Database Info

[[CWM]] ( Recovery v6.0.xxx ) For Micromax A89

How to install clockworkmod recovery:
Click to expand...
Click to collapse
SP Flash Tool method, root not required
Click to expand...
Click to collapse
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.1.5 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Very Easy & safe way to FLASH CWM RECOVERY in any Android Device
steps:->
1. Downlaod CWM recovery.img
2: download recovery manager from HERE now Copy CWM recovery.img in SD card, now install the recovery manager.apk normally
3. Now open the recovery manager app you recently installed.
4. Click on recovery in app menu.
5. There click on install recovery
6. Then click on the recovery image name of ‘recovery.img’
7. Let the app install the recovery. after it done a message will show.
current recovery : unrecognized…. just ignore it.
That’s all now you have installed your recovery
Click to expand...
Click to collapse
Some SS Tutorials for how to flash CWMR using SP Flash Tools
Click to expand...
Click to collapse
Check here all steps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
New & Latest Released CWMR 6.0.2.8 is now available for Micromax A89 Ported by ME
Click to expand...
Click to collapse
Here is The New Version of CWMR 6.0.2.8
Click to expand...
Click to collapse
Change Logs
Click to expand...
Click to collapse
Partition SD Card Option Added in Advance Menu
Install Zip From Sideload option added in Main menu
Backup & Restore Backup from Internal & Externel SD is now Available
Click to expand...
Click to collapse
Credit : -
bgcngm
yuweng
Cygwin
Me
dont say Thanks Hit
if you can
Click to expand...
Click to collapse

Sorry i dont have Installed DDMS in my newly formated PC thats why Take % Post Screenshots using My A90s
here are Proof this is working fine i personally Tested...

How to install clockworkmod recovery:
....
...
..
...
Credits goes to Cygwin Kitchen + ME
Click to expand...
Click to collapse
WTF! all you can shove your credit up your ass dude! although i am thankful to you but stealing someone else's credit isn't fair!
mujhe pata he ki ye indians ki gandi aadat he par yaar tum jese logo ke karan hi to hamari bejjezti hoti he.. sudhar jao!!
Click to expand...
Click to collapse
comeon dude! behave!
btw thanx! :laugh:

Your Welcome dude.............
I give credit Cygwin cuz i unpack stock recovery for system mount points thats why i give credits...........also i give credit to me cuz i port that Recovery for A89 Device lol............. btwn thanks for your Advice.....sudhar ne ki kosish jarur karenge.......

i am unable to install drivers...what should i do....i am using windows 8..

piyushverma said:
i am unable to install drivers...what should i do....i am using windows 8..
Click to expand...
Click to collapse
For Installing Driver just Run that exe file if you are in Win 8 then try this
Right Click on file and Run As Administer then finish instillation and Reboot PC then connect your device.....

it still does not work...can u make a flashable zip fr it??

piyushverma said:
it still does not work...can u make a flashable zip fr it??
Click to expand...
Click to collapse
Dude, that just means that drivers aren't compatible with Win8, just use your friends pc or other pc with xp/7, you can install TWRP which is touch friendly (same as cwm) here

its work
its work ..... thanx...

yes it worked on xp....thanx for help....:victory:

Hi Bhardik
I posted this news here. I ended up using one of your screenshots without your permission because I was in a hurry. I hope you have no problem with that. :cyclops: http://www.droidiser.com/2013/02/install-clokcworkmod-recovery-micromax-a89.html

Re: [[CWM]] ( Recovery v6.0.1.5 ) For Micromax A89
droidiser said:
Hi Bhardik
I posted this news here. I ended up using one of your screenshots without your permission because I was in a hurry. I hope you have no problem with that. :cyclops: http://www.droidiser.com/2013/02/install-clokcworkmod-recovery-micromax-a89.html
Click to expand...
Click to collapse
No need to ask me for permissions cuz here I am only try my best to help &provide something good or new to other memmbers ...its all right even u no need to ask me for my any work u post where u want I don't mind it any more
Sent from my A90 using xda premium

Micromax a89 CMW recovery problem
its not working in xp ............
and can u specify the time required for process to complete .....
The progression bar is not showing atleast 1% after the 10 min.......
can u make tke video of it.......
Must Reply I m in a very serrious problem m,,

You missed this step
BHARDIK said:
1. Download MTK6577 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download CWM Recovery v6.0.1.5 + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6577_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Click to expand...
Click to collapse
Click on Recovery and browse to the CWM_6.0.1.5_recovery file in the A89 CWM folder Please insert this line between 5th and 6th step. Name this step as 5.1

hafeezluqman said:
Click on Recovery and browse to the CWM_6.0.1.5_recovery file in the A89 CWM folder Please insert this line between 5th and 6th step. Name this step as 5.1
Click to expand...
Click to collapse
Check OP Post 1
Tutorials posted with ScreenShots
How to flash CWMR Using Sp Flash Tools
Hope now every user can understand better.........
Thanks
BR
Hardy Ahir

