Hey i am currently running on ICS leak 2.i have experienced a quite annoying feature on my atrix2.the thing is everything's working great and touch is super responsive untill i connect it to my laptop.after which it becomes super laggy even non responsive at times(most times).
The same issue was observed in 2.3.5,2.3.6,ics leak 1 and now on leak 2.
And i have checked my cable.it is original motorola and had no such issue on my friends atrix2.i also tried another usb cable but to the same end.
Any guesses???
Thanks...
Btw i know there's a topic with this issue but that was limited to ics leak1 so i thought this would generalize it.sorry if this annoys anyone.
Sent from my MB865 using xda premium
Well i have the same problem since gb. And if i remove the laptop from charging, phone is perfect. But when connected to the laptop via usb, and its on charging there is a problem.
Motorola Atrix 2 (MB865 Asia retail on official ICS, unrooted)
chayan18885 said:
Well i have the same problem since gb. And if i remove the laptop from charging, phone is perfect. But when connected to the laptop via usb, and its on charging there is a problem.
Motorola Atrix 2 (MB865 Asia retail on official ICS, unrooted)
Click to expand...
Click to collapse
So any luck on the front???
Sent from my MB865 running on ICS Leak 2#
Well no luck with my laptop till now. But tried to use my phone on my friends laptop. Kept his on chargeing and then hooker my phone. And it worked perfectly fine. Till now i thought that there might be problem in my laptop and requires formatting. I'm nt gettng the time to format the laptop and install all the stuff back. So once i do it. I'll post the result here. One thing for sure is that its a wired problem...
Motorola Atrix 2 (MB865 Asia retail on ICS, unrooted)
---------- Post added at 09:54 AM ---------- Previous post was at 09:51 AM ----------
Ignore the typo error.. Is you laptop kept on charge when u connect ur phone? And try any other laptop as well. Or a desktop in that matter.
Motorola Atrix 2 (MB865 Asia retail on ICS, unrooted)
Yeah my lappy os always on charge.do you think that's causing these problems???
Sent from my MB865 running on ICS Leak 2#
your laptop probably isnt grounded properly
check your wall plug for ground connections
Edit: recended.
Sent from my MB865
souljaboy said:
your laptop probably isnt grounded properly
check your wall plug for ground connections
Click to expand...
Click to collapse
Yeah figured it was the charger of lappy which was faulty in giving ground connection.thanks...
Sent from my MB865 running on ICS Leak 2#
Well hv formated the laptop. And my house has been newly constructed. So shud not be a switch problm. But possible that our chargers have a fault.
Motorola Atrix 2 (MB865 Asia retail on ICS, rooted)
chayan18885 said:
Well hv formated the laptop. And my house has been newly constructed. So shud not be a switch problm. But possible that our chargers have a fault.
Motorola Atrix 2 (MB865 Asia retail on ICS, rooted)
Click to expand...
Click to collapse
I'm sure its the grounding problem try connecting ur phone to lappy without connecting ur lappy to charger i.e. on battery
Sent from my MB865 using xda premium
Hahahah, read my reply on oct 2. I am forced to work in that manner coz of this problm. Cannot charge laptop if need to work n phone. I guess i hv no sol as mine is a asus and it charger has only two pin. No earth pin. So i cant even replace the charger.
Motorola Atrix 2 (MB865 Asia retail on ICS, rooted)
Lol just read it dunno how i missed it the first time...
Sent from my MB865 using xda premium
Related
Just got my droid charge today (it wa a replacement for a revolution) for some reason when I connect the usb cord it just charges it doesnt ask if I want to use as usb or anything. is this an odd setting I am not used to?
Go into the notifications drop down. Change from charge only to usb mass storage.
Sent from my SCH-I510 using Tapatalk
Thats what I am used to doing on my old phone but this isnt even showing me the option
Go to the verizon website and redownload the drivers.
went to samung got drivers re installed still no go
ilovesoad said:
Go into the notifications drop down. Change from charge only to usb mass storage.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
lolwut thats in usb options in settings not the dropdown
i dont have anything in notifications and under settings usb it just says mass storage media player and ask on connection
You have a bad cable, I had this same problem.
Is there any difference in cables? I was wondering about that the cable I have is the one from my revolution they said to keep it and didnt send a new charger
jfl14609 said:
Is there any difference in cables? I was wondering about that the cable I have is the one from my revolution they said to keep it and didnt send a new charger
Click to expand...
