hi,
I want to Know where i can found the product code of my device like: GT-N 8000EAAITV.
And is possible modify this code flashing other firmWare or is it Unique?
Please help me.
This code can be found in Kies (when the Note is connected) or in Settings - Device information.
The "code" identified the current firmware installed, you cannot modify it as such (and it would also make no sense), but an update to the firmware will result in a changed code.
However, you do not seem familiar with flash upgraded, stick with the ones supplied by Samsung. Otherwise you might brick your device.
akxak said:
This code can be found in Kies (when the Note is connected) or in Settings - Device information.
The "code" identified the current firmware installed, you cannot modify it as such (and it would also make no sense), but an update to the firmware will result in a changed code.
However, you do not seem familiar with flash upgraded, stick with the ones supplied by Samsung. Otherwise you might brick your device.
Click to expand...
Click to collapse
Hi,
the product code isn't in kies or in setting...
Look at this example gt-i9100 picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My seller tell me the product code GT-N8000EAAITV and i would verify it
also not in check fus but manually...
I see pda , phone and csc, but where is product code?
And, the product code change flashing other firmware?
There is a parameter that i see and not change that permit me to verify the region product of the device ?
casello said:
Hi,
the product code isn't in kies or in setting...
Click to expand...
Click to collapse
Kies shows the product/region code in the section where it informs about possible firmware updates, for my device it is DBT (German device).
Beside CheckFus, I yet did not find a code to access that information on the phone directly.
akxak said:
Kies shows the product/region code in the section where it informs about possible firmware updates, for my device it is DBT (German device).
Beside CheckFus, I yet did not find a code to access that information on the phone directly.
Click to expand...
Click to collapse
Can you tell me if chack fus is accurately?
And in kies you can find the entire product code like GT-N8000EAAITV?
What is the part that not change if i can flash other firmware?
Thanks to all
casello said:
Can you tell me if chack fus is accurately?
And in kies you can find the entire product code like GT-N8000EAAITV?
What is the part that not change if i can flash other firmware?
Thanks to all
Click to expand...
Click to collapse
CheckFus is correct, as it reads out the data from the device. In Kies, the country code is in brackets at the end.
Have a look at www.sammobile.com for the firmware version available, then you can compare.
As far as I can see everything can change when you flash as firmware. Normally you stick with the one for your region (otherwise it might not flash or brick the device), but I flashed the HC 3.2 P7501 (Tab 10.1N) on my Tab 10.1 (which have identical hardware, just different design due to the apple lawsuits) and my 10.1 reported itself as 10.1N. Flashing the ICS 10.1 firmware, it was a 10.1 (without N) again.
But where is your need to change that? As long as the Note 10.1 works, don't touch it if you are not 100% sure about what you are doing.
akxak said:
CheckFus is correct, as it reads out the data from the device. In Kies, the country code is in brackets at the end.
Have a look at www.sammobile.com for the firmware version available, then you can compare.
As far as I can see everything can change when you flash as firmware. Normally you stick with the one for your region (otherwise it might not flash or brick the device), but I flashed the HC 3.2 P7501 (Tab 10.1N) on my Tab 10.1 (which have identical hardware, just different design due to the apple lawsuits) and my 10.1 reported itself as 10.1N. Flashing the ICS 10.1 firmware, it was a 10.1 (without N) again.
But where is your need to change that? As long as the Note 10.1 works, don't touch it if you are not 100% sure about what you are doing.
Click to expand...
Click to collapse
I'm not interested to change it but i want to be sure that my device is an italy device.
Is possible that my seller flashing italian firmware on an american/europe device version and sell me this like an italian?
PS
(have you also any solution to the problem of import pdf in snote?)
THANKS THANKS THANKs to all
ITV should be the Italian version. I doubt that there are hardware differences between the versions, the firmware should do the localization. There have even been reports that a 8013 (US WIFI) is identical with the 8010 (EU WIFI), only the firmware is different.
Was the package closed and sealed when you got the phone? Where is the problem you fear.
Regarding the S-Note PDF import: Beside that I use ezPDF for PDF view/annotation, S-Note properly imports with my device.
akxak said:
ITV should be the Italian version. I doubt that there are hardware differences between the versions, the firmware should do the localization. There have even been reports that a 8013 (US WIFI) is identical with the 8010 (EU WIFI), only the firmware is different.
Was the package closed and sealed when you got the phone? Where is the problem you fear.
