Alright, so here goes. I've searched the thread for the issue I'm having, but have come up empty handed. I'm not Droid noob, especially not when it comes to flashing roms. But, here are the details I have.
I had been following dragonzkiller's development on his ICS rom. I hadn't really put forth any effort looking lately until yesterday, and saw that he had the wifi and camera fixed, which were really my two biggest issues, so when I saw that, I was excited. I began working on getting it all running. I've had the x2 for about 5 months or so, and usually, the first thing I do, as soon as I get a new phone, is root it. Back in April, I rooted with GingerBreak. Worked good, no issues there. Back in June, apparently I still received the OTA update taking it to 2.3.5-418, which I found out last night had kinda broken my root. So, I went back to find a way to re-root. I did that, with a desktop .exe that went in, and was supposed to flash BSR to my phone also. After I ran that, all my root permissions started asking for options again, so I was relieved. Now, for the issues I'm having.
I downloaded an app in the play store called Online Nandroid Backup. For some reason, and I think this may be a dev issue with the app, it won't run a backup, and tells me that it wasn't able to be granted superuser permissions, even though it is prompting and I'm allowing. Issue number two is this. I've tried 3 different ways to get this working. I used ROM Toolbox Lite, selected the rom I wanted to flash, and wipe data and cache, no delvik. I've selected to run a backup of my current rom. When it boots into recovery, I only have 4 options. Reboot your phone, something about installing the rom from sdcard, wipe data, and wipe cache. I'm not given the backup option on the recovery. Furthermore, when I kinda just decided that since I hadn't had any trouble flashing a rom to any of my other phones I've had, I would just try to flash the rom, it gives me a prompt about 25% through the rom package saying E: signature could not be verified, or something to that extent.
Even though it has said not to use Rom Manager, I did download that and try that, and got pretty much the same outcome of no rom, just a bit different scenario going through. Rom Manager won't reboot into recovery, and when I select to do a backup, it reboots the phone straight up. I also used the manual entrance into recovery, volume up, but it tells me something about starting RSD protocol, and sticks at that forever.
My real questions are this... I've always ever used CWM. All of my previous phones have been supported by Rom Manager nicely, so when it came to downloading and flashing a rom on them, no problems at all. I have never used BSR, to my knowledge, so I'm not sure if the recovery screen I'm seeing is the actual BSR recovery, or if it's some other recovery. If it's not BSR, do I just flash it like I would a rom, then re-run into that? And does the signature issue that I'm running into mean that I have to wait for a signed version of the rom in order to work it? Is there any way to fix this issue, or am I basically SOL right this moment? Any information on how I can fix all of this would be greatly appreciated. Thank you.
Related
First.. I want to say hello and that i've been reading around these forums for quite a while since I got my Droid about a year ago. I haven't posted anything till now.. but that's only because everyone else usually get's the answers typed faster than me. lol
On to the problem... I think I screwed up. I JUST bought this thing today. I got a little too excited about getting this tablet rooted and might have jumped the gun a little. I used the apk that has been around to root. No problems there. I got ROM Manager loaded... and I ended up flashing the newest recovery from there before realizing that everyone else says to use something else.
So... at this point, i'm unable to reboot into recovery at all. It starts up, acts like it's about to, and then just reboots again into the OS instead. Is there a way to fix this and get it on the correct recovery image or have I totally screwed myself over? Maybe through ADB? I can only tolerate this horrid TnT OS for so long. Took me 20 minutes to get it to update without a FC... Browser, weather, calendar, and a bunch of other stuff FC on me when I tried starting.. Fortunately, those issues are less frequent with the update, but still not working keeping.
I need some "stock(CyanogenMod)" Froyo goodness.. lol I can't have my year and a half old phone outclass this tablet for too long. If anyone can offer any help on this, I would greatly appreciate it.
The good news is you are still booting into the OS, so I doubt you've screwed anything up too bad. Most likely Clockwork Mod just never flashed so you are still running with the gimpy stock recovery and it's puking on the update.zip file you have on your internal sd card for some reason.
