help!! - Samsung Galaxy S (4G Model)

Hello I'm having some trouble. I tryed to flash cm9 and cwm told me that the zip file was bad, so I tryed to restore and my phone gets stuck at the start screen '' galaxy s 4g'' screen. I removed the battery and got it into download mode and replaced the files ive forgot what buttons to hold down to get it into cwm any ideas

First confirm you have a good download by checking the md5. Then try flashing, making sure you have "skip verifying zip files" to checked, or whatever the CWR option is.
Posted from my SGS4G, thanks to Team Acid development

Its a little late now, I'm looking though a bunch of bricked post atm. I can get the phone to downlaoding mode but thats about it. I was sure there was a way to get it to cwm by holding some buttons. It goes to the start screen and thats about it
Bryan made a one click back to factory that I just used. I need to be pointed in his drection so I can buy him a beer!

Tunderpimp said:
Its a little late now, I'm looking though a bunch of bricked post atm. I can get the phone to downlaoding mode but thats about it. I was sure there was a way to get it to cwm by holding some buttons. It goes to the start screen and thats about it.
Click to expand...
Click to collapse
if you can get to download mode then it means your semi brick....
if you want to go back to recovery mode, hold power and volume up+down for like 4 second and release the buttons.
if you can get to recovery, you can always mount the phone and download the cm9 in your computer and transfer it to your phone again.
if you can't, use download mode and use 1-click heimdall or gremlin remover and go back to stock GB and redo flash back to cm9

The combo is hold vol up and down, then power... Thing is that phone can't be plugged to computer or it will keep getting on download mode.
*You can just hold vol up and down, then connect usb from computer to phone and it will go to download mode.
*Obviously, phone must be off in order to do this.

Tunderpimp said:
Bryan made a one click back to factory that I just used. I need to be pointed in his drection so I can buy him a beer!
Click to expand...
Click to collapse
He came, he searched, he... updated his second message:
(Last edited by Tunderpimp; Today at 05:56 PM.)
He oneclicked back to stock like a champ.
My favorite part was you searched... Already, you're my favorite newb!
GJ!
Thanks truly goes to:
AdamOutler (Thanks for making my working Sgs4g UnBrickable and for One-Click, and One-Click-Packager!)
Benjamin Dobell (and everyone that worked on Heimdall!)
Well, and RaverX3X and FBis251 for helping me get all the right files in the same place at the same time.
I'm more of an orchestrator of unbrickedness.
But, hey. I like beer!