Regarding the S-Note PDF import: Beside that I use ezPDF for PDF view/annotation, S-Note properly imports with my device.
Click to expand...
Click to collapse
Thanks for all.
However I had this question because i bought this device when in italy there wasn't in phisical seller but only via web...
The package was closed and sealed.
For pdf import, i use ezpdf but snote not crash, but exit before complete import. can you help me? can you backup and post your snote version?
Please help me.
Thanks for all for your disponibility
casello said:
Thanks for all.
However I had this question because i bought this device when in italy there wasn't in phisical seller but only via web...
The package was closed and sealed.
For pdf import, i use ezpdf but snote not crash, but exit before complete import. can you help me? can you backup and post your snote version?
Please help me.
Thanks for all for your disponibility
Click to expand...
Click to collapse
Please, waiting for a reply...
Don't hurry please, keep in mind that on a Sunday, people might have other stuff to do.
What version do you have (Settings, App Manager, All, S Note, Version)?
Mine is 5r11736FV03
BUT S Note is part of the firmware, it cannot be modified without root rights and if modified, it might prevent any further OTA updates (as OTA are diff updates and if S Note does not match, a diff cannot be applied). I tried it once to install an older one and S Note just crashed.
akxak said:
Don't hurry please, keep in mind that on a Sunday, people might have other stuff to do.
What version do you have (Settings, App Manager, All, S Note, Version)?
Mine is 5r11736FV03
BUT S Note is part of the firmware, it cannot be modified without root rights and if modified, it might prevent any further OTA updates (as OTA are diff updates and if S Note does not match, a diff cannot be applied). I tried it once to install an older one and S Note just crashed.
Click to expand...
Click to collapse
I'm sorry,you are right.
My version is: 5r9830V03
However I have root permission.
Vey thanks for all.
casello said:
I'm sorry,you are right.
My version is: 5r9830V03
However I have root permission.
Vey thanks for all.
Click to expand...
Click to collapse
waiting a reply...Thanks for all.
You got a PM!
akxak said:
You got a PM!
Click to expand...
Click to collapse
0k, I reply to you in PVT...
Thanks very much...
casello said:
0k, I reply to you in PVT...
Thanks very much...
Click to expand...
Click to collapse
the problem persiste ..
Send you another PV
Related
Hi,
I just wanted to let you know that check Fus now should work with GT-P1000. It is also possible to add GT-P1000 specific presets! Just PM me to add one
You can use this app to check if there's any new firmware pushed to Kies, instead of having to start Kies at all!
You can find more info here here.
It works
http://forum.xda-developers.com/showthread.php?p=9642432#post9642432
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
nevermind it works, tnx
Check FUS finds an update, but apparently I'm running afirmware that Kies refuses to accept as updatable. Does anyone kno what controls whether Kies thinks the firmware is allowed or not?
alias_neo said:
Check FUS finds an update, but apparently I'm running afirmware that Kies refuses to accept as updatable. Does anyone kno what controls whether Kies thinks the firmware is allowed or not?
Click to expand...
Click to collapse
it doesn't run on my device
Product code: OLB
PDA: P1000DXJJ1
Phone: P1000DXJJ1
CSC1000OLBJJ2
Region: singapore.
Output: No firmware info found. You are probably not using an official firmware.
elnoxvie said:
it doesn't run on my device
Product code: OLB
PDA: P1000DXJJ1
Phone: P1000DXJJ1
CSC1000OLBJJ2
Region: singapore.
Output: No firmware info found. You are probably not using an official firmware.
Click to expand...
Click to collapse
Try product code: XSO
Need help
from what my registry says my device is: GT-P1000CWADBT
Region: Germany
SoftwareRevision: P1000XXJID/P1000OXAJID/P1000XXJID/P1000XXJID
So how must this info been typed in to "check fus"?
Doesn't seem to work for T-mobile tab. Runs fine but I get the same error about not using official firmware when I am just running a stock tab.
Edit: just noticed you said gtp 1000
weichei said:
from what my registry says my device is: GT-P1000CWADBT
Region: Germany
SoftwareRevision: P1000XXJID/P1000OXAJID/P1000XXJID/P1000XXJID
So how must this info been typed in to "check fus"?
Click to expand...
Click to collapse
Product code: GT-P1000CWADBT
PDA and Phone: P1000XXJID
CSC: P1000OXAJID
I can add it as a preset as soon as i get back home!
edit: I have added it to the preset list.
