Database Info

Cant flash cm with cwm4? Then try this!

Guys, whoever is on cwm4 and can't get past the android text after flashing any cm...follow these steps:
1. Download the rom and put it on your sd card
2. Reboot into cwm(4), and then wipe data, cache and dalvic cache (it is under "advanced")
3. Important: Mount /system and then Format /system (both are under"mounts and storage")
4. Flash the downloaded rom
5. Reboot (this will take time!)
Note: this is valid for cwm4, as people are facing problems with it...
you could even upgrade to cwm5, or use this workaround...

[Q] rom install via cwm

Please excuse me as I am new to this....
I have a g2x rooted, nvflashed cwm and installed EaglesBlood build 5. Each time I have installed it after booting the phone into cwm and .... please see remaining post......
clean install of egb
1) Power down phone and restart / boot into clockworkMod Recovery v5.0.2.0
2) Select " -wipe data/factory reset -- Wiping data...
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Data wipe complete.
3) Select wipe cache partition -- Wiping cache...
Formatting /cache
Cache wipe complete.
4) Select -advanced
5) Select -Wipe Dalvik Cache E:unknown volume for path [/sd-ext]
Dalvik Cache wiped.
6) Select +++++Go Back+++++
7) Select -install zip from sdcard
8) Select -choose zip from sdcard
9) select -p999_6_26_12.zip
10) Select -Yes - Install p999-6-26-12.zip
Then follow the remainder of the configuration options of the install ( specifying 21y ) as an option and gaps from sd card and then run the installer. Install completes stating " Congratulations...
EaglesBlood has been installed into your devic
Installer Status:0
Can someone please tell me why I have an error " E:unknown volume for path [/sd-ext]" being displayed after selecting _wipe Dalvik cache. The phone then completes wiping Dalvik cache.'
As stated earlier, the program does install and apprears to run as well as egb build 4
Is there something I need to do to get this issue resolved. I have tried a different sd card as well as then formatting it with cwm and or in my computer (scanned it using win7) for errors and bad clusters, and copied files from my computer to the root on the sd card. I did root, flash CWM using nvflash, do a droid bachup prior to first installing EGB build 4. and now am at a loss as to how to remedy or repair this "unknown volume" issue on a new install.
Any and all help is GREATLY appreciated!!!
Thanks in advance.

I received that error before while wiping davlik. But only once after I reboot an tried again I never got it again. Am sure you tried that just giving my experience on it
Sent from my LG-P999

Its normal for are device we don't have sd ext.... That's why it skips over and continues
Sent from my LG-G2x using Tapatalk 2

So it is not dependent on baseband, kernel, rom, etc. It is just a g2x thing, and nothing to be concerned with while moding/flashing various rom's ? :good:

1800cc_HD_SE said:
So it is not dependent on baseband, kernel, rom, etc. It is just a g2x thing, and nothing to be concerned with while moding/flashing various rom's ? :good:
Click to expand...
Click to collapse
Yea its totally fine
Sent from my LG-G2x using Tapatalk 2

[Q] (solved) sony ericsson xperia x8 freezes on first "sony ericsson" logo

hi
SOLVED​sorry for my bad english
i have rooted my phone and installed cwm and so installed GingerDX 25 by this Structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
mount and storage > format system
instal zip from sd card
reboot
then the rom fully loaded (after about 5 minutes) and after a while working on it i pressed the power button and selected "reboot to cwm" and followed this structures to reinstall that file (GingerDX 25) again by this new structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
[COLOR="Red"]advanced > wipe battery status[/COLOR]
mount and storage > format system
instal zip from sd card
reboot
but after reboot i waited about 20 minutes but the phone is freezed on first "sony ericsson" (text logo) and now i cant load cwm with touching screen or clicking back button repeatly to restore my backup
i forced to pull out the battery
the bootloader isnt breaked
what should i do now ?

try help
tempfordroid said:
hi
SOLVED​sorry for my bad english
i have rooted my phone and installed cwm and so installed GingerDX 25 by this Structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
mount and storage > format system
instal zip from sd card
reboot
then the rom fully loaded (after about 5 minutes) and after a while working on it i pressed the power button and selected "reboot to cwm" and followed this structures to reinstall that file (GingerDX 25) again by this new structures :
Code:
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
[COLOR="Red"]advanced > wipe battery status[/COLOR]
mount and storage > format system
instal zip from sd card
reboot
but after reboot i waited about 20 minutes but the phone is freezed on first "sony ericsson" (text logo) and now i cant load cwm with touching screen or clicking back button repeatly to restore my backup
i forced to pull out the battery
the bootloader isnt breaked
what should i do now ?
Click to expand...
Click to collapse
stock kernel or naA / alfs kernel
or corrupt file / scandisk memory before copy file
or re download file

Install XDuosV3 1.5 for GT-S6102, Brick/Bootloop? Try this!