TheMaker01 said:
its not working in xp ............
and can u specify the time required for process to complete .....
The progression bar is not showing atleast 1% after the 10 min.......
can u make tke video of it.......
Must Reply I m in a very serrious problem m,,
Click to expand...
Click to collapse
Check OP post 1
there u see tutorials with screenshots its also working on Windows XP Sp2 and Win7 tested by me in both OS
Try and follow all steps again hope u done.........
Good Luck

Thanks a Lot to Bhardik
U r just Awesome !!!!!!!!!!!!!!!!!!!!!!!!!!!
And once Again Tankssssssssssssss A lottttttttttttttttttttt

if you are rooted , u can use this app (mobile uncle tools) in fone ,
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
to install any recovery u want , without need of a pc ..there is no need to undergo the complicated spflashtool method...
all thanks to the devs for coming up with cwm and twrp for this device

MTK uncle tools
mmxa110user said:
if you are rooted , u can use this app (mobile uncle tools) in fone ,
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&hl=en
to install any recovery u want , without need of a pc ..there is no need to undergo the complicated spflashtool method...
all thanks to the devs for coming up with cwm and twrp for this device
Click to expand...
Click to collapse
U should know that the s/w that u recommended is not working in MICROMAX A 89 i.e (mobile uncle tools)
I m Telling u that bcoz i tried it by myself in my MICROMAX A89!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!http://forum.xda-developers.com/images/smilies/silly.gif

TheMaker01 said:
U should know that the s/w that u recommended is not working in MICROMAX A 89 i.e (mobile uncle tools)
I m Telling u that bcoz i tried it by myself in my MICROMAX A89!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!http://forum.xda-developers.com/images/smilies/silly.gif
Click to expand...
Click to collapse
yes u r right m. Uncle tools not working for me in my A89 /A90 and my A90S.... thats why i recommended sp flash tool methods its working fine without any problems......
Hardy
Sent from my A90 using xda premium

The complete solution to repair dead boot and unbrick and update LG P920 O3D

The complete solution to repair dead boot and unbrick and update & root LG P920 O3D to Android 4.0.4 without any problems with the official Rom ICS{ all fix}full 3D and camera work perfect all the most languages support.
Before anything make sure that all LG Drivers and everything Installed and run under Windows 7 ultimate and disable user account control settings don't run under Windows 8
LG Drivers https://docs.google.com/file/d/0Bwirw62bfRfebUNQNjJzUHlNbHM/edit?usp=sharing
First, download the following files:
1- flash fastboot and Replace the original boot and download mode http://www.mediafire.com/download/b...for_optimus-v1.22+modified+by+XcachorroX®.rar
or
https://drive.google.com/file/d/0Bwirw62bfRfeY2hsY3JRTDIybTQ/edit?usp=sharing
2- download Rom https://drive.google.com/file/d/0Bwirw62bfRfeM0dXbUVpcmNUOEU/edit?usp=sharing
3- download SmartFlashTool-3D to flash rom by fls and bin file https://docs.google.com/file/d/0Bwirw62bfRfeY0hKNjlqZFRSdUU/edit?usp=sharing
Second
Instructions:
After downloading the files previous
1- flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}View attachment 2067365
After driver installation ends remove usb cable
Run start_fastboot.bat and select option 2
Pull out battery
when is waiting for omap44 connect usb cable to your phone he start .
then insert battery to your phone when is waiting5 Seconds and follow the instructions on screen after this you see logo LG Gray
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in phone and He asks you entered fastboot Answer no and accept to flash and Replace the x-loader and u-boot source then inter to download mood and flash .
If the LG COSMO appears in device manager install driver for her by select update driver then select browse my computer for driver {install driver Manual} and select Install driver from "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) then try again step 2 flash fastboot .
Another method to flash fastboot {Flash Wkpark boot loader +cwm normal recovery } use this tool and and follow the instructions on the screen https://docs.google.com/file/d/0Bwirw62bfRfeUWw0QU5jRVV4UlU/edit?usp=sharing
A Small Guide if Anyone has troubles installing Omap4430 Driver in Windows 7
arsen4oo said:
When plugging the phone in,find OMAP4430 in "Other Devices" in Device Manager.
Right click on OMAP4430,then click "Update Driver Software..."
Then browse to your omap4boot 1.8 folder that you have extracted from zip
Choose the usb_drv_windows folder and click OK
While installing the driver,ignore any warning messages
After installation finished you will be able to ressurect your phone
Good Luck!
Click to expand...
Click to collapse
2-flash Rom:
Connect phone usb with pc and Enter in download modeView attachment 2067367
Enter in download mode : Pull out battery then Hold Vol+ then connect usb cable to your phone then insert battery to your phone with Hold Vol+ .
run SmartFlashTool-3D and select mode Rom copy D/L and in destination binary file select CP.fls file in CP bin and select AP.bin file in AP bin from extract rom folder Then press Start .
After flash rom If the screen appears encryption unsuccessful
Make hard reset for phone by turn off phone then press hold down volume and power button and Make hard reset for phone.then restart phone.
Root:
Follow this method http://forum.xda-developers.com/showthread.php?t=2366916
1. Download This Drives and Install Them Both
2. Download This Root and Than Extract The Zip and Install The Root Program
3-A. In Your Phone Go To Settings -- Security And Enable Unknown sources
3-B. In Your Phone Go To Settings -- Developer options And Enable USB debugging
4. Connect your Phone To PC using Cable and Than Open The Root Program and Wait until u see your Device Name.
5. Your Phone Well Auto Reboot after Complete
6. Done
Install CWM & TRWP recovery mood :
install this as normal application and run after root your phone
https://docs.google.com/file/d/0Bwirw62bfRfeb2JPbEhKTXQ2OEE/edit?usp=sharing
FM Radio:
https://docs.google.com/file/d/0Bwirw62bfRfeX1BMWGFvMDVzSEk/edit?usp=sharing
extract then put FM Radio for ics 4.0.4 Lgp920.zip in external sd card then flash it by inter cwm mood recovery then choose install from sdcard then choose zip from sdcard then choose FM Radio for ics 4.0.4 Lgp920.zip
that's all after root phone and install cwm mood recovery.
Thank you for all
have a nice time

