Related
Well, on my Inspire I have flashed a custom rom that gives me up to a 1400 score on my Quadcore tests, yet I see other people hitting 2000-2500, what am I doing wrong? I'm using Core Droid v5.0 with a flashed radio that speeds up my download and upload speeds. Do you guys have any advice on how to speed up my Android?
And by the way, yes I do have set CPU and I have the settings on Max (1024000) and on Minimum (245761) I also have set on boot ticked along with profiles to save battery life. Any help is appreciated.
Sincerely,
RootTheNoob
Are you running a kernael that can be overclocked?
How can I tell of it can be overlooked, and I'm pretty sure I am its the default core Droid Rom, or do I have to install the kernel separately as well?
Sent from my Desire HD using XDA App
The default CoreDroid kernel isn't overclocked. Also if you have an overlooked kernel, setcpu would let you push past 1ghz.
Sent from my Inspire 4G using XDA App
I think you can use the leedroid kernel with coredroid can't you? If so, I'm using that one. It will overclock to 1.8. I only run at 1.2 though.
see post 957:
http://forum.xda-developers.com/showthread.php?p=12123867&highlight=leedroid#post12123867
So what do I set it to to overclock it?
First you have to floash the kernel. The you use the slider in set cpu to overclock.
How do I flash it?
Sounds like you have some reading to do. Download the kernel to the root of your SD card. Then from ROM manager use CWM to flash rom from SD Card. DO A BACK UP FIRST THOUGH. Read the first few leedroid posts and that will help
No, I know how to flash things but what kernel do I use?
What kernel do I use with Core Droid?
http://leedroid.ftp.rshost.eu/DHD-Kernels/
it is the 2.2.9. Check his post here and it will tell you what you are getting
http://forum.xda-developers.com/showthread.php?t=991848
Try the Inversely ROM...sure its stock based but the kernel can be oc'd to 1.8.... at 1.5 I got over 2600 and at 1.8 I got a 3309 and could do better sub some tweaking...right now though kernel is not a separate flash package.
Sent from my Desire HD using XDA App
Um..should be Ingersoll ROM.
Autocorrect fail....
What also helps is be fully charged...do your quad right after fresh boot and stop/shutdown all background processes you can..that's when you get best score.
Sent from my Inspire 4G using XDA App
Edit: hey he just posted his kernel ad a separate package...will make things interesting.
Guys, none of those kernels worked , I had to restore my Android to a previous backup.
Anything I can do?
Sent from my Desire HD using XDA App
Coredroid 5 is based off the the leaked GB rom no custom OC kernels are available. 1500 is about what I get with that rom also. If you want higher quadrant scores you need a froyo 2.2 based rom and kernel.
RootTheNoob said:
Anything I can do?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You'll prolly have to download a Rom with an oc kernel and wipe everything before you install it.
May not be what you want to do...but might be the only way to get what speeds you're wanting.
Otherwise...you'll have to wait till there's an oc kernel for the Rom your using.
yelp there isnt Oc of the core with gingerbread.. they do a 2.2 with oc. i havent done those yet cause i do like this gingerbread.. Im just going to keep with this V5.0 MIUI guys have the OC kernal for their gingerbread but they have more steps than i wanna deal with.
I use the SetCPU on the HTC Sensation 4G, it looks like it only scaling the cpu0. I am overclocking it to 1.5GHz but when I query the cpu frequency I don't see it on cpu1.
can somebody run the fallowing lines on adb shell to see if the scaling works for you?
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq
cpu0 gives 1512000 for me but cpu1 gives 1188000
ps cpu1 goes idle and this file becomes unavaliable, I run linpack run multi-thread just before I query the cpu1.
Sent from my HTC Sensation 4G using XDA App
How did you even get the Setcpu to recognize the sensation's 1.2ghz? How did you detect the device?!
Knucklessg1 said:
How did you even get the Setcpu to recognize the sensation's 1.2ghz? How did you detect the device?!
Click to expand...
Click to collapse
Custom kernel but setcpu definitely isn't working right with them either. Still not 100% compatible with our asynchronous cpu.
