Database Info

info product Code

hi,
I want to Know where i can found the product code of my device like: GT-N 8000EAAITV.
And is possible modify this code flashing other firmWare or is it Unique?
Please help me.

This code can be found in Kies (when the Note is connected) or in Settings - Device information.
The "code" identified the current firmware installed, you cannot modify it as such (and it would also make no sense), but an update to the firmware will result in a changed code.
However, you do not seem familiar with flash upgraded, stick with the ones supplied by Samsung. Otherwise you might brick your device.

akxak said:
This code can be found in Kies (when the Note is connected) or in Settings - Device information.
The "code" identified the current firmware installed, you cannot modify it as such (and it would also make no sense), but an update to the firmware will result in a changed code.
However, you do not seem familiar with flash upgraded, stick with the ones supplied by Samsung. Otherwise you might brick your device.
Click to expand...
Click to collapse
Hi,
the product code isn't in kies or in setting...
Look at this example gt-i9100 picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My seller tell me the product code GT-N8000EAAITV and i would verify it
also not in check fus but manually...
I see pda , phone and csc, but where is product code?
And, the product code change flashing other firmware?
There is a parameter that i see and not change that permit me to verify the region product of the device ?

casello said:
Hi,
the product code isn't in kies or in setting...
Click to expand...
Click to collapse
Kies shows the product/region code in the section where it informs about possible firmware updates, for my device it is DBT (German device).
Beside CheckFus, I yet did not find a code to access that information on the phone directly.

akxak said:
Kies shows the product/region code in the section where it informs about possible firmware updates, for my device it is DBT (German device).
Beside CheckFus, I yet did not find a code to access that information on the phone directly.
Click to expand...
Click to collapse
Can you tell me if chack fus is accurately?
And in kies you can find the entire product code like GT-N8000EAAITV?
What is the part that not change if i can flash other firmware?
Thanks to all

casello said:
Can you tell me if chack fus is accurately?
And in kies you can find the entire product code like GT-N8000EAAITV?
What is the part that not change if i can flash other firmware?
Thanks to all
Click to expand...
Click to collapse
CheckFus is correct, as it reads out the data from the device. In Kies, the country code is in brackets at the end.
Have a look at www.sammobile.com for the firmware version available, then you can compare.
As far as I can see everything can change when you flash as firmware. Normally you stick with the one for your region (otherwise it might not flash or brick the device), but I flashed the HC 3.2 P7501 (Tab 10.1N) on my Tab 10.1 (which have identical hardware, just different design due to the apple lawsuits) and my 10.1 reported itself as 10.1N. Flashing the ICS 10.1 firmware, it was a 10.1 (without N) again.
But where is your need to change that? As long as the Note 10.1 works, don't touch it if you are not 100% sure about what you are doing.

akxak said:
CheckFus is correct, as it reads out the data from the device. In Kies, the country code is in brackets at the end.
Have a look at www.sammobile.com for the firmware version available, then you can compare.
As far as I can see everything can change when you flash as firmware. Normally you stick with the one for your region (otherwise it might not flash or brick the device), but I flashed the HC 3.2 P7501 (Tab 10.1N) on my Tab 10.1 (which have identical hardware, just different design due to the apple lawsuits) and my 10.1 reported itself as 10.1N. Flashing the ICS 10.1 firmware, it was a 10.1 (without N) again.
But where is your need to change that? As long as the Note 10.1 works, don't touch it if you are not 100% sure about what you are doing.
Click to expand...
Click to collapse
I'm not interested to change it but i want to be sure that my device is an italy device.
Is possible that my seller flashing italian firmware on an american/europe device version and sell me this like an italian?
PS
(have you also any solution to the problem of import pdf in snote?)
THANKS THANKS THANKs to all

ITV should be the Italian version. I doubt that there are hardware differences between the versions, the firmware should do the localization. There have even been reports that a 8013 (US WIFI) is identical with the 8010 (EU WIFI), only the firmware is different.
Was the package closed and sealed when you got the phone? Where is the problem you fear.
Regarding the S-Note PDF import: Beside that I use ezPDF for PDF view/annotation, S-Note properly imports with my device.