Where is the difference of this one:
http://forum.xda-developers.com/showthread.php?t=2246001
Sent from my LG-P920 using xda app-developers app

Difference in that it is easier with ROM no one touched and stable
p-vlad said:
Where is the difference of this one:
http://forum.xda-developers.com/showthread.php?t=2246001
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
I tried many ways to update my phone but I have a problems in camera ... etc.
Until my phone died and I found a way to reach a stable rom without problems and succeeded
Difference in that it is easier with ROM no one touched and stable
Thank you for your interest

GrMo Hady said:
I tried many ways to update my phone but I have a problems in camera ... etc.
Until my phone died and I found a way to reach a stable rom without problems and succeeded
Difference in that it is easier with ROM no one touched and stable
Thank you for your interest
Click to expand...
Click to collapse
This slight difference doesn't make it worthy a new thread.
This is called copying, it's 99% the same.
+ It's not clear and organized for an "easy" tutorial.

GrMo Hady said:
I tried many ways to update my phone but I have a problems in camera ... etc.
Until my phone died and I found a way to reach a stable rom without problems and succeeded
Difference in that it is easier with ROM no one touched and stable
Thank you for your interest
Click to expand...
Click to collapse
Well... As I said already to Karim Kahale before. SmartFlash make more problems than good stuff. I know that LGFlashTools is a bit more complicated but it do much better and clean job. Take a look here. Your threat is the same like Karim Kahale one just with another bin file. You have not opportunity to use large partition, the rom is not Rooted, 90% of the cases you end up with lost IMEI... so you end up with much more work to do.

this topic for a realistic experience
p-vlad said:
Well... As I said already to Karim Kahale before. SmartFlash make more problems than good stuff. I know that LGFlashTools is a bit more complicated but it do much better and clean job. Take a look here. Your threat is the same like Karim Kahale one just with another bin file. You have not opportunity to use large partition, the rom is not Rooted, 90% of the cases you end up with lost IMEI... so you end up with much more work to do.
Click to expand...
Click to collapse
Karim Kahale said:
This slight difference doesn't make it worthy a new thread.
This is called copying, it's 99% the same.
+ It's not clear and organized for an "easy" tutorial.
Click to expand...
Click to collapse
this topic for a realistic experience My Phone works very well and I m not lost my IMEI Tested frequently and successfully.
I do not care if he was in another similarity with the theme is normal to use the same tools
Of course these official rom not touched one of which is for anyone who wants to update and repair only.
All I want that permeated the interest of all
Thank you generally

thanks for this guide it helped me when Lg flash tool diden't work

+1 , I flashed twice with LG Support Tool, but this method is working and my SU760 is alive again.
Thank's!

thanks
sioxz said:
thanks for this guide it helped me when Lg flash tool diden't work
Click to expand...
Click to collapse
thanks

jorrddan said:
+1 , I flashed twice with LG Support Tool, but this method is working and my SU760 is alive again.
Thank's!
Click to expand...
Click to collapse
Thanks)

