Database Info

[I9003] DEODEXING Method If Every Other Method Fails (Without Busybox)

This Method Is The method Used By Me For deodexing Gingerbread XXKPE .I used This Method Because I was Not able to install BusyBox (ie The cp command didn't Work.so I was not able to copy the deodexed files to phone .So That the phone did not boot,stuck at the booting time).
Use This Method If Every Method For Deodexing Fails.
Steps
1.) flash to new XXKPE gingerbread Rom
2.) Root Your Phone
3.) download xUltimate-v2.2.8 xUltimate-v2.2.8
Note: You can use the already deodexed files by downloading this link Download Deodexed System Files [COMPLETE] then Goto step 11
4.) Unzip xUltimate v2.2, and launch "Main.exe"
5.) If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
6.) Run option 1. After option 1 is done, run option 2.
7.) Now these well take a while. Run option 3.
8.) IMPORTANT: After you have run option 3
9.) Now run option 4, and wait.
10.) Exit xUltimate, and put the phone in USB debugging Mode
11.) Download QtADB_0.8.0_windows_with_libs.zip
QtADB_0.8.0_windows_with_libs.zip
12.) Open It QtADB (left side - Browse to the xultimate folder, Right Side System folder)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
13.) copy all the in the done_app folder to the app folder in the phone side
14.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
15.) copy all the files in done_frame to framework folder in the phone side
16.) type odex in the filter textbox (phone side) and you will see all the odex files.select all and delete them
17.) Reboot
Note 1: Rebooting Will take some time .its due to the new caching of files
Note 2: If Copying Get Stuck At somewere ,NO PROBLEM just Recopy The files Until all files are copied

Forget deodoxed process, and thank you brother for This explorer for windows, and I searched a lot for something like this but didn't find any application.
Thanks....
Recycled comment.
Sent from my GT-I9003 using Tapatalk

Changed The Thread
Comments Starts From HERE
Recycling Threads

with this no need of busybox right ... good one thanks

kchdeepak said:
with this no need of busybox right ... good one thanks
Click to expand...
Click to collapse
Busy box is needed. But the busybox needed will be 1.16.2 (which will be installed automatically when you Root with SuperOneClick).this busybox version do not contain cp commands.But still you can Deodex

Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/

bajju123 said:
Unrecognized option: -splash:./jar/1.png
i get this error after selecting the 3rd option :-/
Click to expand...
Click to collapse
If you can't deodex the files the you can use the already deodexed files uploaded by Misledz
Download Deodexed System Files [COMPLETE]

checking....

@vivek... *waiting for phone___*
what to do?

xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?

Aaditya2 said:
@vivek... *waiting for phone___*
what to do?
Click to expand...
Click to collapse
Flashed & Rooted ???
remove usb cable & connect again in debugging mode ??
Or it may be error in driver files
install kies or update it

Aaditya2 said:
xultimate procedure donr... bt when m going to open QtADB .. it ask for path.. when i place the xultimatum folder path... it repleis "There is no adb binaries here"...
what to do?
Click to expand...
Click to collapse
I think you havent even set up the ADB which is used for develpment & othe management of Android phones
I will provide the link
install the adb and the use Qtadb.exe
How To Set Up ADB/USB Drivers for Android Devices
So most people won’t have to use ADB (Android Debug Bridge) ever, but if you want to learn how or want to get a little more technical with your Android phone, here’s how to get it set up.
I. Setting Up The SDK
1. Download the Latest Android SDK from Google
Android SDK
2. Extract the Android SDK .Zip file to C:\AndroidSDK (this should name the new folder created AndroidSDK in the C directory.
3. On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
4. Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.
!UPDATE 12.01.09 – If using Windows 7 skip steps 4 and 5 and use this procedure instead.
5. After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.
6. Type the following into the command prompt window (hitting enter at the end of every line):
cd\
cd AndroidSDK\tools\
adb devices
browse the C:\AndroidSDK\tools\ as the path whe QtADB asks

up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply

Aaditya2 said:
up to the 17th step all procedure done succesfully.... bt after rebooting my phone just blinked and stuck on startup screen..... what to do?... reply
Click to expand...
Click to collapse
samsung galaxy SL screen Or the Boot Screen( Glowing SAMSUNG)??

samsung galaxy SL screen

Aaditya2 said:
samsung galaxy SL screen
Click to expand...
Click to collapse
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file

hmmm... ok... thanx... trying dat one!!!!!!!