Click to collapse
yeah you may need a new one, preferably the one that comes with the Charge though you're probably gonna have to buy it... I think the stock samsung cable that comes with the phone is the only one that reliably connects and transfers data
Man now i am going to have to wait to root haha
jfl14609 said:
Man now i am going to have to wait to root haha
Click to expand...
Click to collapse
know a friend with a newer samsung phone? borrow it, I think most newer samsung cables all work (I use one from my Fascinate and it works fine)
go figure verizon said its the same cord
So they said they are sending me a phone and a cord. the guy from verizon even said I have absolutely no idea why its not working everyone here is also confused. so they are sending me a new phone and cord. I am starting to lose trust in their certified devices this makes 5 phones in 2 weeks
Its not bad it's just not ment for that phone just like my fascinate wire Is loose when connected to my charge
Sent from my SCH-I510 using xda premium
I Googled the hell out of it and cannot find anything concrete to suggest whether or not it would work with the Atrix 2...anyone know for sure?
prozac4312 said:
I Googled the hell out of it and cannot find anything concrete to suggest whether or not it would work with the Atrix 2...anyone know for sure?
Click to expand...
Click to collapse
As it is, the original laptop dock is physically incompatible with the Atrix 2. The micro usb and hdmi plugs are inverted (individually turned 180 degrees).
If you look at posts 33 & 34 here, they've managed to adapt theirs to work with the Atrix 2.
i jsut got the original atrix lapdock today delivered, it was $50 brand new, it took me about 10 minutes to open the dock part and swap the direction, little annoyed that it wont do mirror mode, just stuck in webtop mode
I'm glad I read this before I bought one! The wonderful folks over at radio shack told me that it would/was compatible... I'm technologically savvy but I don't have the tools to do modifications as mentioned above...
Sent from my MB865 using XDA App
....at least I don't think I do. Without looking at the other thread mentioned, what tools were required if ya don't mind me asking?
Sent from my MB865 using XDA App
I can confirm inverting the plugs on the 4G lapdock works great with the Atrix 2 using [ROM] Supercharged Atrix V 4. Took about 20 mins to invert the plugs. Now I can sell my 4G!!
Iggys Pop said:
....at least I don't think I do. Without looking at the other thread mentioned, what tools were required if ya don't mind me asking?
Sent from my MB865 using XDA App
Click to expand...
Click to collapse
Small Jewelers Phillips and a Small Standard screw driver. I used the Phillips for all six screws and the small standard to pry open the case. Easy Breezy....
shanghei said:
i jsut got the original atrix lapdock today delivered, it was $50 brand new, it took me about 10 minutes to open the dock part and swap the direction, little annoyed that it wont do mirror mode, just stuck in webtop mode
Click to expand...
Click to collapse
too bad i reallly need this lapdock but the Amazon didnt send to my country..(MALAYSIA) sob..sob..
If anyone is still interested in the Atrix 4g lapdock, it's at radio shack for $20 +tax. I just got one (you may want to call around first to confirm they have one since it's only instore and not online). I converted it over to work with ours (really simple). Any questions, just ask or see the posts listed in this thread or in the Atrix 4g accessories forum. I only had to do 4 Philips screws (2 on the hinged dock part and then 2 holding the plugs in).
Sent from my MB865 using xda app-developers app
CapnPez said:
If anyone is still interested in the Atrix 4g lapdock, it's at radio shack for $20 +tax. I just got one (you may want to call around first to confirm they have one since it's only instore and not online). I converted it over to work with ours (really simple). Any questions, just ask or see the posts listed in this thread or in the Atrix 4g accessories forum. I only had to do 4 Philips screws (2 on the hinged dock part and then 2 holding the plugs in).
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Might add if you do the mod and get the "unsupported device" error just reboot phone phone while it is still docked.
From another post I replied to concerning same issue. I did the described mod and got the same error message everyone seems to get (unsupported device). After dinking around with it a few minutes I noticed that if I pressed the power button on the phone (while docked), as you would to lock it during normal use, the lap dock monitor would reactivate. So I rebooted the phone while it was still docked and once it powered back up it connects to lap dock perfectly. I have been using it problem free for several hours now. Hope this helps others!
