100% Stock version of the 3.33.401.53 & 3.33.401.153 ROMs and that means:
- No Root
- No Busybox
- Secured boot.img
For 3.33.401.53 the OTA was applied to Namit1994 stock 3.33.401.6, so his tools to root, unsecure boot, etc will work on this one.
For 3.33.401.153 zip was built from Football's RUU. Namit1994 tools should work also.
Any dev can feel free to use it as base and do whatever he wants with it, no credit is necessary.
Download link 3.33.401.55
Download link 3.33.401.153
if i flash it with my current fw(see my signature) will it booted after installation?
rzr86 said:
if i flash it with my current fw(see my signature) will it booted after installation?
Click to expand...
Click to collapse
It has been tested with FW 3.33 and this is the Firmware recommended, however it should work with 3.32 FW. Nandroid your setup and give it a try. Let us know!!
papete said:
It has been tested with FW 3.33 and this is the Firmware recommended, however it should work with 3.32 FW. Nandroid your setup and give it a try. Let us know!!
Click to expand...
Click to collapse
i flashed it and it booted up perfectly
no issues so far:good:
Whats the change log for this build.
goggi10 said:
Whats the change log for this build.
Click to expand...
Click to collapse
Ask HTC
papete said:
100% Stock version of the 3.33.401.53 ROM and that means:
- No Root
- No Busybox
- Secured boot.img
The OTA was applied to Namit1994 stock 3.33.401.6, so his tools to root, unsecure boot, etc will work on this one.
Any dev can feel free to use it as base and do whatever he wants with it, no credit is necessary.
Download link
Click to expand...
Click to collapse
Thanks for this. Time to rebase.
If you don't mind my asking, how did you apply the OTA files to the previous 3.33.401.6 base? I wanted to do it myself, but I'm not really sure how it's done.
Anybody have perceived changes noticed?
Sent from my HTC Sensation 4G using xda premium
rawrfische said:
Thanks for this. Time to rebase.
If you don't mind my asking, how did you apply the OTA files to the previous 3.33.401.6 base? I wanted to do it myself, but I'm not really sure how it's done.
Click to expand...
Click to collapse
Ideal way to flash is download pure stock odexed 3.33.401.6 then flash then flash the OTA file (you can find the fotadl.htc.com link posted by me somewhere in the dev section - page 2 I think) then just flash that through recovery.
If that doesnt work run the 3.33.401.6 RUU, extract rom.zip from it, open the rom.zip file up, delete everything in it except boot.img and system.img then rename the zip to PG58IMG.zip and flash through hboot, then flash the OTA.zip file through recovery
Jonny said:
Ideal way to flash is download pure stock odexed 3.33.401.6 then flash then flash the OTA file (you can find the fotadl.htc.com link posted by me somewhere in the dev section - page 2 I think) then just flash that through recovery.
If that doesnt work run the 3.33.401.6 RUU, extract rom.zip from it, open the rom.zip file up, delete everything in it except boot.img and system.img then rename the zip to PG58IMG.zip and flash through hboot, then flash the OTA.zip file through recovery
Click to expand...
Click to collapse
Thanks Jonny, the reply is much appreciated.
Though I was really wondering how OP applied the files within the OTA zip to the older base to make a flashable 3.33.401.53 ROM zip. Like did he open up a completely stock odexed 3.33.401.6 ROM zip and just place the OTA files in their appropriate folders? What to do with the stuff in the "patch" folder? I dabble in cooking ROMs for fun, so I was just looking to rebase a new ROM for my wife and myself. I'll end up using OP's zip as a base now, but I was just wondering how he made it.
/edit
I just looked in the updater script for that OTA zip and now I'm even more confused as to how to apply these patches/files manually to make a new flashable base. It's definitely not a simple copy/paste into zip. :silly:
rawrfische said:
Thanks Jonny, the reply is much appreciated.
Though I was really wondering how OP applied the files within the OTA zip to the older base to make a flashable 3.33.401.53 ROM zip. Like did he open up a completely stock odexed 3.33.401.6 ROM zip and just place the OTA files in their appropriate folders? What to do with the stuff in the "patch" folder? I dabble in cooking ROMs for fun, so I was just looking to rebase a new ROM for my wife and myself. I'll end up using OP's zip as a base now, but I was just wondering how he made it.
/edit
I just looked in the updater script for that OTA zip and now I'm even more confused as to how to apply these patches/files manually to make a new flashable base. It's definitely not a simple copy/paste into zip. :silly:
Click to expand...
Click to collapse
Yeah what you have to do is flash the base (3.33.401.6) then OTA on top of it (3.33.401.53) then using a file explorer (root explorer or similar) copy the entire /system partition to microsd card then transfer that to pc, add own updater-script and just build into a zip file, thats called creating a "System Dump"
Ahhh so simple, I can't believe I didn't think of doing that even though I've been ripping up ROM zips for a few months now.
And now I know what the term "system dump" means. All of those old posts of people posting leaked ICS system dumps back in the day suddenly make sense.
Again, thanks for the education Jonny. I've been enlightened.
i noticed in this update that ringtones do not reset after you restart your phone
papete said:
100% Stock version of the 3.33.401.53 ROM and that means:
- No Root
- No Busybox
- Secured boot.img
The OTA was applied to Namit1994 stock 3.33.401.6, so his tools to root, unsecure boot, etc will work on this one.