GrMo Hady said:
Thanks)
Click to expand...
Click to collapse

thanks this saved my day

Install drivers for canvas 2

Many people decides to root canvas 2 but are unable to root due lack of drivers on their pc.So today i decided to describe how to install drivers for canvas 2.
You have to install these drivers on ur pc so that it is detected when u connect it in sp flash tools.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.turn on usb debugging in ur phone and connect it with pc and enable usb mass storage.
2.u will find a drive which includes only drivers for ur pc.
3.install them.install ×86 if u have a 32 bit windows or ×64 if u have a 64 bit windows.
4.now disconnect ur fone and switch it off.remove the battery and reinsert it but do not switch on.now connect it with ur pc via data cable.
5.wait for 4 to 5 mins. During this time u will find that some drivers are automatically installing in ur pc.
6.then switch on ur fone(do not disconnect it from pc)
7.download and install the following drivers on ur pc---::
VCOM DRIVERS
MTK DRIVERS
CYNUS T2 DRIVERS
8.now right click on the computer icon snd select properties to open system properties.
9.click on device manager(on the left).if ur device is listed under adb devices then u have successfully install drivers. But if it is listed with a yellow sign under unknown devices then right click on it. Select update drivers and locate to the folder c/program files/micromax
10.this folder includes drivers and that will be installed.
BY PERFORMING ALL THESE STEPS U WILL BE ABLE TO SUCCESSFULLY INSTALL DRIVERS ON UR PC.
but still if sp flash tools is nt detecting ur fone then download pdanet and install it.CLICK HERE TO DOWNLOAD
If still the problem persists then download moborobo pc suite from HERE and click on install drivers.....
If still u r unable to install proper drivers then just bang ur head in nearby wall cuz i have included almost all the possible ways of installing drivers.... but in case of any failure u can still use META MOD as an reserve way.
TO GO INTO META MOD JUST REMOVE UR BATTERY AND CONNECT UR PHONE WITH PC WHILE HOLDIND VOLUME UP BUTTON. (thx to dark4droid for idea of meta mod)
HIT THX IF I HELPED..:thumbup:

vrom ????
what is ??
tell me
Sent from my Micromax A110 using xda premium

These are drivers of about 1 mb only u need to install and den u will be able to downgrade...
Rest i have given all d details and link in my post only..
Read it and if u dont understand any step u can freely ask me..
After doing all these steps prpperly u will be be able to downgrade or root ur fone...vtever u want.:thumbup:
hit thx if i helped...

Anas6538 said:
vrom ????
what is ??
tell me
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Incase u still fails to install these drivers properly den i have 2 more ways which can be a way...bt till now just follow these only.
U will be getting success. I dont wanna confuse u by telling alternate methods also..
hit thx if i helped...

to mere download kar na padega vcom k chalega ..
mene drivesr to download kar lie he
Sent from my Micromax A110 using xda premium

U have to follow all the steps as in the post of installing drivers..still if u dont understand any step or 'incase' it failed to help u den comment me i have 2 additional methods also
hit thx if i helped...

Thanks

Thanks it helped

Dont u all think writing thx takes more time than clicking the thx button??

In windows8 it will work??
Above listed steps will work with windows8 64bit machine?? I just heard there are some driver signature issue with windos8!!!
Please reply!

Hey guys let me first clear up this doubt that all these rooting related procedures have no issues with windows 8..
I can bet it cuz I m using windows8 from about last 10 months and have not received any error yet..

when i install step3 drivers.. it says device driver NOT successfully installed!!! what to do

Which window are u using?
32 bit or 64 bit..
It sometimes are installed automatically..
Just go to c/program files and see wether it has a folder named micromax.

thnx
[email protected] said:
Many people decides to root canvas 2 but are unable to root due lack of drivers on their pc.So today i decided to describe how to install drivers for canvas 2.
You have to install these drivers on ur pc so that it is detected when u connect it in sp flash tools.
1.turn on usb debugging in ur fone and connect it with pc and enable usb mass storage.
2.u will find a drive which includes only drivers for ur pc.
3.install them.install ×86 if u have a 32 bit windows or ×64 if u have a 64 bit windows.
4.now disconnect ur fone and switch it off.remove the battery and reinsert it but do not switch on.now connect it with ur pc via data cable.
5.wait for 4 to 5 mins. During this time u will find that some drivers are automatically installing in ur pc.
6.then switch on ur fone(do not disconnect it from pc)
7.download and install the following drivers on ur pc.
VCOM DRIVERS
LINK: http://db.tt/ZKY7S9hw
MTK DRIVERS
LINK: http://db.tt/pQY576b7
CYNUS T2 DRIVERS
LINK: http://db.tt/oDLxs839
8.now right click on the computer icon snd select properties to open system properties.
9.click on device manager(on the left).if ur device is listed under adb devices then u have successfully install drivers. But if it is listed with a yellow sign under unknown devices then right click on it. Select update drivers and locate to the folder c/program files/micromax
10.this folder includes drivers and that will be installed.
BY PERFORMING ALL THESE STEPS U WILL BE ABLE TO SUCCESSFULLY INSTALL DRIVERS ON UR PC.
but still if sp flash tools is nt detecting ur fone then download pdanet and install it.
Link(pdanet): pdanet.co/bin/PdaNetZ350.exe
If still the problem persists then download moborobo pc suite and click on install drivers...
Link(moborobo pc suite):download.moborobo.com/download/Client/Moborobo(Moborobo_En_official).exe
:thumbup:
If still u r unable to install proper drivers then just bang ur head in nearby wall cuz i have included almost all the possible ways of installing drivers.... but in case of any failure u can still use META MOD as an reserve way.
TO GO INTO META MOD JUST REMOVE UR BATTERY AND CONNECT UR FONE WID PC WHILE HOLDIND VOLUME UP BUTTON. (thx to dark4droid for idea of meta mod)
HIT THX IF I HELPED..:thumbup:
Click to expand...
Click to collapse
Thnx