akxak said:
ITV should be the Italian version. I doubt that there are hardware differences between the versions, the firmware should do the localization. There have even been reports that a 8013 (US WIFI) is identical with the 8010 (EU WIFI), only the firmware is different.
Was the package closed and sealed when you got the phone? Where is the problem you fear.
Regarding the S-Note PDF import: Beside that I use ezPDF for PDF view/annotation, S-Note properly imports with my device.
Click to expand...
Click to collapse
Thanks for all.
However I had this question because i bought this device when in italy there wasn't in phisical seller but only via web...
The package was closed and sealed.
For pdf import, i use ezpdf but snote not crash, but exit before complete import. can you help me? can you backup and post your snote version?
Please help me.
Thanks for all for your disponibility

casello said:
Thanks for all.
However I had this question because i bought this device when in italy there wasn't in phisical seller but only via web...
The package was closed and sealed.
For pdf import, i use ezpdf but snote not crash, but exit before complete import. can you help me? can you backup and post your snote version?
Please help me.
Thanks for all for your disponibility
Click to expand...
Click to collapse
Please, waiting for a reply...

Don't hurry please, keep in mind that on a Sunday, people might have other stuff to do.
What version do you have (Settings, App Manager, All, S Note, Version)?
Mine is 5r11736FV03
BUT S Note is part of the firmware, it cannot be modified without root rights and if modified, it might prevent any further OTA updates (as OTA are diff updates and if S Note does not match, a diff cannot be applied). I tried it once to install an older one and S Note just crashed.

akxak said:
Don't hurry please, keep in mind that on a Sunday, people might have other stuff to do.
What version do you have (Settings, App Manager, All, S Note, Version)?
Mine is 5r11736FV03
BUT S Note is part of the firmware, it cannot be modified without root rights and if modified, it might prevent any further OTA updates (as OTA are diff updates and if S Note does not match, a diff cannot be applied). I tried it once to install an older one and S Note just crashed.
Click to expand...
Click to collapse
I'm sorry,you are right.
My version is: 5r9830V03
However I have root permission.
Vey thanks for all.

casello said:
I'm sorry,you are right.
My version is: 5r9830V03
However I have root permission.
Vey thanks for all.
Click to expand...
Click to collapse
waiting a reply...Thanks for all.

You got a PM!

akxak said:
You got a PM!
Click to expand...
Click to collapse
0k, I reply to you in PVT...
Thanks very much...

casello said:
0k, I reply to you in PVT...
Thanks very much...
Click to expand...
Click to collapse
the problem persiste ..
Send you another PV

Gear S2 Fimware Update

Hey guys,
here's the link to the first firmware update for the SM-R732:
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
MD5: C4A14900315D87CE9CBC86B12ECCEB3E
Size: 5,500,427 bytes
Stock firmware version: R732XXU2AOIL
This version: R732XXU2AOJ3
Content:
delta.boot
delta.csc
delta.module
delta.ramdisk2
delta.recovery
delta.rootfs
delta.ua
sboot.bin
update.cfg

Not sure how to access firmware. My S2 can't connect to Nexus 5 since Marshmallow update on Monday. Although, is this only for Samsung Galaxy phones, or all?

Changelog?
Sent from my SM-G925P using Tapatalk

SKFU said:
Hey guys,
here's the link to the first firmware update for the SM-R732:
fota-s3-dn.opserver.*et/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin?px-hash=&px-wid=WP20151014-CC-62666281&px-wctime=2015-10-14%2013:44:40.0&px-unum=%20HTTP/1.1\r\n
Make sure to replace the timestamps etc to get a valid download.
MD5: C4A14900315D87CE9CBC86B12ECCEB3E
Size: 5,500,427 bytes
Stock firmware version: R732XXU2AOIL
This version: R732XXU2AOJ3
Content:
delta.boot
delta.csc
delta.module
delta.ramdisk2
delta.recovery
delta.rootfs
delta.ua
sboot.bin
update.cfg
Click to expand...
Click to collapse
This is not a working URL...

I've tried changing the time stamps but nothing seems to work. Can someone upload to another host? or shed light on what to do with the time stamps?

I don't see any info regarding an update anywhere on the web. You would think someone would write about it.

