Hi Everyone
Does anyone know how to take apart the VOX so that the camera lens can be cleaned... mine has some moisture behind it the lens cover.
I have tried to find a service manual but cant find one...
Anyone know ?
Cheers
SteveC
You can carefully pry off the silver back (saying 2.0 megapixels) with a small knife and then you'll have access to the plastic lens-cover, which also can be removed. It's just glued to the back.
However, I have the same problem... It's like a haze on the plastic, haven't been able to clean it :-( Have been thinking to just remove the plastic lens cover, pictures are much clearer without it!
x11freak said:
However, I have the same problem... It's like a haze on the plastic, haven't been able to clean it :-( Have been thinking to just remove the plastic lens cover, pictures are much clearer without it!
Click to expand...
Click to collapse
Same problem here but I'm afraid the camera lens won't take the dirt and dust which it is exposed to even when using and transporting the phone very carefully. Thus I did not remove the cover yet, although the photos do look somewhat hazy.
Hi, i have a problem with my TF... the camera lens is dirty but i cant clean it because the dirt is inside camera lens.... anu ideas what should i do? It takes bad pitures because the lens
If you can, return it for service. If not, either take it to an electronics repair shop that can disassemble the case and remove the dirt, or try to do so yourself by reading one of the teardown threads.
So the glass covering the camera lens recently broke on my girlfriend's Galaxy S7. The camera still worked and focused correctly, but I tried to replace the glass.
I used a heat gun to remove all of the broken glass and adhesive. Ever since I did that, everything looks "foggy" in the camera app. It's like there's moisture covering the lens. We tried cleaning the lens with a Q-tip, but it still looks the same.
Anyone know why this would happen? Did I damage the camera unit with the heat? Any advice on what to do? Thanks in advance!
Maybe some adhesive is left between camera module and lens? Are lens exactly the same as the ones before? Just throwing some ideas around because I am honestly not an expert on this, might be damaged module but I don't know enough to say anything.
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Wait but is it foggy when you put lens over it? I mean is the whole package there or not? Because that's what lens are for, to focus stuff on the camera sensor. It's not clear from your post if you actually did that or not. Camera without lens with always be "foggy".
Edit: Reading it for 3rd time, is the exterior glass the only thing broken or is there more? Flat glass will not focus image so that is no the issue then. For a second I thought that you have camera module without any glass. Post some pictures I guess, from the camera and of the camera.
Sorry for the confusion. Yes, the exterior glass was the only thing broken. When it first broke, I ripped the shards off, and bought a replacement glass cover online. The camera was still working until I used a heat gun to remove the residual glass and adhesive.
After I did that, I tested the camera again, and that's when it looked foggy. Anyway, I'll post some pictures when I get the chance.
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
NeoDJW said:
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Click to expand...
Click to collapse
I was following a tutorial video I found online. The said that any residual adhesive from the old glass might cause an imperfect seal, and any old glass pieces might cause the new glass to crack. So, they removed it with a heat gun. How do you go about cleaning the leftover residue? Just curious. Thanks.
ttf said:
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
Click to expand...
Click to collapse
Thanks for the input. Here's some photos. This is what an image looks like when taken with the camera currently:
Here's a picture taken with my S7, which doesn't have a damaged camera. This is what the image should look like:
Here's a closeup shot of the damaged camera. I haven't put the replacement glass on yet. I am waiting until this issue is resolved.
Looking at that close up shot of the lens, it does look like there's something on it. I can't tell if those are scratches or residue. Any idea what might be a good way to go about cleaning it? It seems like it would be hard to clean something that small with optical cleaning paper, especially since the unit moves. Thanks again!
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
ttf said:
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
Click to expand...
Click to collapse
Thanks for the advice! I don't have an air blower pump. Can I use a can of air? Anyway, I'll try these tips when I get back in town tomorrow. Thank you again!
Sure a can of air can do the trick, be careful though, some spray liquid and let some residue, test it on a piece of paper first. Tell us how it goes.
Have you washed the phone with water before the glass broke?
Airman1947 said:
Looking at that close up shot of the lens, it does look like there's something on it.
Click to expand...
Click to collapse
If the gunk doesn't clear with alcohol (e.g. lens cleaner) then it may be that the lens itself is damaged. If the heat gun made the lens too hot it may have damaged the actual lens itself.
That rear glass looks like the coating is flaking. You might need to replace the module. http://www.ebay.com/itm/Genuine-Sam...ont-Rear-Lens-Flex-Cable-Module-/192066941308
Thanks for all the help, everyone! So, I tried cleaning the lens with a can of air, and also with lens cleaner on a Q-tip covered with optical cleaning paper. Same results.
Looks like whatever the problem is, it's gonna require replacing the camera unit Darn, wish I hadn't touched it. Was working fine. Anyway, thanks again!
Thanks for the follow up and sorry to hear it didn't fixed the problem. Maybe you could ask samsung to get you a price quote for the replacement or if you're really adventurous you could buy the camera module as a DIY project, be extra careful though you'll most likely avoid your warranty and the IP67/68 (someone posted a link in the thread for the camera unit), or ask a quote in a 3rd party shop?
Airman1947 said:
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Click to expand...
Click to collapse
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
JOFowler said:
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
Click to expand...
Click to collapse
Aw man, yeah looks like the same thing happened to you. Yeah, I think that the heat damages the lens on the camera unit. I couldn't find a way to get rid of the blurriness.
I ended up just cashing in on the phone insurance for mine. If you have it, I'd suggest doing the same, unless you're feeling adventurous and wanna try and replace the camera unit. Sorry I can't be more help. Good luck!