Related

Epic Recovery Mode & Download Mode

Just FYI in case anyone wants to know:
For download mode, with the phone turned off, phold the number 1 key on the QWERTY keyboard and the power button simultaneously
For recovery mode, with the phone turned off, hold Volume Down, CAmera, and Power simultaneously.
You navigate with volume UP/DOWN, select with HOME, Menu toggles to "Manual Mode", whatever that it.
Enjoy
chris5h said:
Just FYI in case anyone wants to know:
For download mode, with the phone turned off, phold the number 1 key on the QWERTY keyboard and the power button simultaneously
For recovery mode, with the phone turned off, hold Volume Down, CAmera, and Power simultaneously.
You navigate with volume UP/DOWN, select with HOME, Menu toggles to "Manual Mode", whatever that it.
Enjoy
Click to expand...
Click to collapse
What is download mode?
Download mode is the mode you put the phone into to be able to flsh new software to it from a pc. Anyone going to this phone from the Moment will know exactly what it is.
is it a ms-mount?
ImSoHungry said:
is it a ms-mount?
Click to expand...
Click to collapse
I am sorry, I do not know what that is.
chris5h said:
I am sorry, I do not know what that is.
Click to expand...
Click to collapse
Mass Storage mount... Basically, does download mode turn it into a mass storage USB device?
Oh I gotcha. No it does not.
had epic 2.1.1 rooted with one-click method from sdx, seemed fine after superuser and busybox install or several hours.
HOWEVER, after installing Lauchad (maybe coincidence), my phone went into a cont. reboot every 30sec about. I managed to uninstall some recent apps with no avail.
I am doing a recovery/wipe-factory now....seems hung at little image of package opening with droid logo....
Should I force power-cycle?
Thanks!
I entered Download Mode and its stocked at Downloading. Do not turn off target. Is this the main screen?
Edit: Yes. Thats the Main Screen.
Hmm.. So we only need someone to create the Update.zip?
Quick question. I entered download mode.. I got the downloading! do not turn off target!!! How do I get out of this screen??
lilmexx said:
Quick question. I entered download mode.. I got the downloading! do not turn off target!!! How do I get out of this screen??
Click to expand...
Click to collapse
Either use Odin to flash a new rom, or pull your battery out of the phone. As long as it's not mid-flash, you can turn it off without consequence. Obviously if you were flashing a rom, you wouldn't want to be pulling the battery out in the middle of it, of course...
FYI this mode isn't something anyone should need to access regularly. Please see this post for more information on the use of Download mode and how to return your phone to stock.
Fixter said:
I entered Download Mode and its stocked at Downloading. Do not turn off target. Is this the main screen?
Edit: Yes. Thats the Main Screen.
Hmm.. So we only need someone to create the Update.zip?
Click to expand...
Click to collapse
Update.zip? You mean for Recovery mode? No, that's not necessary for custom roms or anything... You would want to use Clockwork recovery, not the stock recovery, and the .zip can be named anything. Update.zip is generally how the stock recovery flashes an OTA update after it's downloaded. If I recall, it has to pass a checksum before it'd flash - you couldn't just zip some files together and call it "update.zip" and expect it to work. With Clockwork Recovery you would.
Thank you very much... Yeah it was not mid flash, which would be way worse. I am just getting accustomed to all the different menus and various screens. I got into the mode, just to give it a try and was worried about just pulling the battery. Didnt think it would really matter since i wasnt flashing or anything. But figured I would ask first to save some headaches. Trying to read up and learn all I can about this thing. Clockworked and rooted, getting ready for the first rom go!

