Hello All,
The problem is that I am new on this platform so I cant start a new topic so please forgive me that I am posting under this current one as it best fits my own problem too.
I have Purchase a China Tab from a Local Store and this don't have any brand mentioned on it. All that was written on the pack is MID Android 10" Tablet PC Android 10-inch High Resolution. But I have got issues with it...
PROBLEM
1. The screen is not well calibrated... I think because when it is not plugged to anything, along a line on the screen, I cant type anything, if I need to type a key on that part, I have to move my finger a bit to the left so as to be able to get precision.
2 Whenever I plug it to power or computer, the screen gets distorted and I think that is because of the current going over it.. but y?
3. I cant install some other applications from Market because it says "Your Device isn't Compatible with this version" (but i can use same app on my Tab when i download from pc)
AND CAN I UPGRADE TO CUSTOM ROM LIKE JELLY BEAN?
Using Quadrant Advanced, I have the info below;
System
SDK Version: 4.0.3
ID: IML74K
OS name: Linux
OS Version: 3.0.8
Device
Model: T10A
Product: crane_evb
Board: crane
Brand: softwinners
Fingerprint: softwinners/crane_evb/crane-evb:4.0.3/IML74K/20120331:eng/test-keys
CPU
Name: ARMv7 Processor rev 2(v71)
Current freq: 1008MHz
Max freq: 1008Mhz
Min freq: 60MHz
Cores: 1
Architecture: 7
BogoMIPS: 1001.88
Hardware: sun4i
Revision: 2
Serial #:0000000000000000
Memory
Total: 833844kb
Free: 381136kb
Inactive: 227652
Diaplay
Resolution: 600x976
Refresh Rate: 58.72Hz
GPU(OpenGL)
Vendor: ARM
Renderer: Mali-400 MP
Version: OpenGL ES-CM 1.1
Max texture units: 8
Max Texture size: 4096
Max lights: 8
VBO: Supported
Frame Buffers: supported
Cube maps: supported
Texture combiners: supported
DOT3 ombiner: supported
crossbar combiner: unsupported
sam shaikh said:
Hello All,
The problem is that I am new on this platform so I cant start a new topic so please forgive me that I am posting under this current one as it best fits my own problem too.
I have Purchase a China Tab from a Local Store and this don't have any brand mentioned on it. All that was written on the pack is MID Android 10" Tablet PC Android 10-inch High Resolution. But I have got issues with it...
PROBLEM
1. The screen is not well calibrated... I think because when it is not plugged to anything, along a line on the screen, I cant type anything, if I need to type a key on that part, I have to move my finger a bit to the left so as to be able to get precision.
2 Whenever I plug it to power or computer, the screen gets distorted and I think that is because of the current going over it.. but y?
3. I cant install some other applications from Market because it says "Your Device isn't Compatible with this version" (but i can use same app on my Tab when i download from pc)
AND CAN I UPGRADE TO CUSTOM ROM LIKE JELLY BEAN?
Using Quadrant Advanced, I have the info below;
System
SDK Version: 4.0.3
ID: IML74K
OS name: Linux
OS Version: 3.0.8
Device
Model: T10A
Product: crane_evb
Board: crane
Brand: softwinners
Fingerprint: softwinners/crane_evb/crane-evb:4.0.3/IML74K/20120331:eng/test-keys
CPU
Name: ARMv7 Processor rev 2(v71)
Current freq: 1008MHz
Max freq: 1008Mhz
Min freq: 60MHz
Cores: 1
Architecture: 7
BogoMIPS: 1001.88
Hardware: sun4i
Revision: 2
Serial #:0000000000000000
Memory
Total: 833844kb
Free: 381136kb
Inactive: 227652
Diaplay
Resolution: 600x976
Refresh Rate: 58.72Hz
GPU(OpenGL)
Vendor: ARM
Renderer: Mali-400 MP
Version: OpenGL ES-CM 1.1
Max texture units: 8
Max Texture size: 4096
Max lights: 8
VBO: Supported
Frame Buffers: supported
Cube maps: supported
Texture combiners: supported
DOT3 ombiner: supported
crossbar combiner: unsupported
Click to expand...
Click to collapse
we can never be so sure on some china products nowadays especially when it is brandless lol
if it helps, try looking at the box your tablet came with and download their specific usb drivers
also, i doubt your tablet will get jellybean.
hope this helps
Related
Hi,
Recently i have bought a chienese rebranded tab, so there is no info about the manufacturer. Now I have messed up with the tab so I need the firmware and drivers to flash. If I could knew the manufacturer, then I could download the files I need. Please help me identify the manufacturer. It says it used allwiner A13 boxchip.