Sent from my GT-I9000 using XDA App
scottprotege said:
Doesn't seem to work for T-mobile tab. Runs fine but I get the same error about not using official firmware when I am just running a stock tab.
Edit: just noticed you said gtp 1000
Click to expand...
Click to collapse
What info do you get in product code, pda, csc and phone?
And whats the model name?
Sent from my GT-I9000 using XDA App
I get this
Binary URI:http://fus.samsungmobile.com/Phone_Binary/9/
Deleted
All info looks correct in fus (NEE,JJ3,JID,JJ2)
NEE is a scandinavian product code right?
biopsin said:
I get this
Binary URI:http://fus.samsungmobile.com/Phone_Binary/9/
Deleted
All info looks correct in fus (NEE,JJ3,JID,JJ2)
NEE is a scandinavian product code right?
Click to expand...
Click to collapse
Seems like Samsung have deleted the firmware-file from their servers, for some reason...
LuffarJoh said:
What info do you get in product code, pda, csc and phone?
And whats the model name?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The info for my device follows
Product code: TMB
PDA: T849UVJJB
CSC:T849TMBJJB
Phone: T849UVJJB
The model name according to T-mobile is SGH-T849. Check fus shows the same.
Thanks!
Im reciving a update today via kies, but fus is still showing deleted, so i guess the dl folder is somewhere else..
i would like to mention that i did run kies reg patcher 1.7.0.0 for fun and replaced all info from fus.
2sec later a update was available.
Updating now and crossing fingers (6)
EDIT : Nah kies messed it up.. loops only into recovery.
hi all. installed "Check Fus v.0.5.0 and I got this. How can I fix this? I mention that I bought the Tab from Dubai, and changed the ROM, because no Market here! Thanks in advance for any help!!!
I got also the correct code, but same results....
Thank you for the input! Ill get back to you when I have had a look at it!
Sent from my GT-I9000 using XDA App
biopsin said:
Im reciving a update today via kies, but fus is still showing deleted, so i guess the dl folder is somewhere else..
i would like to mention that i did run kies reg patcher 1.7.0.0 for fun and replaced all info from fus.
2sec later a update was available.
Updating now and crossing fingers (6)
EDIT : Nah kies messed it up.. loops only into recovery.
Click to expand...
Click to collapse
I have found the problem, upgrade mode was not enabled, which made it hide some updates and file location. It will come a small fix soon!
Sweet man
Update through kies went finally on a 32bit system, on 64 it would fail ugly...
The kies patcher works great, but fus is telling me now im on unofficial firmware, odd.
Ran the firmwareupdate again in kies for dbl check and it gives me the same update so
updating kies reg patcher with new firmware should solve that.
New version!
v.0.6.0
+ Last used preset/manual input is stored. (Not if you have ROOT, it will be replaced by the devices info)
* Changed the output format
* Changed to "Upgrade Mode" in the request to FUS. Will now return better output
* Fixed the order in the preset list
Automatic check will come in next release!
Hey guys,
here's the link to the first firmware update for the SM-R732:
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
MD5: C4A14900315D87CE9CBC86B12ECCEB3E
Size: 5,500,427 bytes
Stock firmware version: R732XXU2AOIL
This version: R732XXU2AOJ3
Content:
delta.boot
delta.csc
delta.module
delta.ramdisk2
delta.recovery
delta.rootfs
delta.ua
sboot.bin
update.cfg
Not sure how to access firmware. My S2 can't connect to Nexus 5 since Marshmallow update on Monday. Although, is this only for Samsung Galaxy phones, or all?
Changelog?
Sent from my SM-G925P using Tapatalk
SKFU said:
Hey guys,
here's the link to the first firmware update for the SM-R732:
fota-s3-dn.opserver.*et/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin?px-hash=&px-wid=WP20151014-CC-62666281&px-wctime=2015-10-14%2013:44:40.0&px-unum=%20HTTP/1.1\r\n
Make sure to replace the timestamps etc to get a valid download.
MD5: C4A14900315D87CE9CBC86B12ECCEB3E
Size: 5,500,427 bytes
Stock firmware version: R732XXU2AOIL
This version: R732XXU2AOJ3
Content:
delta.boot
delta.csc
delta.module
delta.ramdisk2
delta.recovery
delta.rootfs
delta.ua
sboot.bin
update.cfg
Click to expand...
Click to collapse
This is not a working URL...
