Related
From the clips I've seen online and I think on the diamond, the holes in the back cover for the camera lens and (in the case of the touch pro) the light, have a clear plastic lens within the back cover which some reviewers criticised because it could get smeared with fingerprints etc.
Taking the back off mine this morning to put battery and sim in, noticed that there is no clear plastic cover, the square 'frame' is there in the back of the back cover to mount such a piece but it has not been fitted (assuming mine hasn't fallen out).
Same with everyone else?
kempas said:
From the clips I've seen online and I think on the diamond, the holes in the back cover for the camera lens and (in the case of the touch pro) the light, have a clear plastic lens within the back cover which some reviewers criticised because it could get smeared with fingerprints etc.
Taking the back off mine this morning to put battery and sim in, noticed that there is no clear plastic cover, the square 'frame' is there in the back of the back cover to mount such a piece but it has not been fitted (assuming mine hasn't fallen out).
Same with everyone else?
Click to expand...
Click to collapse
Yep, same here, you're all good.
Cheers, must have been a last minute thing then in response to criticisms.
kempas said:
Cheers, must have been a last minute thing then in response to criticisms.
Click to expand...
Click to collapse
Well ours are inset, so I wouldn't worry about fingerprints, but what does worry me is that now it's easier for dirt to get trapped in there.. At least it's easy to clean it out without the plastic cover, imagine trying to get a Q-tip down in there?
Easier to just slide the back of to clean the lens if need be.
kempas said:
Easier to just slide the back of to clean the lens if need be.
Click to expand...
Click to collapse
Exactly, but if they put a plastic cover on the back like the Diamond, you couldn't get dirt out from inside the case. Major PITA.
I apologize if this has been covered a 1000 times, but I did a cursory search and only run into threads about the screen cover or full-body protection, i.e. the lens cover is almost always just mentioned in passing.
I'm one of the many who have discovered that the plastic lens cover integrated into the battery cover is extremely prone to scratches. I've ordered two extra covers from Expansys, but at this rate, I'll need to get a new one every 2-3 months.
On previous phones, I tried various screen covers that either came with a lense cover (Martin Fields) or cut one out myself, only to find that the clarity of the plastic screen covers causes the pictures to come out hazy or milky. This is partially due to the difficulty of removing fingerprints, but even more due to the fact that screen protectors aren't really designed to be crystal clear like a camera lens is. I invariably took them off and risked it, but on most of my other units, the only thing that was real glass was the lens cover. Not so on the Desire.
Does anyone have any advice on this front?
i use the martin fields lens cover that came with the martins fields screen cover... its very good for the price....
I had an old screen protector that I cut a rectangle to cover the lens.
Looks OK but not perfect.
I may try to cut a circle to cover it properly.
I am not sure how you damage it, i keep my phone in its pouch, when i take it out or put it back down i put the phone ontop of the pouch so the camera is not touching the surface. A cover would i assume make the picture loose quality?
I'm generally very careful with my phones, but accidents happen and I managed to get a bunch of hairline scratches on the lens cover after just 6 weeks with the phone.
hoppi05 said:
i use the martin fields lens cover that came with the martins fields screen cover... its very good for the price....
Click to expand...
Click to collapse
Can you show me URL for this product?
Not saying that they haven't made progress, but I used to have a Martin Fields lens protector on my old Omnia i900 and found that the plastic of the lens protector caused hazy pictures even when clean.
I'm beginning to wonder if a liquid solution might be the way to go. Something like clear nailpolish that could be removed and reapplied if it got scratches in it. Anyone hear of something like this?
I've got the same problem, a lot of little scratches at the lens cover which make my photos not as sharp/clear as it should be. I think with the pouch I recently ordered the problem is over, but for now I must order a quite expensive new battery cover.
Quist said:
Not saying that they haven't made progress, but I used to have a Martin Fields lens protector on my old Omnia i900 and found that the plastic of the lens protector caused hazy pictures even when clean.
I'm beginning to wonder if a liquid solution might be the way to go. Something like clear nailpolish that could be removed and reapplied if it got scratches in it. Anyone hear of something like this?
Click to expand...
Click to collapse
The liquid would have to be perfectly flat and of uniform thickness to prevent refraction, I doubt such an application could be achieved "at home"
I just use a thick gel skin for my phone and a padded microfibre pouch.
The thickness of the skin makes the lens very deeply recessed so it's way safer.
albert_htc said:
I had an old screen protector that I cut a rectangle to cover the lens.
Looks OK but not perfect.
I may try to cut a circle to cover it properly.
Click to expand...
Click to collapse
Lol..u just give me a got idea!! Im going to try it on my sensation!!
Edit: Actualy i already try the rectangular one and its fit perfect. Tomorow i wil try to cut it in round shape one ;P
Sent from my HTC Sensation Z710e using XDA App
take out the lens
Perhaps too obvious, but I knocked out the camera lens in the battery cover. After more than a year still no scratches on the camera itself and perfect pictures (at least, for this camera unit). Protection is sufficient with a pouch.
naimmkassim said:
Lol..u just give me a got idea!! Im going to try it on my sensation!!
