hey guys, i tried searching the forums but ended up having to post this question. is "GT-P3113_XAR_1_20120412104938_ldcgx9tzmx.zip" (found here: http://forum.xda-developers.com/showthread.php?t=1645295) the same as "IML74K-P3113UEALCB-stock.zip" (dead link found here: http://goo.im/devs/jcase/IML74K-P3113UEALCB-stock.zip)?
just curious if they are the same because i will be reverting my galaxy tab 2 7.0 back to stock rom to send it in for repairs.
just thought i'd ask here since xda developers are the best in the biz right now.
thanks in advance.
The thing is you need to be sure it matchs your region you bought it from.
Check samsung-updates.com, they have the latest in different areas directly from the samsung kies servers.
Hope this helps
Sent from my GT-P3100 with CM9
just bought the galaxy tab 2 7.0 from Costco. I think I need the one from goo apps but link has been disabled. Wish "jcase" could reupload it.
**UPDATE**: the model # on my original box says "GT-P3113TSSXAR". SW-VER is "UEALD3". so yes, i do need the version that jcase had uploaded. damn.
Related
Hey Guys,
I've just purchased a Galaxy tab 2 P3110 (7.0) and i would like to root the device, and put Cyanogenmod 10 or 10.1 on it, as this is christmas present for a close relative and want the added features Cyanogen offers. I already have this installed on a Samsung S3.
I've seen quite a few different guides on the forums and other websites, all with differing ways to root the device and install custom ROM, can someone please provide a recommended guide to follow.
Check the 7 tab development thread.
Basically you need to download a program named Odin and use it to flash the proper cwm recovery to your tab. Then you boot that recovery to install the rom. You don't need to root, rooting is only if the rom you use is not rooted, like stock rom etc. You also don't need to unlock the bootloader or anything like that.
Sent from my GT-P5110 using Tapatalk 2
Querying instructions for Rooting Samsung Tab 2 P3110
Nutsonfire said:
Check the 7 tab development thread.
Basically you need to download a program named Odin and use it to flash the proper cwm recovery to your tab. Then you boot that recovery to install the rom. You don't need to root, rooting is only if the rom you use is not rooted, like stock rom etc. You also don't need to unlock the bootloader or anything like that.
Sent from my GT-P5110 using Tapatalk 2
Click to expand...
Click to collapse
Dear Nutsonfire,
Thanks for your response i'm still conflicted about which instructions to use, some are saying make sure you download samsung kies, and the drivers etc..... before running ODIN, and some don't even mention it.
Heres what i've looked at so far... can you clarify as i definetly dont want to brick this
http://www.ibtimes.co.uk/articles/406710/20121120/samsung-galaxy-tab-p3100-install-cwm-recovery.htm
or
http://forum.xda-developers.com/showthread.php?t=2018386
theplague6t7 said:
Hey Guys,
I've just purchased a Galaxy tab 2 P3110 (7.0) and i would like to root the device, and put Cyanogenmod 10 or 10.1 on it, as this is christmas present for a close relative and want the added features Cyanogen offers. I already have this installed on a Samsung S3.
I've seen quite a few different guides on the forums and other websites, all with differing ways to root the device and install custom ROM, can someone please provide a recommended guide to follow.
Click to expand...
Click to collapse
This link may help you
It contain rooting method as well as method to flash cyangenmod
http://forum.xda-developers.com/showthread.php?t=1722745
theplague6t7 said:
Dear Nutsonfire,
Thanks for your response i'm still conflicted about which instructions to use, some are saying make sure you download samsung kies, and the drivers etc..... before running ODIN, and some don't even mention it.
Heres what i've looked at so far... can you clarify as i definetly dont want to brick this
http://www.ibtimes.co.uk/articles/406710/20121120/samsung-galaxy-tab-p3100-install-cwm-recovery.htm
or
http://forum.xda-developers.com/showthread.php?t=2018386
Click to expand...
Click to collapse
Kies is just so that you have the correct usb drivers so that your device is recognized by windows. You can also just install the drivers stand alone or Kies.
get odin and the file from the chainfire topic on the dev section
flash it and voila
quite simple, purchased mine last week and already flashed a lot of things
Amongst a slur of guides to rooting your Galaxy Tab 2 7" 3110, this video helped my a lot.
https://www.youtube.com/watch?v=R0v62o9W7oY
He goes in-depth on a lot of things that confused me, so hopefully it will help you!
(I was having trouble with the youtube plugin)
RorixRebel said:
get odin and the file from the chainfire topic on the dev section
flash it and voila
quite simple, purchased mine last week and already flashed a lot of things
Click to expand...