I've tried changing the time stamps but nothing seems to work. Can someone upload to another host? or shed light on what to do with the time stamps?
I don't see any info regarding an update anywhere on the web. You would think someone would write about it.
Hey,
I'll try to reverse the update process over the next days, it seems it requires more than just valid timestamp to receive the valid download.
This update is an OTA update and does not contain the full system image. Mounting the rootfs fails, I think it's more likely an incremental patch file or similar.
Nevertheless, you can easily sniff it yourself. Just make sure you use an on-device sniffer because Samsung uses a technique to bypass proxies.
Once set-up, start the Gear Manager on your phone and search for an update for your watch.
Furthermore I requested the open-source parts of the Gear S2 at Samsung. They made available the files for the last firmware here:
opensource.samsung.com - search for SM-R720
Best regards,
- S
Ok guys, the link is now working, it was just a typo, my fail
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
Anyway, still going to check how it finds the firmware files...
Once we have the downloaded file, how do we push it to the watch?
SKFU said:
Ok guys, the link is now working, it was just a typo, my fail
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
Anyway, still going to check how it finds the firmware files...
Click to expand...
Click to collapse
It's more likely for research. Normally you simply update via the Gear Manager. Nevertheless it should be possible to upload the file via Odin as well.
There is a new version of it called NetOdin especially for non USB devices like this.
ripv2 said:
Once we have the downloaded file, how do we push it to the watch?
Click to expand...
Click to collapse
SKFU said:
It's more likely for research. Normally you simply update via the Gear Manager. Nevertheless it should be possible to upload the file via Odin as well.
There is a new version of it called NetOdin especially for non USB devices like this.
Click to expand...
Click to collapse
Have you a link to NetOdin? I can't see it anywhere
Here you go: bbs.52samsung.com/thread-737324-1-1.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ash99 said:
Have you a link to NetOdin? I can't see it anywhere
Click to expand...
Click to collapse
is this firmware update worth side loading? I don't think people on "Non Supported" devices will be able to get the update normally, so this might be the only option.
SKFU said:
Here you go: bbs.52samsung.com/thread-737324-1-1.html
Click to expand...
Click to collapse
I agree, I did not notice any major changes after the update.
As said, this is for research purpose in my view. The update *should* only be applied via the official Samsung Gear app. This update file is for the Classic Bluetooth EU version btw.
Anyway, since the files seem to be patches and not a full OS, we might not go too far with this. Mounting does not work for me, so rooting can not be applied to it, yet
If someone finds the full firmware somehow (maybe call Samsung and pretend a brick?), let us know
ripv2 said:
is this firmware update worth side loading? I don't think people on "Non Supported" devices will be able to get the update normally, so this might be the only option.
Click to expand...
Click to collapse
Interesting, someone succsessfully testet this update? I am quite interessted in this Version because of my US Version of my S2 classic. Can I overwrite es US setting for the metric system and my anguage s-voice?
I can't really deal with that fahrenheit degree.
Does this update fix the notification issues? The issues I see is when the watch doesn't show the always on screen it will not vibrate when notifications come in.
I just got the update on my s2 sport and have not really noticed any differences. It said performance so maybe the battery life will be a little better than what it already is! I'll keep playing with it to see if there are any changes I'm missing.
Got the update last night and so far, no real changes. There is susposed to be an update in November to enable Samsung Pay. Can't see that this update has that.
I can confirm that I have repeatedly been able reconnect my S2 to my Nexus 5 on Marshmallow after I installed the S2 firmware update that was available in the USA in the Gear app under the About Gear settings. I went from firmware version R720XXU2AOIL to R720XXU2AOJ3. I found that even after installing the firmware, I had to do one Light Reset on the S2 before the S2 would reconnect.
So far so good. Have intentionally gone out of range 6 times and reconnected all 6 times. Will report back if situation changes.
There is a firmware update available for the watch from the gear manager. My update was 5.30MB in size and says it has bug fixes.
Hi, English support is very hard to find for this phone. Here's how i got the beta updates. I know that ColorOS sucks, but with the latest ColorOS 5.0 beta update it gets a little better.
Its very simple and it works only with the Chinese model.
1. Download the apk file that i uploaded here and install it.
2. Open de installed app ColorOS and push the green button with Chinese text four times.
3. Now go to Settings --> Software Updates and it will download and install the latest beta update
4. You can find the latest beta changelog here (must use Google Translate)
5. Remember, there is no going back to a lower version
@WhySoSeriousJoKer, seems the download link is not working.. can you upload it anywhere else? Dropbox?
itskapil said:
@WhySoSeriousJoKer, seems the download link is not working.. can you upload it anywhere else? Dropbox?