Edit: Actualy i already try the rectangular one and its fit perfect. Tomorow i wil try to cut it in round shape one ;P
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
Crap!! It just dont work..after few days dust started to accumulate between the rectangular screen protector and the camera lens. More scratch now!! Crap..crap!! >¦c
P/s: i did try to cut the screen protector round, but the glue of the screen just come out during cutting process..not work also..
Sent from my HTC Sensation Z710e using XDA App
just remove the scratched up bit of plastic and stop worrying, the lens is countersunk below the case anyway,
i removed the plastic lens from my battery cover after having the desire for about 2 weeks, 6-7 months later my pictures still come out as sharp and defined as when new,
if you get any dirt on the camera lens simply take off your battery cover and you can clean it easily,
braddersss said:
just remove the scratched up bit of plastic and stop worrying, the lens is countersunk below the case anyway,
i removed the plastic lens from my battery cover after having the desire for about 2 weeks, 6-7 months later my pictures still come out as sharp and defined as when new,
if you get any dirt on the camera lens simply take off your battery cover and you can clean it easily,
Click to expand...
Click to collapse
The worry part is during clean up the camera lens. If i wipe it with some chemical n tissue, there is a high risk the lens get scratch ;c
Sent from my HTC Sensation Z710e using XDA App
naimmkassim said:
The worry part is during clean up the camera lens. If i wipe it with some chemical n tissue, there is a high risk the lens get scratch ;c
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
well as i said mines been fine for the last 6-7 months, i just take the battery cover off and give it a wipe with my t shirt or something, no scratches so far,,
braddersss said:
well as i said mines been fine for the last 6-7 months, i just take the battery cover off and give it a wipe with my t shirt or something, no scratches so far,,
Click to expand...
Click to collapse
This may not be necessary!
I've been having this issue for ages too.. i clean the plastic lens but it appears to be scratched as pics come out hazy, just like other posters above. I have just pushed out the plastic lens on the battery cover as suggested and sure enough pics are instantly clearer.. however when inspecting the plastic lens cover i realized two things
* the sticky part is very sticky!
* the inside of the plastic part (the sticky side) appears to be dirty..
i cleaned it with one of those cloths you use for specs and since it's still very sticky i put it back in.. tried a few shots with the battery cover on and off, and i' can't notice any difference.. no longer hazy!
sure though, knocking it out avoids having to clean in form the inside .. but i'm afraid of scratching the inside lens.. that one's more difficult to replace
if you REALLY want to go all out, you could take the cover to a jewler/watch repair and have them replace the glass with sapphire crystal... it's so small that it may not cost an outrageous amount, but then they would have to cut it to size...
Bought myself another battery cover from ebay, I hope this one will last, gonna have to figure out how to maintain that new one scratch-free.
The one I bought:
http://www.ebay.com/itm/130544376251?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Another option for those worried about their lens ...
Amazon ( Sorry, I only found it on the german site ) has this item listed :
http://www.amazon.de/Ersatzglas-Kam...WWGK/ref=sr_1_3?ie=UTF8&qid=1320922089&sr=8-3
It's a saphire glass replacement lens cover for our beloved Desire , and apparently is very scratchproof (according to reviews) . They had a slight quality problem early in the manufacturing process, the first items came out slightly too large, but it seems that's fixed by now ...
I will order one and give it a try , as I have quite bad scratches in mine after 1.5 years of normal use and don't really want to leave the camera itself uncovered
I rarely take pictures with my sensation but the other day my wife and I were out and I decided to take some pictures when i noticed a dot on the screen. Initially i thought the dust was on the outside of the lense so I simply tried blowing it off, then I tried wiping, then figured out it has to be under the lense. I know for sure its dust because when i zoom in on the camera it looks like a big ass black cotton ball. How do I get this one speck of dust out from under the lens ? I think I can take a duster can to it but is there a way to take the lens off then place it back without any damage?
thanks in advance guys
I have the same problem. Came here hoping there is solution
I've heard some people removing the lense with a tiny screwdriver.
If you look at the top right of the lense, there's a tiny gap where you should be able to remove the uppest lense.
Even though it might sound possible, this operation requires a lot of caution. Personally, I wouldn't recommend doing this as it probably voids your warranty.
Htc should be able to solve this problem for free, as dust shouldn't be able to get inside the camera.
When I turn on front camera I see myself mugish, like there is fog around me.
I think that there is something on front lens, because in the left bottom everything is perfectly clear.
Has anyone here experienced such thing?
And has anyone here tried to clean their front camera lens already?
Thanks in advance
well, ehm...the quality sucks actually
or, you can open the back cover, the front glass of your front camera might have caught much dust.....or, if the dust reached inside, which is a tough case coz the camera is sealed in good way all around, blowing near the camera and around it would do the trick...
arabology said:
well, ehm...the quality sucks actually
or, you can open the back cover, the front glass of your front camera might have caught much dust.....or, if the dust reached inside, which is a tough case coz the camera is sealed in good way all around, blowing near the camera and around it would do the trick...