Thx a lot man......
The post is very useful. Successfully installed drivers.

thanks.

drivers not installing on my pc
hey can you help me drivers are not installing in my pc.?
It says device driver software was not succesfully installed(in notification area of startmenu)

Install both mtk & cynus t2 drivers...will surely work....:thumbup:
Sent from my Micromax A110 using Tapatalk 2

Nimish22 said:
hey can you help me drivers are not installing in my pc.?
It says device driver software was not succesfully installed(in notification area of startmenu)
Click to expand...
Click to collapse
Please explain your problem in detail.
At which step are you receiving this error??

it,s CHARGING at step 4
at step 4 it is only Charging not installing files.my sysytem type is x86

[Q] sp flash tool and bin4ry..31 not working helpp

sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help

Sp flash tools have got no issues with window 8.
My friend also once faced the same issue and this is simply because of improper drivers installed.
Simply uninstall the drivers that are installed in your pc and then re-install using THIS THREAD ..:thumbup:

nt wrkng
hey sir thnkz for that thred
bt i wanna tl u that it is not first time that i root my canvas 2
it was breaked....
now it is updated with 4.1.1
i liku your rom bt m not able to install it
in ur thred in 5th step
at dubng when i remove battery and reanter it and at connect AT THAT TIME THERE IS A CONNECT TONE AND BEFORE SHOWING CHARGING THERE IS DISCONNECT TONE
i hate to wated 10-15 min. bt there are no driver install
bt now i hvn't disconnect my phone
and install all that 3 drivers
now in devis manager
there is this option
OTHER DEVICE > UNKNOWN DEVICE (yello)
no names of my my phone and not other....
what can i do
there is no name in in device manager
after switch off it is rendomly connect and disconnect in evry 2 seconds
i have done all ur processes step by steb
bt not working
any solution plzzzz
help

mynk28s said:
hey sir thnkz for that thred
bt i wanna tl u that it is not first time that i root my canvas 2
it was breaked....
now it is updated with 4.1.1
i liku your rom bt m not able to install it
in ur thred in 5th step
at dubng when i remove battery and reanter it and at connect AT THAT TIME THERE IS A CONNECT TONE AND BEFORE SHOWING CHARGING THERE IS DISCONNECT TONE
i hate to wated 10-15 min. bt there are no driver install
bt now i hvn't disconnect my phone
and install all that 3 drivers
now in devis manager
there is this option
OTHER DEVICE > UNKNOWN DEVICE (yello)
no names of my my phone and not other....
what can i do
there is no name in in device manager
after switch off it is rendomly connect and disconnect in evry 2 seconds
i have done all ur processes step by steb
bt not working
any solution plzzzz
help
Click to expand...
Click to collapse
FIRST HAVE YOU UN-INSTALLED ALL THOSE DRIVERS THAT ARE PREVIOUSLY INSTALLED IN YOUR PC?
AFTER UN-INSTALLING FOLLOW THE STEPS MENTIONED IN THAT THREAD.
AND SECOND...IF IN 5th STEP NO DRIVERS ARE BEING INSTALLED THEN SIMPLY JUMP TO 6th STEP.
OH YES...I FORGOT..
SIMPLY CONNECT YOUR PHONE IN SWITCH OF MODE AND PRESS AND HOLD THE VOLUME UP BUTTON.THIS WAY YOU WILL GET INTO META-MOD AND SP FLASH TOOLS WILL DETECT YOUR PHONE AND YOU WILL BE ABLE TO FLASH RECOVERY.
AND AS THIS PROBLEM IS RELATED TO DRIVERS ONLY.....IT IS SUPPOSED TO BE DISCUSSED IN THAT THREAD AND I DON'T THINK THERE IS A NEED FOR A SEPARATE THREAD. .......so it will be better to discuss in that thread and close this one.
hitting thanks is not charged by xda...so wanna try how it feels??

sir
mtk driver has no way to install
and no effect of volume up
as before

mynk28s said:
sir
mtk driver has no way to install
and no effect of volume up
as before
Click to expand...
Click to collapse
Sorry didn't got you : that mtk drivers has no way to install.
Simply download and install these-:
download and install the following drivers on ur pc.
VCOM DRIVERS
LINK: http://db.tt/ZKY7S9hw
MTK DRIVERS
LINK: http://db.tt/pQY576b7
CYNUS T2 DRIVERS
LINK: http://db.tt/oDLxs839
And then.. click on device manager(on the left).if ur device is listed under adb devices then u have successfully install drivers. But if it is listed with a yellow sign under unknown devices then right click on it. Select update drivers and locate to the folder c/program files/micromax
this folder includes drivers and that will be installed.
HOPE THIS TIME IT HELPS YOU.
don't mind..... i don't know why but i am thinking that you are going somewhere wrong.
Because that meta-mod should have worked.
But also there can be a hardware problem (though it's chances are very less)... So still to check that change your usb driver and also usb port.