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

Strange icon on my Startup Infuse 4G

I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
I believe this is in the wrong forum but I understand your panic. Don't take my word for this but I believe you need a USB jig to get out of this. Or unless try this:
1. Pull battery for 15-20 seconds
2. Re insert battery
3. Hold volume up/volume down while plugging in USB cord from computer
4. If it succeeds you should be in download mode!
P.s. Sorry if you have already done this, i'm just attempting to help you troubleshoot
Sent from my SGH-I997 using xda premium
I believe this is what you're seeing..
http://img196.imageshack.us/img196/3323/20101211170056.jpg
Sent from my SGH-I997 using xda premium
Like rominator was saying pull battery hold volume buttons replace battery insert USB cord will turn on in download
Sent from my SAMSUNG-SGH-I997 using XDA App
theROMinator said:
I believe this is what you're seeing..
http://img196.imageshack.us/img196/3323/20101211170056.jpg
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
phoneman108 said:
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
Click to expand...
Click to collapse
Uhh, I haven't gotten stuck on that on my Infuse I don't think, but with the Captivate the solution was to hold vol + and - and power at that screen until it rebooted, then let go of power and it would fall back to download mode.
And yes, this is not development and should be in the general section.
phoneman108 said:
Thank you for the suggestion. Yes, that is the exact thing I am seeing and No, that Vol Up + USB insert still gives the same icon.
What is a USB jig? and where do I get it?
Many thanx and sorry for posting it in the wrong forum... perhaps, admin can move to the right one.... yes, it was panic.
Click to expand...
Click to collapse
EDIT: Did you hold BOTH volume up and down as you plugged in the usb?
USB Jig
http://www.amazon.com/gp/offer-listing/B0053H73JQ/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all
It's been reported here in the forums that IT DOES work. You might want to search around to confirm that. Or, if you want quick help you can possibly explain more of what you did to get your phone to this point.
Jig Does work!!!
i made at the job not to long ago....took me a while to get the right resistance, but it got it into download mode.
theROMinator said:
EDIT: Did you hold BOTH volume up and down as you plugged in the usb?
USB Jig
http://www.amazon.com/gp/offer-listing/B0053H73JQ/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all
It's been reported here in the forums that IT DOES work. You might want to search around to confirm that. Or, if you want quick help you can possibly explain more of what you did to get your phone to this point.
Click to expand...
Click to collapse
Yes, I meant to write Holding BOTH Vol+ and - and USB insert.
Here are the steps that I got me here... one step is completely stupid....
1. Yesterday, I was trying to get 3e recovery, so got the zip file
2. MISSED this step - of Copying the recovery file to SD Card.
3. Renamed the old recovery in the bin folder to _old
4. Rebooted and then used the ROM Manager to reboot into Recovery.... Bad idea - The phone went blank....
5. Only solution I saw was to ODIN in the GTG's Ultimate unbrick.....
6. Went into Download Mode....
7. ODIN sees the COM Port.
8. Loaded the .pit and other files per instructions....
9. Pressed START
10. ODIN reports failed.
11. Unhooked the USB and HARD rebooted.... Arrived at this icon.
Yes, i am a noob and am paying for my mistake of overlooking a step.
You could possibly try heimdall... do you have kies installed (only needed for drivers)? Hmm, I couldn't help you any further w/o actually being there
Definitely keep me posted!
I have bricked my phone a few times now . Same error screen and everything, just do the vol + and vol - down trick , let it boot to the error screen and startup odin 1.8 or higher. That part is very important. Odin 1.8 will recognize it as a serial device and write the software . Good luck!
I've been in that icon, but I just tried back with Odin gtg's unbrick and it went through perfectly as always. I got there because I forgot to select the pit file and Odin started to download and it failed.
I think that symbol is the same download mode but in this case you must use Odin because the phone can't startup itself. Just don't panic if it worked for me then it would work for you.
Sent from my SGH-I997 using XDA Premium App
Nopcodex90 said:
I have bricked my phone a few times now . Same error screen and everything, just do the vol + and vol - down trick , let it boot to the error screen and startup odin 1.8 or higher. That part is very important. Odin 1.8 will recognize it as a serial device and write the software . Good luck!
Click to expand...
Click to collapse
weird because I have used odin 1.7 with success each time..
Oh yeah, that error screen is a download mode isn't it? I forgot about that. So just use unbrick from there or flash something else you want.
AJerman said:
Oh yeah, that error screen is a download mode isn't it? I forgot about that. So just use unbrick from there or flash something else you want.
Click to expand...
Click to collapse
Yeah, that error screen is download mode, just like the usual "Construction Android" screen, with one difference:
The phone is forcing download mode because it knows it's hosed up. It's saying "flash something with Odin or you're not going anywhere".
So you're already in download mode - no need for button combos, the phone realized you needed it and went straight there for you.
BTW this doesn't belong in Development.
re: its not bricked!!!
phoneman108 said:
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
Click to expand...
Click to collapse
Its not bricked!!!
Those symbols only mean that it did not finish the last operation/flashing
Its the same as download mode.
So go back into those "Cell Phone ........Exclamation Mark (in orange).......... Computer"
Which is download mode and start a new flash of the Ultimate Unbrick.
Good luck, be sure to to put PIT to PIT PDA to PDA and PHONE to PHONE
in odin!!!
GOOD NEWS.
That was simple... Followed the suggestions from Nopcodex90 , Mrjunky and all....
Just started ODIN, loaded the PIT, PDA and PHONE files and off it went and am back alive........
You all are so helpful... Thank you all..... I learnt valuable lessons today.....
Now, if I may request the Admin to please move this post to the correct forum ......
phoneman108 said:
I think i BRICKD it.....
I was performing a Restore to STOCK using Odin 3 v 1.7 and the GTG's UNBRK files from here.
The process failed while the phone was in Download mode.
Now all I get is
An icon which looks like
A Cell Phone ........Exclamation Mark (in orange).......... Computer
The phone is not responding to any of the buttons:
1. No power down... I have to remove the battery and then no matter what I do, power on or else, it shows the same icon
Any one else been here?
Any way to FIX this or am I SOL?
Click to expand...
Click to collapse
That icon is a form of download. You can still connect to odin amd use ultimate unbrick
looks like i some beat me to it. Glad to see your back
Sent from my SAMSUNG-SGH-I997 using xda premium
That happened to me other day I just plugged it in Odin like that and it recognized it and did gtg unbrick back to stock, try to restart Odin and try plugging it in like that and see if Odin recognizes it, it recognized mine
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Take out the battery, put battery back in, hold both volume buttons, continue holding and plug in usb. You should be in download mode, now retry odin with GTG ultimate unbrick.
This phone is never really bricked, ive flashed a wrong bootloader using heimdall and nothing would turn on and i was still able to odin back to stock.

