Hello everyone.
I was trying to flash new rom with CWM recovery today.I did wipe data factory reset,wipe cache partition and advanced/format system.After that
there was no option to go back to previous menu and i tried volume +power combinations and my tablet powered off.After this i tryed to boot into cwm with every button combination volume down+power,volume up+power etc.and couldnt boot into cwm recovery.Tablet just boots and freezes at green android picture.Please help me i dont know what to do.My tablet specs and pictures in this link www-tvstar-eu/mid710/
I tryed also installing android-sdk and doing these commands : adb reboot recovery,adb reboot bootloader and its no use system just boots upto android green logo and thats it.I cant do anything.I just need to enter CWM recovery again.
Related
Hi Guys, I'm in a bit of a panic with my Nexus.
Looked in my pocked yesterday and the phone was randomly in a boot loop, just getting up to the google logo, then rebooting.. this was weird as the phone was working throughout the day. The day before I had installed Faux v5 (and I have cataclysms rom)..
Followed the instructions from [TUTORIAL] How to flash a factory image | Return to stock | Unroot your Nexus 5
to rever to stock image.
I run the flash-all.bat (using method 1 from Post1), which seems to complete successfully (writes to the device and it reboots a few times), but after this the phone gets stuck at the Google logo,
I cant get to the final two steps (which is wipe data/factory data reset), because in the step before where I select recovery, it just boots back to the google logo - no recovery. It will stay there all day, unless I hold power & volume down, then I can get back to the bootloader.
Since this failed (I have flashed the flash-all batch twice using different usb ports... but no joy.
If I run the fastboot device info, - it correctly shows my bootloader is unlocked...
I have tried to relock it, but hit the same problem, (if I run the fastboot boot c:\twrp.img etc) - it just wont boot into a recovery..
I am at a loss.. any help would be greatly appreciated...
I have also tried flashing a custom recovery (twrp & cwm), and I have the same problem with both.. they flash, but then I can get to the bootloader, but cant launch a recovery.. just gets stuck in a bootloop...
THANKS!
reboot bootloader (power + vol down)
go into recovery (the red triangle)
open up the recovery menu (power + vol up)
wipe cache
The problem I am having is I cant get into recovery.
I get into fastboot mode, I then hit volume up twice (to change from start > to recovery >).
I then hit power. But instead of a red! I get the Google Logo.. and I am back where I started.
Volume up & power does nothing, all I can do is Vol down & power, then I am back at the bootloader.. no recovery..
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
perimano said:
Hello,
I have successfully flashed CWM recovery image in my ZLR F9006 phone using mediatek tools.
When i am using ROM Manager i can successfully reboot in CWM recovery.
When i boot into recovery using the buttons combination(Volume+ and boot) my phone
boots in stock chinese recovery mode.
Is there any solution?
Click to expand...
Click to collapse
LOL found your post just coz i wanna get 1 of them
there might be more than one recovery partition i guess so command in bootloader says to flash secure recovery when key combo pressed
does cwm stay if you boot using key combo or you have to flash again ?
i'm guessing
1 boot into cwm
2 do a full backup
3 reboot phone check in file manager backup is on external sd !!! IMPORTANT !!!
4 power off the phone
5 try other key combinations ie :
Code:
VOL- and POWER
VOL+ and VOL- and POWER
VOL+ and HOME and POWER
VOL- and HOME and POWER
HOME and POWER
you get the drift
THIS WILL 99.9% FACTORY RESET YOUR PHONE (UNLESS YOU AVOID HARD RESET COMBO)
GOODLUCK
BTW HOW IS THIS PHONE IN HAND ?>
I have a zlr f9006 and I also flashed CWM. I also can't access it via key combination but CWM Rom Manager application gives you the option to "Reboot into Recovery" which actually works!
solution
How to boot this recovery:
- Power off
- Hold VOL+ and Power (will take longer time than VOL- and Power)
- Menu shows giving you choice between ROM downloader, UART, Recovery and Normal
- Use VOL keys to choose Recovery
- CWM boots
Hi,
My p500 phone is just showing LG logo on power up and gets blank after few seconds. I tried all combination volume, power, home keys.
It's not even getting detected by PC. Actually its not reaching to boot loader and stuck before that.
To achieve this situation what I did :
1. I wanted to flash new 4.4.2 ver 12 with this thread.
2. I wiped all data, cache , etc.
3. I tried to update CWM Recovery v6.0.4.8 http://forum.xda-developers.com/showthread.php?t=2564767 from v6.0.4.6.
4. During the installation I pulled out battery by mistake.
5. I rebooted the phone and it got stuck to blank screen after on LG logo screen.
Please suggest something.
I know phone doesn't have any data, rom and CWM recovery (corrupted) and not even boot leader.
Also adb is not able to detect as it's not booting till PC can detect a device.
I am sure it's not hard bricked
Please help , how can at least boot so that adb can detect.
Thanks,
Devesh
Solved
That's how it worked :
1. I pressed a magical combination (dont remember ) :
a. Up volume + back key + power key while inserting battery
or
b. Up down+ back key + power key while inserting battery
which game emergency mode. And that was enough for me.
2.Then, I used standard method to flash recovery and image see here
3. I flashed finally cwm v6.0.4.8 with kitkat 4.4.2.
and it worked
Guys, I just gained root access to my phone 5 days ago, yesterday I installed custom recovery (TWRP - openrecovery-twrp-2.8.5.0-xt1032). I think my device is XT1033. After that i tried to install xposed framework by installing it through the recovery and then my phone started to boot loop at the bootloader warning. My phone can access the fastboot menu. From there when i try to access recovery it just shows the logo of TeamWin followed by a black screen and then directs me to the bootloader warning message as usual and keeps looping. Also when I hit the factory reset button it tends to boot loop at the boot loader warning message.
The attachment shows the window it loops.
Please help me. Is my phone over?
Hey dont worryy. Just use philz recovery 6.55.0. That is best as twrp donot support xt1033.
Then in that just clear cache and dalvik cache. And try to reboot. If it does its good. If not then just flash any other rom using otg (usb ) if u dont want to lose any data.
Edit- to flash recovery. Press the power key for like 10 sec until the phone reboot. And black screen comes up. Then quickly press power and volume down key for 3-4 sec to go itno fastboot mode. Then flash the philz recovery ( search for it in original android development or google it) and flash it.
I recently picked up a virus on my rooted A510 and want to re-flash Nothrills.
I am unable to access recovery, either by holding Vol Down while powering on or with Vol Up while powering on.
Is there another method? (The power down menu has no restart/reboot to recovery option either)
Installed CWM with flashify and now I'm stuck in a permanent boot loop.
Either I power up normally and it stays on the ACER screen or I power up to CWM and it switches off and on again ad infinitum.
Help?!
I eventually got a little further. On the third PC I tried, using Linux, I was able to access fastboot as sudo and reflash CWM.
This time, when restarting to recovery I got the full CWM interface and I could reflash the ROM from the ZIP file.
however, after restarting I'm back to being stuck in
Bootloader version JB-d0ca683 (unlock mode)