Hey,
I'll try to reverse the update process over the next days, it seems it requires more than just valid timestamp to receive the valid download.
This update is an OTA update and does not contain the full system image. Mounting the rootfs fails, I think it's more likely an incremental patch file or similar.
Nevertheless, you can easily sniff it yourself. Just make sure you use an on-device sniffer because Samsung uses a technique to bypass proxies.
Once set-up, start the Gear Manager on your phone and search for an update for your watch.
Furthermore I requested the open-source parts of the Gear S2 at Samsung. They made available the files for the last firmware here:
opensource.samsung.com - search for SM-R720
Best regards,
- S

Ok guys, the link is now working, it was just a typo, my fail
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
Anyway, still going to check how it finds the firmware files...

Once we have the downloaded file, how do we push it to the watch?
SKFU said:
Ok guys, the link is now working, it was just a typo, my fail
fota-s3-dn.ospserver.net/firmware/DBT/SM-R732/f9cd6fdcda8e4a56b99ea23436c3224b.bin
Anyway, still going to check how it finds the firmware files...
Click to expand...
Click to collapse

It's more likely for research. Normally you simply update via the Gear Manager. Nevertheless it should be possible to upload the file via Odin as well.
There is a new version of it called NetOdin especially for non USB devices like this.
ripv2 said:
Once we have the downloaded file, how do we push it to the watch?
Click to expand...
Click to collapse

SKFU said:
It's more likely for research. Normally you simply update via the Gear Manager. Nevertheless it should be possible to upload the file via Odin as well.
There is a new version of it called NetOdin especially for non USB devices like this.
Click to expand...
Click to collapse
Have you a link to NetOdin? I can't see it anywhere

Here you go: bbs.52samsung.com/thread-737324-1-1.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ash99 said:
Have you a link to NetOdin? I can't see it anywhere
Click to expand...
Click to collapse

is this firmware update worth side loading? I don't think people on "Non Supported" devices will be able to get the update normally, so this might be the only option.
SKFU said:
Here you go: bbs.52samsung.com/thread-737324-1-1.html
Click to expand...
Click to collapse

I agree, I did not notice any major changes after the update.
As said, this is for research purpose in my view. The update *should* only be applied via the official Samsung Gear app. This update file is for the Classic Bluetooth EU version btw.
Anyway, since the files seem to be patches and not a full OS, we might not go too far with this. Mounting does not work for me, so rooting can not be applied to it, yet
If someone finds the full firmware somehow (maybe call Samsung and pretend a brick?), let us know
ripv2 said:
is this firmware update worth side loading? I don't think people on "Non Supported" devices will be able to get the update normally, so this might be the only option.
Click to expand...
Click to collapse

Interesting, someone succsessfully testet this update? I am quite interessted in this Version because of my US Version of my S2 classic. Can I overwrite es US setting for the metric system and my anguage s-voice?
I can't really deal with that fahrenheit degree.

Does this update fix the notification issues? The issues I see is when the watch doesn't show the always on screen it will not vibrate when notifications come in.

I just got the update on my s2 sport and have not really noticed any differences. It said performance so maybe the battery life will be a little better than what it already is! I'll keep playing with it to see if there are any changes I'm missing.

Got the update last night and so far, no real changes. There is susposed to be an update in November to enable Samsung Pay. Can't see that this update has that.

I can confirm that I have repeatedly been able reconnect my S2 to my Nexus 5 on Marshmallow after I installed the S2 firmware update that was available in the USA in the Gear app under the About Gear settings. I went from firmware version R720XXU2AOIL to R720XXU2AOJ3. I found that even after installing the firmware, I had to do one Light Reset on the S2 before the S2 would reconnect.
So far so good. Have intentionally gone out of range 6 times and reconnected all 6 times. Will report back if situation changes.

There is a firmware update available for the watch from the gear manager. My update was 5.30MB in size and says it has bug fixes.

[Solved] Samsung "secret" codes not working after nougat

Hi. Am I the only one who was unpleasantly surprised that the secret codes doesn't work after nougat update? I just flashed via Odin the ROM BTU downloaded from Samfirmware website and used HOME_CSC. Is something that I can do? Or someone else encountered this problem?
LE: Solved
Solution:
I downloaded the Netherlands 7.0 PHN CSC from here with Odin3_v3.12.5 https://forum.xda-developers.com/gal...-odin-t3369431
Flashed the PHN, tested the codes, they worked, then i flashed BTU from Samfirmware and all is working now.