Click to expand...
Click to collapse
Here a MEGA link.
https://mega.nz/#!WhsSURxD!dQFQ0fFO3Muvda8RwVfiStU89sdFwvwZrj0izEAXYr8
WhySoSeriousJoKer said:
Here a MEGA link.
https://mega.nz/#!WhsSURxD!dQFQ0fFO3Muvda8RwVfiStU89sdFwvwZrj0izEAXYr8
Click to expand...
Click to collapse
Is this the same one as "OPPO R11 public beta upgrade 0804.apk"?
Thanks for the link, BTW!!
itskapil said:
Is this the same one as "OPPO R11 public beta upgrade 0804.apk"?
Thanks for the link, BTW!!
Click to expand...
Click to collapse
I think so, it works with the R11, R11s/R11 Plus/R11s Plus. It worked great on my R11s Plus frm China. It only doesn't work with the t versions. No idea what the difference is.
WhySoSeriousJoKer said:
I think so, it works with the R11, R11s/R11 Plus/R11s Plus. It worked great on my R11s Plus. It only doesn't work with the Plust versions. No idea what the difference is.
Click to expand...
Click to collapse
Cool. Thanks!
I use a China version Oppo R11st ship from China(no pre-installed Play Store).I tried but failed.Do I need an Oppo ID to upgrade?I tried to create an Oppo ID but unsuccessful because it required a China number telephone.
P/s:My apology for the correct answer right above my post.Thanks anyway for your contribution.
badday0401 said:
I use a China version Oppo R11st ship from China(no pre-installed Play Store).I tried but failed.Do I need an Oppo ID to upgrade?I tried to create an Oppo ID but unsuccessful because it required a China number telephone.
P/s:My apology for the correct answer right above my post.Thanks anyway for your contribution.
Click to expand...
Click to collapse
No problem, but what is different with the t version? My none t version is also from China.
WhySoSeriousJoKer said:
No problem, but what is different with the t version? My none t version is also from China.
Click to expand...
Click to collapse
I don't know bro,it's hard to get information from Chinese language.
Doesn't work on the Australian model unfortunately, met with this error message when using the apk file.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SamLovesJam said:
Doesn't work on the Australian model unfortunately, met with this error message when using the apk file.
Click to expand...
Click to collapse
Didnt know that there where other models out. What is thrle difference with the Chinese model? Multi languages, google apps installed and more support for bands?
WhySoSeriousJoKer said:
Didnt know that there where other models out. What is difference with the Chinese model? Multi languages, google apps installed, more support for bands?
Click to expand...
Click to collapse
Unsure about bands, but it does come with multiple languages, GApps pre-installed along with a firmware number that can't be found on the Chinese site. Would try flashing the Chinese ROM but I don't want to mess anything up honestly, will make its way over here eventually.
SamLovesJam said:
Unsure about bands, but it does come with multiple languages, GApps pre-installed along with a firmware number that can't be found on the Chinese site. Would try flashing the Chinese ROM but I don't want to mess anything up honestly, will make its way over here eventually.
Click to expand...
Click to collapse
Ok interesting and does the Australian model have Dutch (Netherlands) language? Yeah stay on the Australian ROM the Chinese model does have its problems.
Like with Whatsapp notifications, i don't get them. I did erveryting like in this video and also added a Whatsapp widget but still no luck. You also have this with the Australian model?
I will try this method to unistall some oppo apps that block notifications.
WhySoSeriousJoKer said:
Ok interesting and does the Australian model have Dutch (Netherlands) language? Yeah stay on the Australian ROM the Chinese model does have some problems.
Like with Whatsapp notifications, idon't get them. I did erveryting like in this video and also added a Whatsapp widget but still no luck. You also have this with the Australian model?
I will try this method to unistall some oppo apps that block notifications.
Click to expand...
Click to collapse
It does have Dutch yes. Can't help you with the WhatsApp notifications though as I don't use it, the Australian model still has the Oppo apps installed, such as Phone Manager. Telegram/Instagram/Twitter are recommended apps on the startup manager and so I get notifications from it without doing anything, but for the rest I followed the same video you did and that fixed the notification issue on my phone. Might be a WhatsApp specific issue.
