Database Info

Bypass Gmail sign-in, Bypass passwords, Bypass screen lock drawing!!!!!

I read this over at tmonews...
"While playing with my G today, I found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs."
Very interesting

bps725 said:
I read this over at tmonews...
"While playing with my G today, I found a way to enter "safe mode" which will bypass the initial gmail signin and allow you to straight to the good stuff with out activating via google. You can also bypass the security drawing pattern.
1. Power off your device
2. While device is powering back on press and hold the "menu" key, keep holding it past the G1 and android splash screen.
Phone will boot all the way to the main screen and display "safe mode" in lower left corner.
I have confirmed that data is still fully operational and all of my downloaded programs."
Very interesting
Click to expand...
Click to collapse
How about a ROM DUMP?

I think there's already a thread or two about that.

im sorry to say this but the safe mode does not allow to bypass the initial activation screen but it sure does bypass the security screen

artyr0x said:
im sorry to say this but the safe mode does not allow to bypass the initial activation screen but it sure does bypass the security screen
Click to expand...
Click to collapse
Correct I already posted about this. You still have to activate service with Tmobile and Google. Safe mode on the phone is just like on a regular computer help you fix issues.

speoples20 said:
Correct I already posted about this. You still have to activate service with Tmobile and Google. Safe mode on the phone is just like on a regular computer help you fix issues.
Click to expand...
Click to collapse
It runs exactly as u would have it if it wasnt in safe mode the only difference is that u can bypass the security screen and attempt to change the security lock i'll play around wit it later on today

Well being the moder I am. I was smart enough to download that converter program floating around before reading about it and I get non stop errors on the home screen.. but for w/e reason running the phone in safe mode does not let the program load so I get no errors now but I can't unintsall it from the applications uninstall from settings.. it gives me an error when iit treys to compute the program sizes so I I can not run the phone when not in safe mode.. would be awesome if someone could help me here

try connecting it to the computer in debug mode and uninstall using adb

i have been google searching for two hours and i have yet to find how to put commands into the g1 i got the drivers and everything and its recoginzed by my comp but i dont know where i type adb shell uninstall or w/e can you direct me in the right direction?

you need to download the SDK from google. You should see some threads with the SDK or the Emulater... it is all the same. adb is in the tools thread. Ohh and you need to enter "adb -d uninstall (name of apk)"

i tried this and no luck the system still crashes... and you know i wouldnt mind loading factory defaults its just i use shazam and i already have over 150 tags that i do not want to lose and thats all i really need to back up... but i can not access the file system on the phone unless i am missing something :/ this is really killing me i hate when i cant fix something

Disabled said:
i tried this and no luck the system still crashes... and you know i wouldnt mind loading factory defaults its just i use shazam and i already have over 150 tags that i do not want to lose and thats all i really need to back up... but i can not access the file system on the phone unless i am missing something :/ this is really killing me i hate when i cant fix something
Click to expand...
Click to collapse
you sure it doesn't save that info on the memory card?

no nothing application saves to the memory card.. well besides amazon for the mp3 market i think. unless those are the tags? i dont know can you confirm? again thanks for the help man

I just tested and you are correct it doesn't save to the SD card... weird why it wouldn't a couple other applications do besides amazon.

I have G1 in my Hand in India but sad thing is its an Unactivated Phone.
I can easily unlock Sim by using Remote Unlock code for my IMEI provided by some Sellers on web. But how can a Activate the phone in India.
I know the t-mobile Activated SIM Trick for phone using some borrowed Sim card but in India its Impossible.
Help, please Help

google g1
ok i really need help i got my phone from the U.S and i live in canada it is unlcoked but it wont work i cant bypass the gmal sign in i tried the steps for the safe mode but the safe mode sign comes up at the bottom but it just stays at the one creen where it says touch to begin your setup for gmail i try to setup but it says my sim is wrong how do i fix this please help

JayMan26403 said:
ok i really need help i got my phone from the U.S and i live in canada it is unlcoked but it wont work i cant bypass the gmal sign in i tried the steps for the safe mode but the safe mode sign comes up at the bottom but it just stays at the one creen where it says touch to begin your setup for gmail i try to setup but it says my sim is wrong how do i fix this please help
Click to expand...
Click to collapse
google is your best friend. try searching for a solution. all you have to do is change the APN settings to rogers/fido and go through the gmail activation.

hetaldp said:
I have G1 in my Hand in India but sad thing is its an Unactivated Phone.
I can easily unlock Sim by using Remote Unlock code for my IMEI provided by some Sellers on web. But how can a Activate the phone in India.
I know the t-mobile Activated SIM Trick for phone using some borrowed Sim card but in India its Impossible.
Help, please Help
Click to expand...
Click to collapse
im in Mumbai using my G1 for the last few weeks. read here

safe mode works on the M580 but FAILS to bypass the lock screen password.

