Related
This topic has clues for replacing the screen. I have not concluded an manual for chancing it yet but reading this whole topic gives you the big picture how it is done. Questions are always welcome and I try to answer them with my knowledge. This 1st post gives you 2 links to follow for pics about changing screen and my own starting point for chancing my own screen.
Has anyone bought and installed a digitizer+screen set which is on sale at ebay? I could not post direct link to ebay because I'm a newbie on these forums. You can find the product searching ebay with these keywords "I9000 digitizer". My galaxy's screen cracked and I need an replacement. Both screen and glass broke. I think that this set includes them both. There is also told in the questions that the set infact includes amoled display and not LCD as the title says.
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Third question is that doesn't samsung vibrant and galaxy s share the same chassis but different screen with more capacitive buttons. Could it be possible to install vibrant's screen to galaxy s?
PS. The way my galaxy brokedown is very funny. I lay down my phone on the kitchen table and the screen cracked. I was like OMFG when I heard the cracking noise. Phone was like 13 days old. Samsung does not repair it with warranty because they think that it wasn't an manufacturing defect. They said that I have dropped my phone and that's the way it broke. That could not be the case because I handled it like a baby. I would have to pay 255€ for new screen and digitizer. Hell no!! I'm a student so that sum does not fit with my wallet.
New screen installed, see posts http://forum.xda-developers.com/showpost.php?p=7683527&postcount=37 and http://forum.xda-developers.com/showpost.php?p=7710572&postcount=40
Edit: Ebay's prices have rised noticeable in the last couple of months. At the moment the price for these screens is around 100$. I found this site which sells them for 60£. http://www.shineyourmobile.co.uk/ProductDetails.aspx?pid=8128
pekkala89 said:
Second question is that does someone have an service manual somewhere. Would be nice to know how to break apart my phone when replacing screen.
Click to expand...
Click to collapse
There are 2 videos on the net, both on youtube I think. Just search "i9000 Disassembly" and you'll find one of them.
The Galaxy S has a serious design flaw as the glass goes around the home button (and the call ear/speaker) so it's very vulnerable there to shattering. I had my phone in the pocket and suddenly when I take it out I see it cracked right next to the home button. What had I done during the time it got cracked? The only possible explanation was carrying a _small_ speaker that then probably hit it. I was so surprised when I saw it cracked because even a speaker hit, when I lifted it up, is hard to consider cracking the screen.
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Schmich said:
So international model Galaxy S owners, be careful at the bottom and top of the screen. They're the weak points of the glass. For me only the glass cracked and not the screen so it will be interesting to see how much it will cost to fix.
Click to expand...
Click to collapse
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
the same...
i had a similar unfortunate event ... my screen cracked when i hit the phone to the metallic frame of a chair (it slipped out of my hand )...
it cracked exactly like you people said... near the home button.
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
it is quite tricky to dissassemble the display part but hope to succed...
keep you posted with the outcome
respect
pekkala89 said:
I think that you can't change only the glass. Amoled screen is so thin and I believe it's glued pretty thight to the glass. Separating them may be impossible without tearing the amoled.
Click to expand...
Click to collapse
Yeah that's my fear but I presume they just heat up the glue. That's how some industries do for other products. I think dental bracers (& its glue) have a different technique as well. So, will be interesting to see.
gallaxya said:
i ordered the display + digitizer and i anxiously await its arrival to see if i can replace the damaged one.
Click to expand...
Click to collapse
Where did you order it from?
If you were asked to pay more than $250 for screen replacement, then why don't you send it to Samsung in Korea? They will replace your SAMOLED for mere USD $100ish and ship it back to you for free (or may be not). This way you get a genium quality from original manufacturer and absolutely no hassles!
I dropped mine from around 4ft onto a concrete floor and its fine. Maybe I just got lucky.
Digitizer+Samoled set ordered from ebay. I should get it in two weeks. If possible I try to take pictures of the changing process and make an manual. I hope it's not glued tight to the chassis.
please do, i have some f***ing little scratches all over the screen, thought it was supposed to be scratch resistant.
Worst part is that it's in it's protective pouch all the time (maybe that's the probleme, dirt/dust might get trapped and rub against the screen).