Sent from my Leedroided Htc Sensation 4g!
dr.m0x said:
Custom kernel but setcpu definitely isn't working right with them either. Still not 100% compatible with our asynchronous cpu.
Sent from my Leedroided Htc Sensation 4g!
Click to expand...
Click to collapse
I have a custom kernel that supports 1.8ghz. but setcpu only allows 998 to be the maximum when i click nexus one/snapdragon. I don't know what other options i have.
If you have a custom kernel that supports it (most do i think) setcpu should have an option to autodetect. You shouldn't have to select a device. If autodetect isn't available try uninstalling setcpu and reinstalling it. None of the device selections will work for us because our device/chipset isn't supported for manual selection (yet).
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
BonesRed said:
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
How easy is it to employ the OC Daemon and a kernal for it? Is it something we can just DL to out SD card?
Yes Dude, just flash a custom rom. If you're on a 2.3.3 based rom there's plenty of custom kernels and if you're on a 2.3.4 based rom just flash The Unity V6 or V7 kernel which should come with the virtuous OVERCLOCK Daemon included as part of the flashable.zip that you can find in the Leedroid ROM's thread in development.
Sent from my HTC Sensation 4G using XDA Premium App
BonesRed said:
If You're using a custom kernel then delete set cpu and use an OC Daemon like the Virtuous Daemon with Unity Kernel or user Android Rev HD and Mike's OC Daemon with any compatible custom kernel -- which depends on if you're using a 2.3.3 or a 2.3.4 ROM.
How that helps d0oD
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
Great info, thanks.
Btw, love your avatar.
Sent from my HTC Glacier using XDA Premium App
I just set OC to 1890Mhz
Cpu0 is at 1890
and when i ran linpack and got Cpu1 it was only at 1188.
Unity V5 on Senseless 1.3
I found this out before SOFF with the kernel module insmod. Even with the virtusous_oc demon, it still not working. I'm using 2.3.4 kernel with smartass, I wonder if that works on second core.
Sent from my HTC Sensation Z710e using XDA App
I just checked with insert coin 2.3.4 rom scaling governor of the cpu0 is smartass and governor of cpu1 is ondemand. I guess that does not work either.
cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
Sent from my HTC Sensation Z710e using XDA App
haha, I bet this phone is a single core really with a bit HTC fakery... could be why the cpu benchmarks are so bad lol
anarchyuk said:
haha, I bet this phone is a single core really with a bit HTC fakery... could be why the cpu benchmarks are so bad lol
Click to expand...
Click to collapse
hahaha, they also said its unibody when in fact its not...
Come on we need further testing, need to know the KERNEL, ROM, and what app you are using to control the CPU. CF-Bench is a longer test that stresses both cores.
If you look a the thread with Faux this is an issue with the ROMs or the OC apps, not the CPU, which the CPU in the phone is one of the only ones with an ASYMMETRIC CPU, meaning that the cores do not sync or lock to one another.
I am using set cpu with the unity v7 kernel and it works fine I am over clocked to 1.7ghz at full, when battery gets low goes down to 700mhz, when screen off about 500 mhz
when using stock kernal I used a manual settings using setCPU.txt obv cant over clock it but could under volt it to save battery when screen was off... if anybody wants my set cpu profile (txt file) I still have it floating about
you know what here is the file
place the file on the root of your sd card and in set cpu select manful from the device list.
remember stock kernel = no overclock but happy under clocking
Kurisu87 said:
I am using set cpu with the unity v7 kernel and it works fine I am over clocked to 1.7ghz at full, when battery gets low goes down to 700mhz, when screen off about 500 mhz
when using stock kernal I used a manual settings using setCPU.txt obv cant over clock it but could under volt it to save battery when screen was off... if anybody wants my set cpu profile (txt file) I still have it floating about
Click to expand...
Click to collapse
Kurisu87 said:
you know what here is the file
place the file on the root of your sd card and in set cpu select manful from the device list.
remember stock kernel = no overclock but happy under clocking
Click to expand...