Thanks dude. Easy method for deodexing

vivekkalady said:
have you tried the new method for deodexing
the recovery CWM method
try it using the zip file
Click to expand...
Click to collapse
dat also not worked.... i want to deodexing with your method... plz help me....

my phone wont reboot. its boot loop i think. what should i do?

[GUIDE] Lenovo P700 Root

IMPORTANT Info (read this before proceeding any further):
- Please back-up your system folder using any file manager (ES or file manager) before doing root. specifically the busybox file.
- Also, do a back-up of all your messages, contacts, call logs and apps using the Backup and restore application.
- Rooting your device will VOID its warranty.
- Download and use these files at your own risk. I will not be held responsible for any damages or failures that might happen to your PC or device.
What you need:
1. S2-4.0-root folder containing the root.exe. Download link* (Download this file and extract to your local drive. In my case I placed it on my drive D :\). By the way, This file was sourced from the MU forum.
2. USB Drivers (with ADB driver) here: Driver link.
3. ADB installed on your machine – see below.
*password <here>
ADB (Android Debug Bridge):
Information here: http://developer.android.com/tools/help/adb.html
1. Make sure that you can connect to your device via ADB before you continue rooting your beloved P700.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root Proper:
Once you have verified that you can connect to your device using ADB, then follow the steps detailed below.
1. Connect your P700 (powered ON) to your PC using the supplied USB cable.
2. Open command prompt and type “ADB devices”. This should show a set of numbers corresponding to your device (see screenshot on top). If not check ADB topic above.
3. Browse to the location where you placed the S2-4.0 folder. Open it and run P700_ROOTv1.0.exe (WARNING: this action would immediately reboot your device) and follow the instruction on screen.
4. Wait until your device is ready.
5. Hit Enter and your device will reboot again. Follow the on screen instruction and wait until your device is ready.
6. Hit Enter when your device has completely restarted.
7. Now you will be prompted with the following line: uid=0 <root> gid=0<root> (follow the instructions next to it). In my case - id is 0. If not, try again and repeat the procedure as mentioned in the instructions.
8. Hit Enter again and your device will reboot for a third time and you will see the following lines: Remount succeeded….....
9. Once your device is completely restarted, hit Enter and the windowed root dialog will automatically close.
Your device should now be rooted.
Screenshot of sequence above:
How to check if you are rooted
1. Use ADB shell and check that you can run su.
2. Use Root checker (download from Google play store).
3. Use ES file explorer or any file manager to enable Root explorer and mount the system folder. If you don’t have any issue with these steps then your device is already rooted.
ADB shell (rooted)
NOTES:
- The following files will be pushed to your system (Superuser, su , MobileUncle toolbox and RE Chinese).
- Root explorer (Chinese) will be installed on your device. You can opt to remove this app using Titanium backup.
- This process was tested on the current ROW(Rest of the World) build (P700_ROW_S108_120614), so I am not sure if this will work on other available builds out there.
- If you see or experience any issues, you can always do a factory Data reset (root will be preserved).
IMPORTANT Info (again):
- Please back-up your system folder using any file manager (ES or file manager) before doing root. specifically the busybox file.
- Also, do a back-up of all your messages, contacts, call logs and apps using the Backup and restore application.
- Rooting your device will VOID its warranty.
- Download and use these files at your own risk. I will not be held responsible for any damages or failures that might happen to your PC or device.
Acknowledgment:
Mobile Uncle Product forum and to the person who uploaded the Chinese instructions and files. Link to MU forum thread: http://products.mobileuncle.com/thread-128116-1-1.html
Lastly, Please pardon my English as it is not my native language
UPDATE: P700_ROW_S112_120707 firmware OTA release. Check here on how to restore root after the update

worked!