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
yrizan said:
Got my digitizer and amoled screen t
oday. I will report back if its a hard job or not to replace it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
pekkala89 said:
I tried to remove broken screen for 2 hours and no luck. Removing the motherboard is problematic because power button is glued to the chassis so I could only turn the motherboard aside and not remove it completely. I tried also to remove metal edge but I could only separate it from the left and right edge, not from top and bottom. I hope you have better luck and report how you managed to overcome my problems.
Click to expand...
Click to collapse
Sorry to say got in to the same problems
Looks like the phone is build around the screen. Be careful with the metal ring, on top and bottom its between the screen and chassis, so if you brute force to much the screen cracks even more. The screen is glued to the chassis all around with superglue. I am not sure if its even possible to repalce the screen. It let me thinking that samsung wont repair broken galaxys , just replace them.
Ill keep working on the phone and keep trying, but compared to changing the screen on iphone is this like changing the screen on a iphone as a blind man without arms.
People thinking of buying this screen kit on eBay, don't do it. Just contact samsung for a repair.
Ill keep you posted.
I got the screen off.
No need to loosen the metaling ring around. The screen in dropped in the chassis from the front.
On the mainboard, just pop off the screen cable, long and flat next to the SD card slot.
The next step is very strange, just use brute force and crack the screen off the chassis, start from the top
When you get around the home button, be careful. Samsung has clued 2 sensors to the screen and chassis for back and option button. Best thing to do here is bend the screen back a little and cut loos the sensors from the digitizer with a sharp knife/scalpel. Samsung has used insane amount of clue on this phone.
Both the digitizer and amoled screen was clued to the chassis.
The next step is to clean off all the clue, buy loads of glue. Fill the chassis with glue and press the new screen on.
Wish me luck.
Ill keep you posted.
Making me a bit scared reading this thread, I`ve just bought phone Insurance just in case.Good luck fitting your replacement screens, sounds a bit daunting.
YES!!!
New screen in place and everything is working perfectly. Took about 3 hours first time (give or take). Its possible to do it a lot faster. The biggeste problem is the glue. Melting at about 120 celsius, but i was scared to heat the glas as i didnt know how much heat the mainbord could stand. All in all a pain in the a**, but doable.
I can also confirm this screen from ebay to be an orginal samsung amoled screen.
Best of luck too others trying a screen replace.
Sent from my GT-I9000 using XDA App
amoled or samoled though?
My mistake. Its a samoled screen
Sent from my GT-I9000 using XDA App
Awesome!!! thanks for the review
did you manage to snap a few pictures meanwhile you were working in your phone?
Im sorry, no pictures
The charger is missing to my canon camera, new one incomming from ebay. I'll post pictures next time ill change the screen ;-)
Sent from my GT-I9000 using XDA App
HI there, is anyone aware of screen protectors that cover those lines around screen where the dust gets in? PLEASE? Thank you
xperiaforme said:
HI there, is anyone aware of screen protectors that cover those lines around screen where the dust gets in? PLEASE? Thank you
Click to expand...
Click to collapse
the official htc ones seem to, or at least, they do on my device
dannclose said:
the official htc ones seem to, or at least, they do on my device
Click to expand...
Click to collapse
Where do you get yours because I justgot mine from my service provider store, original ones, and they don't cover it....
ok so I dropped my one s and my screen quit working (its all black). It still registers when I touch it though (I can still unlock it and everything) does this mean I just need to replace the screen? Or could there be more to it than that? If you need more information just ask. Thanks in advance for your help!!!
EDIT: There's a crack in the screen from the drop. But it's so thin it's almost impossible to see.
daddymac2011 said:
ok so I dropped my one s and my screen quit working (its all black). It still registers when I touch it though (I can still unlock it and everything) does this mean I just need to replace the screen? Or could there be more to it than that? If you need more information just ask. Thanks in advance for your help!!!
EDIT: There's a crack in the screen from the drop. But it's so thin it's almost impossible to see.
Click to expand...
Click to collapse
I had the same issue. the easiest option is to buy the LCD/digitizer with the Glass, but the cost is around $120.
the cheaper option is for you to separate the glass for the LCD/digitizer yourself and just order the glass yourself $5
that's what I went and did and it didn't go so well for me, broke the LCD while taking the shattered glass off.
bayardo2001 said:
I had the same issue. the easiest option is to buy the LCD/digitizer with the Glass, but the cost is around $120.
the cheaper option is for you to separate the glass for the LCD/digitizer yourself and just order the glass yourself $5
that's what I went and did and it didn't go so well for me, broke the LCD while taking the shattered glass off.
