Help( hard brick) - AT&T Samsung Galaxy S II Skyrocket SGH-I727

I installed CW9 without installing kernal it's stock in the logo.I put a new CM9 with a new kernal. i installed both and rebooted .It's hard brick now.No boot no download mode no recovery.

Our ROMs have kernels built in so I'm a bit confused
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Very nice! Do some research
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Dylan Bay said:
I installed CW9 without installing kernal it's stock in the logo.I put a new CM9 with a new kernal. i installed both and rebooted .It's hard brick now.No boot no download mode no recovery.
Click to expand...
Click to collapse
Wait, did you install a CM9 ROM on top of an existing, different CM9 ROM without wiping? If so, you're done. JTAG or warranty.

Are you 100% sure you can't get to download mode?
Is the phone boot looping at the Samsung logo?
If so... try to time holding the VOL + and VOL - while the phone is fully off.
You may have to turn the phone off (and back on) while holding VOL+ and VOL- to "extra confirm" the phone is seeing VOL+ and VOL- being held down on first boot.
Just remove the holding the power after you have confirmed this to prevent phone from just turning on/off constantly.
I had this happen to me with my Infuse after getting rainbow color recovery.
It might sound little tricky but (it's easy) I was able to get download mode by timing it right as I explained above.
Let us know if this helps.

We need more details I think
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

sb0 said:
Are you 100% sure you can't get to download mode?
Is the phone boot looping at the Samsung logo?
If so... try to time holding the VOL + and VOL - while the phone is fully off.
You may have to turn the phone off (and back on) while holding VOL+ and VOL- to "extra confirm" the phone is seeing VOL+ and VOL- being held down on first boot.
Just remove the holding the power after you have confirmed this to prevent phone from just turning on/off constantly.
I had this happen to me with my Infuse after getting rainbow color recovery.
It might sound little tricky but (it's easy) I was able to get download mode by timing it right as I explained above.
Let us know if this helps.
Click to expand...
Click to collapse
Bro i try to put in download mode .It won't and i try to put it in recovery it won't .I put jig to put it in download mode it won't it.I don't know what to do ...
I think JTAG can get the boot for me.

Dylan Bay said:
Bro i try to put in download mode .It won't and i try to put it in recovery it won't .I put jig to put it in download mode it won't it.I don't know what to do ...
I think JTAG can get the boot for me.
Click to expand...
Click to collapse
If you can't get anything to turn on at all, yeah, you're hard bricked. JTAG or warranty it out.
In the future, and I know you were told by prbassplayer to do this in another thread, use Google Translate and read everything before flashing. I'm absolutely certain that your phone was bricked by user error, and that's so easy to avoid. Read the stickies, read the ROM thread, follow instructions to the letter. 99.9% of the time, you will not brick if you do those three things.

That sucks bro your lucky JTAG is only 50 bucks
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Related

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

Help bricked loop at&t logo

Hey Guys, I was trying to flash into another kernel when the process on odin3 stopped at the reset part for a minute and it said removed an everything and was stuck in download mode on my captivate with no progress, so i took out the battery and put it back in then when i booted after the at&t logo it gave out a TV tracking looking thing and did a endless boot. The 3 button combo for download mode or recovery mode does not work I am not sure on what to do
ok slow down i had to read that 10 times, what is tv tracking thing...
what were you flashing? what rom were you?
you dont flash "into" kernels, download mode is 2 buttons, 3 button combo is recovery,
take out battery
put usb from phone to pc
hold both volume buttons
put battery back in
flash back to stock.
Yea i tried to get into download mode but it just goes straight into battery charging screen. i was using continuum 5.2.
Azngamerz said:
Yea i tried to get into download mode but it just goes straight into battery charging screen. i was using continuum 5.2.
Click to expand...
Click to collapse
It seems like a bad cable/usb port.
I suggest you try different one for both.
Azngamerz said:
Yea i tried to get into download mode but it just goes straight into battery charging screen. i was using continuum 5.2.
Click to expand...
Click to collapse
Download mode for GB Roms is Volume down + Power
CB650 Wolf said:
Download mode for GB Roms is Volume down + Power
Click to expand...
Click to collapse
very true!
see? it helps knowing what rom/kernel is invovled!
One you get DL mode, do not use 3 button fix. Are you using a one click with bootloaders? If not, DO NOT USE 3 BUTTON FIX. If you are reflashing eclair/froyo bootloaders, verify that you have a successful flash before using 3 button fix. Never use 3 button fix with with GB bootloaders.
i tried both plugging it into a different port and another cable no go. and the vol down and power is not working
Time to get jiggy with it.