Aimless Rambler said:
Might add if you do the mod and get the "unsupported device" error just reboot phone phone while it is still docked.
From another post I replied to concerning same issue. I did the described mod and got the same error message everyone seems to get (unsupported device). After dinking around with it a few minutes I noticed that if I pressed the power button on the phone (while docked), as you would to lock it during normal use, the lap dock monitor would reactivate. So I rebooted the phone while it was still docked and once it powered back up it connects to lap dock perfectly. I have been using it problem free for several hours now. Hope this helps others!
Click to expand...
Click to collapse
That's pretty cool. I just tried it as well and the error went away (all this time I knew it was there, but I just ignored it). Does it actually make a difference other than not seeing the error (i.e. does the performance or anything else improve)?
I have so far enjoyed my lapdock (it's even more enjoyable when you get it for $19.99 ). And even though it seems a bit slow at times, I have to remind myself that I'm running a laptop WITH MY PHONE.
Sent from my MB865 using xda app-developers app
CapnPez said:
That's pretty cool. I just tried it as well and the error went away (all this time I knew it was there, but I just ignored it). Does it actually make a difference other than not seeing the error (i.e. does the performance or anything else improve)?
I have so far enjoyed my lapdock (it's even more enjoyable when you get it for $19.99 ). And even though it seems a bit slow at times, I have to remind myself that I'm running a laptop WITH MY PHONE.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Not sure. I was getting another problem altogether right after the unsupported device message appeared. The Lapdock would go into screen saver mode just as the phone itself would seem to disconnect and light up (screen on phone unlocked). As soon as I pushed the power button on the phone, as you would to lock it during normal use, then the Lapdock monitor would be functional, but only for a few seconds. Once I rebooted while docked it fixed itself. Performance wise it seems fine, as fast as my daughters netbook as limited a that may be, but I can surf the web, take calls, send messages with no noticeable lag other than my own slow de-creped typing. I probably would've been fine too with an annoying error message if that's all that had been hindering me.
Hi everyone, I am new to flashing rom.
I have flashed [ROM][KANG][2012.02.14] CyanogenMod 7.2.0 Milestone XT720 and I found that when i connect my phone to my computer with a usb cable, nothing happened. I mean no charging, no access to the sd card.
May I ask how to work it out, please??
ringoc2010 said:
Hi everyone, I am new to flashing rom.
I have flashed [ROM][KANG][2012.02.14] CyanogenMod 7.2.0 Milestone XT720 and I found that when i connect my phone to my computer with a usb cable, nothing happened. I mean no charging, no access to the sd card.
May I ask how to work it out, please??
Click to expand...
Click to collapse
Unplug usb wire and then plug it a second time, it should work.
Zachary57 said:
Unplug usb wire and then plug it a second time, it should work.
Click to expand...
Click to collapse
oh...I just tried it for several times, but still......
Try another cable. If that doesn't work then the problem is the USB port on your PC
Sent from my Milestone XT720 using xda premium
TIMZOZO said:
Try another cable. If that doesn't work then the problem is the USB port on your PC
Sent from my Milestone XT720 using xda premium
Click to expand...
Click to collapse
It works now
Thanks a lot!!!
Have to plug in twice...
I had the same problem but i have to plug in my usb twice...is there a fix to this ?
I have the same problem sometimes also. I just disconnect and connect it again and it works. It does that on both my computer and the charger.
Fixed in last version.
FJFALCON: Thank you for that and also the incredible work you're doing.
Because of people like you, my once awful phone suddenly became amazing. I love showing off the new features on it to my friends.
Keep up the good work and many thanks.
Sent from my XT720 using xda premium
Still not working
Using CyanogenMod-7.2.0-MilestoneXT720-20120424-KANG-signed
USB still not working at all!!! Any help ?!
I tried all that's suggested, no luck.
Once connected to USB, then charging from power also stops working till reboot!
---------- Post added at 07:40 PM ---------- Previous post was at 07:08 PM ----------
Trying the latest now... will update after completing
Thanks.
Fixed in new build, not fully but shell and power working now fine.
Thanks fjfalcon
That's right... Charging and debugger works in 20120426 !
Hoping to a get a fix for storage access from you soon
A new problem...
WiFi MAC address got changed with this version, causing my router access control to fail!!!
kiran_sb said:
That's right... Charging and debugger works in 20120426 !