Click to expand...
Click to collapse
I have purchased this, as the LCD and touch are working fine. In your opinion, would a mobile technician be able to handle the procedure to separate the glass lens and replace it ?
I'm sure a technician can, but taking off the glued glass is a lengthy process.. took me 2 hours.
Has anyone already buy a screen replacement foe your moto x play? I broke my screen a few days ago.. i've ordered the replacement on ebay and the seller says the design it's like the original.
Yeah I did and replaced it. What I noticed is that the glue on the very thin black frame that attaches to the screen does not go back on after you have taken it off with a heat gun. Also, be very careful while performing the step of separating the frame from the screen the frame breaks all too easy. Most repair guides don't show you that step as they show the part that has the frame attached to it. Another tip is make sure that you take your time removing the components while using the heat gun... Patience really does pay off. Good luck.
joeanca said:
Yeah I did and replaced it. What I noticed is that the glue on the very thin black frame that attaches to the screen does not go back on after you have taken it off with a heat gun. Also, be very careful while performing the step of separating the frame from the screen the frame breaks all too easy. Most repair guides don't show you that step as they show the part that has the frame attached to it. Another tip is make sure that you take your time removing the components while using the heat gun... Patience really does pay off. Good luck.
Click to expand...
Click to collapse
Oohh i think you only replaced the screen.
I ordered the screen + lcd + frame do i still need a heat gun? And does the screen looks and feels the same? Thanks for the answer!
Yup thats what I did. It does feel the same and looks the same.
Sent from my XT1562 using Tapatalk
Neperpika said:
Oohh i think you only replaced the screen.
I ordered the screen + lcd + frame do i still need a heat gun? And does the screen looks and feels the same? Thanks for the answer!
Click to expand...
Click to collapse
I also ordered the full kit including the frame.
The display is on par with the original one. Only problem with mine is that the screen glass isn't glued perfectly to the frame/display on both sides on top. You can see the lcd backlight shining through a bit if you view the device from the side.
Fixed it with a back cover ^^
The replacement process isn't that easy, you should have time and good light. A heat gun (or hair dryer) will help as you need to get the battery and the logic board unglued.
Another essential tool will be a high quality Torx T3 screwdriver. The little screws are quite sensible and the cheap china tools will do nothing but destroy them.
With a steady hand and a bit of luck it can be done. :good:
Edit: This video was quite helpful. It's in german but most of the video content speaks for itself.
can anyone suggest me which adhesive should i use for screen replacement[ouer glass only]. beter if anyone can provide me indian site links but any name suggestion will also work.
my front glass has scattered,display and touch are fine.I have ordered front glass only in amazon.
https://www.amazon.in/Front-Replace...92209&sr=8-5&keywords=moto+x+play+front+glass
can we replace it without damaging display or touch. Thanx in advance
ViShNu ViZz said:
my front glass has scattered,display and touch are fine.I have ordered front glass only in amazon.
https://www.amazon.in/Front-Replace...92209&sr=8-5&keywords=moto+x+play+front+glass
can we replace it without damaging display or touch. Thanx in advance
Click to expand...
Click to collapse
Bro let me tell u one thing, before buying this glass contact a repair shop and make sure that he will be able to replace it,
Replacing the glass is very tough job to do, it requires a lot of experience, you can even check videos on YouTube about changing the glass.
If the mechanic agrees and is sure he will be able to change glass then only try to buy it.
And don't try to change it by yourself at home cuzz it needs special equipment to replace it.
Good luck
Hit thanks if I helped you
[email protected] said:
Bro let me tell u one thing, before buying this glass contact a repair shop and make sure that he will be able to replace it,
Replacing the glass is very tough job to do, it requires a lot of experience, you can even check videos on YouTube about changing the glass.
If the mechanic agrees and is sure he will be able to change glass then only try to buy it.
And don't try to change it by yourself at home cuzz it needs special equipment to replace it.
Good luck
Hit thanks if I helped you
Click to expand...
Click to collapse
i watched couple of youtube videos but its about completely changing display(touch,display,front glass)
ViShNu ViZz said:
i watched couple of youtube videos but its about completely changing display(touch,display,front glass)
Click to expand...