mynk28s said:
sir
mtk driver has no way to install
and no effect of volume up
as before
Click to expand...
Click to collapse
well faced these issues too
if u are really out of all ur attempts
install team viewer and PM me your id , ill try to help ur cause

please provide me a backup file created by stock recovery
Hey sir
I rqst to u that can u provide me a rooted backup for stock recovera
It will aprox 126mb after backup by stock recovery
Nd it is the biggest solution for root without computer or other process just restore from stock recovery
Will u provide me a rooted backup please
Please
I'm wating
Please
After that i will install cwm recovery by mtk tool
Bt plz provide me a rooted backup

please provide me a backup file created by stock recovery
[/attach]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mynk28s said:
hey sir
i rqst to u that can u provide me a rooted backup for stock recovera
it will aprox 126mb after backup by stock recovery
nd it is the biggest solution for root without computer or other process just restore from stock recovery
will u provide me a rooted backup please
please
i'm wating
please
after that i will install cwm recovery by mtk tool
bt plz provide me a rooted backup
Click to expand...
Click to collapse

mynk28s said:
sir
mtk driver has no way to install
and no effect of volume up
as before
Click to expand...
Click to collapse
Create a new windows user with admin privileges and connect the phone and install drivers. After drivers are installed please use spflash tool. It will work.
Sent from my Micromax A116 using xda premium

okay, first thing you need to do to install vcom drivers is to disable the mandatory digital signature enforcement in windows 8.
(Yeah this is a stupid thing msft started with windows 8, the VCOM drivers are not digitally signed so windows won't install even if you have admin rights.)
Step 1. Go to the right bottom corner of the desktop and wait for the side menu to appear. When it’s there click on the gear icon with the title “Settings”.
Step 2. Now click on the entry “More PC Settings”, then click on the entry “General”.
Step 4. Scroll down to “Restart now” (under “Advanced start up ”) and click it.
Step 5. Wait a bit for a menu.
Step 6. Now click “Troubleshoot”, then “Advanced Options” and after that click “Windows Start up Settings”.
Disable the digital signature enforcement and boot onto windows.
To install vcom drivers, right click the file(64bit or 32 bit) and select install.
As for the bin4ry tool, it doesn't work on jellybean for rooting. You need to install custom recovery and flash the supersu zip file.
Hope it helps.

mynk28s said:
sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help
Click to expand...
Click to collapse
buddy if it is jb 4.1.1 it is to be rooted with cwm mode.....u hav to install cwm through sp tools
n install super su

sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help
Click to expand...
Click to collapse
hey dude check out this vid for rooting: https://www.youtube.com/watch?v=vbIMvSFUqKM

mynk28s said:
sir
I have problem with my canvas 2
it is jb updated and i wanna root my canvas2
there is an problem with sp flash tool and bin4ry.31
I'm using win.8 64bit and i have already install all drivers using pdanet and mmx a110 driver setup
and dubbing is on
bt whenever i connect my mobile at switch off confition or after remove battery
there is connect and disconnect tone again and again
so i sp flash tool and others are not working at switch off condition...
what can i do????
help
Click to expand...
Click to collapse
i too faced same problem and it is because of improper drivers for 64bit windows8.i tried almost all deivers listed in xda but not succeed so i suggest my friend avoid Windows8 64bit and try different windows operating system & i am 101% sure you will succeed.:fingers-crossed:
Hit thanks only if you Succeed:angel:

drivers are installed bt again rendomly disconnect at switch off
hey sir
I had to tried the process in windows xp
and i had sucessfully installed drivers in pc
and my mobile is also shows in adb devices
bt again there is same problem that at switchoff condition and at remove battery it is rendomly connect and disconnect bt i had installed all drivers
now what is problem with my phone
again sp n bin4ry not working
hlp brooooooooooooooo

again after installed drivers
hey sir
I had to tried the process in windows xp
and i had sucessfully installed drivers in pc
and my mobile is also shows in adb devices
bt again there is same problem that at switchoff condition and at remove battery it is rendomly connect and disconnect bt i had installed all drivers
now what is problem with my phone
again sp n bin4ry not working
hlp brooooooooooooooo

I too faced this problem once when i had bought a new canvas...but it was soon solved by installing drivers.
But your case is damn different.
Here i see no solution....
And please don't flood the inbox with same messages buddy.
I have a busy schedule these days and don't get enough time for xda.

If bootloader is locked then in any case your phone won't brick.
-download drivers or install by connecting your phone
-connect phone & start SP tool (without bettry)
-start download on flashtool after loading scatter file
-insert bettry
Hit thanks ,it doesn't cost anything

All about - Lenovo A5500-F

Hey Guys i Create This Thread to discuss all about this tablet
i have found a lot of information about it and i would like to share with the comunity
i'm not a developer ( but i want to become )
but well
here i'm going to be posting stuff relater to this tablet and specifically the model F
LENOVO A5500-F (WIFI-ONLY)
hacks, mods ,tutorials and everything about this tablet
feel Free to ask and comment in this thread
and WELCOME.!!
THAnkS!
XDA:DevDB Information
Lenovo A5500-F (Wi-Fi Only) Android-Development, ROM for the Android General
Contributors
Zoidiano0, Zoidiano0
Source Code: http://www.mediafire.com/download/2mgrfrr4kc6ngrk/lenovo_a10-70_a8-50_osc_20140416.tar.gz
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KitKat 4.4.2
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2015-06-06
Last Updated 2015-06-05