Hoping to a get a fix for storage access from you soon
A new problem...
WiFi MAC address got changed with this version, causing my router access control to fail!!!
Click to expand...
Click to collapse
Well, that kind'a your private problem =)
Maybe you are right!
But its fine with 24th April image and stock 2.1 UK rom!
- In 26th image, WiFi MAC ID keeps changing continuously
So was wondering if its really a h/w issue or the image has something wrong
thanks for supporting.
I will rebuild wlan driver so wait.
Great!
Thanks, fjfalcon.
06.05.2012 build fixes all issues, including storage access and WiFi MAC.
Great Work
Hello:
Thanks all the developers for your wonderful work. Installed the latest cm7 20120506 on XT720 and it feels completely different and much better phone now.
Everything seems to be working fine except I am not able to get wifi tethering working on this phone. I do not know if it is my phone only or is general problem.
I did some extensive reading for tethering and it was mentioned that it should run in infrastructure mode. or putting "dun" in apn etc. I even tried wifi tether app also. On this phone, I did not see two options "MSS clamping" and "Routing Fix" which seems to be critical.
As a last resort I tried bluetooth tethering and this seems to be working. I did the following
1: Install PdaNet 3.5 and FoxFi on XT720 for bluetooth tethering.
2. iPad: Pairing and connecting with XT720 immediately started working.
3. Galaxy s2: Installed Pdanet Tablet and connected to XT70:
I would appreciate your comments on getting wifi tethering to work with CM7 7.0 version
Once agains thanks to the developers.
Reboot on incoming call...
Has anyone else observed this ! Almost every alternate incoming call, it reboots.
Using 06-05-2012 image. Any help ?
Modakjay great idea for the wifi share, thanks.
Sent from my XT720 using xda premium
Magnetic sensor not working...
And now magnetic sensor is not functional! Any clues please - xt720 CM-20120506
None of the compass apps work.
Same with CM-20120617 !
Hi everyone, this is my first post requesting help.
My skyrocket charges with the usb port but wont connect. I tried a darkside wipe, format of system data cache emmc and reflashing many roms. I want to use odin and try to use stock.recovery and rom to see if it works. I enter download mode and it still wont connect. I reinstalled kies and still doesnt work. Its not my computer cause my t989 galaxy s2 connects and these two phones are nearly identical.
Running ics real thing 4.2 v9 cwm touch by realsk8tr
If possible, try another computer.
I have the same problem with mine. This is a new problem that just started a couple weeks ago. Mine seems to be a hardware problem since it won't recognize USB connection in CWM, Odin, the stock rom, or my current Sky ICS rom.
I'll flash back to stock and send it back for warranty repair once I get another phone to use. I have a contract renewal coming up in May, so I'll do something then (I bought this one off contract, so I have to send it to Samsung)
Its a real pain because I have to transfer everything wirelessly between to/from my laptop.
SnackCracker said:
I have the same problem with mine. This is a new problem that just started a couple weeks ago. Mine seems to be a hardware problem since it won't recognize USB connection in CWM, Odin, the stock rom, or my current Sky ICS rom.
I'll flash back to stock and send it back for warranty repair once I get another phone to use. I have a contract renewal coming up in May, so I'll do something then (I bought this one off contract, so I have to send it to Samsung)
Its a real pain because I have to transfer everything wirelessly between to/from my laptop.
Click to expand...
Click to collapse
It is a new problem that occured after using the ics leak. I cant believe there isnt a solution. Can you link me to a zip method that will return me to stock GB without the use of odin? And can i send my skyrocket in for warranty replacement? I never got insurance on it, i brought it in november from att nyc. This skyrocket also gets dev/block errors upon format. Any ideas guys?
FeRoCiiOuS said:
It is a new problem that occured after using the ics leak. I cant believe there isnt a solution. Can you link me to a zip method that will return me to stock GB without the use of odin? And can i send my skyrocket in for warranty replacement? I never got insurance on it, i brought it in november from att nyc. This skyrocket also gets dev/block errors upon format. Any ideas guys?
Click to expand...
Click to collapse
What radios have you flashed? Also did the problem just happen after a flash or appear out of nowhere?