To those requesting for the Lenovo P700 phone codes. Here you go <click here>.

Download pass
EpsilonTheGreat said:
To those requesting for the Lenovo P700 phone codes. Here you go <click here>.
Click to expand...
Click to collapse
Hi, I tried to download the archive for root "S2..." and it asked for a password. Can you provide one for me or could you mirror the archive on another file sharer ?
Thanks

trying to get the etg-s2-4.0-root.zip file but it requires a password. maybe i missed it in the first post - what is it? thanks.

Alex_Hypnose said:
Hi, I tried to download the archive for root "S2..." and it asked for a password. Can you provide one for me or could you mirror the archive on another file sharer ?
Thanks
Click to expand...
Click to collapse
ditch_azeroth said:
trying to get the etg-s2-4.0-root.zip file but it requires a password. maybe i missed it in the first post - what is it? thanks.
Click to expand...
Click to collapse
You can download the password <here>

i shouldve known... nyahahahah. thanks. i appreciate it.

Does anyone know why this phone s not recognized in most parts of the world? I thought XDA dev would have it but even they don't list it in the phones section.!!
A friend is thinking of getting one and he was asking me to see if it was a good phone.

Hi Epsilonthegreat.
Maybe you can assist me:
I have taken the P700_ROW_S113, cooked in some modifications (most importantly I replaced the kernel) flashed it on my Lenovo A750
It looks like it is working well. Which I expected, as the P700 is just the A750 with a different screen, but the screen is in the kernel. Just like the P700i seems to be the A789 with a different screen.
I did so in the hope of getting the ROW "Rest Of World" languages. However, it seems to only contain Vietnamese in addition to English and Chinese.
Do you know if this is normal for the ROW's? Or did I download one that has already been tweaked, not the original?
Thanks

cybermaus said:
Hi Epsilonthegreat.
Maybe you can assist me:
I have taken the P700_ROW_S113, cooked in some modifications (most importantly I replaced the kernel) flashed it on my Lenovo A750
It looks like it is working well. Which I expected, as the P700 is just the A750 with a different screen, but the screen is in the kernel. Just like the P700i seems to be the A789 with a different screen.
I did so in the hope of getting the ROW "Rest Of World" languages. However, it seems to only contain Vietnamese in addition to English and Chinese.
Do you know if this is normal for the ROW's? Or did I download one that has already been tweaked, not the original?
Thanks
Click to expand...
Click to collapse
Hello cybermaus,
Unfortunately the P700 ROW version only have English, Vietnamese and Chinese on it. Maybe due to the reason that P700 ROW was only officially marketed on these areas.
Below is the Language screen shot on my unit.
Regards.

Yes, that is what i have. Thanks.
Its a pity, I had hoped to get a multilang version
But still the exercise was very useful. I now have a ROM as stable as the cleaned up A750, but even more cleaned up and better internationalized.
Anyway, a return gesture to the P700 community: I have written a small review of the Lenovo Security app, which you guys may want to put on your phones, as it works very well on it.

It worked! thanks man!

One-click can apply for P700
I can not root my device : S114_120903
It has some as One-click can apply for P700, thank you.

not connect ADB
I can not connect to my device via ADB :
Anyone can help, thank you

What is "password" ,i didnot see and unable to open it.plz tell me what can i do for password?
Sent from my Lenovo P770 using xda app-developers app

Sv: [GUIDE] Lenovo P700 Root
Will this work for P770?
Skickat från min GT-I9300 via Tapatalk 2

Please try the new SRS rooting methord , it worked on my P700

Sv: [GUIDE] Lenovo P700 Root
sagar_funk said:
Please try the new SRS rooting methord , it worked on my P700
Click to expand...
Click to collapse
So it will work on P770?
Skickat från min GT-I9300 via Tapatalk 2

