System:Operating system: Android 8.1 Oreo system Installation type: Single 1DIN size Resolution: 1024 * 600 capacitive touch screen display CPU processor: FYT SC7731E 1.3 GHz quad-core GPU: CoreARMMali-T820, 600 MHz RAM: LPDDR4 1 GB Memory: EMMC 16 GB
good day I got my Joying 7 inch car radio today and unfortunately it has no zlink but unfortunately only easy connect which only streams the screen of my iPhone. I would like to install zlink now, but where can I get the version for the android 8.1 system? Or where can I possibly update my system to android 9 or 10? Thank you in advance for the help !!!
Related
Hello All,
The problem is that I am new on this platform so I cant start a new topic so please forgive me that I am posting under this current one as it best fits my own problem too.
I have Purchase a China Tab from a Local Store and this don't have any brand mentioned on it. All that was written on the pack is MID Android 10" Tablet PC Android 10-inch High Resolution. But I have got issues with it...
PROBLEM
1. The screen is not well calibrated... I think because when it is not plugged to anything, along a line on the screen, I cant type anything, if I need to type a key on that part, I have to move my finger a bit to the left so as to be able to get precision.
2 Whenever I plug it to power or computer, the screen gets distorted and I think that is because of the current going over it.. but y?
3. I cant install some other applications from Market because it says "Your Device isn't Compatible with this version" (but i can use same app on my Tab when i download from pc)
AND CAN I UPGRADE TO CUSTOM ROM LIKE JELLY BEAN?
Using Quadrant Advanced, I have the info below;
System
SDK Version: 4.0.3
ID: IML74K
OS name: Linux
OS Version: 3.0.8
Device
Model: T10A
Product: crane_evb
Board: crane
Brand: softwinners
Fingerprint: softwinners/crane_evb/crane-evb:4.0.3/IML74K/20120331:eng/test-keys
CPU
Name: ARMv7 Processor rev 2(v71)
Current freq: 1008MHz
Max freq: 1008Mhz
Min freq: 60MHz
Cores: 1
Architecture: 7
BogoMIPS: 1001.88
Hardware: sun4i
Revision: 2
Serial #:0000000000000000
Memory
Total: 833844kb
Free: 381136kb
Inactive: 227652
Diaplay
Resolution: 600x976
Refresh Rate: 58.72Hz
GPU(OpenGL)
Vendor: ARM
Renderer: Mali-400 MP
Version: OpenGL ES-CM 1.1
Max texture units: 8
Max Texture size: 4096
Max lights: 8
VBO: Supported
Frame Buffers: supported
Cube maps: supported
Texture combiners: supported
DOT3 ombiner: supported
crossbar combiner: unsupported
sam shaikh said:
Hello All,
The problem is that I am new on this platform so I cant start a new topic so please forgive me that I am posting under this current one as it best fits my own problem too.
I have Purchase a China Tab from a Local Store and this don't have any brand mentioned on it. All that was written on the pack is MID Android 10" Tablet PC Android 10-inch High Resolution. But I have got issues with it...
PROBLEM
1. The screen is not well calibrated... I think because when it is not plugged to anything, along a line on the screen, I cant type anything, if I need to type a key on that part, I have to move my finger a bit to the left so as to be able to get precision.
2 Whenever I plug it to power or computer, the screen gets distorted and I think that is because of the current going over it.. but y?
3. I cant install some other applications from Market because it says "Your Device isn't Compatible with this version" (but i can use same app on my Tab when i download from pc)
AND CAN I UPGRADE TO CUSTOM ROM LIKE JELLY BEAN?
Using Quadrant Advanced, I have the info below;
System
SDK Version: 4.0.3
ID: IML74K
OS name: Linux
OS Version: 3.0.8
Device
Model: T10A
Product: crane_evb
Board: crane
Brand: softwinners
Fingerprint: softwinners/crane_evb/crane-evb:4.0.3/IML74K/20120331:eng/test-keys
CPU
Name: ARMv7 Processor rev 2(v71)
Current freq: 1008MHz
Max freq: 1008Mhz
Min freq: 60MHz
Cores: 1
Architecture: 7
BogoMIPS: 1001.88
Hardware: sun4i
Revision: 2
Serial #:0000000000000000
Memory
Total: 833844kb
Free: 381136kb
Inactive: 227652
Diaplay
Resolution: 600x976
Refresh Rate: 58.72Hz
GPU(OpenGL)
Vendor: ARM
Renderer: Mali-400 MP
Version: OpenGL ES-CM 1.1
Max texture units: 8
Max Texture size: 4096
Max lights: 8
VBO: Supported
Frame Buffers: supported
Cube maps: supported
Texture combiners: supported
DOT3 ombiner: supported
crossbar combiner: unsupported
Click to expand...
Click to collapse
we can never be so sure on some china products nowadays especially when it is brandless lol
if it helps, try looking at the box your tablet came with and download their specific usb drivers
also, i doubt your tablet will get jellybean.
hope this helps
Hi!