Just for the heck of it try uninstalling kies, the drivers should stick. Sometimes that'll do the trick
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Mine happened while I was still stock/rooted. I had changed nothing for several weeks. It just stopped recognizing when it was connected to USB. I have tested on multiple computers and tested another sgs2 on my laptop. The problem is definitely with my phone. No other computers recognize my phone is connected, phone won't mount USB, etc. Yet other phones work fine when connecting to my laptop.
I even flashed back to stock GB 2.3.5 , etc. Its not an ICS issue since this happened prior to flashing ICS (it actually went tits up in March prior to the leak).
I have a GB 2.3.5 Nandroid backup I'll flash before sending it to Samsung.
Samsung warranty is good for one year. AT&T will only do a 30 day exchange type warranty. Anything after 30 days has to go back to Samsung repair.
My only concern is without a USB connection I can't flash to the stock recovery. I can flash to stock GB and unroot and clean it up on the ROM side, but it will still have CWM recovery. Oh well.
The way I see it this is definitely a hardware issue. Samsung should fix the hardware problem regardless of the recovery software.
SnackCracker said:
Mine happened while I was still stock/rooted. I had changed nothing for several weeks. It just stopped recognizing when it was connected to USB. I have tested on multiple computers and tested another sgs2 on my laptop. The problem is definitely with my phone. No other computers recognize my phone is connected, phone won't mount USB, etc. Yet other phones work fine when connecting to my laptop.
I even flashed back to stock GB 2.3.5 , etc. Its not an ICS issue since this happened prior to flashing ICS (it actually went tits up in March prior to the leak).
I have a GB 2.3.5 Nandroid backup I'll flash before sending it to Samsung.
Samsung warranty is good for one year. AT&T will only do a 30 day exchange type warranty. Anything after 30 days has to go back to Samsung repair.
My only concern is without a USB connection I can't flash to the stock recovery. I can flash to stock GB and unroot and clean it up on the ROM side, but it will still have CWM recovery. Oh well.
The way I see it this is definitely a hardware issue. Samsung should fix the hardware problem regardless of the recovery software.
Click to expand...
Click to collapse
Did you try a different cord? I had the same issues with my epic on sprint... Samsung had crappy USB cords at the time
Sent from my SAMSUNG-SGH-I727 using XDA
traumaj said:
Did you try a different cord? I had the same issues with my epic on sprint... Samsung had crappy USB cords at the time
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
I guess I should have stated I have tried about 6 different cords.... I am a Systems Admin, so I've tried all the obvious fixes. It just absolutely will not recognize a USB connection anymore. Also, none of the computers recognize that a USB device has been connected.
It's definitely something wrong with the USB on the device.
SnackCracker said:
I guess I should have stated I have tried about 6 different cords.... I am a Systems Admin, so I've tried all the obvious fixes. It just absolutely will not recognize a USB connection anymore. Also, none of the computers recognize that a USB device has been connected.
It's definitely something wrong with the USB on the device.
Click to expand...
Click to collapse
you're gonna have to send it to Samsung for repair then.
I did flash the note modem once maybe my efs is corrupt
No, it's not that. It's hardware. It's almost certainly a cold solder joint. Must be a bad batch of I727s out there, mine's doing the same thing.
Sunday, I had a 30 minute call. After, I noticed the phone would charge, but couldn't get the computer to see it as a USB device. Last night, after an hour long call, I tried it and it worked. Managed to get it into download mode, flashed the stock .tar with ODIN, and got back to stock. About five minutes after that it started failing again (charging but not connecting, etc).
I'm using my T989 as a charger. If you can find a way to charge the battery, what I'm testing now might work. [EDIT: I re-read the OP and you have a T989 as well so you're set!] I'll post back. I set up a call to a test number (909-390-1390 is a 1Khz continuous tone) and placed the phone on the back of my video card with the USB cable connected. If it connects, we'll know this works for heating the phone up enough to temporarily 'fix' the cold solder joint.
But my skyrocket charges perfectly, via wall charger and usb, i have no need to use a external charger
You may not have the same issue as I have. I will note that as mine degrades it'll start acting as though I'm repeatedly unplugging it (PC rapidly going through USB connect/disconnect cycles, etc), then it'll still show that it's charging although the PC no longer recognizes it, until finally it acts as though the USB does nothing at all. The hotter I get the phone, the longer each stage takes.