Click to collapse
Hey Guys,
Thanks for all your great help so far.
Not sure if this is applicable but figured i would check before i do it. I've noticed on my device its listed as a P3110, but on a few of the instructions and the CF-AUTO root its listed as model number GT-P3110, from what i have its a plain tab 2, without phone.
theplague6t7 said:
Hey Guys,
Thanks for all your great help so far.
Not sure if this is applicable but figured i would check before i do it. I've noticed on my device its listed as a P3110, but on a few of the instructions and the CF-AUTO root its listed as model number GT-P3110, from what i have its a plain tab 2, without phone.
Click to expand...
Click to collapse
yeah we just drop the GT- from the front of the model name as a sorta shorthand the 3 Models for the 7" (not counting the verizon that uses a different model number string) are the GT-P3100, GT-P3110 and GT-P3113 and the 10.1" versions replace the 3 at the beginning with a 5 so they are GT-P5100, GT-P5110 and GT-P5113 they are the same thing whether they have the GT in front or not, its just quicker to not type it out everytime.
BRILLIANT
daniel644 said:
yeah we just drop the GT- from the front of the model name as a sorta shorthand the 3 Models for the 7" (not counting the verizon that uses a different model number string) are the GT-P3100, GT-P3110 and GT-P3113 and the 10.1" versions replace the 3 at the beginning with a 5 so they are GT-P5100, GT-P5110 and GT-P5113 they are the same thing whether they have the GT in front or not, its just quicker to not type it out everytime.
Click to expand...
Click to collapse
Thank you guys for all your brilliant help the last few days, hopefully i can return the favor when it comes time to other people asking the some questions
I got 10.1 up and going nicely took less than 10 minutes to get it all happening
I have a Samsung Galaxy Tab 2 10 .1 inch AT&T 4G SGH 1497 I am unable to use several features because of the 4.1 .2 apk update but more importantly I was curious if anyone was successful in installing a 4.2 .2 to this version of the tab 2 and if anyone was able to get everything working solid? I am very interested in getting this rooted but I don't want to screw up the 4G capabilities and take it off the AT&T network if anyone has any tips links or maybe I missed it in the forums on how or if its possible I would be greatly appreciative. also if you know anything about the WiFi Bluetooth problem I have another post that is directly related to this? thanks for Reading
I had no issues rooting and installing twrp/cwm, but I hard bricked one trying to install AOKP. CyanogenMod gave me the dreaded error 7. From what I understand, this hardware is nothing like the other TAB 2's. It's not looking too good lately. Imight get impatient before long and do my own de-odex and mod the systemui as well as other things. MY tab 2 is just not my main device so I haven't put allot of effort into it as yet. Someone is going to need to soon or we'll all just upgrade to something else that is better supported by dev's. I wish us luck on this device. I have googled to high hell and haven't dug up anything. Couldnt even find an odin file for 4.1.2, so I captured that one while i could and put it up for d/l. Maybe that will help someone dev on 4.1.2 at least.
Hello,
I'm glad I found this post. Can either of you provide a link to the file needed to root the AT&T 4G SGH 1497, I can't seem to find it anywhere. Thanks for any help.
G
note2rootbeer said:
Hello,
I'm glad I found this post. Can either of you provide a link to the file needed to root the AT&T 4G SGH 1497, I can't seem to find it anywhere. Thanks for any help.
G
Click to expand...
Click to collapse
I too am in this dilemma. I just purchased a Tab 2 and want to root to remove the AT&T bloatware. SGH-I497. I found this post:
http://forum.xda-developers.com/showthread.php?t=2101044
But since I don't know when 4.1.2 was rolled out for the Tab 2, I don't know if this root method is valid. Help please.
SGH-I497, 16 GB AT&T running 4.1.2 build #J2054K.I497UCBMF2
One small mistake on my part... I have the wifi version. Changed my profile pic to Underdog (I'm such an idiot).
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Hello. I'm new here. I just updated my Samsung Note 2 SGH-I317M with Bell Canada. I now have Android 4.4.2
I don't need instructions on how to root/unlock. I've done it in the past using a program called Odin.
All i need to know is where do i download the correct rom for my phone?
I've looked on this website but i can't seem to find the rom section. Is there a different website that everyone gets their roms?
Please help me.
mdude22 said:
Hello. I'm new here. I just updated my Samsung Note 2 SGH-I317M with Bell Canada. I now have Android 4.4.2
I don't need instructions on how to root/unlock. I've done it in the past using a program called Odin.
All i need to know is where do i download the correct rom for my phone?
I've looked on this website but i can't seem to find the rom section. Is there a different website that everyone gets their roms?
