hey i have been using custom rom on my neo v ( jelly sandwitch v4.5) with nightelf kernel 2.6. since today there were no problems but now my phone is not being able to enter flashmode or fastmode even if i press back button or menu button during plugging of data cable. It just blinks once and then goes off and phone enters into charging mode. Also on lock screen when i try to unlock the screen by sliding m finger response does not sticks with the unlock line and i have to atleast ry 3 times to unlock it.Please some help .Thanks in advance
Related
Hi guys!
i have a problem today i got from sync notification about os update so i pressed yes it started to download and install then my phone powered off and i cant turn it on again .
when i press the power button and hold it the phone vibrated again and again i tried flushing os again (no first time) no help
when i cinnect the usb to phone without pressing return button the green light turns on automaticlly pls can any help me??
thnx for trying to help but i fixed it
i boot relocked the phone and its ok )))))
can you access bootloader mode?If so download your phone's stock rom insert your sdcard into an sdcard adapter and flash it
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
when you connect your phone in flashmode green light should stay on (press & hold vol down then plug usb in)
it should show
"device connected in flashmode"
IF you want fastboot mode
when you connect your phone in fastboot mode blue light should stay on (press & hold vol up then plug usb in)
NOTE-it should actually do bootloops....not sure why red light
callum123457 said:
Hi my sony xperia E c1505 is not turning on it flashes red when hold power button it is not dead of battery fully charged left over night I unlocked the bootloader then i tried flashing it it says please turn on your phone and enable USB-debugging mode my phone can not turn on cause im in the bootloader after that I did somthing else but now i press power button just flashes red lights i am able to get in to flash mode and fastboot however i try flashing it but its says please enable USB-debugging is there a way to fix this and by the way im using flash tool and i have tried to update it with sony xperia update tool.
Click to expand...
Click to collapse
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
sohailferdous said:
Sometimes flash tool, while flashing tells me to turn on usb debugging (although its already on). So what do I do? Wait. After ten minutes(approx), device disconnects automatically and then flashtool requests me to connect in flash mode. So I disconect my usb cable and connect it again in flash mode and voila! flash begins. Worked for me, hope it works for u too..
Sent from my Xperia E dual using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes thats a common mistake
on flashmode connect phone in flashmode only when asked (or like you said ...you will have to do twice)
on fastboot mode your phone has to be connected in fastboot before selecting the fastboot mode
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
GeoH85 said:
I'm having very similar trouble, i flashed FXP CM10 a little while ago until the phone stopped receiving a signal (which has happened a few times using CM10), unfortunately the battery died before i got home to flash it again. 3 days and 7 hours later and the battery still hasn't charged, i've managed to boot into android very quickly while it's connected to a wall charger but i get nothing at all if i try and connect in flashmode or fastboot.
Is the battery dead? Is there something i'm probably missing? I figured this might go to someway with hoping the OP.
[Edit: Good news! I've plugged into USB and i can get to the battery bar with the power symbol, maybe i can get to flashmode after all!]
[Edit 2:] Noticing the phone had just enough power to get to the battery/power symbol screen, held down the volume button for about a minute till it went through that cycle and managed to get it into flashmode, installed stock and plugged it into the wall. 5 mins later i hit the power button and it's working again! Hooray!
Click to expand...
Click to collapse
use jim34 cm10 with hsr0 kernel....FXP IS CRAP for daily use
don't connect your phone to the pc until flashtool asks you to. I get that thing sometimes when I reflash a rom or kernel
Sent from my ST21i using Tapatalk
Hi Guys. I don't know that this the right place for this thread or no. sorry.
i have a xperia v device and its rooted. i installed philz touch cwm 6 on it and when i wanted to install cyanogenmod rom on it i wiped everything first, but in the middle of the installation it gave me this error: your device is mint. [status 7]
when i turned off the phone, i did everything to enter the recovery mode: pressing vol+, pressing vol-, holding vol+, holding vil- and...! but no fortune
and now when i turn it on it shows me the SONY logo and then a black screen.
I found the solution to [status 7] error, but i need to enter the recovery mode fisrt.
So please tell me, is there any other way to enter the recovery mode on rooted xperia V?