First suggestion is get a copy of Clockwork Mod 0.8 and try installing it. The instructions here are geared toward installing from an external from an external MicroSD card: http://forum.xda-developers.com/showthread.php?t=865245 I am not certain why they say that's the only way to do it, since I never did it that way.
I just downloaded this: http://www.mediafire.com/?dvleg4oatkfxm7w and stuck the update.zip and recovery folder into my /sdcard directory, then turned my tablet off, then held down Vol+ and turned it back on. Clockwork Mod should install itself and boots into Clockwork Mod, and that was that.
I never used ROM Manager at all on my G Tablet, so I can't speak to doing anything that way, but I would stick with the tried and true methods at least until you have Clockwork Mod running.
If that fails and you really can't get any recovery working, maybe something did get botched and you might need to use nvflash to fix it, but I doubt it.
Once you get Clockwork Mod running properly, just copy over the update.zip for TNT Lite or Vegan ROM, flash, and wipe data, then you should be good to go.
Worked perfectly and entirely from the tablet! I installed CM6.1 and I'm a bit upset at the lack way it looks, but then, its packed for smaller screens, so I understand. Thank you for the quick reply. I'm off to try TnT Lite now.
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
DANOinSD said:
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
Click to expand...
Click to collapse
Depending on what ROM your flashing if your trying to do the update from OTA then you have to have a 100% no bloatware removed rom, my suggestion is to download the one @ motodev and then flash 3.1 and update all the way to ICS (if wanted) otherwise I believe that when you get the (!) in recovery you can press once pwr+up fast (don't hold) and it will display the recovery window with the error message that's preventing you from upgrading.
after flashing the recovery, did you reboot into android and then into recovery? if yes, don't!
you have to reboot into recovery right after flashing the recovery.
Hi All,
Thanks for the feedback, I finally got recovery pushed and booted, along with root on 3.2.6.
As llama points out you must reboot into recovery upon rebooting from fastboot. I don’t believe this was a requirement previously. But once I did that, all was fine.
I’ve done this a thousand times before and even in my old notes I couldn’t find any reference to booting into recovery immediately after pushing the recovery.img. Is this something new with this update or has it always been this way? Call me crazy, but I can’t ever recall scrambling to catch the reboot and get into recovery before re-launching Android. I always rebooted in Android and made sure it actually loaded to ensure something didn’t get hosed, then I would reboot into recovery and flash the root zip.
DANOinSD said:
Is this something new with this update or has it always been this way?
Click to expand...
Click to collapse
as far as I know, this is a 'feature' introduced with every ota-update. To my knowledge: get a xoom from a store and flash recovery right away-> everything is good; have the xoom install an ota-update and flash recovery afterwards -> do it this way
So it look like the JB OTA update is here for the USA. Mine is rooted, and has already download the update, but I haven't applied it yet, as I'm rooted and I don't know if I have to do something special first.....
Any one have any info on this?
Same Boat !!
Me too in same boat with P3113.See the post below yours :crying: Hope experts replies soon.
I went ahead and installed it on my daughters tab. CWM protected itself, and root. I'm still poking around, but thus far no issues beyond it says "update failed" but clearly didn't.
I'm wondering if I should remove CWM and unroot it first...
Run a nandroid real quick, back it up to your computer, and let 'er rip. Like I said, it's working perfectly for me. Then again my daughter is 7, so losing all her data isn't really a problem.
Updated with Root ?
sheepdog elite said:
Run a nandroid real quick, back it up to your computer, and let 'er rip. Like I said, it's working perfectly for me. Then again my daughter is 7, so losing all her data isn't really a problem.
Click to expand...
Click to collapse
So if i understand correctly , you allowed the OTA with root and it wiped data ? I am suprised it installed with Custom recovery !!!
I have over 200 user apps. Will i retain those Apps (dont mind data being wiped)
No, it didn't wipe data. I wasn't worried about it "if" it did, because it's my daughters, and I have TIBU for all her games from like last week.
Just to be perfectly clear. NOTHING went wrong. It installed the new O.S., booted fine, said the update failed, but the update didn't fail. Probably because CWM preserved root, and bootloader, so verification failed.
I ran it..... It updated thru CWM... Once done said update failed, but I had a new agreement to agree too. Sys info says its running 4.1.1.