[HELP] Bricked phone

Hey please experts help me with my galaxy 3 i just bought one i had it 1 day, battery was discharged and after i charged it i got bootloop I tried many roms and i always got : bootloop, boot screen with GT-I5800 or screen Kernel panic upload mode. I cant go into recovery mode i dont know hy it dont works (its vol+,vol -, home, power isnt it?) I cant root it i cant do anything. Anybody have some ideas what to do or its bricked? If its important i can still go into download mode and flash it using Odin thats all i can do with this phone. Pls heeeelp.
P.S.
Its not like that i dont red the forum i sited here many hours and still i didnt find solve of my problem. I guess i am too dummy ;/ I will be graceful sboody ?: (
Here comes help!
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
twinky444 said:
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
Click to expand...
Click to collapse
Thank u very much man phone was used but it had 2.1 stock firmware on it, i didnt wipe/ factory reset on phone, and i didnt't tied sthing else.
Now tell me after flashing Kyrillos' rom v9.0 Do I have flash kernel with CWM or its in Kyrillos already? How to enter CWM recovery mode ? Same as normal (VOL +, VOL-, HOME, then POWER) I did thank u cuz it sounds logical what u wrote thank u man and I am waiting for reply.
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and composite device mode ;/ I dont know what to do.
KamelusPL said:
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and capcitive mode ;/ I dont know what to do.
Click to expand...
Click to collapse
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
MicroGeek said:
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
The problem is that this recovery mode dont works .... :S Look I am serious
xxx.youtube.com/watch?v=lZ5ySu_wZKY
In url change xxx to www i cant post outside links
MicroGeek said:
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
You probably have confused Samsung galaxy 3 with Samsung galaxy S3 because this phone (Galaxy 3) Hasn't menu that you can boot to recovery/bootloader with. At least I dont know about such "menu" thing.
---------- Post added at 03:13 PM ---------- Previous post was at 03:01 PM ----------
----------------------------------------------------------------------- SOLUTION! ---------------------------------------------------------
@KamelusPL: You said that you cant boot after flashing Kyrillo's ROM v9.0. And you had Android 2.1 and you couldn't boot. That means you have been in hurry to get things really fast done and flashed FROYO ROM WITHOUT BOOTLOADERS OVER 2.1 THAT COMES WITH ITS OWN TYPE OF BOOTLOADER = bricked.
HOWEVER, there's a solution! yeah!
This is a bit risky, but if you want your phone working again, you must do that. I'm saying again, I take no responsibility over such things.
1. Put your phone into download mode. This must be working.
2. Download this file: http://hotfile.com/dl/132526357/46bd186/I5800XXJPS_OXX_Android_2.2.rar.html
3. Open odin, tick ONE PACKAGE, in the down right corner click ONE PACKAGE and select .tar file you downloaded. ITS WITH PROPER BOOTLOADERS - FROYO XXJPS. That must work.
4. Click start. NOW DO NOT TOUCH YOUR PC until its done!
5. Wait till its done and wait till your phone boots up.
6. If you will have still bootloop, then you must boot into recovery (YOU MUST WAIT... RECOVERY WONT SHOW IMMEDIATELY just like in download mode... wait man.), here navigate using the same keys I told you before, and select wipe data / factory reset, then select yes and wait till its done. Then, navigate to wipe cache partition, select yes and wait till its done. Then, select reboot system now and press HOME.
7. This should be working!
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
MicroGeek said:
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
Sorry, I mean when booting phone theres no menu like fastboot or something like that because he said he cant boot it anymore.
Sorry, Im now using cyanogenmod 7 so I didn't know that
So I'm sorry
Sent from my GT-I5800 using xda app-developers app
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
KamelusPL said:
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
Click to expand...
Click to collapse
Hold vol up+down and power and home button when the phone is off and let go of the power button once you see something on the screen.
Sent from my GT-I9003 using xda app-developers app
Wait, so when you bought your phone yesterday the battery was discharged? So you didn't check if it was working or not before you bought it? Maybe you were scammed into buying a broken phone
--------------------------------
Click thanks if I helped.
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
twinky444 said:
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
Click to expand...
Click to collapse
U have absolutly right that they to solve this is enter recovery mode but i think my problem is deeper i found something on my own. Look.
If your GSII has the folowing symptoms :
Bootloop
Stuck on GSII logo, but already removed the battery to try to fix it
Enters Download mode and Recovery mode
It means that you are soft bricked and is easy to solve.
But if your symptoms are the mentioned above, PLUS the symptoms below
Enters Download mode but does NOT enter recovery mode (usually means a NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
It looks like I must use all my brain power to solve that i guess i need to go deeper into android stuff cuz i wont give up. I even gave my phone to service but seems like that dude is lame and he is not so much expert like i need i send message to Kyrillos cuz i guess he knows all bout androids and all that stuff and thats the person who i need some1 very good must see my topic guess i will just read learn and w8 for help thank u all for advices
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
martialaw said:
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
Click to expand...
Click to collapse
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Its bad flash that has made the situation...
Flash zero fill.tar which will clean your system
Flash again a rom using 'Forced download mode' ( vol+, home, power button)
Note: you should restart your phone by keys when its still on after zero fill flash using the force download keys.
Sent from my GT-I5800 using xda premium
KamelusPL said:
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Click to expand...
Click to collapse
Sorry, I was just telling from the video. But a software like taskkiller cannot mess up the whole phone in a way that prevents access to recovery.
Try cleaning the ROM like in above post and then flash a bootloaderfree stockrom. That should leave you with a perfect situation to start all over again.
Hi,I don't know if the word "bricked" or "drowned" is the best match for my case,but anyways here is my story:I had installed on my phone the kyrilos rom,I don't remember wich version excactly it has been too long before.My phone fell into a glass of water,I pulled battery out,dried it up with hair styler,after that it had some water marks on the screen and it was working quite good,I re-flashed it abd worked better,the watwr marks on the screen dissappeared and got better...but...my girlfriend reebooted accidently in recovery and it dropped dead,froze,I pulled the battery out,reebooted,and after that I am stuck in phone's logo and it keeps loading nothing ..forever..and I can't even boot to recovery mode..any ideas?I've searched in this blog and I couldn't find anything to do..please help me..
Sent from my GT-S6500 using xda premium

