Database Info

Tiamat Kernel Error

Why my phone always freeze after I OC'ed my phone to 2ghz using Tiamat kernel? How to fix it?
Thanks in advance
Sent from my Desire S

you shouldn't be OC at 2ghz, your asking for trouble

Its because I cant play 9mm smoothly. Then whats the maximum OC that will not freeze my phone?
Sent from my Desire S

Are you serious? I'm using stock Rom 2.3.5 with no root and s-on and its smooth for me... No lag what so ever
Sent from my HTC Desire S using XDA App

Which ROM are you using?
Also try increasing the voltage of the kernel, as I believe Tiamat is under-volted (could be wrong). Doing this may stabilise the performance.
JDraco18 said:
Its because I cant play 9mm smoothly. Then whats the maximum OC that will not freeze my phone?
Sent from my Desire S
Click to expand...
Click to collapse

xxtweaker app

Hello, now Im on JellyBam and "voldemort" kernel, and it has xxtweaker app that alow oc gpu, but when I turn it on i have that kernel not suported. Is there any other app like this for this kernel or I need other version of it? now Im on 0,4,0 beta1

scorpio1991 said:
Hello, now Im on JellyBam and "voldemort" kernel, and it has xxtweaker app that alow oc gpu, but when I turn it on i have that kernel not suported. Is there any other app like this for this kernel or I need other version of it? now Im on 0,4,0 beta1
Click to expand...
Click to collapse
AFAIK only tegrak works for over clocking (not 100% sure) but I can say of course jellybam's kernel is the only one which support its app as its by the same author...even not all kernels work on jellybam!
Use original kernel or a different OC application
Sent from my GT-N7000 using Tapatalk 2

Wrong section I guess
Be ware of warnings and ban here cause of asking for support regarding that kernel
Sent from my GT-N7000 using Tapatalk 2

Overclocking

Hello, i have a quick question
I have installed CleanROM 3.2.1 odexed, and Unters stock Tf300t OC Kernel. I would like to ask how do you guys feel about overclocking your tab? I have installed SetCPU and limited overclocking to 1,5 ghz in performance mode, do you think i could do any damage to the cpu?

I don't think that kernel has overclocking. But I usually do it. Just don't constantly have it set to the Max CPU or it will shorten the CPU life by a lot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Triger said:
Hello, i have a quick question
I have installed CleanROM 3.2.1 odexed, and Unters stock Tf300t OC Kernel. I would like to ask how do you guys feel about overclocking your tab? I have installed SetCPU and limited overclocking to 1,5 ghz in performance mode, do you think i could do any damage to the cpu?
Click to expand...
Click to collapse
I have mine overclocked up to 1.8 with Clemsyn's and it also turns the GPU up to 650. I personally love the overclock. It goes good with me running Hydro 6.0 with the cranked GPU, I think it's really only good if you have the GPU power to back it up as well. If you want to overclock it higher, check out Clemsyns!
elesbb said:
I don't think that kernel has overclocking. But I usually do it. Just don't constantly have it set to the Max CPU or it will shorten the CPU life by a lot.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
If his CPU is at 1.5 then it's overclocked, stock runs at 1.3

I think that up to 1,6GHz is harmless

lightitwithfire said:
I have mine overclocked up to 1.8 with Clemsyn's and it also turns the GPU up to 650. I personally love the overclock. It goes good with me running Hydro 6.0 with the cranked GPU, I think it's really only good if you have the GPU power to back it up as well. If you want to overclock it higher, check out Clemsyns!
If his CPU is at 1.5 then it's overclocked, stock runs at 1.3
Click to expand...
Click to collapse
I will try Clemsyns kernel now, but what is the stock frequency of the GPU?
Thank you for the replies, i also thought that overclocking to 1.6ghz will do no harm.
Edit: for some reason i can not boot with Clemsyns 1,6 ghz kernel. I used the kernel installer provided by the OP in the cleanrom thread. Any suggestions?