Any dev can feel free to use it as base and do whatever he wants with it, no credit is necessary.
Download link
Click to expand...
Click to collapse
My phone restarts using the root from the link you gave.
Do you have a link to another root for this rom version?
lallolu said:
My phone restarts using the root from the link you gave.
Do you have a link to another root for this rom version?
Click to expand...
Click to collapse
You can go directly to Chainfire's SuperSU page or ChainsDD page. There you can find flashable zips that will give you root.
153 too
Added 3.33.401.153 zip link in OP
papete said:
Added 3.33.401.153 zip link in OP
Click to expand...
Click to collapse
Lolz, I didnt think anyone would do it so I posted it, and now there are 2 threads with stock 3.33.401.153 ROMs
Oh well, I'm sure we'll live with it :thumbup:
Jonny said:
Lolz, I didnt think anyone would do it so I posted it, and now there are 2 threads with stock 3.33.401.153 ROMs
Oh well, I'm sure we'll live with it :thumbup:
Click to expand...
Click to collapse
You are too quick Jonny...:good:
Lionhardt said:
Anybody have perceived changes noticed?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
ringtones no longer resets after rebooting
.55 is here
OP updated with the latest OTA 3.33.401.55
Some binaries were updated, but I've noticed that this time the radio image is different, so it should be a new radio (haven't tested myself yet). So probably to get all the benefits of this latest update it would be good to update the radio also. For that ask on the firmware thread or the Radio/RIL's thread to update the radio with the one included in this OTA. Otherwise you can update the radio.img yourself by using a PG58IMG zip
Merry Christmas to all!!
Related
ive unlocked my phone but it shoe no signal
when i go to the setting to it wont let me search for the network
.will this radio fix things ,if not what will
You can try flashing a radio, but you need to be s-off. Go to kohr-ah's firmware thread and flash 3.33 universal firmware after you are s-off.
Sent from my HTC Sensation
AndroidSupporter318 said:
You can try flashing a radio, but you need to be s-off. Go to kohr-ah's firmware thread and flash 3.33 universal firmware after you are s-off.
Sent from my HTC Sensation
Click to expand...
Click to collapse
so i just download ,follow instructions, and it will work. and this wont change my phone(delete anything)
Yes, It will change your firmware. Make nandroid backup first, and restore after you flash firmware 3.33. Also don't forget to delete that firmware file after you flash the firmware.
It won't delete or change any files or data on your phone.
Sent from my HTC Sensation
blitz100 said:
ive unlocked my phone but it shoe no signal
when i go to the setting to it wont let me search for the network
.will this radio fix things ,if not what will
Click to expand...
Click to collapse
If you are using CM10.1, which I'm guessing that you are, then your problem with the network search is not radio related. It's a known bug in CM10.1
The network search feature doesn't work. To my knowledge it doesn't work on any CM10.1 ROM for any device (I reserve the right to be wrong about that though)
You aren't doing anything wrong. There is nothing you can change to fix it. It has to be fixed in the CM source code.
If you are using CM9 please say so and we'll figure that out.
As for not getting any signal at all though, that may or may not be a different issue entirely. If CM 9 or 10.1 is booting for you (and if you are looking at the settings for it, then you are obviously booting) then you already have the updated firmware as both ROMs will only run on 3.32 or 3.33.
What country are you in and what network on your on?
Also, do you get no signal at all anywhere you go? Or is it just no signal at your house or something?
And if you switch to any other ICS or JB ROM do you get a signal? That's important. If you do then we can rule out a firmware, radio, or hardware issue.
---------- Post added at 01:37 PM ---------- Previous post was at 01:28 PM ----------
AndroidSupporter318 said:
Yes, It will change your firmware. Make nandroid backup first, and restore after you flash firmware 3.33. Also don't forget to delete that firmware file after you flash the firmware.
It won't delete or change any files or data on your phone.
Sent from my HTC Sensation
Click to expand...
Click to collapse
There is no need to restore a nandroid after flsahing Kohr - Ah's firmware packages. They do not replace the ROM.
However, flashing new firmware can screw with the ROM and send it into bootloops. But wiping cache and dalvik from recovery will fix that, if it even happens.
Could he just flash the radio.img by itself by extracting the radio image from the firmware?
Sent from my HTC Sensation
AndroidSupporter318 said:
Could he just flash the radio.img by itself by extracting the radio image from the firmware?
Sent from my HTC Sensation
Click to expand...
Click to collapse
Only if he repackaged it into a new PM58IMG.zip file. But there's no need for all that since Stempox has already done it.
See this post.
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
All the Sensastion radios already packaged into flashable PM58IMG.zip's without the rest of the firmware packages.
Skipjacks said:
Only if he repackaged it into a new PM58IMG.zip file. But there's no need for all that since Stempox has already done it.
See this post.
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
All the Sensastion radios already packaged into flashable PM58IMG.zip's without the rest of the firmware packages.
Click to expand...
Click to collapse
so i just flash it??
blitz100 said:
so i just flash it??
Click to expand...
Click to collapse
From stempox's thread yes
Sent from my HTC Sensation using xda premium
blitz100 said:
so i just flash it??
Click to expand...
Click to collapse
In boot loader, not in recovery.
Sent from your phone. You should be careful where you leave that thing.
i tried it and it aborted it
...