S3 wont flash custom recovery

Got a buddy that has a S3 and he ODIN back to stock and hes rooted but everytime he goes to flash CWM recovery it does the process like normal but when he goes to recovery, its just the stock recovery
any help?
http://forum.xda-developers.com/showthread.php?t=2046439
Make sure you have USB debugging on and allow unknown applications before trying to flash the recovery. Just a simple check that I have forgotten in the past myself lol
Sent from my SCH-I535 using xda premium
yo
Jason Roach said:
Make sure you have USB debugging on and allow unknown applications before trying to flash the recovery. Just a simple check that I have forgotten in the past myself lol
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
what he said. Also, some of the videos were a bit confusing, but the more reading I did, I found that it may be important to wait for a "Pass" green sign to show up at the end of each ODIN step, THEN wait 10-15 minutes after you get the pass before moving on to the next step. I had messed up one device once, and did these extra steps (debug mode and waiting for pass patiently) and was successful the second time around.
olufadi1 said:
what he said. Also, some of the videos were a bit confusing, but the more reading I did, I found that it may be important to wait for a "Pass" green sign to show up at the end of each ODIN step, THEN wait 10-15 minutes after you get the pass before moving on to the next step. I had messed up one device once, and did these extra steps (debug mode and waiting for pass patiently) and was successful the second time around.
Click to expand...
Click to collapse
I always unplugged the phone and restart Odin for each flash or Odin get stuck or something
Sent from my SCH-I535 using xda premium
steve0mac,
I'm embarrassed to admit what mistake I made... but maybe it will help you and someone else. After I flashed my choice of custom recovery in ODIN and got a “Pass,” I pulled the battery/usb, etc... and then went to boot back into the custom recovery…
Here’s the silly mistake I made -- I would continue to hold in the power button along with the volume up and home button... thinking that I needed to have all of them pressed in until the custom recovery booted up. I finally figured out that you have to let go of all the buttons after you see the Samsung logo briefly appear on the screen. (Alternately, you can also just let go of the power button after the Samsung logo flashes quickly across the screen and then continue to hold down the volume up and home buttons until the custom recovery boots up--- this isn't necessary, but it doesn't seem to hurt anything).
mattnmag said:
steve0mac,
I'm embarrassed to admit what mistake I made... but maybe it will help you and someone else. After I flashed my choice of custom recovery in ODIN and got a “Pass,” I pulled the battery/usb, etc... and then went to boot back into the custom recovery…
Here’s the silly mistake I made -- I would continue to hold in the power button along with the volume up and home button... thinking that I needed to have all of them pressed in until the custom recovery booted up. I finally figured out that you have to let go of all the buttons after you see the Samsung logo briefly appear on the screen. (Alternately, you can also just let go of the power button after the Samsung logo flashes quickly across the screen and then continue to hold down the volume up and home buttons until the custom recovery boots up--- this isn't necessary, but it doesn't seem to hurt anything).
Click to expand...
Click to collapse
That is a common mistake and is posted several times in the root thread. Hold too long and it skips recovery. :laugh:

ODIN to stock without power button working? Is it possible?

