape with the black dot in the upper left fell off
If it's what I think you're talking about, I don't think you can
Sent from my One X using xda app-developers app
exad said:
If it's what I think you're talking about, I don't think you can
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Here's a pic of mine.
Ahhhh do you still have the piece that's supposed to go there?
Sent from my One X using xda app-developers app
exad said:
Ahhhh do you still have the piece that's supposed to go there?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
No. I know if I had it I could just place it there and push it but i'm wondering if there are any alternative ways to manipulate the flex cable or tricks to power it on without using it.
dcaples002 said:
No. I know if I had it I could just place it there and push it but i'm wondering if there are any alternative ways to manipulate the flex cable or tricks to power it on without using it.
Click to expand...
Click to collapse
Apple uses the same type of buttons on the iphone 4, 4s, 5 and ipod touch 4th gen. I have fixed quite a few power buttons on the 4 and 4s. You may be able to get a home button flex cable for an ipod 4g and use the tape and button from it. It may be worth a try.
Have you tried pushing a needle or paperclip?
Sent from my One X using xda app-developers app
Will it turn on if you plug it into your computer?
thebobmannh said:
Will it turn on if you plug it into your computer?
Click to expand...
Click to collapse
BAH! I never even thought of that.. that might actually do it! If I could thank you a hundred times I would.
exad said:
BAH! I never even thought of that.. that might actually do it! If I could thank you a hundred times I would.
Click to expand...
Click to collapse
Ha, I only thought of it because I messed up my power button when I put my phone back together after replacing the screen, and plugging it in woke it up so I could at least see that the screen worked.
Today I booted up my tf101 and the screen stayed black then flickered blue lines across the top. I tried hard reset, no dice, tried to boot into twrp (I was running katkiss 4.4 fine for weeks), and the screen flickered blurry images, nothing. Tried to push stock software with easy flasher, looks like it works, but same issue when I turn the tablet back on. Weird thing is my pc still sees my tablet and ext sd files. Anyone have any ideas? My son is not a happy camper at the moment.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Is there a chance it has been knocked or dropped ?
The display cable has a habit of coming lose pretty easily if they receive a bump but are fairly simple to fix if you don't mind opening it
Have a look at the links in this thread to check that cable
http://forum.xda-developers.com/showthread.php?t=2457848
*Detection* said:
Is there a chance it has been knocked or dropped ?
The display cable has a habit of coming lose pretty easily if they receive a bump but are fairly simple to fix if you don't mind opening it
Have a look at the links in this thread to check that cable
http://forum.xda-developers.com/showthread.php?t=2457848
Click to expand...
Click to collapse
Thanks man, I bet that's what it is. I don't have a n5 bit to pull it apart, I'll have to stop at the hardware store tomorrow.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Good luck!
I think I just used a normal pozzy screwdriver with mine, get one the right size with a little extra pressure and they turn ok - its only the first 2 screws near the charging port that are Torx, the rest inside are all tiny phillips
*Detection* said:
Good luck!
I think I just used a normal pozzy screwdriver with mine, get one the right size with a little extra pressure and they turn ok - its only the first 2 screws near the charging port that are Torx, the rest inside are all tiny phillips
Click to expand...
Click to collapse
It worked! Thanks again!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
JB910 said:
It worked! Thanks again!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Great :good:
Hi! Yesterday I took my Nexus 5 on a trip on top of my car and he decided to take a jump to see what will happen... Anyway, after really exciting jump and after I've found him, he was pretty much destroyed, but still working. So, I ordered new display with side bezels and repaired him today. At first everything seemed to be working, but now WiFi and Bluetooth won't turn on. I've took the back panel off to make sure everything is OK, and then I could turn Bluetooth on. After putting everything together again, it won't turn on. And I saw that for some short period of time, just after I assembled the phone, it had WiFi. :-/
So, now I'm confused.
Is it possible to have software issue, or could it still be hardware?
How can I, anyway, check if everything works with hardware?
Btw. I'm still on stock unrooted ROM. (Wanted to see how it is to have a stable ROM after couple of years )
Sent from my Nexus 5 using xda app-developers app
If anyone is interested how I saw the WiFi was on or how it shows now...
Here you are...
Sent from my Nexus 5 using xda app-developers app
And... For those interested in how it looks...