here is the specification:
SYSTEM (Android 4.1.1)
Model: HTS-200
Manufacturer: unknown
Device: HTS-200
Product: HTS-200
Brand: HTS
Android Version: 4.1.1 (Ice Cream Sandwich)
API Level: 15
Build ID: IMM76D
Fingerprint: iNet/nuclear_evb_rtl8723au/nuclear-evb-rtl8723au:4.0.4/IMM76D/20130920:eng/test-keys
DISPLAY (800x432)
Size: 800x432
Refresh Rate: 59.75 Hz
Default Orientation: Portrait
Physical Size: 5.68" (14.42 cm)
Logical Size: Normal
Density: 160 dpi (Medium)
Pixels Per Inch: X: 160; Y: 160.42
PROCESSOR (ARMv7)
Processor: ARMv7 Processor rev 2 (v7l)
Cores: 1
Max Frequency: 1200 Mhz
Instruction Sets: armeabi-v7a, armeabi
SIMD Instructions: NEON
MEMORY (353 MB)
System RAM: 353 MB
JVM Max Memory: 48 MB
Internal Storage: 1007 MB
External Storage: 1397 MB
FRONT CAMERA (1.3 megapixel)
BACK CAMERA (1.3 megapixel)
OPENGL 1.1 (Mali-400 MP)
GENERAL
Renderer: Mali-400 MP
Version: OpenGL ES-CM 1.1
Vendor: ARM
LIMITS
Texture Size: 4096x4096
Texture Units: 8
Viewport Size: 4096x4096
Modelview Stack Depth: 32
Projection Stack Depth: 32
Texture Stack Depth: 32
Lights: 8
COMPRESSED TEXTURE FORMATS
ETC1, Paletted
OPENGL 2.0 (Mali-400 MP)
GENERAL
Renderer: Mali-400 MP
Version: OpenGL ES 2.0
Vendor: ARM
GLSL Version: OpenGL ES GLSL ES 1.00
GRAPHIC MODES (RGBA 32bit)
SENSORS (1)
MXC622X 2-AXIS ACCELEROMETER
Vendor: MEMSIC
Range: 2.0 m/s²
Resolution: 0.15322891 m/s²
Power: 0.005 mA
Hello,
i have a USB-Endoscope-Camera (with 10m cable) to inspect my draining away. This works perfect with my Laptop.
I have a cheap 7" Tablet lying around...and try to get the USB-Camera to work. But no program recognizes the camera.
If i use the App "Dashcam" i get a message: "Device has no UVC Driver". I think that is the problem.
Here is the Device Info:
Code:
KV78PH 21
SYSTEM (Android 4.4.2)
Model: KV78PH-21
Manufacturer: KV78PH-21
Device: gs702c
Product: full_gs702c
Brand: Android
Android Version: 4.4.2 (Kit Kat)
API Level: 19
Build ID: KOT49H
Fingerprint: Android/full_gs702c/gs702c:4.4.2/KOT49H/eng.liuzi.20140701.121506:userdebug/release-keys
DISPLAY (800x480)
Size: 800x480
Refresh Rate: 59,89 Hz
Default Orientation: Portrait
Physical Size: 6,71" (17,05 cm)
Logical Size: Normal
Density: 160 dpi (Medium)
Pixels Per Inch: X: 131,95; Y: 141,77
PROCESSOR (ARMv7)
Processor: ARMv7 Processor rev 1 (v7l)
Cores: 2
Max Frequency: 1308 Mhz
Instruction Sets: armeabi-v7a, armeabi
SIMD Instructions: NEON
MEMORY (1024 MB)
System RAM: 1024 MB
JVM Max Memory: 64 MB
Internal Storage: 993 MB
External Storage: 5805 MB
BACK CAMERA (1,9 megapixel)
SUMMARY
Max Picture Size: 1600x1200 (4:3)
Zoom: 4x
Autofocus: Supported
Orientation: 90°
GRAPHICS
OpenGL 2.0
ACTIONS HARDWARE
actions.hardware.hdmi
ANDROID HARDWARE
android.hardware.bluetooth
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.autofocus
android.hardware.camera.front
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.sensor.compass
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.wifi
android.hardware.wifi.direct
ANDROID SOFTWARE
android.software.app_widgets
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.sip
android.software.sip.voip
Created with Hardware Info 4.2.6
The App "USB Host Diagnostics" found nothing when i connect the Camera to my tablet. I have testet on an Android Phone from my colleague...the cam works perfect.
I think without a UVC-Driver the Cam will not work. I have read that the UVC-Driver is in the Kernel. But I am not familiar with this.
I dont have found a way to update the Android on the Tablet. I have found no custom rom. Is there perhaps a way to get an other Rom to work?
Is there a way to get the camera to work with these Tablet? It would be better than an expensive smartphone or an expensive laptop to use to inspect sewer pipes.
Many thanks.
System:Operating system: Android 8.1 Oreo system Installation type: Single 1DIN size Resolution: 1024 * 600 capacitive touch screen display CPU processor: FYT SC7731E 1.3 GHz quad-core GPU: CoreARMMali-T820, 600 MHz RAM: LPDDR4 1 GB Memory: EMMC 16 GB
good day I got my Joying 7 inch car radio today and unfortunately it has no zlink but unfortunately only easy connect which only streams the screen of my iPhone. I would like to install zlink now, but where can I get the version for the android 8.1 system? Or where can I possibly update my system to android 9 or 10? Thank you in advance for the help !!!
