Database Info

[Q] Need Help ...

Hello guys, i have A10 tablet but it has no android system recovery ... is there anyway to set up android system recover ? because i cant find flashable image file for LiveSuit ( thanks in advance ...

You'll need to root your tablet to be able to get CWM which you use to flash in Recovery

After rooting download rom manager from playstore and flash latest recovery with it
Sent from my HTC Wildfire using xda app-developers app

Tablet is already rooted by manufacturer but it has no '' volume up and down button '' so there are 2 ways to flash it, using sd card or live suit ( but i am not sure there is CM10 live suit image file). I have downloaded CMW from google play but it doesnt start in recovery mode. i guess it is not a common tablet.
1.4 GHz Cortex AllWinner A10 Cortex A8
16 GB Memory
10.1 inch
1 GB DDR3 RAM
HDMI 1080P
ARM Mali [email protected] 350Mhz 3D
There is a video of this tablet on youtube if you type Piranha Business Tab 10.1
it's named Piranha Business Tab 10.1

Did you try doing via adb?
Sent from my muffin LIFE! Under maintenance.!

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

Star S1 MTK6589 IPS Screen 5.7"

Item specifics
Unlock Phones: Yes
Display Color: Color
Brand Name: Star
Design: Bar
CPU: Quad Core
Cellular: GSM,WCDMA
Display Resolution: 1280x720
Touch Screen Type: Capacitive Screen
Screen LCD Type: TFT
SIM Card Quantity: Dual SIM Cards
RAM: 1G
CPU Manufacturer: MTK
Camera: 12MP
ROM: 8G
Operation System: Android 4.2.1
Feature: GPS Navigation,Email,FM Radio,MP3 Playback,Touchscreen,Bluetooth,Wi-Fi,Memory Card Slots,Video Player,Gravity Response,Message
Model Number: S1
Display Size: 5.8 Inch
color: Black and white
Display: 1280*720
CPU: Quad core MTK 6589
OS: Android 4.2
Screen: 5.8 Inch capacitive touch screen
WIFI: Support
GPS: Support
RAM: 1G
ROM: 8G
CWM5 - ClockWorkMod 5
CWM6 - ClockWorkMod 6
TWRP - Team Win Recovery Project 2.4.4.0 (support for saving NVRam)
Stock firmware v2. TWRP. PrePooted. - The standard firmware. Removed Chinese applications, SMS-senders. Contains TWRP and ROOT.
Stock firmware. CWM5. PrePooted. - The standard firmware. Removed Chinese applications, SMS-senders. Contains CWM and ROOT.
Lewa Rom - Lewa Rom from Russia for S1.
Guys, sorry for my english ...

Dear [email protected],
Is the stock ROM missing uboot, cache & user data ?

strangermj said:
Dear [email protected],
Is the stock ROM missing uboot, cache & user data ?
Click to expand...
Click to collapse
They are specifically deleted! Why do you need cache & user data - Chinese applications need? If they are needed - I can put them separately. No problem!

[email protected] said:
They are specifically deleted! Why do you need cache & user data - Chinese applications need? If they are needed - I can put them separately. No problem!
Click to expand...
Click to collapse
Actually I am a beginner and my star s1 was bricked.
I use flash tool to upgrade firmware, it said i need to tick all necessary files. At last i use download it can load your stock ROM to my s1. However, my s1 can boot up with the booting sound but the screen only have back light. When I touch the screen, it have feed back like click sound and virbate..... but nothing can see... only back light is on.

What's your CPU MTK6589 or MTK6577 - they come in two flavors!

[email protected] said:
What's your CPU MTK6589 or MTK6577 - they come in two flavors!
Click to expand...
Click to collapse
mtk6589

strangermj said:
mtk6589
Click to expand...
Click to collapse
I found that uboot is the driver of display, front and back camera. Can you upload S1 uboot ? something like uboot.bin or lk.bin

strangermj said:
I found that uboot is the driver of display, front and back camera. Can you upload S1 uboot ? something like uboot.bin or lk.bin
Click to expand...
Click to collapse
http://yadi.sk/d/SUhKiA244k1rO

[email protected] said:
http://yadi.sk/d/SUhKiA244k1rO
Click to expand...
Click to collapse
:good::good::good:
My Phone can boot up la :fingers-crossed::fingers-crossed::fingers-crossed:
Thank you very much.
few problems:
After boot up, it show invalid IMEI, whatsapp said my device is a tab
use the home key cannot wake up the screen

strangermj said:
After boot up, it show invalid IMEI
Click to expand...
Click to collapse
Repair IMEI by the engineering menu.
1. Click on the button to dial the number and enter * # * # 3646633 # * # * If you do not work (and we did not work) then put IT. and go to the point of prozhke Engineer Mode-> Engineer Mode (MTK)
2. We fall into the engineering menu and choose: "CDS Information", "Radio Information", "Phone1"
3. At the very pinnacle of the field where it says AT + add EGMR = 1,7, "vash_imei1" in itogde get the string AT + EGMR = 1,7, "vash_imei1" button and click "SEND AT COMMAND"
where vash_imei1 - this is your imei for the first SIM card
4. If you want to register for the second imei sim card, then in the same row is typed AT + EGMR = 1,10, "vash_imei2" again and click the button "SEND AT COMMAND"
5. Exit the engineering menu and restart your smartphone.
P.S: You can find the IMEI under the battery ...
strangermj said:
use the home key cannot wake up the screen
Click to expand...
Click to collapse
This is the factory, and later made ​​a patch to fix it ....

finally I flash the ROM again and follow you instruction, it working now, thanks.