Triger said:
I will try Clemsyns kernel now, but what is the stock frequency of the GPU?
Thank you for the replies, i also thought that overclocking to 1.6ghz will do no harm.
Edit: for some reason i can not boot with Clemsyns 1,6 ghz kernel. I used the kernel installer provided by the OP in the cleanrom thread. Any suggestions?
Click to expand...
Click to collapse
I honestly can't find the stock frequency of the GPU anywhere, but I know its lower than 500!
Also, don't use the kernel installer in the OP of the CleanRom thread. Go into Clemsyn's thread and download the kernel you want to use.
Clemsyn's Thread: http://forum.xda-developers.com/showthread.php?t=1970704

Stock GPU=416Mhz

I say over clocking is doable until 1.6ghz. After that, I don't think it'll be great for the CPU
Sent from my TF300T using Tapatalk HD

kyokeun1234 said:
I say over clocking is doable until 1.6ghz. After that, I don't think it'll be great for the CPU
Sent from my TF300T using Tapatalk HD
Click to expand...
Click to collapse
Mine is at 1.8 and it runs perfectly fine, no issues at all. Got any reasoning to think that it's not good for the CPU?

+1 for overclocking. I'm running the modified Unter kernel for the PA ROM and usually keep mine set at 1.6. Everything just seems to run so much smoother with it turned up.
Sent from my LG- LG855 running MegaTron using Sky blue Tapatalk.

Miro Overlocking

Hi,
I have installed Vengeance Kernel, but in android overclock max slider is 800Mhz (phone is rooted). What should i do more to achieve 1Ghz overclock?

lukhoracy said:
Hi,
I have installed Vengeance Kernel, but in android overclock max slider is 800Mhz (phone is rooted). What should i do more to achieve 1Ghz overclock?
Click to expand...
Click to collapse
As of Vengeance kernel version 1.43 overclocking has been removed for the Miro. To overclock you need kernel version 1.40 or earlier.

where can i download it?

lukhoracy said:
where can i download it?
Click to expand...
Click to collapse
I don't believe that you can anymore, try getting in contact with the dev of the kernel to see if they can get one. You shouldn't need to overclock now though, the tweaks what have been added to the kernel make it just as good at normal clocking as it is overclocked.
My bad, you can still download it from the devs MediaFire account. Here is the link http://www.mediafire.com/download/rr5mnzl5pmdal6h/Kernel_Vengeance_Mesona.zip
You still shouldn't need to overclock though.

Lock and unlock bootloader ?
Sent from my ST23i using xda app-developers app

Only unlocked
Sent from my potatoe

OC Kernel

Anyone who knows about of kernel for p3100 other than blackhawk. Works fine but heats my device.
Thanks in advance.
Sent from my GT-P3100 using xda app-developers app

OCing will overheat your device, cuz you are making the CPU do more than what it is supposed to do.
It ain't the kernel. Don't OC, if you can't handle the heat.

All current overclock/undervoltage enable kernel around here based on blackhawk's patch, ported from cmenard's 3.0.8 kernel source code for AOKP.

Thanks.
How about the 3.0.39 dhollmen kernel, it does not heat my device as much..
Sent from my GT-P3100 using xda app-developers app

vehvariya said:
Thanks.
How about the 3.0.39 dhollmen kernel, it does not heat my device as much..
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I'd give the AGNI PureCM/PureStock kernel a shot, its my preferred kernel at the moment, use whichever depending if your device is on stock based firmware and CM version if you're on a CM based rom, bundled with it is the Boeffla Config app, in this app you can adjust your core voltage, (if the undervolt settings here arent good enough, you can get an app like SetCPU to do it in) , also, you can set the GPU OC while you're at it, i run 1350mhz on my CPU and 512mhz on my gpu, smooth and snappy, hardy heats up, works like a charm, you might like it!