I've got a very cool tiny fairly-smart phone that I've used for traveling, running on OS 4.0.4 . Heavily use whatsapp to contact friends, family, locals on it, but I just found out that around November (2021), WA is going to up their minimum to OS 4.1, so I'll lose it unless I toss this phone and swap the account to a newer phone.
-Does anyone have any clue as to any upgrade OS available for this venerable device?? -There's no OS ugrade available from the manufacturer (THL), unfortunately.
Seems like a massive waste to throw away the phone, in that it does the job, the camera is actually acceptable, Waze and its GPS makes for a good road trip worldwide (of course, covid for now is shutting that down), mini-opera fits OK as a browser, have watched youtube in small airports,-and it's also incredibly sturdy...
Not even sure if I'm one of the remaining few to have one running (got a "new" clone battery from aliexpress, but, heck, it's a clone phone that sings when you turn it on [THL==Technology Happy Life], so that worked out fine ;-).
Just in case, I'm copying the full Droid Info details below here (check out those 2013 specs!! ;-).
Hope someone can help out on this! -No need to get to a very new OS - it doesn't have much space, -even 4.1 is good enough...
-Hmmm, as a thought, -any way to hack it's play service interface to fool apps (let's say WA) to think it's 4.1 ??
Thanks for your help and time!!
DEVICE
Model: CJ ThL (bird77_a_cu_ics2)
Manufacturer: ThL
Baseband Version: MAUI.11AMD.W12.22.SP.V7, 2012/08/20 16:40
RIL Version: mtk gemini ril 1.0
Build Number: CJ-ThL.121008.6577.COM.EN
Build Fingerprint: ThL/bird77_a_cu_ics2/bird77_a_cu_ics2:4.0.4/IMM76D/1349688250:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Ice Cream Sandwich MR1 (4.0.4)
SDK: 15
DISPLAY
Resolution: HD, 720x1280 pixels
Software Density: 320 dpi (xhdpi)
Refresh Rate: 48.44 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 0 (v7l)
Board: bird77_a_cu_ics2
Chipset: MT6577
Cores: 2
Clock Speed: 250 MHz - 1001 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU Governor: hybrid
Kernel Version: 3.0.13
Kernel Architecture: armv7l
GRAPHICS
Renderer: PowerVR SGX 531
Vendor: Imagination Technologies
OpenGL Version: OpenGL ES 2.0
RAM
Total: 970 MB
Java Heap: 64 MB
STORAGE
Internal: 2 GB
External: 14.7 GB
PRIMARY CAMERA
Resolution: 8 MP
Flash: Yes
Video Resolution: null
Supported Resolutions:
Image:
640x480
1280x960
1600x1200
2048x1536
2560x1920
3264x2448
Video:
SECONDARY CAMERA
Resolution: 3.1 MP
Video Resolution: null
Supported Resolutions:
Image:
320x240
640x480
1024x768
1280x960
1600x1200
2048x1536
Video:
FEATURES
Bluetooth: Yes
Bluetooth LE: Unknown
GPS: Yes
NFC: No
USB Accessory: Yes
WiFi: Yes
WiFi Direct: Yes
BATTERY
Technology: Li-ion
Health: Good
SENSORS
AMI304 Orientation sensor
ADXL345 3-axis Accelerometer
CM3623 Proximity Sensor
CM3623 Light Sensor
Created by Droid Info
Why not ask OEM whether an upgrade is available or not?
jwoegerbauer said:
Why not ask OEM whether an upgrade is available or not?
Click to expand...
Click to collapse
Sorry, -my fault for being vague:
There is no upgrade from the manufacturer (OEM) available... -I'll try to edit my post up there w that info
Thank you for this forum! It has been very helpful for me to improve a number older tablets with fresh firmware from dedicated folks.
Now, I have an old generic tablet I am trying to save from the trash, and need help to identify it.
The brand is Neutab, specifically a Neutab X7. Amazon sold them for a while. A cheap KitKat tablet with Bluetooth.
Got this one in 2015(!) ASIN: B00RCA2OFK, listed as NeuTab® X7 7'' Quad Core Google Android 4.4 KitKat Tablet PC, Bluetooth, HD Dual Camera, 1GB RAM, 8GB ROM.
What is the right forum to ask for tips in identifying and building and installing a more modern firmware?
The device build fingerprint is alps/X7/X7:4.4.2/KOT49H/1418107401:user/test-keys
The MAC address starts off with 8c:84:01:c8 which IEEE shows as a "private" vendor.
Hardware serial number is RGIZSGDANZS47LSK
I did get Google Play on to it at one point, but now Google Play has constant "Unfortunately" messages.
CPU info:
55|[email protected]:/data $ cat /proc/cpuinfo
Processor : ARMv7 Processor rev 3 (v7l)
processor : 0
BogoMIPS : 2590.72
processor : 1
BogoMIPS : 2590.72
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 3
Hardware : MT8127
Revision : 0000
Serial : 0000000000000000
Suggestions on now to proceed?