Click to collapse
I think this is what u r looking for
https://youtu.be/zEI6tYIVtl4
ViShNu ViZz said:
i watched couple of youtube videos but its about completely changing display(touch,display,front glass)
Click to expand...
Click to collapse
and did u made it?
the linked vid above is for a moto x, no play, but guess its the same. anyone knows what kind of glue he is putting between the screen and digitizer?
yes bro the xplay will be same like that and don't do that yourself because the process should be done by a professional mechanic... i asked some mobile repairing shop and he said it will charge 1500 to change the glass so i decided to change it what about you?
I've replaced mine successfully.
Although it's "OEM", I have noticed quality issues.
The screen is very sensitive to pressure (Distorts when touching screen) and white spots towards the top of the display are noticeable under white pixels.
I believe something is pressing into thee back of my screen but I ain't touching it until I recieve my replacement earpiece.
Pretty modular phone, 3.5 jack, battery, NFC, earpiece and buttons are easily replaceable.
Just be very cautious when putting your phone back together, don't do what I did and just squeeze it all back together in a rush.
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
SolarisSixth said:
No, it is in fact very unlikely they'll be able to separate them.
It will be more expensive but you'll have to get an lcd display and glass assembly all together.
Click to expand...
Click to collapse
According to this: Ali Express
LCD Only: If the image under the glass is broken and the touch panel is NOT then you only need an LCD.
Touch Panel aka Digitizer: If the top touch panel or aka glass top is cracked or broken but the image under it is fine then you only need the Touch Panel.
Complete Screen with Touch Panel and LCD: If the top touch panel is broken and the LCD image is either black liquid or cracked you need a complete screen.
Click to expand...
Click to collapse
According to that; If the glass is cracked, I only need the Digitizer replaced.
I am happy to get the whole thing, its just I have already ordered a Digitizer and thought this was all I needed. I could be wrong.
Any recommendation on the type of screen I should purchase for best results?
Ali Express Search
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi there
I got the same Problem. Screen and Touch and everything is OK. Did you manage to replace the broken glas? Was the Ebay thing okei or did u buy something different?
Cheers
andyphone said:
Over the weekend I dropped my mix 2s and have cracked the bottom of my screen glass.
I was wondering if anyone else has had this problem and fixed this. I have purchased a new glass on eBay: https://www.ebay.com.au/itm/263620735738?ViewItem=&item=263620735738
I am planning to take it to a professional repair shop.
Is it likely that they will be able to separate the glass from the LCD and glue on this replacement? Is there any risk of this going wrong and my screen from acting weird afterwards?
Click to expand...
Click to collapse
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Any update on this? I'm in the same situation, front glass is cracked but phone otherwise fine. Replacement is only $10, but can just the glass even be replaced?
I just bought the whole LCD/Digitizer for $60, not even going to attempt to separate just the glass
emanuel.caesar said:
Hi i managed to change my whole lce by myself. Its quite hard only for heating the glue and opening everything. There is no guide on internet so i just follow mi mix 2 guide. I bought from aliexpress, 60 euro, claimed to be original, checked its JDI from cti app, and very good quality, color also very good, nothing weird, glass also oleophobic.
Click to expand...
Click to collapse
Hey emanuel.caesar,
thanks for your helpful post. A few further questions from my side:
which lcd did you choose exactly? Are you still satisfied with the quality? And the last question Does the video guide for the Mi Mix 2 work for the Mi Mix 2s as well or are many things different? Thank you in advance for a short reply.
Hello,
Is not a good idea to try to just replace de LCD screen. I did this operation many times in the past and I can confirm that's a long operation (~1h30), there's a lot of risks that you break the digitizer and for a good result, you need LCD glue and a UV machine.
So, I think it's a better idea to replace all the screen: LCD + Digitizer.
Any suggested YouTube videos to replace the glass + LCD + digitizer?
Looking at a used phone with broken glass. It's like $10 for glass or $32 for the whole set and if I recall last time I had glass swapped it was like $60 labor and no guarantee the LCD wouldn't break. I'm pretty technical have repaired plenty of phones Android and iPhone. Anyone have a good link for removing the LCD / digitizer / glass unit? Is this like the Samsung where you need to use a blow dryer to heat the adhesive to get it off? Or like an iPhone where you just take screws out and pry the panel out? Much appreciated