If I have and issue, ill update here.
Failed for P3113
Based on your experience thought I would try too... Unfortunately failed miserably... I have Cwm 6.0.2.3 and attached is the crash log... Maybe some experts can give their views..
I guess I'll post my successful config just for the sake of comparison.
I'm currently running CWM 6.0.1.1. The tab was rooted with a file called gtab2_jellybean_rooter (think I got it from XDA, but i'm not positive) and had no other modifications/roms/etc.
If you're running any sort of ROM you're definitely boned, gotta wait for a ROM update. Beyond that, I'm not really sure what to say
To do the proper update, you should un-root and then re-root once done. That way you get the full support with your update if needed.
I am rooted, running CWM 6.0.2.3. I accepted the update and hit the install thinking that it would fail just as it does on a rooted SIII. The notification said the install had failed, but as others here have indicated, it appears as though the install was successful. I retained root and all seems to be normal; with one exception: It appears that the Tab no longer "sleeps" but shuts down completely. Regardless of whether I turn it off with the power button (short press) or if the screen simply goes to sleep, I have to long press the power button and it goes through a full boot.
Is anyone else experiencing this? Is there a setting I am missing? I am not a noob at rooting, etc. as I have been doing it since my OG Droid on Verizon, but it surprised me when the update seemed to install (even Google Now is working), and I am stumped about this "shut down" that seems to happen.
I experienced the same thing. I was rooted and had installed CM10, went back to original backup, using latest CWM. I hit system update and it downloaded the update, asked me to continue. CWM asked me if I wanted to install unsigned zip, I accepted, and it went through. At first boot it said update failed, but like everyone else, it went through. I have had no issues at all. My tab goes to sleep correctly.
Have peace in mind.
I finished updating (unfortunately, the battery was 9%, so I had to wait for an hour to charge before doing anything) and I got "failed" error like everybody got, but the system shows 4.1.1 and the performance is improved, and I applied root again.
I've been doing research on this for a while, and I decided to sign up and ask about this question. Majority of the topics here dealing with bricking either have solved it because of access to fastboot, or some users have given up and either retired their devices or sent them in to ASUS.
Long story short, I installed Clockwork Recovery Mod and Cyanogen mod with no issues. After a couple of weeks, I decided I wanted to go back to stock. I did some research and found a topic which said I needed TWRP in order to flash back the stock ROM. I installed TWRP, but some things seemed to have gone awry with that install and I no longer have access to the fastboot menu and the tablet keeps booting straight into recovery.
I can load new roms by pushing them with adb, but when I try to reload the stock mod it just reboots and nothing gets installed. I tried to sideload a rom, but my version of TWRP doesn't have that feature (I have 2.2). So far, I think I can get it back on track if I could somehow install a new recovery, or start my device from scratch somehow.
Also whenever I transfer to device memory, if I reboot the tablet, everything gets erased and the log is littered with errors about not being able to find and mount /data. From what I've read, it should be solved with a simple format of the file system. However, all of my attempts to use the recovery's built in wiping/formatting tools have ended with no success. If I put in a microSD, that gets wiped as well so in order to load a ROM, I have to push it using adb.
I thought I had fully bricked it, but it seems that since it's accessible through adb, it's still somewhat fixable. I know about backing up everything with nvflash, now, I guess I just didn't do enough research before getting into this. Any ideas, feedback, is appreciated, so far I'm learning a lot about android devices from this experience.
lino4 said:
I can load new roms by pushing them with adb, but when I try to reload the stock mod it just reboots and nothing gets installed. I tried to sideload a rom, but my version of TWRP doesn't have that feature (I have 2.2).
Click to expand...
Click to collapse
Where did you dig out this ancient TWRP version? It is not compatible with the current bootloaders and cannot access the internal storage at all - that's why all your installation attempts are failing.
Read this thread, it deals with a similar problem: http://forum.xda-developers.com/showthread.php?t=2291974
_that said:
Where did you dig out this ancient TWRP version? It is not compatible with the current bootloaders and cannot access the internal storage at all - that's why all your installation attempts are failing.