SamLovesJam said:
It does have Dutch yes. Can't help you with the WhatsApp notifications though as I don't use it, the Australian model still has the Oppo apps installed, such as Phone Manager. Telegram/Instagram/Twitter are recommended apps on the startup manager and so I get notifications from it without doing anything, but for the rest I followed the same video you did and that fixed the notification issue on my phone. Might be a WhatsApp specific issue.
Click to expand...
Click to collapse
Thats nice, the Chinese model doesnt have it. I tried to update to the Australian ROM, but it says i run a newer version and cannot install it
Do you have a EAN barcode or model number on the box? Maybe i can find it online.
WhySoSeriousJoKer said:
Thats nice, the Chinese model doesnt have it. I tried to update to the Australian ROM, but it says i run a newer version and cannot install it
Do you have a EAN barcode or model number on the box? Maybe i can find it online.
Click to expand...
Click to collapse
Guess there's no downgrading to an older firmware? Model is CPH1719.
good for r11 users. no beta program for f3 plus users yet :/
I found a box picture from the Singapore R11s Plus model and i think the Australian model is the same. The bands are different then the Chinese model and there are many languages on the box (also NL). It looks like this is the international version. Going to see if i can find this international version online.
I hope Oreo will be soon be here
SamLovesJam said:
It does have Dutch yes. Can't help you with the WhatsApp notifications though as I don't use it, the Australian model still has the Oppo apps installed, such as Phone Manager. Telegram/Instagram/Twitter are recommended apps on the startup manager and so I get notifications from it without doing anything, but for the rest I followed the same video you did and that fixed the notification issue on my phone. Might be a WhatsApp specific issue.
Click to expand...
Click to collapse
I got the R11s Plus Singapore model in black color today and damn this model is much better than the Chinese model i fist had.
Singapore model:
- Has Dutch language and more
- Supports LTE/4G Band 20 (800 mhz)
- Google apps are preinstalled
- Chinese apps are gone.
- All notification are working, also Whatsapp
Only downside is that it is still on Android 7.1.1. The Chinese model was on 8.1 beta. What Android is on the Australian version?
Thanks for the info SamLovesJam!
I've successfully got a working bootloader code for my M5 and it worked. I am now running generic system image and it is working beautifully.
For the record, I am owning a 10 inch M5 (not pro), 64 GB wifi-only version. Bought from official Huawei online store in China. I don't know if this would work on other versions but it is worth a try.
Note: The unlock service from Huawei will terminate on 23 July. It is highly recommended to get a bootloader code if you plan to use custom rom in the future.
Edit: Seems that images are missing. Here is the imgur album link: imgur.com/a/FaaGNkL
I'll try to fix the images. Sorry for any inconvenience!
Requirements for getting the code
A Huawei M5 tablet of cause. 3G or wifi version
A desktop computer
The tablet must login into Huawei cloud for at least 2 weeks
The final requirement is not listed in English version. I am not sure if that need to be fulfilled in English version or not.
Link to unlock form: emui.huawei.com/en/plugin/unlock/index
(Sorry but XDA disallow me to post outside link. I would update this post once I got the permission)
================
1. Go to the link and login with the same account on your tablet
2. Accept the terms
3. Select "Since EMUI 5.0"
4. The "smartphone" cannot be changed. It is by design (or a bug)
For 3G version owners, follow the instruction and fill in the form. I am not owning 3G version and therefore I could not proof if the form is working or not.
================
For Wifi version, the process would be quite tricky.
Seems that Huawei did not plan to make a new wifi-only tablet when designing this unlock web page. We could not skip IMEI field in this form.
...Unless we do some tricks.
This tutorial uses Firefox browser. Chrome does not have resend request feature which is required for our purpose.
Enter the following sequence in offical calculator App
Code:
()()1357946()()
The displayed window should give you all information needed except the IMEI.
It is time for some tricks. Press F12 on your keyboard to bring up developer tools and navigate to Network panel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enter some random number in IMEI field and submit the form. The submission should fail (no surprise) with reason "SN and IMEI are mismatched." and a request entry would be logged in the developer tools.
Inspect the request to check route and click Edit and Resend Button.