Skipjacks said:
In boot loader, not in recovery.
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
how do i do that
blitz100 said:
how do i do that
Click to expand...
Click to collapse
put the pg58img.zip in the root of the sdcard
then boot into bootloader
it will search for that zip and recognize it
it will ask you to do the update
but wait for Skipjacks to confirm it
i don't know much about radio/rils(i said the above because these are the steps that requires when you are flashing firmware)
rzr86 said:
put the pg58img.zip in the root of the sdcard
then boot into bootloader
it will search for that zip and recognize it
it will ask you to do the update
but wait for Skipjacks to confirm it
i don't know much about radio/rils(i said the above because these are the steps that requires when you are flashing firmware)
Click to expand...
Click to collapse
You don't need me. You are right!
But, check the md5 sum first after you download the pm58img.zip file. Check it against the on listed under the download link in Stempox's thread. If they don't match delete the file you downloaded and do not proceed.
Sent from your phone. You should be careful where you leave that thing.
As the tittle say, this one its a Stock ROM Sense 6.06.401.1 by HTC Android 4.4.3
Rom is made by the system dump from: HERE ( thanks @LlabTooFeR ) No Wipe ROM
Requesites:
Unlocked bootloader and Custom Recovery.
Instructions:
Go to TWRP ( tested with latest ) TWRP 2.7.1.1
( flashed over latest release 5.11.401.10 and everything its good
Select zip and flash.
One 6.06.401.1 for Custom Recovery
Mirror --> https://copy.com/XyR3yKTrjEQQ1Xyt
MD5: 43b9baece3c03ed880d0d8534f9c52bc
Stock Radio 6.06.401.1 for CustomRecovery / 4T.28.3218.04_10.33E.1718.01L ScreenPrint
Mirror --> https://copy.com/uADZQfhNhj7HqlrK
MD5: 26ac293910c7d2fbb3874ea301fe81d5
Stock Recovery 6.06.401.1
Mirror --> https://copy.com/LJAjKZl7GVwtoUaI
MD5: 07372a66ef42dfa6a6e33d8d5211d490
Happy Flashes
** For ROOT use the latest zip supplied by @Chainfire http://download.chainfire.eu/supersu
Cheers
Please dont mirror the ROM without asking perssion, if you want to use the ROM base its OK, just give apropriate credits and ask permission.
Link ON (uploaded completed)
And by stock do you mean the real HTC One GE edition rom?
Turbojugend said:
And by stock do you mean the real HTC One GE edition rom?
Click to expand...
Click to collapse
No, i mean the Sense Edition
Will add the info to OP
are we not getting complete stock version of 2.24.401.1 without root and anything ...
sagarsamtani said:
are we not getting complete stock version of 2.24.401.1 without root and anything ...
Click to expand...
Click to collapse
Well, i can put in OP a zip file, this one flashing over recovery will remove root if you want, or i can make one without root and busybox.
Wich method you prefer ?
Update:
Uploading version without ROOT and BusyBox
OP updated with ROM full stock without root and busybox...
Cheers
Hello nice job thank
Can you explain the sideload or maybe there a tread ?
JEZ69 said:
Hello nice job thank
Can you explain the sideload or maybe there a tread ?
Click to expand...
Click to collapse
Its easy, it requires ADB drivers instaled in PC and ADB commands to execute.
So, in TWRP you make a full WIPE, format data also.
Then you reboot recovery and over advanced you activate adb sideload.
Then connect phone to PC and send the zip file with command:
adb sideload name_of_the_rom.zip
Then just wait ADB send file to phone and then Recovery start flash of ROM .
danieldmm said:
Well, i can put in OP a zip file, this one flashing over recovery will remove root if you want, or i can make one without root and busybox.
Wich method you prefer ?
Update:
Uploading version without ROOT and BusyBox
Click to expand...
Click to collapse
danieldmm said:
Its easy, it requires ADB drivers instaled in PC and ADB commands to execute.
So, in TWRP you make a full WIPE, format data also.
Then you reboot recovery and over advanced you activate adb sideload.
Then connect phone to PC and send the zip file with command:
adb sideload name_of_the_rom.zip
Then just wait ADB send file to phone and then Recovery start flash of ROM .
Click to expand...
Click to collapse
Thank s for reply this work only with TWRP right?
andlast question this rom is reel stock i mean can we have ota with the non root version? with stock recovery and stock boot of course
danieldmm said:
Well, i can put in OP a zip file, this one flashing over recovery will remove root if you want, or i can make one without root and busybox.
Wich method you prefer ?
Update:
Uploading version without ROOT and BusyBox
Click to expand...
Click to collapse
Thanks thats what i wanted.. Awesome...
Sent from my iPad using Tapatalk HD
JEZ69 said:
Thank s for reply this work only with TWRP right?
andlast question this rom is reel stock i mean can we have ota with the non root version? with stock recovery and stock boot of course
Click to expand...
Click to collapse
With TWRP it works, i tested, other Recovery i dont know if they have sideload option.
Relative to OTA yes, with stock recovery you can have OTA. But i dont have stock recovery from this one since dump dont contain firmware.zip
Dont know if firmware.zip from 2.24.709.1 it will do the trick, but sincerelly i dont wait from OTA updates, its a loss of time
danieldmm said:
With TWRP it works, i tested, other Recovery i dont know if they have sideload option.