Help( hard brick)

I installed CW9 without installing kernal it's stock in the logo.I put a new CM9 with a new kernal. i installed both and rebooted .It's hard brick now.No boot no download mode no recovery.
Our ROMs have kernels built in so I'm a bit confused
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Very nice! Do some research
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Dylan Bay said:
I installed CW9 without installing kernal it's stock in the logo.I put a new CM9 with a new kernal. i installed both and rebooted .It's hard brick now.No boot no download mode no recovery.
Click to expand...
Click to collapse
Wait, did you install a CM9 ROM on top of an existing, different CM9 ROM without wiping? If so, you're done. JTAG or warranty.
Are you 100% sure you can't get to download mode?
Is the phone boot looping at the Samsung logo?
If so... try to time holding the VOL + and VOL - while the phone is fully off.
You may have to turn the phone off (and back on) while holding VOL+ and VOL- to "extra confirm" the phone is seeing VOL+ and VOL- being held down on first boot.
Just remove the holding the power after you have confirmed this to prevent phone from just turning on/off constantly.
I had this happen to me with my Infuse after getting rainbow color recovery.
It might sound little tricky but (it's easy) I was able to get download mode by timing it right as I explained above.
Let us know if this helps.
We need more details I think
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
sb0 said:
Are you 100% sure you can't get to download mode?
Is the phone boot looping at the Samsung logo?
If so... try to time holding the VOL + and VOL - while the phone is fully off.
You may have to turn the phone off (and back on) while holding VOL+ and VOL- to "extra confirm" the phone is seeing VOL+ and VOL- being held down on first boot.
Just remove the holding the power after you have confirmed this to prevent phone from just turning on/off constantly.
I had this happen to me with my Infuse after getting rainbow color recovery.
It might sound little tricky but (it's easy) I was able to get download mode by timing it right as I explained above.
Let us know if this helps.
Click to expand...
Click to collapse
Bro i try to put in download mode .It won't and i try to put it in recovery it won't .I put jig to put it in download mode it won't it.I don't know what to do ...
I think JTAG can get the boot for me.
Dylan Bay said:
Bro i try to put in download mode .It won't and i try to put it in recovery it won't .I put jig to put it in download mode it won't it.I don't know what to do ...
I think JTAG can get the boot for me.
Click to expand...
Click to collapse
If you can't get anything to turn on at all, yeah, you're hard bricked. JTAG or warranty it out.
In the future, and I know you were told by prbassplayer to do this in another thread, use Google Translate and read everything before flashing. I'm absolutely certain that your phone was bricked by user error, and that's so easy to avoid. Read the stickies, read the ROM thread, follow instructions to the letter. 99.9% of the time, you will not brick if you do those three things.
That sucks bro your lucky JTAG is only 50 bucks
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I think I bricked my SG4GS (SGH-959v)