Click to collapse
Ok you can't apparently pay attention to the point of this thread, all CPU apps, CPU Master, SetCPU, Virtuous Overclock all are able to overclock my CPU with the custom kernels, the problem is not me being able to overclock or not, its been tested by me many times with other kernels as well, and the OP that the Second Core is not sync and also not being modified by the governor as well. So all the CPU apps are only controlling the single core.
Does anybody tried CPU Master ? I think it's the OC utility that coredroid ROM suggest...
MasterKaiser said:
Does anybody tried CPU Master ? I think it's the OC utility that coredroid ROM suggest...
Click to expand...
Click to collapse
same problem exists, you can look at my discussion with Faux123
http://forum.xda-developers.com/showthread.php?t=1216197&page=7
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
FrenzyGr said:
Hello world. I'm running faux 004 but when I try to mess with my CPU limits with SetCpu etc. It only goes up to 1.51. What do I have to do to make higher speeds available?
Click to expand...
Click to collapse
try system tuner to overclock your processor...it works with faux 004 (also if you want performance change the governer to ondemand. its possible with system tuner too)
janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Each kernel has a range of frequencies built in, check the specification before you flash to get the range you want. All of the CPU management apps can only work within the ranges defined in the kernel.
sent from HTC Pyramid using Tapatalk 2
Try the new Bricked kernel. You can easily set the maximum and minimum frequencies simply by renaming the ZIP file. Use Recovery to flash. Setting CPU frequencies was never that easy!
I would say try bricked (like aayush mentioned). As he said, you can change the clock speeds by renaming the zip file (up to 1,944 Ghz, but only if your phone can handle it, so I would suggest that you first use "System Tuner" to test how high you can go with oc).
try searching for a kernel that supports hiigher clock rate
for example when flashing arhd it asks you about the kernel you want and not sure wich one can go to 1.7ghz or more
http://www.google.com/url?sa=t&rct=...xOjqCQ&usg=AFQjCNFPmCXITLZFHlmL0XotkhrO8YRVEQ
janarioo said:
the kernel wont have higer speeds try bricked kernel n cpu master free
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
I agree...with bricked kernel, you can set CPU min/max....
I tried Bricked at 1.83 and works like a charm. Tried at 1.99 but after a minute or so my phone rebooted so I'm back to the more stable 1.83 and the battery is amazing!
Sent from my HTC Sensation XE using Tapatalk 2
I'm on 4.0.4.. Stock ROM.. matr1x kernel..
The music player lags while the song is playing if I start something else like Whatsapp or browser..
As in the song literally lags..
I've tried oc'ing it to 1.4ghz..
And have plenty of free memory..
But still it lags..
Can someone please help..
Do I need to change the kernel? if so which one is good?
Sent from my Nexus S using XDA
siddhesh.raikar said:
I'm on 4.0.4.. Stock ROM.. matr1x kernel..
The music player lags while the song is playing if I start something else like Whatsapp or browser..
As in the song literally lags..
I've tried oc'ing it to 1.4ghz..
And have plenty of free memory..
But still it lags..
Can someone please help..
Do I need to change the kernel? if so which one is good?
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
i have no issues with this kernel, but if u have a nexus s and not a 4g i will advise you to not oc to 1.4, stay at 1.3/1.2 . cuz nexus s processor are diferent...
but if u think it is the kernel, flash another one, but that one should work perfect
Cascabreu said:
i have no issues with this kernel, but if u have a nexus s and not a 4g i will advise you to not oc to 1.4, stay at 1.3/1.2 . cuz nexus s processor are diferent...
but if u think it is the kernel, flash another one, but that one should work perfect
Click to expand...
Click to collapse
I Jus oc'ed it to see if it's a problem with the processor.. I don't oc it beyond 1.2..
I'm on the matr1x v20 cfs..
the further versions gimme freezes and bootloops..
Can you suggest any other stable kernel?
Trinity?
Sent from my Nexus S using XDA
Try raising voltages back to stock. Some phones can UV without rebooting but become far less efficient and unstable. Matr1x is undervolted by default.
Edit: See here for stock voltages.
Harbb said:
Try raising voltages back to stock. Some phones can UV without rebooting but become far less efficient and unstable. Matr1x is undervolted by default.