Relative to OTA yes, with stock recovery you can have OTA. But i dont have stock recovery from this one since dump dont contain firmware.zip
Dont know if firmware.zip from 2.24.709.1 it will do the trick, but sincerelly i dont wait from OTA updates, its a loss of time
Click to expand...
Click to collapse
i ask because we don t have the last ruu and for stock recovery we can have it here http://forum.xda-developers.com/showthread.php?t=2182823
is in the zip file.
you right for loos of time but I still did not unlock my devices first time i wait to do it....i mthinking about
JEZ69 said:
i ask because we don t have the last ruu and for stock recovery we can have it here http://forum.xda-developers.com/showthread.php?t=2182823
is in the zip file.
you right for loos of time but I still did not unlock my devices first time i wait to do it....i mthinking about
Click to expand...
Click to collapse
Thats correct, i did not know Mike already put the firmware zip, thanks for tell me in
Another thing, you must unlock bootloader to flash TWRP.
If needed you can have S-OFF and flash latest RUU x.xx.401.x and you are good to GO.
Cheers
Would this work with T-Mobile/AT&T versions?
Also sideloading doesn't touch the "sdcard" content right. We would just need to do a factory reset.
danieldmm said:
Thats correct, i did not know Mike already put the firmware zip, thanks for tell me in
Another thing, you must unlock bootloader to flash TWRP.
If needed you can have S-OFF and flash latest RUU x.xx.401.x and you are good to GO.
Cheers
Click to expand...
Click to collapse
thank s
brzgw said:
Would this work with T-Mobile/AT&T versions?
Also sideloading doesn't touch the "sdcard" content right. We would just need to do a factory reset.
Click to expand...
Click to collapse
Correct, it work all models EXCEPT SPRINT.
Sideload dont touch anything over sdcard but if you are in 4.1.2 base a wipe data / factory reset and a format sdcard its advised....
if i may ask, what is TugaPower?
is the second file really full stock?
hamdir said:
if i may ask, what is TugaPower?
Click to expand...
Click to collapse
Its my Nick Name over android
Here at XDA it was already taken by a guy that was pissed of at my home forum and because that over XDA i dont have this nickname.
http://www.androidpt.com/index.php?/forum/241-rom-tugapower/
Here at my home forum my nickname
danieldmm said:
Its my Nick Name over android
Here at XDA it was already taken by a guy that was pissed of at my home forum and because that over XDA i dont have this nickname.
http://www.androidpt.com/index.php?/forum/241-rom-tugapower/
Here at my home forum my nickname
Click to expand...
Click to collapse
so is the second zip file really full stock?
can i ask for a favor can someone provide the data stock apps like flashlight, calculator and the rest in separate zipfile?
i wiped and lost them
[RUU] [OTA] T-Mobile US Android 4.3 OTA (3.24.531.3) w/ Nandroid, Firmware & Radio
T-Mobile USA OTA to Android 4.3 Jelly Bean
Build: 3.24.531.3
Android 4.3, Sense 5.0
* includes Wi-Fi Calling​
This is the actual OTA Zip file that is downloaded and then flashed during the update process. I saw that T-Mobile's instructions tell users they must check through their phone, and are not providing a download link.
I extracted it off of my phone's SD Card before I updated, so it is untouched, it comes as T-Mobile distributed it.
DISCLAIMER
I am sharing this so everyone can have access to the official OTA. What you do with it from here is not my responsibility, nor do I care. Enjoy. I am not claiming ownership, nor am I claiming this will be much help by itself.
Update 10/23
The community has spoken, and this has brought a lot of stock options for the end user. As of 10/23 (today), we now have the OTA, a full Nandroid TWRP backup, two versions of the firmware, the radio only and now the RUU itself. The OP has been fully updated with links and credits to everything. Thank you to the Android community, this thread is a pretty great example of open source and people coming together with end products. Thanks for all the help here as well.
DOWNLOADS
RUU
3.24.531.3 T-Mobile RUU: http://forum.xda-developers.com/showthread.php?p=46756958
* thanks to Behold_this
OTA
*UPDATED 10/21 8PM*
My DropBox Link: https://db.tt/MWAGXkFc
Mirror Link: http://www.mediafire.com/?xjwbggpj5pw0l1l
* thanks to Mikey
NANDROIDS
TWRP Backup, No Root: http://forum.xda-developers.com/showpost.php?p=46695324&postcount=50
* thanks to Mikey
FIRMWARE
FIRMWARE (slim): http://forum.xda-developers.com/showpost.php?p=46691733&postcount=30
* does not include: boot.img, recovery.img or hboot.img
* thanks HTC_Phone
FIRMWARE + HBOOT: http://forum.xda-developers.com/showpost.php?p=46694631&postcount=43
* contains modded hboot without red warning text
* thanks to HTC_Phone
RADIO
RADIO: http://forum.xda-developers.com/showpost.php?p=46684321&postcount=339
* flashable radio only zip can be found here
* thanks to Mikey
Thanks for the link
Just removed the radio from this update and made it into a flashable zip........
http://forum.xda-developers.com/showpost.php?p=46684321&postcount=339
Mikey said:
Just removed the radio from this update and made it into a flashable zip........
http://forum.xda-developers.com/showpost.php?p=46684321&postcount=339
Click to expand...