Sorry this is my first post.
I tried to share my experiences.
When I try to install XDuosV3 1.5 for GT-S6102.
by following these steps from http://forum.xda-developers.com/showthread.php?t=2118569
Download XDV3_ROM_1.5_PR
Download ClockWorkMod
Put them in the root of your SD Card ROOT just not a Folder
Switch off your phone
Go to Recovery mode by pressing Volume up + Home + Power Button
Use the volume keys to scroll Up and Down
wipe DATA
wipe CACHE
Choose Apply update from SD card
Choose CWM -> you will boot into CWM Recovery roomates a yellow colored text
Wipe DATA and CACHE via CWM again
Go to Advance
Wipe Dalvik Cache
Wipe Battery Stats
Go to Mount and Storage
format Cache
Data format
format System
Mounting System / Data and Cache
Press Back Button
Choose Install Zip From SDCard
Choose zip from sdcard
THEN Select -> XDV3_ROM_1.5_PR
Choose "yes" ....
Wait for the installation to be finished
After that Reboot Cell Phone (do not do it)
After, Wait for installation to be finished
Wipe DATA and CACHE via CWM again
After that Reboot your Phone
sorry if I'm wrong.

Encryption Unsucessful Fix

I am trying to install an Oreo based ROM lineage os 15.1
Currently data partition is ext4
Latest Twrp installed
But still whenever I try to install any Oreo ROM I get encryption unsuccessful message and even after factory reset with yes I get stuck on same thing again and again and if I try to change recovery after installing ROM the phone gets stuck in boot loop can anyone please help to solve this problem

I think this will solve ur issue
Yup I have also the same problem first of all do all these steps I think it resolve your issue:-
1. Go to settings of TWRP and reboot recovery.
2. Now format all the internal storage if u have important files in internal storage skip this step
3. After that go to advanced wipe and select system and data one by one and change its format to ext4.
4. Now advanced wipe everything.
5. Thats all now you can install lineage 15.1
I did the same and its working properly in my phone.
This problem occurs due to change of format of data to f2f so convert it to EXT4 and its fine

when you did advanced wipe to evertything is data, cache, system, etc? i already did this but still saying me that my phone was encrypted and i have to unlock with the pin or my account but i get a loop even if i put the correct user and password.
Udgam Tiwari said:
Yup I have also the same problem first of all do all these steps I think it resolve your issue:-
1. Go to settings of TWRP and reboot recovery.
2. Now format all the internal storage if u have important files in internal storage skip this step
3. After that go to advanced wipe and select system and data one by one and change its format to ext4.
4. Now advanced wipe everything.
5. Thats all now you can install lineage 15.1
I did the same and its working properly in my phone.
This problem occurs due to change of format of data to f2f so convert it to EXT4 and its fine
Click to expand...
Click to collapse

Normal procedure. Fastboot boot command
Boot to TWRP.
Reboot to TWRP through reboot menu.
Factory reset.
Advanced wipe: change data file format to ext4
Reboot to TWRP through reboot menu again.
Wipe, format data.
Now wipe system, cache and dalvik.
Reboot to TWRP again.
Flash rom.
Gapps.
Magisk if wanted.
Wipe dalvik and cache.
Reboot and enjoy

Murkroow said:
when you did advanced wipe to evertything is data, cache, system, etc? i already did this but still saying me that my phone was encrypted and i have to unlock with the pin or my account but i get a loop even if i put the correct user and password.
Click to expand...
Click to collapse
Bro I already mentioned first of all you have to Factory reset but it will wipe all your data from internal storage so do have a back up for that. Encryption issue can only resolved by factory reset.

Check out my video
​It helped many people hope it helps you.
https://m.youtube.com/watch?v=Ov_Eq268_4U