Nerobaxxy said:
Hi. Am I the only one who was unpleasantly surprised that the secret codes doesn't work after nougat update? I just flashed via Odin the ROM BTU downloaded from Samfirmware website and used HOME_CSC. Is something that I can do? Or someone else encountered this problem?
Click to expand...
Click to collapse
Tried some on mine and they are working OK, which one were you trying?
I'm more pissed that in 7 you can no longer set a Live wallpaper to the lock screen just using default settings -> wallpaper :/

Trixster101 said:
Tried some on mine and they are working OK, which one were you trying?
I'm more pissed that in 7 you can no longer set a Live wallpaper to the lock screen just using default settings -> wallpaper :/
Click to expand...
Click to collapse
None of them works. I tried the classical *#06# for imei and it doesn't work.

Nerobaxxy said:
None of them works. I tried the classical *#06# for imei and it doesn't work.
Click to expand...
Click to collapse
Strange.. Your SIM is in yes? Dont think they work without it in.
The imei one worked for me, as well as the *#1234#

Trixster101 said:
Strange.. Your SIM is in yes? Dont think they work without it in.
The imei one worked for me, as well as the *#1234#
Click to expand...
Click to collapse
Yes it is in and everything works. Calling sms mobile data.

not work btu nougat fabrica factory firmware flash odin after tur (turkey) csc flash not work ımeı and *#1234#

If you are rooted then:
Copy INS_keystrings.dat (it depends on csc im indian so INS) from system/etc to root/etc and set permissions to rw--r--
Done

msohail_7 said:
If you are rooted then:
Copy INS_keystrings.dat (it depends on csc im indian so INS) from system/etc to root/etc and set permissions to rw--r--
Done
Click to expand...
Click to collapse
That's the thing. I'm not rooted and I don't wanna root my phone soon

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
working very well
Sent from my SM-G930F using XDA-Developers Legacy app

olafsand said:
View attachment 4012397working very well
Sent from my SM-G930F using XDA-Developers Legacy app
Click to expand...
Click to collapse
You wiped your phone when you updated?

yes stock rom for me not show secret code i flash custom rom and it work
back to stock but not work

Nerobaxxy said:
You wiped your phone when you updated?
Click to expand...
Click to collapse
Yes. I did full odin install with all 4 files.
Sent from my SM-G930F using XDA-Developers Legacy app

Is *#2683662# working ?

Nevermind. I solved it. I downloaded the Netherlands 7.0 PHN CSC from here with Odin3_v3.12.5 https://forum.xda-developers.com/galaxy-s7/how-to/official-stock-firmware-update-odin-t3369431
Flashed the PHN, tested the codes, they worked, then i flashed BTU from Samfirmware and all is working now.

Can someone, Please, help providing me with BGL CSC (it is for Bulgaria - not branded). I have downloaded the latest G930F BGL firmware from SamMobile which is multi-CSC but when I install it, it installs XEO CSC (Poland). If you could help me with advise I would appreciate it.

@rifek4, can I change the CSC with Phone Info app without rooting? I don't want to root.

@rifek4, thank for all your help. I will skip the part with the rooting because I do not want to trigger the knox and I want to use Samsung Pass/Pay, Google Pay etc. I thought that there might be a single BGL CSC file to flash or a button combination like *#272*imei# (which is not working).

i make video fix it. i hope this video can solved your problem https://www.youtube.com/watch?v=Xj2R_FYRats

Didn't work
msohail_7 said:
If you are rooted then:
Copy INS_keystrings.dat (it depends on csc im indian so INS) from system/etc to root/etc and set permissions to rw--r--
Done
Click to expand...
Click to collapse
I have the same problem on my J700F..this didnt work for me..if you have any other solution please tell me

Ahtashamdd said:
I have the same problem on my J700F..this didnt work for me..if you have any other solution please tell me
Click to expand...
Click to collapse
It should work. Have you done all the above steps?

General F721U1 Firmware Now Available

For those looking to flash their devices immediately, U1 firmware is now available via Frija and other such tools that pull from Sammy's servers. Manual Entry is required, XAA sales code.
PDA: F721U1UEU1AVGA
CSC: F721U1OYM1AVGC
Phone: F721U1UEU1AVGA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Standard MO for Samsung is to remove the Manual Entry requirement once the official launch date hits. Once that date comes, you should be able to pull it via Automatic.
Someone in the Fold 4 forum verified that current Odin 3.14.x (patched of course) works fine for flashing
Happy flashing!

Sweet! Thanks.

Thanks! Just successfully flashed this U1 firmware over my AT&T firmware, I did it with the home_csc so all my data is still there.