Click to collapse
Any chance you can mirror the OTA? Dropbox terminated the OPs link
frettfreak said:
Any chance you can mirror the OTA? Dropbox terminated the OPs link
Click to expand...
Click to collapse
Uploading it now.......give me a couple minutes
TJD319 said:
T-Mobile USA OTA to Android 4.3 Jelly Bean
Build: 3.24.531.3
Android 4.3, Sense 5.0
* includes Wi-Fi Calling​
This is the actual OTA Zip file that is downloaded and then flashed during the update process. I saw that T-Mobile's instructions tell users they must check through their phone, and are not providing a download link. I am just sharing this with the community for developmental purposes. Hopefully, this may bring Wi-Fi Calling addons to ROMs like ViperOne and others I'm sure.
I extracted it off of my phone's SD Card before I updated, so it is untouched, it comes as T-Mobile distributed it.
DropBox Link: https://db.tt/MWAGXkFc
Click to expand...
Click to collapse
So after hours of searching through the forums, I just wanted to clarify a couple of questions.
I have S-Off and unlocked bootloader but Stock Rom - NOT rooted and stock recovery. I also have the original MID/CID - 0713000 / T-MOB010.
I can still get the latest OTA - 3.24.531.3? The only requirement for the OTA is CID/ MID, stock recovery and stock ROM, correct?
Also, If I go ahead update it, My HBOOT will be updated to 1.54 and Bootloader will be locked but I still will retain s-OFF, correct?
And the only way in future to flash a custom ROM is via, htcdev bootloader unlock?
Thank You!!
Mikey said:
Just removed the radio from this update and made it into a flashable zip........
http://forum.xda-developers.com/showpost.php?p=46684321&postcount=339
Click to expand...
Click to collapse
f_v_man said:
So after hours of searching through the forums, I just wanted to clarify a couple of questions.
I have S-Off and unlocked bootloader but Stock Rom - NOT rooted and stock recovery. I also have the original MID/CID - 0713000 / T-MOB010.
I can still get the latest OTA - 3.24.531.3? The only requirement for the OTA is CID/ MID, stock recovery and stock ROM, correct?
Also, If I go ahead update it, My HBOOT will be updated to 1.54 and Bootloader will be locked but I still will retain s-OFF, correct?
And the only way in future to flash a custom ROM is via, htcdev bootloader unlock?
Thank You!!
Click to expand...
Click to collapse
I am pretty sure you need to relock the bootloader, and have stock recovery. AFAIK those are the requirements. HBOOT may be 1.55 as that is the latest but you SHOULD still keep s-off. But i make no promises. lol But yes, you will have to go to HTCDEV and get your unlock key again if you wantt o flash another rom (its a really easy process though)
TJD319 said:
T-Mobile USA OTA to Android 4.3 Jelly Bean
Build: 3.24.531.3
Android 4.3, Sense 5.0
* includes Wi-Fi Calling​
This is the actual OTA Zip file that is downloaded and then flashed during the update process. I saw that T-Mobile's instructions tell users they must check through their phone, and are not providing a download link. I am just sharing this with the community for developmental purposes. Hopefully, this may bring Wi-Fi Calling addons to ROMs like ViperOne and others I'm sure.
I extracted it off of my phone's SD Card before I updated, so it is untouched, it comes as T-Mobile distributed it.
DropBox Link: https://db.tt/MWAGXkFc
Click to expand...
Click to collapse
Anyways to get a nandroid or to pull /system on an installed update.
I'm currently on a custom 4.2.2 ROM with Firmware 2.24.401.1, HBOOT 1.54, S-OFF, Super CID, and TWRP 2.6 bootloader on T-Mobile HTC One.
What is the process to upgrade to this OTA? Or is there a better to go to latest base, firmware, etc.?
Mikey said:
Uploading it now.......give me a couple minutes
Click to expand...
Click to collapse
Here you go
http://www.mediafire.com/download/xjwbggpj5pw0l1l/OTA_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3-1.27.531.11_release_337024c11bis4e2ha8yy5i.zip
I was on a rooted stock TMo ROM in order to get the update. However, i kept my Bootloader unlocked S-OFF, and I was rooted. Only thing really required is the stock odexed 4.1.2 ROM and the Stoxk boot and Recovery. SOFF doesnt matter, for me it didnt.
I was on Viper 4.2.2. I restored a nandroid of my stock 4.1.2 rooted, and all I then did was flash TMO stock recovery in fastboot.
Sent from my HTC One using XDA Premium 4 mobile app
TJD319 said:
I was on a rooted stock TMo ROM in order to get the update. However, i kept my Bootloader unlocked S-OFF, and I was rooted. Only thing really required is the stock odexed 4.1.2 ROM and the Stoxk boot and Recovery. SOFF doesnt matter, for me it didnt.
I was on Viper 4.2.2. I restored a nandroid of my stock 4.1.2 rooted, and all I then did was flash TMO stock recovery in fastboot.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The OTA doesn't help developers, they need the patched APK's after the OTA is installed.
SmiLey497 said:
The OTA doesn't help developers, they need the patched APK's after the OTA is installed.
Click to expand...
Click to collapse
I was answering someone's question about if they need the bootloader relocked or not.
As far as the devs go, now they've got the OTA and can do whatever they or anyone else wants with it. Its not really a crime to share.