Hi
What is src send me link.
Sent from my Lenovo P770 using xda app-developers app

[TOOL] schlexedeeler Tool V2 [ONLY ICS!] * ROOT Acer Iconia A210 [NOT USE ON JB!!]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lieckedeeler & schlex2010
aka SCHLEXEDEELER
ONLY USE THIS TOOL IF YOU HAVE AN ICS VERSION (4.0.4)
WE ARE NOT RESPONSIBLE FOR BRICK OR ANY OTHER ERRORS ON YOUR TABLET
WE ARE NOT RESPONSIBLE FOR BRICK OR ANY OTHER ERRORS ON YOUR TABLET
ONLY USE THIS TOOL IF YOU HAVE AN ICS VERSION (4.0.4)
- Root incl. su & busybox binary (install Superuser from Play Store)
- permanent RW on system folder
- adb root shell
- DVB-T USB support (schlexedeeler Kernel 1.1+)
- CWM Recovery with touch
Click to expand...
Click to collapse
DOWNLOAD SCHLEXEDEELER TOOL V2
=============================================================================================================================
If you want flash back stock kernel or/and stock recovery and stock bootanimation.zip
First step: Copy stcok bootanimation.zip to /system/media
Second step: Flash stock kernel & recovery
It is stock recovery and kernel out of ICS 4.0.4​​​
Download stock bootanimation.zip
Click to expand...
Click to collapse
Download Tool to flash stock kernel & stock recovery
Click to expand...
Click to collapse
Password for the 7zip files:
iknowtherisk!​
Click to expand...
Click to collapse

Thank you! Going to try this as soon as i get to my a210.

.... Placeholder ....

And you can just press the 3 point?, Only root, the kernel does not need to unlock me ....

Probably not. It dumps a CWR image to /dev (overwriting the factory recovery?), which is boot, so you have to be unlocked.
CWR is used to mount /system (rw) so that adb can push Superuser and some other binaries.
I got stuck, after loading up CWR. My Windows 7 (x64) couldn't recognize my A210 while CWR was running. Downloaded USB drivers through the Android SDK, and the Acer USB drivers, but neither of them did any good i continued with the rooting process (so that it could clean up after itself) but nothing got pushed to /system (which is no surprise, seeing my tablet was unrecognized). So, now i have an unlocked bootloader, no root, and i'm unable to get into recovery... nothing happens, if i hold volume down, while powering on. I have to press the reset button, to restart it properly.
Could it be that there are no drivers for Windows 7 x64?
Edit: ok, i've read through the topic at android-hilfe.de, and got it working (had to manually install the driver). Now i have root! Thank you!

help for dummies
deleted

deleted

does it give a instruction for this tool, it would be great
Greets

Is anyone working on a ROM or MOD for the Iconia A210 ?
Sent from my A210 using xda app-developers app

Hey 4.1.1 To have?

Alexey71 said:
Hey 4.1.1 To have?
Click to expand...
Click to collapse
What exactly is your question?
I don't know if it will work with 4.1.1, because I do not have 4,1.1 on my tablet! You have?

I get everything back to its factory state, or even be the standard kernel?

Alexey71 said:
I get everything back to its factory state, or even be the standard kernel?
Click to expand...
Click to collapse
Sorry for OT:
Please learn english, or use a better translater tool for your questions!
You use this tool at your own risk, so please stop bugging me with private messages AND forum posts!