Read this thread, it deals with a similar problem: http://forum.xda-developers.com/showthread.php?t=2291974
Click to expand...
Click to collapse
Yeah I found that thread not too long ago, I pushed the bootloader and was able to load the stock rom and get everything going.
Hello. This looks like the place I can get the best help.
Got a Xiaomi Mi5 last week - cheap and very cheerful. Having read online about possible fake roms and bloatware I thought the safest option would be to load the official stable rom to be safe.
Attempt 1
Following the MIUI guidance I downloaded the ROM, copied it to my phone in Windows explorer and then used the MIUI updater tool within the phone to load the new ROM.
http://en.miui.com/a-232.html
Everything went swimmingly for a couple of hours, but then the phone began crashing.
Attempt 2
By this stage I realised the above method was no longer available to me. So I got unlocking privalidges, unlocked my phone. Then, using MiFlash I flashed the latest ROM to the phone. Now the crashing problems happen within about a minute. It actually froze the screen first time round so I did it again.
Added fun issue - left my phone on overnight to charge. And it had stopped charging at 58%.
Attempt 3
Downloaded the EU MIUI Rom. Accessed TWRP in my phone and tried to use it to wipe and install. Not sure the wipes were fully effective - got a lot of red writing. And when I went to install the new ROM the internal storage was 0MB.
Had a look at guidance, and I forget what I did, but was finally able to see the zip file on my phone through TWRP. I got the "7" error. Have read how to fix this but seems too risky considering whats gone before.
Desired solution
I would just like any ROM on my phone which works. Don't really care which, I have followed each guide religiously. It may well just be a faulty phone but I don't want to send it back to China without ruling out the problem being me screwing with the software. Especially as I assume i've technically voided warranty... (I can reload Global Developer and relock it though so have hidden it pretty well. Only difference I can tell is that I now get a menu in recovery mode when before I got instruction to go to PCsuite).
Also - I seem to remember there originally being a downloaded_rom file in the internal memory which is no longer there. If im sending it back do I need to recreate one to hide my activity?
Appreciate any advice.
Moley1985 said:
Hello. This looks like the place I can get the best help.
Got a Xiaomi Mi5 last week - cheap and very cheerful. Having read online about possible fake roms and bloatware I thought the safest option would be to load the official stable rom to be safe.
Attempt 1
Following the MIUI guidance I downloaded the ROM, copied it to my phone in Windows explorer and then used the MIUI updater tool within the phone to load the new ROM.
http://en.miui.com/a-232.html
Everything went swimmingly for a couple of hours, but then the phone began crashing.
Attempt 2
By this stage I realised the above method was no longer available to me. So I got unlocking privalidges, unlocked my phone. Then, using MiFlash I flashed the latest ROM to the phone. Now the crashing problems happen within about a minute. It actually froze the screen first time round so I did it again.
Added fun issue - left my phone on overnight to charge. And it had stopped charging at 58%.
Attempt 3
Downloaded the EU MIUI Rom. Accessed TWRP in my phone and tried to use it to wipe and install. Not sure the wipes were fully effective - got a lot of red writing. And when I went to install the new ROM the internal storage was 0MB.
Had a look at guidance, and I forget what I did, but was finally able to see the zip file on my phone through TWRP. I got the "7" error. Have read how to fix this but seems too risky considering whats gone before.
Desired solution
I would just like any ROM on my phone which works. Don't really care which, I have followed each guide religiously. It may well just be a faulty phone but I don't want to send it back to China without ruling out the problem being me screwing with the software. Especially as I assume i've technically voided warranty... (I can reload Global Developer and relock it though so have hidden it pretty well. Only difference I can tell is that I now get a menu in recovery mode when before I got instruction to go to PCsuite).
Also - I seem to remember there originally being a downloaded_rom file in the internal memory which is no longer there. If im sending it back do I need to recreate one to hide my activity?
Appreciate any advice.
Click to expand...
Click to collapse
Greetings and welcome to assist. Xiaomi phones are encrypted by default so you need to wipe your phone in fastboot to access your storage again and you also need to flash latest su zip to disable dm verity. That should clear you internal memory issues and allow you to flash a zip through twrp
Good Luck
Sawdoctor