Root tablet
First Of all with our tablet we need ROOT
the only app that i tried and can Root The Tablet is
KINGO ROOT
DOWNLOAD
USB DRIVER
DOWNLOAD
here are the steps to do this
1.-Enable Debugg Mode inyout tablet (settings - about tablet- 7 tabs on build Number-enable usb debug )
2.- Download the Drivers
3.- Connect yout Tabler with your USB cable And Install it with the drivers
4.- Download=>Install==> Launch the KINGO ROOT APP ( LINK above)
5.- Hit ROOT and wait till The magic Happend ..
6.-Enjoy
u can also download SuperSU and set it as main root manager app

Recovery twrp 2.8.0.0
now we r going to install TWRP AS MAIN RECOVERY
DISCLAIMER:I'm Not Responsabe for any damage on your tablet or if your warantie is avoid, do this by your owm responsability
FILES TO DOWNLOAD
MTK UNCLE TOOLS
DOWNLOAD
Flashify
Download from Google Play Download
TWRP image
DOWNLAOD
ok now there si 2 methods tod install this
METHOD 1
U MOST BE ROOTED TO DO THIS
1.- Download Flashify
2.- Copy the file to the sdcard
3.-open Flashify and give it root permissions
4.- Just in case make a back up of your Stock Recovery Image
5.- flash the image with Flashify (may take 2-3 minutes )
6.- reboot to recovery and Enjoy.!
METHOD 2
U MOST BE ROOTED TO DO THIS
1.- Install Uncle MTK Tools (link Above)
2.- Copy the TWRP image to the Sdcard
3.- open Uncle MTK Tools - Engeniering - Install new Recovery and wait till ends
4.- reboot into recovery and enjoy.!
File Source: LENOVO-FORUMS.RU
if u Got any questions Jut let me know

Restore STOCK FIRMWARE
Hi Guys now i'm gonna teach you how to install the Stock Rom
this is useful when u BRINK your device
so this is a UNBRINK Procedure
DISCLAIMER:I'm Not Responsabe for any damage on your tablet or if your warantie is avoid, do this by your owm responsability
FILES TO DOWNLOAD
STOCK ROM
DOWNLOAD ROM
SP FLASH TOOLS
DOWNLOAD FLASH TOOLS
ok after you donwload all the files follow this steps
well in the file of the ROM there is all u need to install the rom
ROM - SP FLASH
but there is no the PRELOADER DRIVER so u need to download the other Flash tools to install just search it inside the folder and install it
Notice that is an UNSIGNED DRIVER so if u r using WIndows 8 or 8.1 you need to diable it after that your r going to be ok
I did it my self and it worked :good:
1.- Uncompress the Rom File
2.- Locate the Falsh Tools Inside
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.- Open he flash tools as ADMIN
3.- Load the Scratter File To flash tools
to thispoint u had to have installed the device in preloader file
HOW>???
turn OFF Your tablet
and connect with the usb cable , soon as you plug in you will the in the Device manager an uninstalled Device as MT
5** PRELOADER or somethink like that
then install it with the driver in the flash tools folder and you are done
4.-HIT FIRMWARE UPDATE to start the instalation
5.- Connect your tablet toh the USB cable and wait till the Program ends
6.- The procces take about 5 minutes
7.- when the process finish u r goint to het a windows with a green circle and your tablet will turn off so UNPLIG THE TABLET
PRESS AND HOLD THE POWER BUTTON UTILL STARTS
8.- Wait Untill Boot Up
9.- sign in with Google And enjoy Your Tablet
Source of Files:LENOVO-FORUMS.RU
if u got a question post it and ill aswer it.!
THANKS

Inside the lenovo
ok i was doing some flashing on the devices and i freeze my tablet on the Preloader mode and i had to disamble the tablet and take the power conector out to avoid that ..
Here are some Pictures of the INSIDE
Enjoy
i noticed that there is place for a SIM CARD SOCKET
and a couple contacts in the top ( for speaker maybe)
i'm going to see what i can do with it

what about some custom roms ,thx
lollipop would be sweet

Maxx Audio Effects Mediatek Edition (by Arcatarc)
hi guys !!
as the creator of this thread i',m now bringing you this mod for our tablet
is the Maxx Audio Effects Mediatek Edition (by Arcatarc)
i tested already on my tablet and works just fine,!!
LINK TO MOD
u need the TWRP POST ABOBE to be able to install it and use it
so install it if u want to try sometring new or just if u dont like Dolby .
DOLBY SYSTEME BECOMES USELESS AFTER THIS
so keep in mind that and do a nand backup !
cheers..!!
comment if u can find any goody for this tablet.!!

ya i know im going to try to build a cyanogenmod 11 version for this tablet and then go for a 12 version but first i'm trying and lerning with my NEXUS 7 2012 how to cook a rom then i'll move forward for this lenovo .!!