NguyenHuu said:
Thanks! Just successfully flashed this U1 firmware over my AT&T firmware, I did it with the home_csc so all my data is still there.
Click to expand...
Click to collapse
Good to know

Does this remove the carrier bloatware?

seattleboi1982 said:
Does this remove the carrier bloatware?
Click to expand...
Click to collapse
Yep

Does it enable bootloader unlock? I'm not usually a Samsung person but would consider it if this was the case.

Whoareyou said:
Does it enable bootloader unlock? I'm not usually a Samsung person but would consider it if this was the case.
Click to expand...
Click to collapse
Nope

theres a new version already: F721USQU1AVHH
Download Samsung Galaxy Z Flip 4 SM-F721U TMB USA (T-Mobile) F721USQU1AVHH firmware
Fast download latest Samsung Galaxy Z Flip 4 firmware SM-F721U from USA (T-Mobile) with F721USQU1AVHH and Android version 12
www.sammobile.com

That's a U not a U1.
Frija still not picking up anything with automatic selection yet for me.

Does flashing this u1 firmware over u device have negative repercussions? Would the device still get updates as they're released for u1?

Yes

thelostsoul said:
Does flashing this u1 firmware over u device have negative repercussions? Would the device still get updates as they're released for u1?
Click to expand...
Click to collapse
1. Could have negative repercussions, yes. Depends on the way that you tend to use your device. If you don't like it, you can flash right back to U
2. Yes, U1 updates work as normal

I flashed and now I have att bloatware on my device. Is this normal?
ahh, just realized I probably downloaded a different file.

iBowToAndroid said:
1. Could have negative repercussions, yes. Depends on the way that you tend to use your device. If you don't like it, you can flash right back to U
2. Yes, U1 updates work as normal
Click to expand...
Click to collapse
How would I go about flashing back to U? everything I've seemingly tried has yielded nothing in Frija.
I'd rather have 5G+ on the ATT firmware/

thestalkingocelot said:
How would I go about flashing back to U? everything I've seemingly tried has yielded nothing in Frija.
I'd rather have 5G+ on the ATT firmware/
Click to expand...
Click to collapse
SamFW.com is great for firmware, but they're not gonna have an AT&T USERDATA file. I'm not sure if everything will work properly without it. I have a source that can get me Samsung firmware for any USA device, but I have to pay him for each one

iBowToAndroid said:
For those looking to flash their devices immediately, U1 firmware is now available via Frija and other such tools that pull from Sammy's servers. Manual Entry is required, XAA sales code.
PDA: F721U1UEU1AVGA
CSC: F721U1OYM1AVGC
Phone: F721U1UEU1AVGA
View attachment 5696345
Standard MO for Samsung is to remove the Manual Entry requirement once the official launch date hits. Once that date comes, you should be able to pull it via Automatic.
Someone in the Fold 4 forum verified that current Odin 3.14.x (patched of course) works fine for flashing
Happy flashing!
Click to expand...
Click to collapse
Thanks!

New verizon firmware is posted... https://www.sammobile.com/samsung/firmware/SM-F721U1/VZW/download/F721U1UEU1AVIA/1683640/

Flashed
lafester01 said:
New verizon firmware is posted... https://www.sammobile.com/samsung/firmware/SM-F721U1/VZW/download/F721U1UEU1AVIA/1683640/View attachment 5724193
Click to expand...
Click to collapse
Flashed and was able to enable WiFi-calling with US Mobile that I previously didn't have the option with July update. This is OneUI 4.1.1 btw, and the bottom of the screen is reserved for taskbar which is NOT enabled for Flip 4 so you get a black bar at the bottom in apps, just so you know.

This morning my flip4 finally received the September security patch along with firmware F721U1UEU1AVIA through OTA. My flip4 is an unlocked US phone, I'm on West coast. I haven't noticed any changes yet.

How To Guide Get One UI 5 Update on XAA

Download Samfw Frp Tool
Remove Sim card but keep wifi on
Change CSC to TMB
Check for update and install
Insert Sim card back and CSC will change automatically to XAA
NO DATA WILL BE LOST

I went from AVG6 ATT and switched to T mobile and im getting upgrades. Lets see if it goes up to A13.

