i installed cm7 on my g2x works fine for about 3 days until i turned off then when i turned it on it never passed the 2nd lg logo.i go into clockwordmod recovery(power + volume down) and i cant find a way to fix it ..anyone now how to fix it plz help me..
Did you install a different kernel too? Did you make a backup before flashing new rom?
Sent from my LG-P999 using xda premium
kernel i did not, is stock,and yes i did a back up before flashing new rom.i cant find any info or related problems not sure why this happened
Cyrax_07 said:
i installed cm7 on my g2x works fine for about 3 days until i turned off then when i turned it on it never passed the 2nd lg logo.i go into clockwordmod recovery(power + volume down) and i cant find a way to fix it ..anyone now how to fix it plz help me..
Click to expand...
Click to collapse
Could have been an app you installed preventing it from booting properly, try to make a nandroid of your current rom then restore back to your original rom and let us know if it boots. If it does, it's most likely something on your rom. If it still doesn't boot that's more of a hardware issue.
Did you properly wipe, did you install a rom, you have to tell more information then just saying it wont boot could be anything why it wont boot answer what you did before you got to the point you are in now and then we can help.
Sent from my LG-P999 using xda premium
I fixed my phone I appreciate everyone's help.thanks everyone
Sent from my LG-P999 using XDA App
Cyrax_07 said:
I fixed my phone I appreciate everyone's help.thanks everyone
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
You might want to tell people what the issue was and how you fixed it. Simply saying, "it's fixed," doesn't help people.
Sent from my LG-P999 using xda premium
does any1 know if it would work ? aren't they pretty much the same phone?
its available at clockworkmod.com/rommanager
thanks
ekoms420 said:
does any1 know if it would work ? aren't they pretty much the same phone?
its available at clockworkmod.com/rommanager
thanks
Click to expand...
Click to collapse
can someone try this?
devs are already on it in development section. It should be as simple as changing the ramdisk but there could be many more issues.
Sent from my LG-P999 using Tapatalk
Thanks. I love that you replied, don't always get replies on this forum.
Klathmon said:
devs are already on it in development section. It should be as simple as changing the ramdisk but there could be many more issues.
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Which devs are working on it? Just wondering
Sent from my LG-P999 using xda premium
moeahmad1995 said:
Which devs are working on it? Just wondering
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Isnt it out already? I saw it on rom manager, i did not flash it from manager though, i am still using the one from nvflasher since i saw the version number are the same anyways lol.
I am interested in this too, anyone tried it yet?
moeahmad1995 said:
Which devs are working on it? Just wondering
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
some of the guys are working on it in This thread.
It currently boots, however is not working as an actual recovery at this point.
you can try flashing it, but do not use it to make any backups or flash roms.
There is a modified version floating around the forums that has touch CWM working for G2X 5.8.1.3. I have backed up and restored and it gave no problems.
http://forum.xda-developers.com/showthread.php?t=1566681
Sent from my LG-G2X
CM9-sk3 w/ Harsh P999-4
donjuanito909 said:
There is a modified version floating around the forums that has touch CWM working for G2X 5.8.1.3. I have backed up and restored and it gave no problems.
http://forum.xda-developers.com/showthread.php?t=1566681
Sent from my LG-G2X
CM9-sk3 w/ Harsh P999-4
Click to expand...
Click to collapse
dont go flashing that just yet... still not 100%
mount points are screwed up, so while it might look and act working, you might be restoring your dalvik cache to /system...
just hang on a bit longer, Rusty is getting close, but he can only do so much on his own without a g2x to test it himself.
Ok so I just Rooted my phone recently and everything is ok but one thing is messed up is. There is no audio. Is there any way to fix this? And if so then how can i fix it? And suggestions will help thanks for your time!
Also sorry if this was asked and answeres somewhere else before. I just couldnt find it anywhere.
Sent from my Desire HD using xda app-developers app
Avacell said:
Ok so I just Rooted my phone recently and everything is ok but one thing is messed up is. There is no audio. Is there any way to fix this? And if so then how can i fix it? And suggestions will help thanks for your time!
Also sorry if this was asked and answeres somewhere else before. I just couldnt find it anywhere.
Sent from my Desire HD using xda app-developers app
Click to expand...
Click to collapse
The post says "Our DHD is NOT 100% compatible with the Euro DHD. A rom using their kernel will yield no sound. The downgrade rom is one of those, so you must either flash a compatible rom after this procedure is done, or you must flash a compatible kernel (linked below) to get sound back."