Edit the Request body:
Change needimei from 1 to 0
Remove imei field (Remove imei=......&), rember to remove & symbol or the request would be invalid
Update veri to new verification code in the window
The reuslt sould request body should look like this
Code:
before5=0&sn=YOUR_SERIAL_NUMBER&checkCode=SOME_NUMBER&veri=VERIFICATION_CODE&needimei=0&_form_key=c934efde48a3
Click send and a new check request should show up in the developer tools panel. Inspect it and check the Response tab.
The blacken part is the bootloader unlock code for your device.
================
I used this code for unlocking my device and it workes.
Hope this guide helps!
Worked like a charm! Thanks. I am in the US and got got the US/English version in the mail today and its already unlocked. Dont forget to enable developer options and oem unlock toggle like I did. Thanks
Flexia32 said:
Worked like a charm! Thanks. I am in the US and got got the US/English version in the mail today and its already unlocked. Dont forget to enable developer options and oem unlock toggle like I did. Thanks
Click to expand...
Click to collapse
Oh my gosh forgot to check the oem unlock option. Luckly my device still works
You absolutely rock. Thank you!!!
Are you saying if you have a US version, the tablet is already unlocked and I can root?
Sent from my Pixel 2 using Tapatalk
I can't get this to work. I keep trying the method above, but it always says SN and IMEI are mismatched. Could it be because I've only had the tablet for a couple of days?
I unlocked my tablet immediately after unboxing and it worked.
You Sir, deserve a medal!
Marvelous, thanks @holi0317 !
Dr.Nop said:
I unlocked my tablet immediately after unboxing and it worked.
Click to expand...
Click to collapse
Thanks, sounds like it is something I'm doing wrong then.
Sent from my Pixel 2 using Tapatalk
C5Longhorn said:
Are you saying if you have a US version, the tablet is already unlocked and I can root?
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
Sorry for the late reply. I did not receive notification from XDA
I don't own an US version. But I don't think there will be much of the difference in terms of bootloader locking and unlocking strategy.
The tablet should be locked by default and you have to unlock it before rooting.
Thanks for the reply, I got it unlocked, now I'm trying to root.
Sent from my Pixel 2 using Tapatalk
The response I get is "imei_notbound_account"
I called US support and they referred me to China support because I have the SHT-W09 C432 variant (I thought this was European). I emailed that support line and hope to get some direction back on how to unlock the bootloader. Everything I've done online so far via their webpage and this tutorial does not work. Anyone have any ideas?
sarichter said:
The response I get is "imei_notbound_account"
I called US support and they referred me to China support because I have the SHT-W09 C432 variant (I thought this was European). I emailed that support line and hope to get some direction back on how to unlock the bootloader. Everything I've done online so far via their webpage and this tutorial does not work. Anyone have any ideas?
Click to expand...
Click to collapse
Use DC unlocker instead. I have the same model was getting the same response and Huawei support was useless.
purple lady said:
Use DC unlocker instead. I have the same model was getting the same response and Huawei support was useless.
Click to expand...
Click to collapse
Worked like a charm... minus the massive issue of getting the device to be recognzied. Thank you for the suggestion.
i tried it then i got the code but when i write it and click commit i still end up with SN and IMEI are mismatched WTF?
btw i wasnt connected in the cloud until maybe a week so pls tell me that this has nothing to do with the fact that it didnt work.
PLS HELP
radafus said:
i tried it then i got the code but when i write it and click commit i still end up with SN and IMEI are mismatched WTF?
btw i wasnt connected in the cloud until maybe a week so pls tell me that this has nothing to do with the fact that it didnt work.
PLS HELP
Click to expand...
Click to collapse
Highly recommend doing what Purple Lady suggested.
sarichter said:
Highly recommend doing what Purple Lady suggested.
Click to expand...
Click to collapse
is it free?
radafus said:
i tried it then i got the code but when i write it and click commit i still end up with SN and IMEI are mismatched WTF?
btw i wasnt connected in the cloud until maybe a week so pls tell me that this has nothing to do with the fact that it didnt work.
PLS HELP
Click to expand...
Click to collapse
radafus said:
is it free?
Click to expand...
Click to collapse
No. It's only 4 euros! It is practically free.
This worked great (SHT-W09). Thank you!
How do you log into the huawei cloud. I'm on the Mediapad M5 and I can seem to find where to log into the huawei cloud.
Download Samfw Frp Tool
Remove Sim card but keep wifi on
Change CSC to TMB
Check for update and install
Insert Sim card back and CSC will change automatically to XAA
NO DATA WILL BE LOST
I went from AVG6 ATT and switched to T mobile and im getting upgrades. Lets see if it goes up to A13.