Sent from my HTC One using XDA Premium 4 mobile app
Thanks for the upload. Question, to flash this, its just like flashing a firmware update, with the silver HTC on the screen? Pushed through ADB?
Rob
cvseuy said:
I'm currently on a custom 4.2.2 ROM with Firmware 2.24.401.1, HBOOT 1.54, S-OFF, Super CID, and TWRP 2.6 bootloader on T-Mobile HTC One.
What is the process to upgrade to this OTA? Or is there a better to go to latest base, firmware, etc.?
Click to expand...
Click to collapse
1. Restore nandroid backup for stock 4.1.2
2. Make sure boot.img and recovery.img are from stock T-Mobile.
3. Get OTA
OR
Download and install the stock T-Mobile ODEX ROM. Flash the ROM, doesnt matter if its rooted or not. Make sure it has stock recovery and boot images. And you can get OTA.
Sent from my HTC One using XDA Premium 4 mobile app
TJD319 said:
I was answering someone's question about if they need the bootloader relocked or not.
As far as the devs go, now they've got the OTA and can do whatever they or anyone else wants with it. Its not really a crime to share.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Said by a developer
"ota is just a patch, patches the existing files, with new code, there isn't a whole apk there. is useless unless you have a phone to apply patch on and then pull system"
that's why I was asking. No ROM can include stuff like Wi-Fi calling without the patched APK's.
i noticed this is a higher build number compared to the att 4.3 version
SmiLey497 said:
Said by a developer
"ota is just a patch, patches the existing files, with new code, there isn't a whole apk there. is useless unless you have a phone to apply patch on and then pull system"
that's why I was asking. No ROM can include stuff like Wi-Fi calling without the patched APK's.
Click to expand...
Click to collapse
Once again, i completely get this and for someone who wants to provide a full system dump would be great. But im not wiping yet, so i cant do that. Also, the OTA file contains an encrypted firmware.zip file which is completely independent of the patched apks. That's why Mikey posted the Radio. This is the whole reason I gave it to the community.
Anyway, im done. Im not trying to argue about some stupid OTA. If you don't want it, then don't download it.
Sent from my HTC One using XDA Premium 4 mobile app
So, I noticed a problem on 4.3 when trying to boot a recovery in fastboot. According to the following thread, Android 4.3 bootloader has changed the function of this fastboot command:
Code:
fastboot boot recovery_twrp.img
Reference URL of same solved issue on N4: http://forum.xda-developers.com/showthread.php?t=2380675
Now, we have to retrigger the command somehow inputting the right information in. When i ran the regular command, it says downloading ...OK and goes through the regular steps, but the phone hangs on the bootloader screen.
It never actually loads the custom recovery, just completely freezes the bootloader. I tried a couple different recoveries (CWM, TWRP) and they just don't do anything except lock up the phone.
I want to preserve my stock partitions and make a backup. I plan to go back to my 4.1.2 and perform the update, then load it and wipe so i can provide the stock nandroid backup for full throttle development. So if anyone knows the current command to boot a custom recovery in fastboot on 4.3, let me know.
Sent from my HTC One using XDA Premium 4 mobile app
TJD319 said:
So, I noticed a problem on 4.3 when trying to boot a recovery in fastboot. According to the following thread, Android 4.3 bootloader has changed the function of this fastboot command:
Code:
fastboot boot recovery_twrp.img
Reference URL of same solved issue on N4: http://forum.xda-developers.com/showthread.php?t=2380675
Now, we have to retrigger the command somehow inputting the right information in. When i ran the regular command, it says downloading ...OK and goes through the regular steps, but the phone hangs on the bootloader screen.
It never actually loads the custom recovery, just completely freezes the bootloader. I tried a couple different recoveries (CWM, TWRP) and they just don't do anything except lock up the phone.
I want to preserve my stock partitions and make a backup. I plan to go back to my 4.1.2 and perform the update, then load it and wipe so i can provide the stock nandroid backup for full throttle development. So if anyone knows the current command to boot a custom recovery in fastboot on 4.3, let me know.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You ran this one correct,
Code:
fastboot -c "lge.kcal=0|0|0|x" boot twrp.img
because that's the only solution I've seen so far, I'll try to look further.
Here is some candy for you guys
HTC ONE SV - Android 4.2.2 Sense 5 Rom for flashing in recovery.
I made k2u version from my backup/dump and k2ul version is made of a System Dump from russian k2ul (thanks to radarga for the dump).
I recommed TWRP recovery for flashing.
No root or Superuser inside!
This is a test version, time was to short to test everything, but it boots also on k2u and Wifi/Mobile data is working for me.
Download:
k2ul - LTE
k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip
mirror (dev-host):
k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip
k2u - Non LTE
k2u_4.2.2_3.11.401.106_stock_odexed_v1.zip
or mirror
k2u_4.2.2_3.11.401.106_stock_odexed_v1.zip
Deodexed Non-LTE version by coloured_chalk
k2u_4.2.2_3.11.401.106_DEODEXED
Installation:
Make backup and full wipe in recovery.
S-off, flash in recovery.
S-on, do the same. And unzip the boot.img from the k2ul_4.2.2_3.11.401.1_stock_odexed_v2.zip and flash with fastboot.
Don't forget to flash Superuser file (look into my index thread) if you want root!