I found this quote above, it seems the the downgrading rooting process kills audio due to uncompatible kernel install. In order to get audio back you need to flash a compatible rom or kernel (DHD or Inspire 4G)
I'm sorry I actually already solved the problem. Thanks for your help though.
Sent from my Inspire 4G using xda app-developers app
Hello,
This is my first post here so go easy
I am trying to install [ROM][ICS 4.0.4]Genesis - Stable Build1 - CM9/AOKP Hybrid on LG P999 with no success. I rooted using super one click and made a backup. I flashed 5.0.2.0 to the device and tried loading Mr. Apocalypse's build following every instruction to the letter. The install appears to work fine allowing me to choose options and I get to the reboot prompt fine. I answered the baseband question and opted for the harsh kernel.
After reboot I get the white LG logo then the display dims and there are light leaks of varying degree but nothing after that. I waited about 45 minutes the first time and have waited up to an hour with nothing. I have tried [ROM][CM9][JUL13-Build80] Domination with similar results. I get to the reaper kernel image after reboot and that's as far as it goes. I followed all the instructions to the letter and I have no idea what is wrong.
Anyone that has a suggestion, other than buying a better phone, please let me know. Is there another method I can try?
Thanks in advance.
With Genesis, install it with the stock kernel, then after the first boot load harsh separately. Some phones get a boot loop with harsh in Aroma
Sent from my LG-P999 using xda premium
Thanks
rtotheichie said:
With Genesis, install it with the stock kernel, then after the first boot load harsh separately. Some phones get a boot loop with harsh in Aroma
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I will give that a go, thank you very much for the advice. I will check in to let you know how it turned out.
Also, how did you flash CWM? If the answer is anything other than "NVflash" stop what you're doing and search in the dev section for NVflash
Sent from my LG-P999 using xda premium
rtotheichie said:
Also, how did you flash CWM? If the answer is anything other than "NVflash" stop what you're doing and search in the dev section for NVflash
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
+1 on this!
Sent from my LG-P999 using xda app-developers app
Yes Real Flash
rtotheichie said:
Also, how did you flash CWM? If the answer is anything other than "NVflash" stop what you're doing and search in the dev section for NVflash
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Yes, I used the command prompt on my PC to load the NVFlash image. From what I have learned reading that is the only way it will work correctly.
It is currently loading after the initial reboot and at the LG logo with the blue streak, which is encouraging.
mclark.usa said:
Yes, I used the command prompt on my PC to load the NVFlash image. From what I have learned reading that is the only way it will work correctly.
It is currently loading after the initial reboot and at the LG logo with the blue streak, which is encouraging.
Click to expand...
Click to collapse
Ok, that is good that you used nvflash to get CWM on your phone, that definitely wasn't the problem. Like he said earlier, could've been the kernel.
Sent from my LG-P999 using xda app-developers app
Still on the LG splash with blue, I am now considering dancing around the device wearing a tinfoil hat and a chickenfoot necklace... It would be incredibly cool if there was a way to pull a logfile after install or see one while the install is happening.
How long should this normally take? Almost 1 hr now..
mclark.usa said:
Still on the LG splash with blue, I am now considering dancing around the device wearing a tinfoil hat and a chickenfoot necklace... It would be incredibly cool if there was a way to pull a logfile after install or see one while the install is happening.
How long should this normally take?
Click to expand...
Click to collapse
Hahahaha, I almost laughed out loud at that. Umm, have you tried just a basic rom, like CM7? Just to compare if it works or something to see if it'll flash correctly and not your phone, and it might be a bad download for genesis. Just to be sure, it is indeed a P999?
Sent from my LG-P999 using xda app-developers app
noahk423 said:
Hahahaha, I almost laughed out loud at that. Umm, have you tried just a basic rom, like CM7? Just to compare if it works or something to see if it'll flash correctly and not your phone, and it might be a bad download for genesis. Just to be sure, it is indeed a P999?
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
I have a GB 2.3.3 on it now that loaded no problem. I tried that two days ago after several failed attempts. I am thinking its something here though because I couldn't get the ICS Domination ROM to work on it either. The GB ROM worked great after I flashed a new baseband to it. I had the static problem before that. It just doesn't want to cooperate with ICS. And the SD card is empty as well, I wanted to make sure there was enough room for a swap file.
I pulled the battery and it boots to the second LG logo and that's where it stays. I suppose both of the ROMs I tried could have been bad downloads, but idk., this has me flummoxed beyond belief. - and yes, it is a P999 (G2x) I bought about a year ago at a t-mobile store. I think it's time for a burial at sea for this thing!