Hello everyone I am back again with a galaxy this time
I used this guide to root my phone http://forum.xda-developers.com/showpost.php?p=21953587&postcount=1
the root worked perfectly, but I did wrong is that I didn't have any of my applications that I had before root, so I thought that it is a good idea to go back into CWM and restore it from there, after I did that the phone rebooted and got stuck in the Galaxy screen, I am unable to access recovery, CWM or download mode the phone doesn't even boot it justs sits at the galaxy screen.
btw I have this kernel Bhundven's Subtly Modified Stock with CWM5 + Voodoo Lagfix (thanks to AntonX )
this is the rom that I flashed -Valhalla - BlackEdition(thanks to RaverX3X)
my computer does recognise my phone when I do the three finger salute while plugged in usb.
please I need help this is my only phone ​
If you can still get into recovery then try wiping the caches and fix permissions. That may fix it, if not maybe wipe data. Otherwise if you can still use recovery then you should try wiping everything and re-installing the rom, or restore nandroid backup and use titanium to backup your apps.
If you can't get to recovery then you should be able to one-click back to stock from download mode and start over.
TwitchyEye said:
If you can still get into recovery then try wiping the caches and fix permissions. That may fix it, if not maybe wipe data. Otherwise if you can still use recovery then you should try wiping everything and re-installing the rom, or restore nandroid backup and use titanium to backup your apps.
If you can't get to recovery then you should be able to one-click back to stock from download mode and start over.
Click to expand...
Click to collapse
I cant get to no where but the boot screen, holding the three buttons together at the same time it only makes the screen dissapear then reappear kinda like bootloop
Preluder said:
I cant get to no where but the boot screen, holding the three buttons together at the same time it only makes the screen dissapear then reappear kinda like bootloop
Click to expand...
Click to collapse
So, I have been in this very situation with that same very setup. I flashed a Nandroid backup and bam, stuck at the screen. Spent hours trying to fix it. Best part was, I was on a business trip, and all the info I needed was in my phone
So, the trick here as I recall is to get the phone in Download Mode, once there, you can then use Heimdall One-Click http://forum.xda-developers.com/showthread.php?t=1358498 (which is what I used that time) or you can flash One-Click Gremlin Remover, http://forum.xda-developers.com/showthread.php?t=1500427 which uses Odin to Flash back to Stock.
To the best of my recollection, here is how I recall getting into D/L mode after hours of trying. About 5am, got it to work. Thanks to this thread: http://forum.xda-developers.com/showthread.php?t=1112076
Steps are:
1. Have Heimdall or One-Click opened and ready
2. Remove your battery
3. I would hold the power button for like 10 secs to discharge the circuits (not sure this is needed, just like a clean slate)
4. Hold the Volume rocker down (no battery in the phone yet) *Note you DO NOT press or hold the POWER button for this procedure.
5. Plug computer connected USB into your phone (still holding down the volume rocker)
6. Insert Battery into phone (still holding down the volume rocker) Your phone should automatically turn on at this point in to Download Mode.
The order of the above is critical in that you do not install your battery until after the USB is connected, while you hold the volume rocker down. This should take you into Download mode where you can reflash.
You might also run into an issue where your computer does not recognize the drivers for your phone initially (because they are not being sent to it by the phone). If you are getting into Download Mode and you see that Heimdall or One Click is not detecting the device, reinstall the drivers from the Samsung site for the SGS4G and then try.
Hope this helps! Been in the exact same jam, you can get this fixed. Soft bricks are always better than hard bricks.
ariesgodofwar said:
So, I have been in this very situation with that same very setup. I flashed a Nandroid backup and bam, stuck at the screen. Spent hours trying to fix it. Best part was, I was on a business trip, and all the info I needed was in my phone