Hy everybody
I tried to root my A210 yesterday using your program. But I point out some difference between what happen and the "how to".
First, I didn't have 4 option when I start the tool. I just have the bootloader option and a root option.
Following the "how to", I first activated the open mode to boot.Then, I choose the second choice (root) and that's when it didn't follow the "how to" document. My A210 did restart and boot to a*SCHLEXEDEELER edition but it never ask me to restore my data. And when it get restarted, everything was as it were.I also didn't have all the part about installing the driver because my PC still detect the tab as "adb interface".
I aldo never had the section about mount and unmount system.
Then the*SCHLEXEDEELER tool ask me if I wanted to install the custom recovery. As I was pretty scared of what might happened, I answered "no". So the tool ended.
I cheched on my tab but I was still not root so I did all that stuff again but choose "yes" instead of "no" for the custom recovery.The*SCHLEXEDEELER tool printed out many lines but one caught my attention.
It was something like :"data\tmp\cwm[...].img : no such file or dir".there is a file called "cwm[...].img" (the [...] is because I don't recall the exact name) in the folder in wich there is the*SCHLEXEDEELER tool.
But I didn't suceed in making it finding this file.
And when I checked whether I'm root or not, it turns out that I wasn't.
Any ideas or suggestion?
Still, thanks a lot for your job.

Tab acer A210 user said:
Hy everybody
I tried to root my A210 yesterday using your program. But I point out some difference between what happen and the "how to".
First, I didn't have 4 option when I start the tool. I just have the bootloader option and a root option.
Following the "how to", I first activated the open mode to boot.Then, I choose the second choice (root) and that's when it didn't follow the "how to" document. My A210 did restart and boot to a*SCHLEXEDEELER edition but it never ask me to restore my data. And when it get restarted, everything was as it were.I also didn't have all the part about installing the driver because my PC still detect the tab as "adb interface".
I aldo never had the section about mount and unmount system.
Then the*SCHLEXEDEELER tool ask me if I wanted to install the custom recovery. As I was pretty scared of what might happened, I answered "no". So the tool ended.
I cheched on my tab but I was still not root so I did all that stuff again but choose "yes" instead of "no" for the custom recovery.The*SCHLEXEDEELER tool printed out many lines but one caught my attention.
It was something like :"data\tmp\cwm[...].img : no such file or dir".there is a file called "cwm[...].img" (the [...] is because I don't recall the exact name) in the folder in wich there is the*SCHLEXEDEELER tool.
But I didn't suceed in making it finding this file.
Click to expand...
Click to collapse
FIRST OF ALL you don't read the thread correctly:​
The "How to" of Heroturtle is NOT for V2.0 Final Edition!! Do not use that "how to" !!​
So here is what the tool do if you select root:
Start your device into bootloader (fastboot mode)
Flash boot.img to your device via fastboot
Pushing binary files like su and busybox to your tablet
READY!
It's important that you have install all drivers correctly!
The 4 points are from the Versions before and are not necessary anymore now.
If you have done the root process, you must install SuperUser from the PlayStore! After that you have root!
Use only schlexedeeler Tool V2... You are confusing something and write about things that no longer exist in the new version!!! No restore my data. etc...

Sorry for my bad English
schlexedeeler Kernel 1.1, Not mount USB - NTFS format....

ok, got it.
I will try to install super user tonight and see if it's good.
I'll write a message to keep you inform about that.
thank you for your quick and pertinent reply

Tab acer A210 user said:
ok, got it.
I will try to install super user tonight and see if it's good.
I'll write a message to keep you inform about that.
thank you for your quick and pertinent reply
Click to expand...
Click to collapse
If not, please let me know, then we will find a solution for you, but I think if you do only that, what the tool tell you, you're on the right way :good:

Alexey71 said:
Sorry for my bad English
schlexedeeler Kernel 1.1, Not mount USB - NTFS format....
Click to expand...
Click to collapse
I will talk to lieckedeeler... Maybe he have a solution for that.