There's always a fix. Possibly a bad download. You could try another CWM, the touch one, because I know a kernel doesn't flash on the touch one, but possibly those roms might flash on a touch recovery. Idk, I'm just babbling here.
Sent from my LG-P999 using xda app-developers app
noahk423 said:
There's always a fix. Possibly a bad download. You could try another CWM, the touch one, because I know a kernel doesn't flash on the touch one, but possibly those roms might flash on a touch recovery. Idk, I'm just babbling here.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Naw, not babble... I call it thinking with the keyboard still in gear. I will try the touch CWM idea, and keep plugging away. There IS a fix, I just haven't tripped over it yet. Thanks again!
I will post an update when I have some more data to spew.
mclark.usa said:
Naw, not babble... I call it thinking with the keyboard still in gear. I will try the touch CWM idea, and keep plugging away. There IS a fix, I just haven't tripped over it yet. Thanks again!
I will post an update when I have some more data to spew.
Click to expand...
Click to collapse
Yeah, no problem, I just wish I could think a little better, its late on a school night, so my brain is mush, haha. Well, if you still need help, keep looking for answers and ask here, I'll help, and so will others!
Sent from my LG-P999 using xda app-developers app
noahk423 said:
Yeah, no problem, I just wish I could think a little better, its late on a school night, so my brain is mush, haha. Well, if you still need help, keep looking for answers and ask here, I'll help, and so will others!
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Thanks again, and I will not give up on this, I am way more stubborn than that. I just flashed CWM v5.8.1.3 and restoring. I am going to try to load yet another variation of ICS and report the outcome. If nothing else, I do like this touch image I just loaded!
Have you tried doing a wipe before installing a rom? I've had times where known good roms won't boot just because I didn't wipe before installing it. If your gonna give this method a go try using this to wipe it. http://forum.xda-developers.com/showthread.php?t=1854850
Success!
Thanks for all the advice, you guys rock!
I flashed the CWM touch and downloaded AOPK Milestone 6 4.0.4 just to see if it would load. I did the same procedure as I have with all the others and it worked. I guess it was the CWM version? IDK, Going to try to go back to Genesis tomorrow. Thanks again to each of you for all of your help and advice.
Good deal. I've been using CWM touch ever since it showed up in the forums for our phone, and I've never had a problem flashing anything
Sent from my LG-P999 using xda premium
3G - 4G troubles?
I like it so far, much better than the older version I was using. I noticed this morning that I don't get any signal other than wifi. It looks like some people that did not opt for wifi were able to get signal after reinstalling with that option chosen. I did add the wifi initially, but no signal at all for data thus far. I didn't see any settings that I missed, the battery saver data stuff is unchecked and there aren't any others I could find. I am going to reinstall and hope it takes care of it.
A quick wipe and reload fixed it! :good:
I am new to all this and am trying to understand the kernel, I installed jellybam 3.2.0 and now 3.3.0, when I did that would I have automatically installed a new kernel, or is that not replaced?
From what I have read the kernel allows the jellybam ROM to talk to the hardware, so that said is it possible that the kernel I am using could be what is causing my Bluetooth to keep connecting and disconnecting BUT also my proximity sensor not to work? Sorry if this is the wrong place to ask
I have done a quick search but couldn't find anything to confirm my suspicion.
My kernel at the moment is 3.0.053-g099c572
Sent from my Sensation using xda app-developers app
bluetba said:
I am new to all this and am trying to understand the kernel, I installed jellybam 3.2.0 and now 3.3.0, when I did that would I have automatically installed a new kernel, or is that not replaced?
From what I have read the kernel allows the jellybam ROM to talk to the hardware, so that said is it possible that the kernel I am using could be what is causing my Bluetooth to keep connecting and disconnecting BUT also my proximity sensor not to work? Sorry if this is the wrong place to ask
I have done a quick search but couldn't find anything to confirm my suspicion.
My kernel at the moment is 3.0.053-g099c572
Sent from my Sensation using xda app-developers app
Click to expand...
Click to collapse
Yes every ROM usually includes a kernel, which is supposed to work well with the ROM. Maybe it's the kernel causing bluetooth problems, but it may also be the ROM itself which is buggy, or you firmware which is outdated. You'd better ask in the ROMs thread for more info. There are a lot of things which could cause problems and it's difficult to find out the cause sometimes. If they can help you in JellyBam's thread you could try another ROM and see if problem persists
Sent from my HTC Sensation Z710e using Tapatalk 2
Thanks for taking the time to explain that - it is appreciated and confirms my thoughts
Sent from my Sensation using xda app-developers app