Bugs:
- noisy sound in calls (without firmware files)
Thanks:
- to HTC for the update
- to radarga for the dump
- to bkcokota for fixing bluetooth
- to jmz for hosting
- to Seanie280672 for cwm backup
- to coloured_chalk for deodexed k2u version
Have fun.
Thank youuuuuuuuuuuuuuu!
This is a pure stock, right? That means nothing is modified or customized and everything is originally from htc?
I love you, man *_*
EDIT: ok, now I really can't wait for OTA to come! it's lovely!
alivevsdeath said:
This is a pure stock, right? That means nothing is modified or customized and everything is originally from htc?
Click to expand...
Click to collapse
Nothing modified. Only busybox files are added from radarga as i have seen now.
Notice: i can not guarantee that everything works like it should.
But it looks very promising
after update: I cannot hear the call - the speakers has problem - it's too noisy
my ussd code is Chinese
i hate Chinese, how to fix it ?
from my k2_ul
I seem to be having an issue with the phone crashing when I turn on bluetooth, can anyone replicate this issue or is it just me with it?
To those who have problems: I believe you guys should wait for the OTA to come. Maybe there are too many different types of the k2ul so you need the right update for exactly your k2ul type/serial number or something.
Malakaaa said:
To those who have problems: I believe you guys should wait for the OTA to come. Maybe there are too many different types of the k2ul so you need the right update for exactly your k2ul type/serial number or something.
Click to expand...
Click to collapse
Yes, thats right.
This is only for play around, until the update is here for all!
You guys must notice, that the firmware files from OTA are missing in this rom.
There is no new hboot, but new radio.img and other img files i don't know.
old.splatterhand said:
Yes, thats right.
This is only for play around, until the update is here for all!
You guys must notice, that the firmware files from OTA are missing in this rom.
There is no new hboot, but new radio.img and other img files i don't know.
Click to expand...
Click to collapse
Do you have a copy of the updated firmware folder that we can play around with too?
EDIT: nevermind, I found the system dump on 4pda, let's see what we can do to get things going here.
Ok, to everyone who is using this ROM and having issues like me (which I'm assuming is probably everyone). I've figured out why bluetooth wasn't working, system/etc/dbus.conf is missing from the zip, it's not splatterhands fault as it was missing from the system dump too, as such, if you want to get it working, copy dbus.conf into your system/etc folder and reboot.
old.splatterhand, can you please patch your zip file to include this file also?
Will do, when i'm back from work. Or i upload a new version of the rom with the file.
For your previous post:
Download the OTA update and extract firmware.zip. Boot.img is also from it.
You'll find link in my index thread.
Thanks @ckpv5 for posting the HTC server link!
Works fine with Bluetooth @ K2_U (non LTE)
On k2_ul optus aus
Speakers is too noisy and bluetooth is not working
Flashed, works like a charm. Also I have flashed the radio.img, boot.img from firmware.zip and attached the patch for bluetooth. Dunno where to flash the rest of the firmware files, so I'm not trying with those. For SuperSU I have followed the instructions given by TWRP 2.6.3.0. He showed me to install supersu, then after reboot in menu I clicked SuperSU Installer and clicked TWRP, which has downloaded the supersu files. Then the installer has rebooted the phone, finished the installation in TWRP automatically and rebooted again. And I had at the end the rooted Android 4.2.2 with Sense 5.0.
Bazdir said:
Flashed, works like a charm. Also I have flashed the radio.img, boot.img from firmware.zip and attached the patch for bluetooth. Dunno where to flash the rest of the firmware files, so I'm not trying with those. For SuperSU I have followed the instructions given by TWRP 2.6.3.0. He showed me to install supersu, then after reboot in menu I clicked SuperSU Installer and clicked TWRP, which has downloaded the supersu files. Then the installer has rebooted the phone, finished the installation in TWRP automatically and rebooted again. And I had at the end the rooted Android 4.2.2 with Sense 5.0.
Click to expand...
Click to collapse
Please tell me how to get and flash radio.img ?
rJiLz said:
Please tell me how to get and flash radio.img ?
Click to expand...
Click to collapse
Get the firmware.zip from the OTA package and replace /dev/block/mmcblk0p16 on your phone with the radio.img from the firmware.zip (this is assuming you have a k2_ul) all you need to do is rename the radio.img to mmcblk0p16 and it will be correct.
Is the network usage app crashing for anyone else too? I'm trying to see if anything else is having problems and that seems to be about the only one.
i've restored to saturn III and waiting for @old.splatterhand 's custom rom on android 4.2.2
This will not come so fast and it will not solve missing firmware files.
I have uploaded v2 with dbus.conf inside, so bluetooth should work now.
Those who didn't added the file manually can download the new version.
And no, i didn't fix the noisy call sound.
So sad...
But...update radio can fix chinese ussd code ?
Will be adding files as my work progresses today...
OTA zips
DO NOT USE these unless s-off and willing to risk needing to RUU.
Part 1 of 2
- https://www.androidfilehost.com/?fid=24438995911973175
Part 2 of 2
- https://www.androidfilehost.com/?fid=24438995911973228
Custom firmware zip that includes all M firmware and TWRP 3.0.0.1
Rename to 0P6BIMG.zip and flash via hboot or fastboot flash this zip. (htc_Fastboot oem rebootRUU then htc_fastboot flash zip m8MfirmwareTWRP3_0_0_1.zip)
- https://www.androidfilehost.com/?fid=24438995911973227
No boot or recovery custom firmware zip...