Sorry for the long title but it states my predicament. Basically my power button is done and I can't boot into recovery anymore. It just is a endless cycle of reboots(vibrates everyone 15 seconds or so). I even tried to enter download mode, which it does but than restarts the bootloop issue. Anyhow, I've never used ODIN so someone please fill me in. I want to ODIN back to stock because it's my last hope and basically I can't get into recovery anymore anyway. But do I need to use my power button to ODIN? Also what if I can't get into ODIN mode because it just wants to continue to reboot. Any help? I'm at a lost here.
Oops, wrong section. Mods can you please move to Q&A...sorrrry.
tu3218 said:
Sorry for the long title but it states my predicament. Basically my power button is done and I can't boot into recovery anymore. It just is a endless cycle of reboots(vibrates everyone 15 seconds or so). I even tried to enter download mode, which it does but than restarts the bootloop issue. Anyhow, I've never used ODIN so someone please fill me in. I want to ODIN back to stock because it's my last hope and basically I can't get into recovery anymore anyway. But do I need to use my power button to ODIN? Also what if I can't get into ODIN mode because it just wants to continue to reboot. Any help? I'm at a lost here.
Oops, wrong section. Mods can you please move to Q&A...sorrrry.
Click to expand...
Click to collapse
Moved to Q and A. I suggest pulling your battery for at least thirty minutes or maybe an hour. Then put the battery back in(do not power on) and plug the phone into your charger and allow it to charge overnight. From what you have said the power button does indeed work but you have done something to your phone causing a boot loop. In the morning search XDA for Odin procedures (there are a plethora of them on XDA) and attempt your Odin to stock. If the phone continues to boot loop I hope you have insurance... I did this to my LG Optimus once... And couldn't save it...
VeNuM said:
Moved to Q and A. I suggest pulling your battery for at least thirty minutes or maybe an hour. Then put the battery back in(do not power on) and plug the phone into your charger and allow it to charge overnight. From what you have said the power button does indeed work but you have done something to your phone causing a boot loop. In the morning search XDA for Odin procedures (there are a plethora of them on XDA) and attempt your Odin to stock. If the phone continues to boot loop I hope you have insurance... I did this to my LG Optimus once... And couldn't save it...
Click to expand...
Click to collapse
It does "work" but not correctly. Apparency its a known issue and called SDS. basically the way it acts is that when I press the button, the phone
Is acting as if I pressed it twice. So I press it to turn screen off, screen comes right back on. Long press power button for reboot menu, flashes, dissapears and than comes right back. This I believe is why I can't boot into recovery or download mode. Not that the phones bricked, but the phone is having trouble recognizing power button hits.
So my last try was to Odin back to stock just to see if that helps. But when I hold the buttons down to get into download mode or select it in reboot menu, it boots into it real quick(I see download mode appear on screen) but than immediately starts looping. So when I use Odin, will it automatically boot into download mode for me? What about mobile Odin?
Sent from my Galaxy Nexus using xda app-developers app
I had the same problem With my s3... It was out of warranty so I sent it to mobile tech videos to have the power switch repaired. It's been great ever since. I realize that doesn't really Answer your question about Odin, just figured I'd chime in with what I had to do. I was afraid to attempt to Odin or flash anything before the repair bc in my mind the phone believed the power button was being pressed repeatedly and that would make it interrupt the flash.
Also if you're under warranty, Samsung will most likely fix it despite being rooted. Mobile Tech Videos sounds like a great option too if you're out of warranty, glad to see there's an alternative way to get it fixed.
Sent from my SCH-I535 using Tapatalk 2
I don't have the phone in question but for my Samsung Vibrant (Galaxy S, T-mo variant) if you press and hold the Volume Up button while plugging in the charger or say your computer's USB port the phone will boot into download mode. Not sure if it will work for the S3 though. Hopefully it does! :fingers-crossed:
Also, for my work around, I've mapped the Volume up button within ROMs to 'POWER WAKE' to replace the power button. It's not needed but its an easy way to reboot to recovery if its implemented in the Roms power menu. Occasionally the phone will crash or the battery may die. If I'm at home, that's an easy fix, just boot up download mode and flash a kernel/modem/recovery via odin and make sure auto reboot is selected. The phone should boot, granted there are no errors. The only problem I have is when it crashes or battery dies and I'm not at home I can't turn on the phone. If anyone knows a way around powering on or booting into recovery without the use of the power button or odin/download mode I will be eternally grateful. I'm try to get my Vibrant in working order for my father whose never had a Smart phone. I myself have upgraded to the s4 and am glad I stuck with what I knew instead of getting the HTC One. =]
http://forum.xda-developers.com/showthread.php?t=1931310
Read this thread. Power button issues on S2 might help and save you time and money. Or if you want to get into download mode use adb.. "adb reboot download " or can be done in terminal.
Sent from my SCH-I535

Categories

Resources