I'm looking for any kind of firmware to the following tablet:
Serioux S9742TAB
9.7 inch IPS display (1024*768)
AllWinner A31s Cortex-A7 Quad core 1.2Ghz
GPU SGX544
1GB RAM
It is very similar to this model:
9.7 inch Q97S Allwinner A31S Cortex-A7 Quad Core Android 4.2 Tablet PC 1024*768 IPS Dual Cameras 1G/16G with Bluetooth - Silver:
Operating System: Android 4.2
Model: Q97S
Announced: 20130619
Product Type: Tablet PC
Keyboard: Touch Screen
Display Technology: capacitive touch screen
Screen Size: 9.7
Max Resolution: 1024*768
CPU Type: A7
CPU Manufacturer: Allwinner
CPU Model: A31S
CPU Speed: 1.0GHZ
RAM / Technology: DDR3
RAM Installed Size: 1GB
Hard Drive Type: NAND FAST FLASH
Hard Drive Capacity: 16G
PCMCIA Expansion: T-FLASH(Support 16G MAX)
Camera: 0.3MP+2.0MP
HDMI: 1080P
3G: Supporting external 3G modem
G-Sensor: Four way
Audio: Built in stereo speakers/Built in Microphone
Software: Youtube/Facebook/Twitter/MSN/Android market/Skype/Calculator/Google Mail/Google maps/iReader/Quick Office
Language: Multi-language support
Battery Type: 6000mAH
Battery / Run Time(up to): 4--6H WIFI OFF
Hi
Thanks for writing to us at XDA Assist. Unfortunately I'm unable to find any firmware for your device on XDA.
Can anyone help me with this tablet still new out of the box has the memory leak problem. Can anyone help me fix and or root this tablet so I can use it without it dropping apps when i load them to use? Has not been unlocked or had anything done to it. I have been looking high and low for any info to help me out. Thank you all I like this site and lime what you all do for us..
Carrier: Verizon Brand:
Nextbook
Hardware Connectivity: USB, Bluetooth MPN:
NXA101LTE116
Features: Pogo Keyboard with two standard 2.0 USB Ports, • Support 3 -axis G-sensor, • Micro-SD card slot for expansion to 64GB, • Built-in microphone, • Bluetooth 4.0, • 1GB DDR3L; 16GB onboard storage, • 10.1 inch High-resolution 1280 x 800 IPS Screen, Touch Screen, Media Player, LCD Display, Built-In Rear Camera, Built-In Front Camera, Backlight Product Line: Ares 10L
Processor Speed: 1.8GHz Operating System: Android 5.0.X Lollipop
Resolution: 1280 x 800 Screen Size: 10.1"
Processor: Intel® Atom™ Quad-Core /1.8GHz (Z3735G) Storage Capacity: 16GB
RAM: 1GB DDR3L Color:
Black
UPC:
Does not apply
Internet Connectivity: Wi-Fi + 4G LTE
Thread closed / Duplicate
Can anyone help me with this tablet still new out of the box has the memory leak problem. Can anyone help me fix and or root this tablet so I can use it without it dropping apps when i load them to use? This tablet is all stock has not been unlocked or had anything done to it. I have been looking high and low for any info to help me out. Thank you all I like this site and lime what you all do for us..
Carrier: Verizon Brand:
Nextbook
Hardware Connectivity: USB, Bluetooth MPN:
NXA101LTE116
Features: Pogo Keyboard with two standard 2.0 USB Ports, • Support 3 -axis G-sensor, • Micro-SD card slot for expansion to 64GB, • Built-in microphone, • Bluetooth 4.0, • 1GB DDR3L; 16GB onboard storage, • 10.1 inch High-resolution 1280 x 800 IPS Screen, Touch Screen, Media Player, LCD Display, Built-In Rear Camera, Built-In Front Camera, Backlight Product Line: Ares 10L
Processor Speed: 1.8GHz Operating System: Android 5.0.X Lollipop
Resolution: 1280 x 800 Screen Size: 10.1"
Processor: Intel® Atom™ Quad-Core /1.8GHz (Z3735G) Storage Capacity: 16GB
RAM: 1GB DDR3L Color:
Black
UPC:
Does not apply
Internet Connectivity: Wi-Fi + 4G LTE
Hello,
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
Hello,
MacBook air late 2008 model PC Bliss OS v11.10 64 bit uefi installation I do not open, black screen on the console # menu remains.
Ubuntu 19.04 version of Macbook air 2008 works very well.
This PC is also running Remix OS 3 installation. Remix OS is up to Android 6, I don't like android 6. I want him to install Android 9 for Bliss OS.
Remix OS dual boot UEFI as I did the installation.
I changed the boot menu to DATA = INSTALL = 1 DPI = XXX.
What should I do if I want to install Bliss OS?
My opinion is that the Nvidia Video card does not come with relevant display.
Code:
Specifications
Codename: MacBook Air.
Processor Speed: 1,6 GHz (Late-2008); 1.86 GHz, 120 GB of storage (Late-2008); 1.86 GHz, 128 GB of storage (Mid-2009); 2.13 GHz (Mid-2009).
Boost Speed: N/A.
Processor Architecture: 64-bit.
Processor type: Air Core 2 Duo (SL9300, SL9400, SL9600) “Penryn” (original).
Processor upgrade: soldered.
Cores: 2.
Graphics core: Yes.
On-Board RAM: 2 GB, DDR3 1066 MHz.
Max. RAM: non-upgradeable.
Display: Retina 13.3-inch, LED-backlit TFT active matrix IPS, 16:10 widescreen, 1280 x 800 pixels max resolution.
Webcam: iSight, 640 × 480 resolution.
Graphics: NVIDIA GeForce 9400M graphics with 256 MB of shared DDR3 memory and Micro-DVI output.
Storage: 120 GB or 128 GB SSD.
Fusion Drive: No.
Input\Output: USB 2.0, analog audio out and Mini DisplayPort video out.
Power Connector: MagSafe.
Battery: inbuilt lithium-ion polymer, 37-watt-hour (Late 2008 version) or 40-watt-hour (Mid-2009 version).
Internet \ Wireless connection: inbuilt AirPort Extreme (802.11a/b/g/n), Bluetooth 2.1+EDR.
Preinstalled OS: 10.5.1 (9B2324).
OS max. upgrade: X 10.7.5 or X.10.11.x
Dimensions: .16-.76 x 12.8 x 8.94 inch.
Weight: 3 lb.