Running that FRP tool on Virus total produced 5 hits... I'd double check the reliability of that tool before installing and hooking up your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

creedicd said:
Running that FRP tool on Virus total produced 5 hits... I'd double check the reliability of that tool before installing and hooking up your phone.
View attachment 5750897
Click to expand...
Click to collapse
Haven't checked it myself but they provide virustotal link on their website and it wasn't showing malware

creedicd said:
Running that FRP tool on Virus total produced 5 hits... I'd double check the reliability of that tool before installing and hooking up your phone.
View attachment 5750897
Click to expand...
Click to collapse
Pretty much all tools like that will have some hits, in at least one database, due to the exploits that they use. Doesn't necessary mean that it's malicious

How do you find the latest stock firmware for USA, I tried XAA/ATT/TMB with Frija but didn't work.

bobimbap said:
How do you find the latest stock firmware for USA, I tried XAA/ATT/TMB with Frija but didn't work.
Click to expand...
Click to collapse

iBowToAndroid said:
View attachment 5751643
Click to expand...
Click to collapse
Thank you sir!! I found out the problem was my model is SM-S908E so that's why.

bobimbap said:
Thank you sir!! I found out the problem was my model is SM-S908E so that's why.
Click to expand...
Click to collapse
Why are you looking for USA firmware, for a non USA phone? That's not how it works

iBowToAndroid said:
Why are you looking for USA firmware, for a non USA phone? That's not how it works
I bought it overseas. I thought it would work by using my carrier stock firmware.
Click to expand...
Click to collapse

The only non USA devices that you can flash USA firmware to are Canadian devices

This is so awesome, i'm so glad that this was just recently posted. I just received my phone a couple days ago with S908U1UES2AVI5. I followed the steps from the OP and immediately was able to download and install the update. It is currently on the black screen with the android updating progressbar, waiting for this to finish.
Edit: Just to note that I have XAG
Edit2: Updated to S908U1UEU2BVJA
Thanks!

has anyone got November security update post ONE UI 5?

DoctorNasty said:
Download Samfw Frp Tool
Remove Sim card but keep wifi on
Change CSC to TMB
Check for update and install
Insert Sim card back and CSC will change automatically to XAA
NO DATA WILL BE LOST
Click to expand...
Click to collapse
Could u possibly post the link to download it. Srry new at this and just wanna be sure iam downloading the right thing lol

kayjo said:
Could u possibly post the link to download it. Srry new at this and just wanna be sure iam downloading the right thing lol
Click to expand...
Click to collapse
https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
Here u go.
But this version didn't worked for me, so I had to use older version.

I threw in a Tmobile simcard and the update went through, then after the install I swapped back my original Sim.

DoctorNasty said:
https://samfw.com/blog/samfw-frp-tool-1-0-remove-samsung-frp-one-click
Here u go.
But this version didn't worked for me, so I had to use older version.
Click to expand...
Click to collapse
Yeah i can't figure out what in doing so guess I'm not gonna do it lol

kayjo said:
Yeah i can't figure out what in doing so guess I'm not gonna do it lol
Click to expand...
Click to collapse
It's really easy. Enable USB debugging in developers mode, plug in phone to your PC and open FRP Tool, write TMB in CSC field and press change CSC. That's it

Ok, seems that it's time to stop waiting and just use what we have on hand here.
Im on factory unlocked S908U1, in Europe, with European SIM.
Build number: SP1A.210812.016.S908U1UES2AVI5
Service provider software version:
SAOMC_SM-S908U1_OYM_XAA_12_0028
XAA/XAA,ATT/ATT
Here I'm puzzled, because I've never used eSIM, and it shows ATT for some reason.
Question for more experienced members here:
Is there any problem for me to update with TMB? If it's all the same, why we are waiting so long updates for unlocked s22?

draskome said:
Ok, seems that it's time to stop waiting and just use what we have on hand here.
Im on factory unlocked S908U1, in Europe, with European SIM.
Build number: SP1A.210812.016.S908U1UES2AVI5
Service provider software version:
SAOMC_SM-S908U1_OYM_XAA_12_0028
XAA/XAA,ATT/ATT
Here I'm puzzled, because I've never used eSIM, and it shows ATT for some reason.
Question for more experienced members here:
Is there any problem for me to update with TMB? If it's all the same, why we are waiting so long updates for unlocked s22?
Click to expand...
Click to collapse
Change CSC to TMB and you'll get update. Don't forget to remove Sim before changing it