Minor Update 2.01:
* correct some missspellings
* correct adb command for flashing CWM recovery

[Root][0.7.2.751]Root bluestacks beta - 1 by moh erbil (0.7.2.751)

ROOT BLUESTACKS BETA-1 (0.7.2.751)​
HEY GUYZ, HERE IS A VERY EASY WAY TO ROOT BLUESTACKS BETA -1, BUT THE ONLY DISADVANTAGE IS THAT IT WORKS FOR ONLY VERSION 0.7.2.751.....
I HAVE TESTED THIS METHOD OF ROOTING AND IT WORKS PERFECTLY FOR ME AND WOULD LIKE TO SHARE IT WITH ALL OF YOU.
THINGS THAT YOU ARE GONNA NEED
1. FILE SPLITTER/JOINER SOFTWARE- DOWNLOAD IT FROM HERE AND INSTALL IT.
2. THREE ROOT FILES THAT YOU HAVE TO JOIN LATER USING THE ABOVE SOFTWARE.
DOWNLOAD THESE THREE. Remember that all the below three files should be in one folder.
ROOT.001
ROOT.002
ROOT.003
The password for the above files is : erbil. Thnx to Riyal for reminding me about the password.
METHOD OF ROOTING
1. Open File Splitter/Joiner Software and select the tab "JOINING" and click on the adjacent button showing "1".
2. Here you need to select the file Root.0.7.2.751.001 i.e. the first file you have downloaded and then click on join button and wait for it to complete.
3. After the completion of the above process, you will find a new Root.0.7.2.751.7z file in the same directory as the part files.
4. Open this and extract the Root.fs and README.txt file.
5. Stop all the BlueStacks processes form the TASK MANAGER
6. Copy the ROOT.FS file to (Windows 7) C:\ProgramData\BlueStacks\Android. OR in (Windows XP) and C:\Documents and Settings\All Users\Application Data\BlueStacks\Android
7. After this RESTART BlueStacks and you will have the root access.
For sure check it with an app like Root Checker.
WATCH THE NEW VIDEO OUT HERE FOR ROOTING METHOD
WATCH THE NEW VIDEO OUT HERE FOR ROOTING METHOD
Mounting /system as Read/Write was possible in this one (Look at the screenshot below). Looking further to get it fixed on other versions too.
HERE ARE SOME SNAPSHOTS OF IT.......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS:-
MOH ERBIL- For making the root.fs file
SHUBH (thats me) - For adding the tweaks for optimizing the RAM of BlueStacks acoording to your computer, and adding latest Google Play
IF YOU THINK I HELPED YOU THEN PLEASE PRESS THE THANKS BUTTON..

This file is password protected. Please enter the password here to unlock it.

THNx FOR REMINDING
Riyal said:
This file is password protected. Please enter the password here to unlock it.
Click to expand...
Click to collapse
SORRY I FORGOT TO MENTION THE PASSWORD
THE PASSWORD IS : erbil
THNX FOR REMINDING ME

Root 0.7.2.751.7z.003
password is wrong.
Thank you.

@mamazaki
try it once again i've checked it myself the password is correct it is erbil make sure you have typed it correctly!

shubhkirti1997 said:
@mamazaki
try it once again i've checked it myself the password is correct it is erbil make sure you have typed it correctly!
Click to expand...
Click to collapse
oh sorry and thank you.

mamazaki said:
oh sorry and thank you.
Click to expand...
Click to collapse
The most well known way to say thanks is to press the THANKS button, so please make a little effort for it...

GameCiH not work!
My BlueStacks is Rooted But GamesCiH2 still say not rooted!

It didn't worked for me man had to reinstall bluestacks...It took a long time to load with the root than usual..

HackmanPR said:
My BlueStacks is Rooted But GamesCiH2 still say not rooted!
Click to expand...
Click to collapse
Check it with Root checker whether your Bluestacks is rooted or not!!!

Okay, you were able to mount system as r/w, but I can't edit build.prop. What should I do? Would you like to help me?
When I type in adb console - adb root - it says that adbd is restarting as root - and that's all.

Is there a download for this version of Blue Stacks or an updated working Root.fs for Bluestacks version 0.7.3.2605 ?