Click to expand...
Click to collapse
I have to wipe mine once a week. The front camera is indeed a dust catcher.
hi
I use a Q tip LIGHTLY I MEAN LIGHTLY moistened with alcohol, then i take a dry Q TIP and clean after that. PLEASE make sure the first Q tip is barely moist, just slightly because you dont want to WET the lens. be careful and gentle and it works wonderfully. This is how i clean my lens. Im sure their are other ways but the Q tip really gets in there and cleans it good!! Good Luck..
sshede said:
I have to wipe mine once a week. The front camera is indeed a dust catcher.
Click to expand...
Click to collapse
yeah, thanks to the innovation of hTC keeping the front camera hole open
So the glass covering the camera lens recently broke on my girlfriend's Galaxy S7. The camera still worked and focused correctly, but I tried to replace the glass.
I used a heat gun to remove all of the broken glass and adhesive. Ever since I did that, everything looks "foggy" in the camera app. It's like there's moisture covering the lens. We tried cleaning the lens with a Q-tip, but it still looks the same.
Anyone know why this would happen? Did I damage the camera unit with the heat? Any advice on what to do? Thanks in advance!
Maybe some adhesive is left between camera module and lens? Are lens exactly the same as the ones before? Just throwing some ideas around because I am honestly not an expert on this, might be damaged module but I don't know enough to say anything.
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Wait but is it foggy when you put lens over it? I mean is the whole package there or not? Because that's what lens are for, to focus stuff on the camera sensor. It's not clear from your post if you actually did that or not. Camera without lens with always be "foggy".
Edit: Reading it for 3rd time, is the exterior glass the only thing broken or is there more? Flat glass will not focus image so that is no the issue then. For a second I thought that you have camera module without any glass. Post some pictures I guess, from the camera and of the camera.
Sorry for the confusion. Yes, the exterior glass was the only thing broken. When it first broke, I ripped the shards off, and bought a replacement glass cover online. The camera was still working until I used a heat gun to remove the residual glass and adhesive.
After I did that, I tested the camera again, and that's when it looked foggy. Anyway, I'll post some pictures when I get the chance.
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
NeoDJW said:
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Click to expand...
Click to collapse
I was following a tutorial video I found online. The said that any residual adhesive from the old glass might cause an imperfect seal, and any old glass pieces might cause the new glass to crack. So, they removed it with a heat gun. How do you go about cleaning the leftover residue? Just curious. Thanks.
ttf said:
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
Click to expand...
Click to collapse
Thanks for the input. Here's some photos. This is what an image looks like when taken with the camera currently:
Here's a picture taken with my S7, which doesn't have a damaged camera. This is what the image should look like:
Here's a closeup shot of the damaged camera. I haven't put the replacement glass on yet. I am waiting until this issue is resolved.
Looking at that close up shot of the lens, it does look like there's something on it. I can't tell if those are scratches or residue. Any idea what might be a good way to go about cleaning it? It seems like it would be hard to clean something that small with optical cleaning paper, especially since the unit moves. Thanks again!
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
ttf said:
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
Click to expand...
Click to collapse
Thanks for the advice! I don't have an air blower pump. Can I use a can of air? Anyway, I'll try these tips when I get back in town tomorrow. Thank you again!
Sure a can of air can do the trick, be careful though, some spray liquid and let some residue, test it on a piece of paper first. Tell us how it goes.
Have you washed the phone with water before the glass broke?
Airman1947 said:
Looking at that close up shot of the lens, it does look like there's something on it.
Click to expand...
Click to collapse
If the gunk doesn't clear with alcohol (e.g. lens cleaner) then it may be that the lens itself is damaged. If the heat gun made the lens too hot it may have damaged the actual lens itself.
That rear glass looks like the coating is flaking. You might need to replace the module. http://www.ebay.com/itm/Genuine-Sam...ont-Rear-Lens-Flex-Cable-Module-/192066941308
Thanks for all the help, everyone! So, I tried cleaning the lens with a can of air, and also with lens cleaner on a Q-tip covered with optical cleaning paper. Same results.
Looks like whatever the problem is, it's gonna require replacing the camera unit Darn, wish I hadn't touched it. Was working fine. Anyway, thanks again!
Thanks for the follow up and sorry to hear it didn't fixed the problem. Maybe you could ask samsung to get you a price quote for the replacement or if you're really adventurous you could buy the camera module as a DIY project, be extra careful though you'll most likely avoid your warranty and the IP67/68 (someone posted a link in the thread for the camera unit), or ask a quote in a 3rd party shop?
Airman1947 said:
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Click to expand...
Click to collapse
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
JOFowler said:
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
Click to expand...
Click to collapse
Aw man, yeah looks like the same thing happened to you. Yeah, I think that the heat damages the lens on the camera unit. I couldn't find a way to get rid of the blurriness.
I ended up just cashing in on the phone insurance for mine. If you have it, I'd suggest doing the same, unless you're feeling adventurous and wanna try and replace the camera unit. Sorry I can't be more help. Good luck!