Related
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
I don't have it, but I can look into it...
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
FlynnErik said:
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
Click to expand...
Click to collapse
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
I did a back up after I rooted with CWM
Bibicp said:
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
Click to expand...
Click to collapse
So is my backup going to be rooted? Or will it be the stock? I am currently rooted stock 4.0.4.
Btw, I have found no information about the update anywhere on the net. Maybe they accidently did a push to us, and pulled it back?
Should I wipe cache, dalvik and FDR before I flash the firmware from those sites or use the backup I made already? (which I am unsure if I should even use since idk if it will be rooted or not lol)
I wasn't going to update till it was time to get JB, but this update that vanished is intriguing enough I might lol
As i know yes when you restore backup with cwm the result will be rooted also as the cwm takes image of the system when doing backup and as you when doing backup was rooted so when restore this backup you will be still rooted if you flash via odin no need to wipe cash and dalvik cash i never read anyone doing this
Even if you do this wipe no harm at all
Sent from my GT-I9100 using xda app-developers app
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
There's several reasons why this may happen
Bibicp said:
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
Click to expand...
Click to collapse
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
FlynnErik said:
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
Click to expand...
Click to collapse
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Awesome!
Bibicp said:
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Click to expand...
Click to collapse
So the one on the site even though its XAR is us? Can I ask why we have that tag? Not something like US or etc? I mean I don't care, just kinda curious since that would make it more simple to know which region gets what, at least for me it would lol.
Thank you so much for the help and the knowledge, I figured I would end up with stock recovery, which is why I wanted to make sure about what if something goes wrong.
As a side thought, where does the backup that CWM makes located? Can I copy and paste that on to my PC so I always have a back up handy? (I would sync it into the cloud). Can I flash that with odin down the road? Or is that only a CWM usable file?
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Gizmo said:
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Click to expand...
Click to collapse
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Bibicp said:
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Click to expand...
Click to collapse
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Gizmo said:
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Click to expand...
Click to collapse
Alright, tell me if you notice anything different.
Nice
good!
Im downloading it now. Ill post it when its rooted and deodexed
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
I tried updating it once with KIES and it got to a point and froze on the screen. I had to force the tablet to shut down and rebooted and the tablet was OK. Being a glutton for punishment I tried again with KIES and the LH1 update successfully updated my GT2 7 and the About screen confirms it. Directly after installing and rebooting I started getting error messages about Chrome crashing. I uninstalled Chrome browser and reinstalled it and all is well. No other problems. Do NOT really notice ANY difference at all.
The only problem I have is that NOW I have decided that I would like to root my GT2 7 and I am NOT sure the methods I see out there will work with the P3113UEBLH1 update.
Does anyone know if my GT2 7 - P3113UEBLH1 can be rooted safely??
grobin
I dont think IT is better than CM9
RomsWell said:
Im downloading it now. Ill post it when its rooted and deodexed
Click to expand...
Click to collapse
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Bibicp said:
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Click to expand...
Click to collapse
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
RomsWell said:
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
Click to expand...
Click to collapse
Sorry for the question, but what do you mean comfirmed OTA? Once kies told me about the UEBLG5 update, I couldn't install it with kies as it was lagging.
Next day I found it on the OTA update.
This one showed on kies for a day, then next day neither kies or the OTA udpates showed there was an update so it probably got pulled back?
I have been searching on the forum and Google but no answer. I had a Sprint Galaxy S3 and it was rooted with custom recovery Clockworkmod. After an update was available I could not install the update, failing with the message "verification failed" when trying to apply the official update file. I couldn't find an answer so I went back to stock recovery.
Now I have a verizon S3 and I would like to back up an image of my phone with clockworkmod but I would like to be able to update, especially with the looming jellybean update coming soon. Did I miss a way to install the updates to the official rom with clockworkmod? Or was it simply not possible.
moreisbetter said:
I have been searching on the forum and Google but no answer. I had a Sprint Galaxy S3 and it was rooted with custom recovery Clockworkmod. After an update was available I could not install the update, failing with the message "verification failed" when trying to apply the official update file. I couldn't find an answer so I went back to stock recovery.
Now I have a verizon S3 and I would like to back up an image of my phone with clockworkmod but I would like to be able to update, especially with the looming jellybean update coming soon. Did I miss a way to install the updates to the official rom with clockworkmod? Or was it simply not possible.
Click to expand...