Lenovo a5500 source code developers needed
hi guys
i bring you the source code for this tablet
so if anyone is a developer or know something about how to cook a rom here is what you need
LINK for SOURCE CODE
if anyone want ot try to compile anything for this tablet is WELCOME
see ya.!

Really interesting Thank you for this Information!

What about reviews?
Any one that has posted a review of this tablet? I'm considering to buy this one but not many reviews out there. I had the A1000-F but because of the USB port I have to update and planning to stick with Lenovo.

Its a good tablet
balomtz said:
Any one that has posted a review of this tablet? I'm considering to buy this one but not many reviews out there. I had the A1000-F but because of the USB port I have to update and planning to stick with Lenovo.
Click to expand...
Click to collapse
Hi.!!
well i started this thread cuz i saw that this tablet is pretty nice i mean
its 8" resolition 1200x800 (aprox)
DISPLAY
its 8" resolition 1280x800 (aprox)
full COLOR
Adnd i mean color si full vivid colors is pretty nice u can see the dislpay from any angle u want i got no distorcion or a PROTHOGRAPH-FLIM Effect
is super brigth
SPECS
Processor
CPU Mediatek MT8382
Quad-core 1.3 GHz Cortex-A7
GPU Mali-400MP2
1GB of RAM
MAIN REVIEW
to be honest quite remarcable performance u can do what ever u want and it does easily
i been using it for a out 1 year and it can handle everithing
SONIC RACING sinc the last update is not woking but i dot play too much so is not a problem to me
But my little cusings does so i have instaled a few games to let them play
i use it mostly for reading and broswing , FB , Camera, Mail Checker , music
adn like a mini laptoy i just attach my usb cable via OTG and works just fine
and as u can see u got everything to mod it ( if u r thinking aboit do it ) u got ROOT RECOVERY UNBRINK
and w hope that some developer add to this an try to compile a new rom for it ( i'm learnig how to complile to but its goint to take a wile cuz mediatec devices are a little bit tricky to do some mods, but are cool and u can test if u want cuz if u kill it u can restore via the UNBRINK precedure
the sound is not pretty loud u have to set a ew value in ingeniering mode and u get better sound and louder
( i'm goit to post how soon so if u want to buy it and u want to do so.. ))
u now were to find..
if i recomend this tablet
:good::good::good::good::good::good: YES
and one more thing u got OTA Updates So soon as u buy it u'll get updates cuz comes with JB4.2.2 and is upgrated to
4.4.2 KIT KAT
so ya lest wait till it gets the update to LOLIPOP>!! :fingers-crossed:

Drivers not working
When I try installing the drivers on my Win7 64-bit machine, it says there are no drivers available. When I've gone to the device manager and found the Lenovo device, it states that no drivers are currently installed. I've tried telling it to update the driver and manually pointed to the unzipped folder, but it says no drivers could be found. The end result is KingoROOT doesn't see the device, even if debugging mode is enabled.
Any ideas?

Jaling Orion said:
When I try installing the drivers on my Win7 64-bit machine, it says there are no drivers available. When I've gone to the device manager and found the Lenovo device, it states that no drivers are currently installed. I've tried telling it to update the driver and manually pointed to the unzipped folder, but it says no drivers could be found. The end result is KingoROOT doesn't see the device, even if debugging mode is enabled.
Any ideas?
Click to expand...
Click to collapse
well u need to install not only compressing and setting the folder
u need to install it from the .ini file so u can install it as android adb devices
i think it says android debug bridge or something try to install it that way and
it would be ok
if not let me know

hi guys well i'm here asking for help my i just brink my tablet and i cant restore it even with my unbrink procedure .. but i find a way to make it.. up and running again and is uploading a backup via twrp pls if u can upload a copy of ur backup's pls do it i want my tablet back to life
when itry to uploa the new firmware says
S_DA_SDMMC_WRITE_FAILED (3149)
if u know obut this problem pls let me know
and if someonw can pls make a full firmware dump with MTK Droid Tools
i would be nice and more usefull
thanks.!!

NEW VIDEO FLASH INSTRUCTIONS
https://www.youtube.com/embed/VzPzvckRKZ8

Does anybody have latest official A5500-F ROM?

the latest offcicial om is the one its in the link for unbrink u have to flash it and its ready to go. .
loo in the UnBrink post in the thread and u can flash it
the lates rom is kitkat 4.4.2 there is no a newer version for it cuz mediatek dont realease the firmware

Attention: the flash tool inside A5500F_A442_000_013_140526_ROW.rar is an old version. Better download latest version SP_Flash_Tool_v5.1352.01

Hi everybody!
I wonder if any of you with rooted Lenovo A5500F running Kitkat 4.4.2 can create and send me a backup (like Titanium or similar) of 4 Lenovo system apps - LenovoID, Lenovo Weather, Lenovo Weather Service and Lenovo A8-50
I'd like to return my tablet to it's original state, but have accidentally deleted those .apk files, and now factory reset cannot reinstall them