Now, I found a problem between bluetooth and 3G. When my Jawbone ICON HD connected, I can hear the sound clearly but my friend said my voice quality is very bad. Moreover, every time when I disconnect the call from my bluetooth, the 3G signal will lost and then need few second to search the network again. Is it the hardware limitation or software problem ?

Software...

I find bluetooth address Unavailable

Hello [email protected] i have same phone STAR S1 - i need a rom firmware you possibile help me ?
Thanks

I have a star G9300 mtk6577 android 4.1.1 y need to root any help me?
Sent from my e1920_v77_zlh_fwvga using xda premium

eminemskc said:
Hello [email protected] i have same phone STAR S1 - i know a mtk 6577 and have android 4.1.1 i need a rom firmware you possibile help me ?
Thanks
Click to expand...
Click to collapse
A little later lay the firmware for you to MTK6577.

how much does it?

The file will be available until 1 June 2013.
http://yadi.sk/d/MDUgH7fw5HLpe

Pls I have issues with downloading from the
server without resume capability, kindly help put
the rom for star s1 mtk6589 in a resume supported server. This will be
highly appreciated. Also is there an upgrade in
version of android available for this product yet?

[Completed] [Q]how to port custom recovery and flash method for bootloader mode on dazen 1

device name is coolpad dazen one (8297L-I00)
having Qualcomm Snapdragon 400/410 1.21 GHz cpu
architecture - 4x ARM Cortex-A53 @ 1.21 GHz
Board- msm8916
2 gb RAM
295 dpi
8 gb storage (4 gb system +4 gb internal)
running on 4.4.4
API level - 19
build ID - 4.4.150.00.T1.150528.KTU84P
java VM - Dalvik 1.6.0
openGL ES - 3.0
kernel architecture - armv7I
kernal version 3.10.28-gb76285c-00075-gdf72c7d(1501731)
(rooted)
i need a CWM recovery for my device
i found a device same as my device (coolpad/yulong f1 plus ) but with minor difference like name ,model etc
it is from the same manufacturer there are 6 version available 3 of MTK and 3 of qualcomm based chipset
i tried to flash recovery which was for f1 plus but it soft bricked my phone or something else all it was showing was bootloader mode
somehow i managed to flash stock recovery via bootloader mode using a batch program developed by cool community which was for flashing recovery on f1 plus
then i decided to port recovery by myself but there is no guide for porting recovery for qualcomm device using windows (as i don't possess linux or ubuntu os)
please help me out
and please tell me if i missed something
thank you in advance......

bonny1256 said:
device name is coolpad dazen one (8297L-I00)
having Qualcomm Snapdragon 400/410 1.21 GHz cpu
architecture - 4x ARM Cortex-A53 @ 1.21 GHz
Board- msm8916
2 gb RAM
295 dpi
8 gb storage (4 gb system +4 gb internal)
running on 4.4.4
API level - 19
build ID - 4.4.150.00.T1.150528.KTU84P
java VM - Dalvik 1.6.0
openGL ES - 3.0
kernel architecture - armv7I
kernal version 3.10.28-gb76285c-00075-gdf72c7d(1501731)
(rooted)
i need a CWM recovery for my device
i found a device same as my device (coolpad/yulong f1 plus ) but with minor difference like name ,model etc
it is from the same manufacturer there are 6 version available 3 of MTK and 3 of qualcomm based chipset
i tried to flash recovery which was for f1 plus but it soft bricked my phone or something else all it was showing was bootloader mode
somehow i managed to flash stock recovery via bootloader mode using a batch program developed by cool community which was for flashing recovery on f1 plus
then i decided to port recovery by myself but there is no guide for porting recovery for qualcomm device using windows (as i don't possess linux or ubuntu os)
please help me out
and please tell me if i missed something
thank you in advance......
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
There isn't a specific forum for your device.
However, you may post your questions here:
http://forum.xda-developers.com/android/help
You'll find expert advice there.
Good luck!

Revive my dead china clone with RK3188 (rockchip-rk31sdk-WAWJMDN1KN)

Hi,
I'm badly need some help to revive my (rockchip-rk31sdk-WAWJMDN1KN).
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
I decide to go ahead and try some custom rom using RKAndroidTool did not realize that by cleaning IDB I will low level format..
Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).
I can post link to my CWM backup if may help.
Inside that CWM backup is kernel.bin, system.bin recovery bin all large sizes files (complete CWM of my last working tablet rk3188). Maybe someone be able to advice how to make proper files to revive my system from that backup I have or help me some how to get recovery working so I can use my CWM backup or any other way to make this tab back to life again..
Many thanks for your kindness and time.
Have nice day
Adam

UPDATE ___
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.