Click to collapse
With most custom Roms...being able to do OTA updates is blocked because it could interfere with the rooted Rom you are running...its more or less a safety feature for that purpose. If you want to get the new Jelly Bean OTA update, you will have to flash your device back to unrooted stock and it should work just fine...as long as ur rooted, you wont be able to, if im not mistaken.
Thats true, and there is the whole bootloader thing! Now that we have all hacked away our bootloaders, the OTA just won't happen. Hopefully an easy relock becomes available for the vzws3 before that update is released, but I wouldn't panic - big red will probably release it to us after everyone else has gotten it and out phones are outdated! In general though, within a week or two of an official large release, the amazing devs on this site will have a downloadable version available for us to manually install.
If you have modded your phone, never try to take a OTA update. At the least you will lose root abilities. At the worst, potential bricking of your device.
Usually before, lol, if not just after a OTA, the devs have working release for our devices.
Take it easy, relax.
Hey guys, been a long time lurker here and just encountered my first issue, so made an account to hopefully get some advice.
I received the note 10.1 8010 (UK) as a gift for Christmas. I was disappointed to see it was running 4.0, when devices like the Nexus 7 are already on 4.2. And Germany had the 4.1 update for over a month. Samsung as always refuse to give a solid answer.
I followed a guide to install the German 4.1.1 update. I first installed the German version of ICS via Odin. I then applied the update.zip from here:
HTML:
d-h.st/lLB
Prior to this, I rooted the device, but I believe the above process removed the root anyway.
After my device rebooted, the S Pen isn't working at all. It recognises when I take the pen out, but I cannot use it. It doesn't do a thing. I've read about 1,000 forum threads and cannot find an answer, as to how I can get it working again.
I tried deleting cache and user data, then reapplying the update.zip to no avail.
When I boot up in to recovery mode, it does come up with a message about CSC and then the little drop falls over and I have the usual options.
Any idea what I need to do, to get my S Pen working again? Or what I've done wrong?
Many thanks
This is how I rooted the device.
HTML:
rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-easiest-methodcwmmethod-2/
I have a feeling this is the "root" of the issue. I'm not sure how to remove it.
I know previously I wasn't able to change my CSC via CSC switcher, but I am now.
So I guess installing the German ICS and then update.zip, hasn't completely undone whatever rooting it above did.
Removed the custom recovery and the pen started working again. At this point I was back on ICS, trying to see whether JB was the issue.
Now update.zip will not apply, despite the fact I'm on the German ICS stock. I get an error status 7 in package.zip.
This is the worst experience I've ever had, with any device in my life.
If this wasn't a present I'd have smashed it in to tiny pieces. I will never buy a non Nexus device ever again.
I know this may seem trivial, but when I'm running 4.2 on all other devices, I don't want to be stuck on 4.0 with my brand new tablet.
Samsung have really put me off ever buying their devices in the future.
Tehkseven said:
Removed the custom recovery and the pen started working again. At this point I was back on ICS, trying to see whether JB was the issue.
Now update.zip will not apply, despite the fact I'm on the German ICS stock. I get an error status 7 in package.zip.
This is the worst experience I've ever had, with any device in my life.
If this wasn't a present I'd have smashed it in to tiny pieces. I will never buy a non Nexus device ever again.
I know this may seem trivial, but when I'm running 4.2 on all other devices, I don't want to be stuck on 4.0 with my brand new tablet.
Samsung have really put me off ever buying their devices in the future.
Click to expand...
Click to collapse
This a pretty bummer situation. Sorry you're dealing with it.
I find this interesting, as I followed the exact same procedure to root as you. I haven't experienced any pen issues though.
Could it be the 4.1 you flashed?
This is one of my fears too, so I really hope this can be solved.
I finally managed it.
I downloaded a different German ICS from a different guide and this time it worked no problems.
The one that worked, had a file name: N8010XXALI3_N8010OXAALI3_DBT
Update.zip worked first time after I installed the above ICS.
Hope that helps.
hi, i just got my tablet back from repairs and i asked them to install ICS if they had to reset the firmware, and they did. now my problem is that i want to update to the 4.2 JB that came out (while my ASUS was in repairs for 3 WEEKS) but i can't. when i try to update, it just says "no update found". i have already talked to their "experts" and he just kept saying "oh, it come to your tablet when it ready" I have also tried to download the update from their site, but then when it tells you what version you need by looking at the build number, i noticed mine was IML74K.WW_epad-9.4..... and shouldn't it be something more like US_epad-9.4.....? i tried to install it anyways but it never detected it on the sd card. so then i tried to just use fastboot and flash it to the device, but when i entered the boot menu, THERE WAS NO OPTION!! In fact, there was only 2 options, wipe data, and boot android. there was no usb or RCK (or whatever it was) option. i also have several other problems, but i'll leave them for another day and another post, sense they may be related
Any help would be awesome sense it's obvious I'm not going to get much help from ASUS. Let me know if you need any other info too!