Thank you
Root and work but I can not write within a file system is an example of that change the font or modify it? Is there a solution

AsylumServe said:
Is there a download for this version of Blue Stacks or an updated working Root.fs for Bluestacks version 0.7.3.2605 ?
Click to expand...
Click to collapse
Download this version from here :
http://cdn.bluestacks.com/downloads/0.7.2.751/BlueStacks_HD_AppPlayerPro_setup_0.7.2.751_REL.msi
AND DONT FORGET TO PRESS THE THANX BUTTON!!!

nabel_sweed said:
Thank you
Root and work but I can not write within a file system is an example of that change the font or modify it? Is there a solution
Click to expand...
Click to collapse
Can u please explain your problem a bit??

Slowdown!?
I've follow your instruction and my Bluestacks is now rooted. Thank you for that.
But after it had been rooted, it pretty slow itself down. Do you guys have experience this incident?
Could anybody help me out!?
Thanks in advance
Best regards

I'm at step 6 and encountered one problem when copying the root.fs, it says "the action cant be completed because the file is open in HD-BlockDevice.exe". I have also opened task manager and closed all programs starting with HD. Any help would be appreciated!

bluestacks v-(0.7.7.813)
how to root bluestacks version 0.7.7.813

Help!
I had 0.7.3.763 installed (and working). I wanted to try an app that needed a rooted version; so, I uninstalled 0.7.3.763 preserving user data and apps. I ran Eusing Free Registry Cleaner. I then installed 0.7.2.751 according to your instructions. When I came to the step of replacing root.fs, Windows (Vista w SP2) said the file was in use by another program -- even though the processes had been killed as instructed.
So, I rebooted in safe mode and still could not delete the original root.fs. So I rebooted into safe mode w command prompt and was finally able to replace the original root.fs.
One other thing to possibly be aware of... I have an older laptop; so, when I install BlueStacks, it tells me that it is installing a low res version.
The root.fs created by the install is 196083712 bytes. The replacement root.fs created by the above process is only 171966464 bytes.
After restarting windows into normal mode, BlueStacks just hangs on the Loading... screen. If I put back the original root.fs created by the Bluestacks installer, it runs fine, but is not -- of course -- rooted.

Thanks a lot root now works on my bluestacks running Win 64 bit
I'm a happy Droid now!!
Regards

[root] chuwi v10hd 3g

Hello ,
I find a way to root this very good tablet , the "CHUWI V10HD 3G 64GO" dual boot windows 8.1/android 4.4.2 and 4.4.4.
I have followed this website : http://tablette-chinoise.net/rooter-toutes-les-tablette-intel-x86-avec-supersu-t7014
Frist you need to download the rooting kit : http://ul.to/71jrzvgy
and the intel adb driver : IntelAndroidDrvSetup1.9.0.zip
On your computer ,unzip the "IntelAndroidDrvSetup1.9.0.zip" and run the .exe to install the driver
connect your tablet to your computer , and boot the tablet on android
On android ,activate the "Usb debug mode" from the developper menu
On your computer unzip the "Root-tablette-chinoise.net.rar" and launch the "3 Root-tablette-chinoise.net.bat"
follow the instrunction on your screen , and yeah it's done !!:highfive:
hope it helps.
mirrors:
Root-tablette-chinoise.net.rar
http://uptobox.com/egez2zpy2lls
IntelAndroidDrvSetup1.9.0.zip
http://uptobox.com/d3mmycfutzzt

funregis said:
Hello ,
I find a way to root this very good tablet , the "CHUWI V10HD 3G 64GO" dual boot windows 8.1/android 4.4.2 and 4.4.4.
I have followed this website : http://tablette-chinoise.net/rooter-toutes-les-tablette-intel-x86-avec-supersu-t7014
Frist you need to download the rooting kit : Root-tablette-chinoise.net.rar
and the intel adb driver : IntelAndroidDrvSetup1.9.0.zip
On your computer ,unzip the "IntelAndroidDrvSetup1.9.0.zip" and run the .exe to install the driver
connect your tablet to your computer , and boot the tablet on android
On your computer unzip the "Root-tablette-chinoise.net.rar" and launch the "3 Root-tablette-chinoise.net.bat"
follow the instrunction on your screen , and yeah it's done !!:highfive:
hope it helps.
Click to expand...
Click to collapse
can you please upload the rooting kit and adb drivers to xda servers or mediafire or mega. uploaded.to is not the most convienient. have to wait 3 hours to get the next filr