Shattered, new original display, assembled again
Sent from my Nexus 5 using xda app-developers app
_BluE_AngeL_ said:
Hi! Yesterday I took my Nexus 5 on a trip on top of my car and he decided to take a jump to see what will happen... Anyway, after really exciting jump and after I've found him, he was pretty much destroyed, but still working. So, I ordered new display with side bezels and repaired him today. At first everything seemed to be working, but now WiFi and Bluetooth won't turn on. I've took the back panel off to make sure everything is OK, and then I could turn Bluetooth on. After putting everything together again, it won't turn on. And I saw that for some short period of time, just after I assembled the phone, it had WiFi. :-/
So, now I'm confused.
Is it possible to have software issue, or could it still be hardware?
How can I, anyway, check if everything works with hardware?
Btw. I'm still on stock unrooted ROM. (Wanted to see how it is to have a stable ROM after couple of years )
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
i'm 99 percent sure it's hardware. software is flashed into chips so that cannot be the issue. it's hard to find out yourself wich part is broken. the best thing you can do is send it to your seller or a near phone shop.
Did the screen flicker what so ever? This happen to me because the screen was not original and I end up sending it back to the seller. Where did you get your screen from? You might have broke something when assemble.
Sent from my Nexus 5 using xda app-developers app
wow! That's what I would call a well shattered screen.
I would suggest you to take it apart again if that's not too hard to do, blow the logic board in case some particles are rolling on it and reassemble it. It could do the trick eventually. Re-flashing stock Rom shouldn't be ignored. At least on a PC, a driver can get corrupted when a laptop falls.
GUGUITOMTG4 said:
wow! That's what I would call a well shattered screen.
I would suggest you to take it apart again if that's not too hard to do, blow the logic board in case some particles are rolling on it and reassemble it. It could do the trick eventually. Re-flashing stock Rom shouldn't be ignored. At least on a PC, a driver can get corrupted when a laptop falls.
Click to expand...
Click to collapse
This was my screen lol
Sent from my Nexus 5 using xda app-developers app
I was thinking that too, but why it worked for some time then...
Maybe some of the connections are not connected well.
I'll try to see it one more time tomorrow...
Sent from my Nexus 5 using xda app-developers app
I ordered my screen from vodafone repair service in Nürnberg, Germany and it came the day after. (It costs 140€, and if you want the repair too, then it's 199€. Not very happy about the price...) My replace screen is original from LG and works perfectly. I have to say- maybe even better than the old one. No flickering whatsoever. Backlight is also a bit better because it is equally divided over the screen. Plus, the bezels had new buttons on it, and now has smaller holes on the bottom and power button doesn't rattle any more. From the outside, only the back cover now has two small scratches. everything else is great.
I'm pretty much sure that something didn't connected correctly because sometimes bluetooth works. Tomorrow I'll disassemble it again and see.
Sent from my Nexus 5 using xda app-developers app
Maybe its better to send it to lg for repairs? That's what I'm planning to do. I bought my replacement screen for 150 and it was just hell because so many issues. That's the same price for a repair by lg. Im going to sent it to lg soon but not yet because I been to lazy lol.
Sent from my Nexus 5 using xda app-developers app
The service wanted to charge me almost 60€ more for their work, plus they said that they would most probably reflash the ROM and I would lose all my data...
And I only wanted to save my data. So, for me, this is the best solution.
Sent from my Nexus 5 using xda app-developers app
Sounds like the antennas are not contacting properly. Seems it can happen to anyone upon removing the backplate.
Sent from my Nexus 5 using Tapatalk
I've just disassembled it and reassembled again. Everything looks good. All connections are good and nothing seems to be loose.
I even tried to press the back panel around the camera lens to make a better contact with the antenna, but still nothing.
Looks like this in the WiFi settings...
So, actually, I think it's a software problem and am going to root it now and flash the new ROM.
After that we'll see.
If there isn't any success after that, you all know where to find spare parts for your Nexus 5.
Sent from my Nexus 5 using xda app-developers app
_BluE_AngeL_ said:
I've just disassembled it and reassembled again. Everything looks good. All connections are good and nothing seems to be loose.
I even tried to press the back panel around the camera lens to make a better contact with the antenna, but still nothing.
Looks like this in the WiFi settings...
So, actually, I think it's a software problem and am going to root it now and flash the new ROM.
After that we'll see.
If there isn't any success after that, you all know where to find spare parts for your Nexus 5.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Hope it's just software issue, reflash stock after unlocking bootloader http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
GUGUITOMTG4 said:
Hope it's just software issue, reflash stock after unlocking bootloader http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Click to expand...
Click to collapse
I just finished reflashing the stock ROM and it seems like it wasn't a software issue... after selecting the language it says "Turning Wi-Fi on..." and it doesn't do anything...
More suggestions?