Thanks.
any sugestion is appreciated
I have an XPERIA E1 D2005 that has a LOCK PATTERN, so I was trying to do a hard reset but every method to enter fastboot mode won't help. Vol- or Vol+ with power does not help or both with power it does not help as well. Pressing the vol up does not coz I can't get the orange or blue light. Entering *#*#73........ Says the number you dialled is not an emergency number. Does anyone have help for me as I was repairing a cracked screen.
Hi all,
i have been attempting to root my Z5 dual, i have unlocked the bootloader no issues.
but when i got to the stage of trying to flash TWRP.img thats where i ran into issues, it flashed ok - but now my phone won't boot - it is just stuck on the white sony screen.
the only way to turn it off is to hard reset ( hold power button and the volume buttons until it vibrates 3 times ) - then it will power on if i hold down the volume key and press the power button - or plug it into a wall charger..
when it does turn on it gets to the sony screen - the LED goes white, then amber for a second or two then the LED turns off..
im not too sure what to do now guys - my laptop wont pick up my device any more so it seems as though i have soft bricked it. i have also tried the P.c companion thing also but it says i have modded software so it can't do it lol.
help me pls
Hi,
If you already have installed the z5 drivers on you laptop (i assume this is the case because pc companion is installed and detect your phone), guess you can try to flash a stock Rom of your contry using flastool, your laptop will normally detect your z5 cause you connect it thanks to a special manipulation (vol - + connexion while button is maintained) .
Try this if everything goes great, it will fix the bootloop issue.
I got the same prob and eveb worse (battery 0% and wasnt charging) i hard rest it ( vol up+ power) and left it for 10 seconds then i pluged into my laptop while holding vol down and suprisly my laptop detected my phone and i was saved ! But i was scared about the flashig procsess as my battery was 0% lol
Baradoura said:
Hi,
If you already have installed the z5 drivers on you laptop (i assume this is the case because pc companion is installed and detect your phone), guess you can try to flash a stock Rom of your contry using flastool, your laptop will normally detect your z5 cause you connect it thanks to a special manipulation (vol - + connexion while button is maintained) .
Try this if everything goes great, it will fix the bootloop issue.
Click to expand...
Click to collapse
hi there,
thanks for your response,
my phone is no longer being recognized by my laptop - i have tried a bunch of things - it doesn't boot loop any more - if i turn it on ( well attempt to) it will just show a no battery picture - out of 20 times of trying to get it into fast boot mode it the green LED will flash for a second or so and then it will turn off again.
i have tried to leave my phone on charge for a whole weekend to see if it worked - but it still shows that it has no battery
Branga said:
hi there,
thanks for your response,
my phone is no longer being recognized by my laptop - i have tried a bunch of things - it doesn't boot loop any more - if i turn it on ( well attempt to) it will just show a no battery picture - out of 20 times of trying to get it into fast boot mode it the green LED will flash for a second or so and then it will turn off again.
i have tried to leave my phone on charge for a whole weekend to see if it worked - but it still shows that it has no battery
Click to expand...
Click to collapse
Flash your phone firmware with Flashtool and you would solve a problems.
Sent from my Sony Xperia Z5
Allek84 said:
Flash your phone firmware with Flashtool and you would solve a problems.
Sent from my Sony Xperia Z5
Click to expand...
Click to collapse
thanks for your response - i have been trying but my phone wont get into fast boot mode / flashtool wont pick up my phone even if my p.c does
Branga said:
thanks for your response - i have been trying but my phone wont get into fast boot mode / flashtool wont pick up my phone even if my p.c does
Click to expand...
Click to collapse
You dont need put your phone in fastboot mode than flashmode.
Sent from my Sony Xperia Z5
flashmode not fastboot mode . make sure u install flashtool drivers and fastboot drivers and ur devices drivers as well. dont skip this just cause u think u did it. if you are on a windows pc windows 8 - windows 10 , you have to disable signature verification in order to install the drivers. if you dont know about that , tell me to explain . apart from that , what commmand did you use to flash twrp? fastboot flash boot twrp.img or fastboot flash recovery twrp.img? if you did the first , thats why it doesnt boot. and apart from that , can you at least enter the recovery ?