So, the trick here as I recall is to get the phone in Download Mode, once there, you can then use Heimdall One-Click http://forum.xda-developers.com/showthread.php?t=1358498 (which is what I used that time) or you can flash One-Click Gremlin Remover, http://forum.xda-developers.com/showthread.php?t=1500427 which uses Odin to Flash back to Stock.
To the best of my recollection, here is how I recall getting into D/L mode after hours of trying. About 5am, got it to work. Thanks to this thread: http://forum.xda-developers.com/showthread.php?t=1112076
Steps are:
1. Have Heimdall or One-Click opened and ready
2. Remove your battery
3. I would hold the power button for like 10 secs to discharge the circuits (not sure this is needed, just like a clean slate)
4. Hold the Volume rocker down (no battery in the phone yet) *Note you DO NOT press or hold the POWER button for this procedure.
5. Plug computer connected USB into your phone (still holding down the volume rocker)
6. Insert Battery into phone (still holding down the volume rocker) Your phone should automatically turn on at this point in to Download Mode.
The order of the above is critical in that you do not install your battery until after the USB is connected, while you hold the volume rocker down. This should take you into Download mode where you can reflash.
You might also run into an issue where your computer does not recognize the drivers for your phone initially (because they are not being sent to it by the phone). If you are getting into Download Mode and you see that Heimdall or One Click is not detecting the device, reinstall the drivers from the Samsung site for the SGS4G and then try.
Hope this helps! Been in the exact same jam, you can get this fixed. Soft bricks are always better than hard bricks.
Click to expand...
Click to collapse
thank you for your reply, I am sorry to hear about that this really sucks I am shipping very soon to basic training and Im just trying to get in contact with some people, but this failed me.
I will try the solution you suggested and Ill repost with results =)
btw I tried the steps with the combination of the volume button down + inserting the usb then inserting the battery
the screen turned on and it was black screen with a tiny loading circle in the middle that wasnt movie
the circle looks like a little strips.
Preluder said:
btw I tried the steps with the combination of the volume button down + inserting the usb then inserting the battery
Click to expand...
Click to collapse
It's volume up and down. Meaning hold them both in. Then insert USB.
hechoen said:
It's volume up and down. Meaning hold them both in. Then insert USB.
Click to expand...
Click to collapse
thank man im at the download mode now with the construction droid =)
hechoen said:
It's volume up and down. Meaning hold them both in. Then insert USB.
Click to expand...
Click to collapse
Thanks for clarifying, that was what I meant. I press the middle of the rocker to hold it "down" did not even think of that being mistaken as in directionally down. Sounds like the OP is up and running so all good.
---------- Post added at 02:16 AM ---------- Previous post was at 02:10 AM ----------
Preluder said:
thank man im at the download mode now with the construction droid =)
Click to expand...
Click to collapse
Good to hear. Now, get yourself updated to one of the stable ICS MTD ROMs, I never had much success with the GB ROMs being all that stable for me. Personally, I like AOKP (4.0.4) myself.
ariesgodofwar said:
Thanks for clarifying, that was what I meant. I press the middle of the rocker to hold it "down" did not even think of that being mistaken as in directionally down. Sounds like the OP is up and running so all good.
---------- Post added at 02:16 AM ---------- Previous post was at 02:10 AM ----------
Good to hear. Now, get yourself updated to one of the stable ICS MTD ROMs, I never had much success with the GB ROMs being all that stable for me. Personally, I like AOKP (4.0.4) myself.
Click to expand...
Click to collapse
thank you guys I really appreciate the help. I had the wrong combination for download mode so that made me think that my phone was completely fried, but I unbricked it using the one click unbrink program .
Preluder said:
thank you guys I really appreciate the help. I had the wrong combination for download mode so that made me think that my phone was completely fried, but I unbricked it using the one click unbrink program .
Click to expand...
Click to collapse
Out of curiosity, did you end up using Heimdall or One-Click Gremlin Remover?

Categories

Resources