Im just concerned that cwm will bone you from Samsung. one crazy idea is force brick so it doesn't turn on at all if they can't see recovery then you can anyways claim power failure
Sent from my SAMSUNG-SGH-I727 using xda premium
Mobile Odin pro with stock recovery(flashes over cwm)? May just be crazy enough to work. Stock recovery tar is in the forum somewhere, I used it for my other skyrocket
Sent from my SAMSUNG-SGH-I727 using xda premium
mahausrath said:
Mobile Odin pro with stock recovery(flashes over cwm)? May just be crazy enough to work. Stock recovery tar is in the forum somewhere, I used it for my other skyrocket
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
How is that possible? I tried using mobile Odin and iT says my SR is not supported.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I read, I see, I understand
This is a good thread. My skyrocket is a used one from Texas. Won it on Ebay. Shipped out quick. Nice unit except it did exactly what I see described here.
It worked great the first day as a stock ice cream sandwich or whatever you call the ATT skyrocket software package Android 4.0 something. The USB hookup started getting flaky the more I used it, it would disconnect. It was unhooking, and I'd click to "copy files to PC" button again and again. It made rooting it a real challenge.
As if getting your arms around "Odin" wasn't intimidating enough...
I thought it might be from being jiggled, so when I was stashing the last of my downloads to flash CM9, I was careful to have it on a surface when I gently touched the screen and got all the files copied I wanted, and the phone, computer, and data cord left untouched, appeared to "work" ahead of the epic fail.
After I flashed the new CM9 from (wow thanks team chopsticks!) the USB is not recognized either in the skyrocket nor the computer, nothing. It shows charge, that's it.
I intend to get a USB reader for the microchip as a work-around. The phone screams. This is my second skyrocket and the new CyanogenMod 9 is the love I've been looking for. At last, a phone that can bring up a gallery full. My first skyrocket had trouble when the 32 GB microchip approached full. This one flips the 20 GB worth of pages full of folders up like nothing flat.
Also, interesting detail on this used Ebay phone... the first thing I noticed is you can't power it off. The seller shipped it with the battery removed. I tried plugging it in, leaving it unplugged, this i727 just will not power down. I do love the touchwiz recovery, and how you can select to reboot and then choose to boot into recovery. That part worked nicely and I am over all happy.
I know its late replay but I got solution!
I had same prob all i did was took toothpick stick it inside phone USB connector thing and pushed it little bit up and now it works perfectly FINE!
Yes the toothpick fix does work. Had the same problem with mine. Read about using the toothpick to fix this problem from a post back in December of last year. Don't pry up too much and break the toothpick off inside. A little twist is all it needed on mine. Noticed some dirt and grime came off on the toothpick. Maybe this helped clean it as well
Sent from my SGH-I727 using xda app-developers app
So I want to take the pictures off my phone and add some files to the sd card from my computer on my new S3.
I have installed the drivers (but not Kies) and when I plug in my phone, the phone beeps and starts charging but it doesn't show up on My Computer. On my old Rezound, I would get an option to charge only or data but it's not showing up on the S3.
Is there anything special I have to install for my computer to recognize the phone except for the drivers?
changed the cable, from my old one to the Samsung one and it now works
illyfilly said:
So I want to take the pictures off my phone and add some files to the sd card from my computer on my new S3.
I have installed the drivers (but not Kies) and when I plug in my phone, the phone beeps and starts charging but it doesn't show up on My Computer. On my old Rezound, I would get an option to charge only or data but it's not showing up on the S3.
Is there anything special I have to install for my computer to recognize the phone except for the drivers?
changed the cable, from my old one to the Samsung one and it now works
Click to expand...
Click to collapse
Does your kernel support USB fast charge? If so, it may be enabled.
Sent from my SCH-I535 using Tapatalk 2
If it's not the fast charging issue as mentioned above, its most likely your base OS. I was having mounting issues as well, especially on my Mac. The latest K1 JB leak fixed it. I believe the ICS HE release also fixes it.
bradys said:
If it's not the fast charging issue as mentioned above, its most likely your base OS. I was having mounting issues as well, especially on my Mac. The latest K1 JB leak fixed it. I believe the ICS HE release also fixes it.
Click to expand...
Click to collapse
Chyrux said:
Does your kernel support USB fast charge? If so, it may be enabled.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks guys but for some reason the phone didn't want to use my old micro usb cable.
Sent from my SCH-I535 using Tapatalk 2