suspect008 said:
can you please upload the rooting kit and adb drivers to xda servers or mediafire or mega. uploaded.to is not the most convienient. have to wait 3 hours to get the next filr
Click to expand...
Click to collapse
I have added uptobox

funregis said:
I have added uptobox
Click to expand...
Click to collapse
thak you very much for fast action. hope to be in touch. any issues so far with the device? I only had it for 2 days but could not try it.

It's working fine. The battery is the only weak point.

funregis said:
It's working fine. The battery is the only weak point.
Click to expand...
Click to collapse
Yep noticed that, but its expected running a x86 processor and powerful hardware. Idle drain in android is higher than windows.
anyways, funregis, I cant get root with your script. I got drivers installed and adb works fine. it gets detected and device responds to adb commands. but root script is not working as intended.
I get lot of missing files messages in the script window. here I attach screen shot as I cant copy it.
can you recheck the script in bat file. I see that you are trying to copy the files to temp folder in devices data partition but I think im not seeing the source is declared correctly. so no file is being copied. im not much of a script guy so I dont know for sure exactly. can you help me.
Edit : checked, script seems to be correct.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

suspect008 said:
Yep noticed that, but its expected running a x86 processor and powerful hardware. Idle drain in android is higher than windows.
anyways, funregis, I cant get root with your script. I got drivers installed and adb works fine. it gets detected and device responds to adb commands. but root script is not working as intended.
I get lot of missing files messages in the script window. here I attach screen shot as I cant copy it.
can you recheck the script in bat file. I see that you are trying to copy the files to temp folder in devices data partition but I think im not seeing the source is declared correctly. so no file is being copied. im not much of a script guy so I dont know for sure exactly. can you help me.
Edit : checked, script seems to be correct.
View attachment 3349402
Click to expand...
Click to collapse
Have you set your tablet in "debug USB mode" from the developper menu on android ? I forgot to write this on the guide

funregis said:
Have you set your tablet in "debug USB mode" from the developper menu on android ? I forgot to write this on the guide
Click to expand...
Click to collapse
yep thats the basics right.
Your script works. I executed commands manually. all work fine. all the files get pushed and every command is in right way when executed manually. but just after the tab restart, all things get reset. im not sure about a workaround on this situation. do you have any idea?
I ve set usb debugging and drivers installed correctly and adb works fine.

suspect008 said:
yep thats the basics right.
Your script works. I executed commands manually. all work fine. all the files get pushed and every command is in right way when executed manually. but just after the tab restart, all things get reset. im not sure about a workaround on this situation. do you have any idea?
I ve set usb debugging and drivers installed correctly and adb works fine.
Click to expand...
Click to collapse
Strange it worked for me on android 4.4.2 and 4.4.4 , no idea of the problem if all command worked
When you launch the .bat have you "0/root" as id in the first prompt ?
I've uploaded the rooting kit with english translation (it can helps or not...)

funregis said:
Strange it worked for me on android 4.4.2 and 4.4.4 , no idea of the problem if all command worked
When you launch the .bat have you "0/root" as id in the first prompt ?
I've uploaded the rooting kit with english translation (it can helps or not...)
Click to expand...
Click to collapse
Yes ID is "0/root". its still the same as screen shot when ran the script bat file. im gonna try manual method again and without rebooting I will update the su binaries

Got the root
I achieved the root. just I had to manually push the files and everything. and without reboot I updated the binaries and now it sticks. so thank you for help and files.

Nice

OK, dudes. CONFIRMED ROOT android 4.4.4 with MOTOCHOPPER thanks to morlock8k's link: http://www.mediafire.com/?f4lipgd1hh3jug2