Running that FRP tool on Virus total produced 5 hits... I'd double check the reliability of that tool before installing and hooking up your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
creedicd said:
Running that FRP tool on Virus total produced 5 hits... I'd double check the reliability of that tool before installing and hooking up your phone.
View attachment 5750897
Click to expand...
Click to collapse
Haven't checked it myself but they provide virustotal link on their website and it wasn't showing malware
creedicd said:
Running that FRP tool on Virus total produced 5 hits... I'd double check the reliability of that tool before installing and hooking up your phone.
View attachment 5750897
Click to expand...
Click to collapse
Pretty much all tools like that will have some hits, in at least one database, due to the exploits that they use. Doesn't necessary mean that it's malicious
How do you find the latest stock firmware for USA, I tried XAA/ATT/TMB with Frija but didn't work.
bobimbap said:
How do you find the latest stock firmware for USA, I tried XAA/ATT/TMB with Frija but didn't work.
Click to expand...
Click to collapse
iBowToAndroid said:
View attachment 5751643
Click to expand...
Click to collapse
Thank you sir!! I found out the problem was my model is SM-S908E so that's why.
bobimbap said:
Thank you sir!! I found out the problem was my model is SM-S908E so that's why.
Click to expand...
Click to collapse
Why are you looking for USA firmware, for a non USA phone? That's not how it works
iBowToAndroid said:
Why are you looking for USA firmware, for a non USA phone? That's not how it works
I bought it overseas. I thought it would work by using my carrier stock firmware.
Click to expand...
Click to collapse
The only non USA devices that you can flash USA firmware to are Canadian devices
This is so awesome, i'm so glad that this was just recently posted. I just received my phone a couple days ago with S908U1UES2AVI5. I followed the steps from the OP and immediately was able to download and install the update. It is currently on the black screen with the android updating progressbar, waiting for this to finish.
Edit: Just to note that I have XAG
Edit2: Updated to S908U1UEU2BVJA
Thanks!
has anyone got November security update post ONE UI 5?
DoctorNasty said:
Download Samfw Frp Tool
Remove Sim card but keep wifi on
Change CSC to TMB
Check for update and install
Insert Sim card back and CSC will change automatically to XAA
NO DATA WILL BE LOST
Click to expand...
Click to collapse
Could u possibly post the link to download it. Srry new at this and just wanna be sure iam downloading the right thing lol
kayjo said:
Could u possibly post the link to download it. Srry new at this and just wanna be sure iam downloading the right thing lol
Click to expand...
Click to collapse
https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
Here u go.
But this version didn't worked for me, so I had to use older version.
I threw in a Tmobile simcard and the update went through, then after the install I swapped back my original Sim.
DoctorNasty said:
https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
Here u go.
But this version didn't worked for me, so I had to use older version.
Click to expand...
Click to collapse
Yeah i can't figure out what in doing so guess I'm not gonna do it lol
kayjo said:
Yeah i can't figure out what in doing so guess I'm not gonna do it lol
Click to expand...
Click to collapse
It's really easy. Enable USB debugging in developers mode, plug in phone to your PC and open FRP Tool, write TMB in CSC field and press change CSC. That's it
Ok, seems that it's time to stop waiting and just use what we have on hand here.
Im on factory unlocked S908U1, in Europe, with European SIM.
Build number: SP1A.210812.016.S908U1UES2AVI5
Service provider software version:
SAOMC_SM-S908U1_OYM_XAA_12_0028
XAA/XAA,ATT/ATT
Here I'm puzzled, because I've never used eSIM, and it shows ATT for some reason.
Question for more experienced members here:
Is there any problem for me to update with TMB? If it's all the same, why we are waiting so long updates for unlocked s22?
draskome said:
Ok, seems that it's time to stop waiting and just use what we have on hand here.
Im on factory unlocked S908U1, in Europe, with European SIM.
Build number: SP1A.210812.016.S908U1UES2AVI5
Service provider software version:
SAOMC_SM-S908U1_OYM_XAA_12_0028
XAA/XAA,ATT/ATT
Here I'm puzzled, because I've never used eSIM, and it shows ATT for some reason.
Question for more experienced members here:
Is there any problem for me to update with TMB? If it's all the same, why we are waiting so long updates for unlocked s22?
Click to expand...
Click to collapse
Change CSC to TMB and you'll get update. Don't forget to remove Sim before changing it