Edit: See here for stock voltages.
Click to expand...
Click to collapse
Thanks..
I'll try and get back..
Sent from my Nexus S using XDA
siddhesh.raikar said:
Thanks..
I'll try and get back..
Sent from my Nexus S using XDA
Click to expand...
Click to collapse
It definitely worked..
First I changed the voltages.. No lag.. Then..
Realized that the trinity kernel has the default values.. And its working fine.
guess it was the voltages..
Thanks..
Sent from my Nexus S using XDA
If you want to use matr1x. Try downloading voodoo sound.
Mdj is developing for our phone now Head over here to check the kernels;
http://rootzwiki.com/topic/27832-1906kernel-virtuous-v05-06-extreme-linux-308/
Please do not post any download links out of respect, just go to the thread.
no US T-Mo love.
I bet it will work with other bases
sent from a guy living in a van down by the river
Big_Den said:
Mdj is developing for our phone now Head over here to check the kernels;
http://rootzwiki.com/topic/27832-1906kernel-virtuous-v05-06-extreme-linux-308/
Please do not post any download links out of respect, just go to the thread.
Click to expand...
Click to collapse
I'm really hoping we see some T-Mo USA compatible kernels coming soon. All previous one's I've tried did not work, and usually broke Wifi, or never would even boot.
Also hoping that we see CM9/AOKP compatible versions as well.
Make a nandroid and flash the boot.img through fastboot, whats the worst that could happen?
Nice, GPU overclock. Guys, I'm going to try this on my TMOBUS device and report back whether it works.
This is looking good! Can't wait to hear whether or not it works on 1.84 TMO-US base. I can't use fastboot from my work computer or I'd test it myself.
Yeah, Im running it on Leedroid 2.1 with the 1.78 base. Will let the phone charge before testing it.
Wow, first NRGZ28 now mdeejay..one S is getting some major love from the big guys now! Starting to look like the HD2 forum in here
Sent from my HTC VLE_U using XDA
tgtoys said:
Wow, first NRGZ28 now mdeejay..one S is getting some major love from the big guys now! Starting to look like the HD2 forum in here
Sent from my HTC VLE_U using XDA
Click to expand...
Click to collapse
+1
Sent from my HTC VLE_U using xda premium
Been running V06X for a few hours now on the Virtuous One S v1.4.0 rom with the 1.70.666.1 base. Everything is silky smooth, wifi etc.. all working. Flashed it through fastboot.
Link to rom;
http://rootzwiki.com/topic/20859-romapr-21villes-seriesvirtuous-one-s-v140/
Heres a first time quadrant test running at 1.7GHz (can clock to 2GHz!) in spite of the S3 One S owners
I have one question: There was this IMPORTANT note where it said I had to flash a zip, but which should I flash if I'm on V5?
I suppose this will only work on Sense ROMS?
Link ://d-h.st/foy v1-v4 its said but I installed the zip with v5 kernel runs great!
Flash (CWM/TWRP) compatible with this kernel postboot script and thermald.conf for better preformance and battery safe.
Flashed this over 1.84 with success. Quadrant is a couple hundred points higher without over clocking.
Sent from my HTC VLE_U using xda premium
dooshbag45 said:
Flashed this over 1.84 with success. Quadrant is a couple hundred points higher without over clocking.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
What was you getting before?
yeahh thats great !!
This bumped my score to 5456 on first Quadrant run, nice OCed to 1890 mhz
Edit: Clocked it down again to 1674 mhz and still got 5452? Probably due to GPU OC or something
Habarug said:
This bumped my score to 5456 on first Quadrant run, nice OCed to 1890 mhz
Edit: Clocked it down again to 1674 mhz and still got 5452? Probably due to GPU OC or something
Click to expand...
Click to collapse
Nice, Heres one running at stock speed 1.5GHz - ondemand gov Mdj done an amazing job.
dooshbag45 said:
Flashed this over 1.84 with success. Quadrant is a couple hundred points higher without over clocking.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
How did you flash this? Mind telling us your steps.
Sent from my HTC VLE_U using Tapatalk 2