Thanks in advanced!!
Jake
Snakester15 said:
hi, i just got my tablet back from repairs and i asked them to install ICS if they had to reset the firmware, and they did. now my problem is that i want to update to the 4.2 JB that came out (while my ASUS was in repairs for 3 WEEKS) but i can't. when i try to update, it just says "no update found". i have already talked to their "experts" and he just kept saying "oh, it come to your tablet when it ready" I have also tried to download the update from their site, but then when it tells you what version you need by looking at the build number, i noticed mine was IML74K.WW_epad-9.4..... and shouldn't it be something more like US_epad-9.4.....? i tried to install it anyways but it never detected it on the sd card. so then i tried to just use fastboot and flash it to the device, but when i entered the boot menu, THERE WAS NO OPTION!! In fact, there was only 2 options, wipe data, and boot android. there was no usb or RCK (or whatever it was) option. i also have several other problems, but i'll leave them for another day and another post, sense they may be related
Any help would be awesome sense it's obvious I'm not going to get much help from ASUS. Let me know if you need any other info too!
Thanks in advanced!!
Jake
Click to expand...
Click to collapse
The stock 4.2 (10.6.1.8) has an assert that will only allow it to be installed from 10.4.2.20. If memory serves me correctly ICS does not have the usb icon until unlocked. Also the new 4.2 bootloader only has three icons - no usb.
Are you unlocked? Most units that come from repair are not and can't be unlocked.
With all the unresolved issues on 4.2 I would not put it on my tablet at this time. There are many bricks waiting for a resolution.
thanks, that helped fix it!
tobdaryl said:
The stock 4.2 (10.6.1.8) has an assert that will only allow it to be installed from 10.4.2.20. If memory serves me correctly ICS does not have the usb icon until unlocked. Also the new 4.2 bootloader only has three icons - no usb.
Are you unlocked? Most units that come from repair are not and can't be unlocked.
With all the unresolved issues on 4.2 I would not put it on my tablet at this time. There are many bricks waiting for a resolution.
Click to expand...
Click to collapse
I downloaded the 4.1 firmware and it detected it and installed it right away. I don't know why they couldn't tell me that when I called, but it fixed the problem. And I know you said not to, but I installed 4.2 anyways because I was too curious, and I have personally found no problems and like the new features.
Hi guys, a couple of months ago I've rooted my new S2+ and after Alex posted the new 4.2.2 I've flashed my device with RDS_GT-I9105P-XEO-I9105PXXAMC2 (topic here GT-I9105/I9105P Stock Prerooted Firmware Without loss of warranty(4.2.2) http://forum.xda-developers.com/showthread.php?t=2334103).
So far it is working perfect! This week I've received a notification, that there is a new update available OTA for my device, so I've decided to download and install it. I've downloaded it, the phone restarts and starts to install the "new update", but at 25% shows an error (the Android guy wearing the red triangle etc. and reboots automatically).
After the restart the OS boots normally and is working OK as previous.
My question is: Since my phone has a prerooted stock FW (4.2.2) and is rooted at the same time running CWM, why I can't install the latest updates OTA?
If CW is causing this, why am I able to get the OTA update notification?
Thanks for the replies.
boyansky78 said:
Hi guys, a couple of months ago I've rooted my new S2+ and after Alex posted the new 4.2.2 I've flashed my device with RDS_GT-I9105P-XEO-I9105PXXAMC2 (topic here GT-I9105/I9105P Stock Prerooted Firmware Without loss of warranty(4.2.2) http://forum.xda-developers.com/showthread.php?t=2334103).
So far it is working perfect! This week I've received a notification, that there is a new update available OTA for my device, so I've decided to download and install it. I've downloaded it, the phone restarts and starts to install the "new update", but at 25% shows an error (the Android guy wearing the red triangle etc. and reboots automatically).
After the restart the OS boots normally and is working OK as previous.