- https://www.androidfilehost.com/?fid=24438995911973412
RUU mode (sd or fastboot) flashable TWRP zip
- https://www.androidfilehost.com/?fid=24457741883933189
Stock Recovery IMG included with Marshmallow
- https://www.androidfilehost.com/?fid=24438995911973341
Stock unrooted nand (unzip, copy into TWRP/backups/serialnumberofphone/) Then install custom firmware zip...
- https://www.androidfilehost.com/?fid=24438995911973388
Custom s-off only RUU (includes TWRP, has amazon apps removed+htc speak+OTA updater removed)
Will wipe internal storage !
Flash either by renaming zip to 0P6BIMG.zip and flashing from ext sd via hboot -or- flash via fastboot manually
- https://www.androidfilehost.com/?fid=24438995911973442
Then simply flash supersu 2.65 attached to this post for root.
HTC version of fastboot (for those who like to flash manually USE THIS).
- https://www.androidfilehost.com/?fid=95784891001612150
Thank you for the quick work, I'm headed off to work or I would be attempting this now. Hopefully when I get back tonight I can update to MM with no problems. Thanks again for this
Possible to get the firmware w/o twrp? I'm running multirom.
Sent from my HTC One_M8 using Tapatalk
Are these incremental updates from 4.17.605.9 or can they be flashed clean? Thanks for getting this up so fast :good:
EDIT: I'm sure they're incremental. Time to RUU...
Just FYI, for anyone who doesn't have an external SD, make sure you don't try to use the Marshmallow recovery to install the update... It's missing the "Apply update from phone storage option". Flash the 5.0.1 recovery found in dottat's RUU, and you'll be able to apply it from the internal phone storage.
garywojdan81 said:
Possible to get the firmware w/o twrp? I'm running multirom.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24438995911973412
dante020 said:
Are these incremental updates from 4.17.605.9 or can they be flashed clean? Thanks for getting this up so fast :good:
EDIT: I'm sure they're incremental. Time to RUU...
Click to expand...
Click to collapse
Also posted a stock nand you can move into your backup folder and "restore" after flashing the custom firmware zip.
I havent done this in a while, but I am S-off and TWRP, do we start with the "Custom firmware zip that includes all M firmware and TWRP 3.0.0.1 " ? to keep twrp? Or start at the beginning and flash from there?
(I have downloaded all the files. Hoping for MM to work better then lollipop on my M8 before I throw it down the street.)
Used the custom firmware and flashed it through hboot.
Worked like a charm.
Thank you.
Now just need to remove that red text.
Sent from my HTC6525LVW using Tapatalk
Looks like there will be a little bit of debloating necessary in order to make our custom RUU. Also, since this one is meant for s-off users only i'm not going to include stock recovery. I will include TWRP. This will enable users to fix stuff remotely and be ready to flash immediately after.
I am tossing the OTA updater, the amazon crapware, htc speak.
My phone is S-OFF and Rooted with TWRP
How wud you suggest me to proceed with this MM update (files you posted)
My requirement - It should be rooted and no Bloatware at all.
Nitinsaraf said:
My phone is S-OFF and Rooted with TWRP
How wud you suggest me to proceed with this MM update (files you posted)
My requirement - It should be rooted and no Bloatware at all.
Click to expand...
Click to collapse
Do you mind if internal is wiped during the process? If so, you might like the RUU that i'm getting ready to upload
dottat said:
https://www.androidfilehost.com/?fid=24438995911973412
Click to expand...
Click to collapse
YOU ARE AWESOME!
Sent from my HTC One_M8 using Tapatalk
dottat said:
Do you mind if internal is wiped during the process? If so, you might like the RUU that i'm getting ready to upload
Click to expand...
Click to collapse
Dont need any Data so RUU must be fine for me but it should be rooted and no bloatware please.
Am i going to get that in your RUU ????
Nitinsaraf said:
Dont need any Data so RUU must be fine for me but it should be rooted and no bloatware please.
Am i going to get that in your RUU ????
Click to expand...
Click to collapse
It will be rooted, include the latest twrp, and have a good amount of bloaty crap ware removed.
Sent from my XT1575 using Tapatalk
dottat said:
It will be rooted, include the latest twrp, and have a good amount of bloaty crap ware removed.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Then I am waiting like never before (hope "Internet Pass Through" is there)
post it as soon as its ready.
Thanks in Advance
Nitinsaraf said:
Then I am waiting like never before (hope "Internet Pass Through" is there)
post it as soon as its ready.
Thanks in Advance
Click to expand...
Click to collapse
I'm waiting for mine to boot back up and then i can take a look. The RUU is posted in the OP.
dottat said:
It will be rooted, include the latest twrp, and have a good amount of bloaty crap ware removed.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Thanks for your work, dottat. Can't wait to give this a try.
Allright gang.. had to attach the supersu.zip to the OP... this new systemless root will probably take some playing with to make work on an RUU. Since the RUU itself includes TWRP, simply download the supersu.zip attached to the OP and flash it normally in TWRP.
And BTW, you guys got the new emoji.
dbrits said:
Thanks for your work, dottat. Can't wait to give this a try.
Click to expand...
Click to collapse
Downloaded, now tell me how should I install this (method/Command)
Also, if your phone is up now then does it has "Internet Pass through" ?