Please help me.
Click to expand...
Click to collapse
Samsung-updates, Sammobile...
Most good brand phone roms are here on xda-developers. but if you have chinese phone look them on needrom.com. also there are plenty of roms on 4pda.ru forum (if you know russian).
I don't understand russian or chinese and sam's mobile only has stock roms.
I ended up finding one made by someone called chainfire
Good thing we have smart people who do this, I really hate how cellphone companies install so many junk apps.
It works good. Anyways, Thanks for the replies.
It's 2016, and I need to know the truth about rooting the I925. I reset it to factory settings and here is what I have:
Model SCH-I925
Android Version = 4.1.2
Kernel Version 3.0.31-1481643
Build # JZ05454K.I925VRAMK1
Hardware Version I925.03
Is is possible to put Cyanogen on this?
I have tried several ways and the only successful way I have rooted it was King Root. But I was never able to get a recovery on there. I used Heimdall, according to the Cyanogen Website, with no success. I really thought CASUAL was the answer, but now I see that it doesn't work with the updated version. I need the pro on here to help me! I really want cyanogen on it! I am a newbie and using Windows on this..
Try the forum for your model .
I too fall into the same category and have not found a definite answer, has the MK1 stumped all who come against it? Or is root and unlocked b/l a trade secret? I have rooted many devices in my past from G1 to EVOs to newer devices and nothing has been more or less unknown around here like this device is....what gives??
What locked bootloader
Sent from my SM-N920C using XDA-Developers mobile app
It's hard to find a good how-to with this one it seems. There are many tutorials but usually for the other variants and not the Verizon one. The ones that seem to be for the right device use apps to install a recovery but the apps don't seem to support this model either.
I guess there is no luck for this tablet at all... I got it for cheap at this point (4 years after its release)! And there doesnt seem to be a way to even downgrade
verizon galaxy note 10.1 sch-i925 ver 4.1.2
unable to get casual from the link posted
Take Note Verizon CASUAL(R478b) just a blank page. is it possible For Adam Outer to post another link please.
it is for galaxy note 10,1 verizon sch-i925 ver 4.1.2
From memory Adam is no longer an active forum member .
verizon galaxy note 10.1 sch-i925 tab ver 4.1.2
JJEgan said:
From memory Adam is no longer an active forum member .
Click to expand...
Click to collapse
So this means there is no fix for Galaxy note 10.1 SCH-I925. Would you happen to know if Casual is available for this model somewhere in this forum. Thanks for your response. mariomr
No sorry no idea .
the only thing that is achieved is to root, unfortunately there is no way to unlock the bootloader to install TWRP
I also found the 4 stock files to recover by odin, but I did not verify it
sorry for my english
https://forum.xda-developers.com/galaxy-note-10-1/help/safe-method-rooting-sch-i925-t2950023
Been a while like years since I rooted mine, but it was easy peasy, with Framaroot.
https://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
People I need an expert opinion here. Let me first say if I'm posting in the wrong place apologies. I have an old international Samsung Galaxy note 10.1 and stamped on the rear case it quite clearly states "Model GT-N8010". I'm trying to install a custom ROM but each one I try for that model states the model is wrong. I have successfully installed one that said it was for the N8013 and another Cyanogen one supposed to be for the N8000. I'd REALLY appreciate thoughts on what the hell is going here. Thank you for reading.
John..
Sent from my HTC One_M8 using Tapatalk
lisaamybeth said:
People I need an expert opinion here. Let me first say if I'm posting in the wrong place apologies. I have an old international Samsung Galaxy note 10.1 and stamped on the rear case it quite clearly states "Model GT-N8010". I'm trying to install a custom ROM but each one I try for that model states the model is wrong. I have successfully installed one that said it was for the N8013 and another Cyanogen one supposed to be for the N8000. I'd REALLY appreciate thoughts on what the hell is going here. Thank you for reading.
John..
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Hi John,
The N8013 firmware is the same than the N8010. It is just the US version whereas the other one is the international one, that's the only difference.
You can even flash the N8000 firmware, it wil work properly but as it is a 3G version you don't really need it on your N8010
Sent from my XT1092 using XDA-Developers mobile app
Boot to download/ Odin mode and it will show the real model .
Rooting and custom flashing help needed
Hey, I needed some help with the same, I have a Note 10.1 by Samsung with the model number N8013ZW nad I'm trying to breathe some fresh air into it by finally rooting it but as it is my first time doing it I'm completely clueless. Can someone please direct me to an easy to follow source for amateurs?
Why do you want to root ??
Do you have a problem with model number .