My question is: Since my phone has a prerooted stock FW (4.2.2) and is rooted at the same time running CWM, why I can't install the latest updates OTA?
If CW is causing this, why am I able to get the OTA update notification?
Thanks for the replies.
Click to expand...
Click to collapse
that is because it is a modded firmware
safariking said:
that is because it is a modded firmware
Click to expand...
Click to collapse
I understand that the FW is modded, as the previous one (4.1.2), which I've downloaded from here and installed on my G2+. But with 4.1.2 at that time I wasn't able to check for any updates for my OS. Every time I've checked manually for updates, the OS gave me error message, that this is not possible. And now with 4.2.2 I am not only able to check if my FW is the latest, but also to download and install 1/4 of the updates. I am trying to find the algorithm here.
boyansky78 said:
I understand that the FW is modded, as the previous one (4.1.2), which I've downloaded from here and installed on my G2+. But with 4.1.2 at that time I wasn't able to check for any updates for my OS. Every time I've checked manually for updates, the OS gave me error message, that this is not possible. And now with 4.2.2 I am not only able to check if my FW is the latest, but also to download and install 1/4 of the updates. I am trying to find the algorithm here.
Click to expand...
Click to collapse
I will say it again
It is not possible to check for updates because the Firmware is modded and not original anymore that's why!!!
Hi "safariking",
In the current situation we have two identically modded FWs, but a different outcome.
It's very nice of you to take the time to answer my question so fully That's why I'd like to thank you for the effort. Herewith I am closing the topic.
Cheers.
No probs guy i will repeat myself 100 times no problem
Verstuurd van mijn GT-I9105P
safariking said:
No probs guy i will repeat myself 100 times no problem
Verstuurd van mijn GT-I9105P
Click to expand...
Click to collapse
chill down everyone safari bro,this guy trying to say he got updated with mod fw,just when reach certain percent,the downloaded file seems corrupted. Now i understand mod fw can't even received the ota file,but how this process is allowed, and what happened with the ota file he downloaded?
either way,it's pointless,1st the phone fail to update completely(stuck at 25%), 2nd i don't think this problem can be solved.
cheers everyone~ :highfive:
nickchk said:
chill down everyone safari bro,this guy trying to say he got updated with mod fw,just when reach certain percent,the downloaded file seems corrupted. Now i understand mod fw can't even received the ota file,but how this process is allowed, and what happened with the ota file he downloaded?
either way,it's pointless,1st the phone fail to update completely(stuck at 25%), 2nd i don't think this problem can be solved.
cheers everyone~ :highfive:
Click to expand...
Click to collapse
Hi Nick,
Thanks for your reply. You are reading my mind. The issue is really interesting & I think it is worth discussing this.
Safari is right, when he says that FW upgrade OTA for customized ROM is not possible. This is of course true and no one has ever doubted it. This is why when I had the 4.1.2 installed on my G2+ no update was even possible. Droid detects immediately, that the OS has been modified and that you are not running stock ROM.
Okay, so far so good.
Now I have pre-rooted 4.2.2 installed on my phone. When I hit the "Check for update button" it detects that my OS is genuine (although it is not), downloads the whole update package (see screenshot), restarts the phone (part of the update process) and starts installing the update. When the installation reaches 25%, an error message appears saying, that an error has occurred. The phone restarts and loads the "old" OS.
I have tested this a several times and it always hangs on 25%.
The question is NOT why I CAN'T install OTA updates on modified ROM. The question is why I CAN download and install OTA updates on modified ROM.
My suggestion is that:
ROM 1 (4.1.2) had a modified kernel. That's why the OTA updates were not possible.
ROM 2 (4.2.2) is pre-rooted. And I assume it is just stock FW (kernel not modified) with few modifications in the user permissions. This would explain the OTA update and why it reaches download mode and hangs on 25% of the installation.
I hope this brings more clarification to the situation and this would be useful to all members of the forum.
Cheers!:highfive:
I have randomly come across and read posts and topics on this in the other devices' forum.
If I remember correctly, it is the custom recovery, i.e Cwm or twrp that blocks or interrupts the OTA process. 2 reasons why: you'll lose root access if the update went through. Secondly, if a user freezes or uninstalls stock apps like S Voice, Chat On etc, there will be trouble.
There are some ways of allowing an OTA to get pass a custom recovery. I think TWRP has this feature. Again, I stand corrected here lol.
Heard of OTA Root Keeper but no idea how it works
Sent from my GT-I9105 using xda app-developers app