HTC Android Tool
★★★ WORLD FIRST ★★★
Bypass Google Account Just ONE CLICK
http://forum.gsmhosting.com/vbb/f75...bypass-google-account-just-one-click-1556888/​

Unlock your TP2 for Free (So far Sim unlock)

I bought a used TP2 off of ebay the other day just to tinker with it. I've been playing with it for a week or so trying to unlock it, I know there is an unlocker made by Olipro/Cmonex available but I guess you have to pay for that. Although I have the Sprint TP2 and that one is Sim unlocked, but I was able to find a way to SIM lock/unlock it, I'm still trying to figure out how to turn Security off though, I mean setting Secu_Flag to 0. I I did a lot of searching but couldn't find any instructions about unlocking the TP2 for free. So here is what I found so far:
Step 1- HardSPL your TP2 (This is available for free)
Step 2- Load the following RUU rom to your TP2. It looks like this Rom when loaded to the RAM it enables some Atcmd commands that allows us to play with NV part of the ROM thus allowing us to Lock/Unlock: RUU_Signed.nbh (I couldn't post the link I need to post 8 times before I can) "mediafire.com/?n11beq12kk24hy5"
Step 3- Run the following Atcmd: (This sets the Simlock flags to 0 thus removing the Simlock:
[email protected]=0,1,code "where "code" is your MSL ( I set my MSL code to 000000 and found out that 22051978 worked too, I found this on the internet somewhere)
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
This only unlocks the SIM, I was able to toggle those on and Off on My Sprint TP2 without any problem. Now if only I can find the command that disables the Secu_Flag. I don't have a lot of experience with this maybe some of you guys have experience and could point me in the right direction to continue my small project I would appreciate it.

ccengineer said:
I bought a used TP2 off of ebay the other day just to tinker with it. I've been playing with it for a week or so trying to unlock it, I know there is an unlocker made by Olipro/Cmonex available but I guess you have to pay for that. Although I have the Sprint TP2 and that one is Sim unlocked, but I was able to find a way to SIM lock/unlock it, I'm still trying to figure out how to turn Security off though, I mean setting Secu_Flag to 0. I I did a lot of searching but couldn't find any instructions about unlocking the TP2 for free. So here is what I found so far:
Step 1- HardSPL your TP2 (This is available for free)
Step 2- Load the following RUU rom to your TP2. It looks like this Rom when loaded to the RAM it enables some Atcmd commands that allows us to play with NV part of the ROM thus allowing us to Lock/Unlock: RUU_Signed.nbh (I couldn't post the link I need to post 8 times before I can) "mediafire.com/?n11beq12kk24hy5"
Step 3- Run the following Atcmd: (This sets the Simlock flags to 0 thus removing the Simlock:
[email protected]=0,1,code "where "code" is your MSL ( I set my MSL code to 000000 and found out that 22051978 worked too, I found this on the internet somewhere)
[email protected]=0,2,code
[email protected]=0,4,code
[email protected]=0,8,code
This only unlocks the SIM, I was able to toggle those on and Off on My Sprint TP2 without any problem. Now if only I can find the command that disables the Secu_Flag. I don't have a lot of experience with this maybe some of you guys have experience and could point me in the right direction to continue my small project I would appreciate it.
Click to expand...
Click to collapse
so if i do this on a verizon tp2....it will sim unlock it so i can use other carriers....without costing me MONEY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

corypaul said:
so if i do this on a verizon tp2....it will sim unlock it so i can use other carriers....without costing me MONEY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Verizon is not US radio locked, so a Sim unlock should be all you need.

ccengineer said:
Verizon is not US radio locked, so a Sim unlock should be all you need.
Click to expand...
Click to collapse
so this would work on my verizon touch pro 2???

how do you issue these commands to the phone?

T_D_H said:
how do you issue these commands to the phone?
Click to expand...
Click to collapse
Hi there
Attached you will find a zip file containing two files RunATCommands.exe and result.txt. Create a new folder and unzip them to that folder.
You will also need to download pget.exe,prun.exe and pput.exe which you can find here: ( links have been blocked) in the same folder in addition to AtCmd.exe (Search for this using google)
Unzip the RunAtCommand.zip to the same folder where you saved the above p...exe files and Atcmd.exe. Make sure your phone is connected to activesync or windows mobile device center then run RunAtCommand.exe. You will have a form with a text box where you enter the AT commands you want to send to the phone. Click run command button, at the bottom you will get the result. If you are issuing a command that writes to the phone instead of just reading, and the result is 0, it's actually something like "0\r", you will have a success message too.
You might need .net framework installed on your PC too. and maybe you need to install EnableRapi.cab on your phone if you don't have it.
Let me know how it goes.

corypaul said:
so this would work on my verizon touch pro 2???
Click to expand...
Click to collapse
I don't have a Verizon TP2 phone to try it. I think it would.

ccengineer said:
I don't have a Verizon TP2 phone to try it. I think it would.
Click to expand...
Click to collapse
it dont....it only says the phone is sim unlock when turn the phone off from the software

corypaul said:
it dont....it only says the phone is sim unlock when turn the phone off from the software
Click to expand...
Click to collapse
Are you saying that you tried the above on a Verizon TP2 and it didn't work? Or are you saying that it does say the phone is Sim unlocked? What happened when you issued the at commands mentioned in the original post? Did you download pget,pput and prun and put atcmd.exe in the same folder as RunATcommands.exe?

ccengineer said:
Are you saying that you tried the above on a Verizon TP2 and it didn't work? Or are you saying that it does say the phone is Sim unlocked? What happened when you issued the at commands mentioned in the original post? Did you download pget,pput and prun and put atcmd.exe in the same folder as RunATcommands.exe?
Click to expand...
Click to collapse
yea i downloaded all of that and i issues the commands on the phone, i kept saying @SIMLOCK= 00 0 i think. Yes im saying this doesnt work, hold up wait. if you send meh that file atcmd.exe it might work. i,ve google all around and can not find itt. and i was saying if the phone is off, like in airplane mode it will say that my phone is sim unlocked
or you can email it to meh: [email protected]

corypaul said:
yea i downloaded all of that and i issues the commands on the phone, i kept saying @SIMLOCK= 00 0 i think. Yes im saying this doesnt work, hold up wait. if you send meh that file atcmd.exe it might work. i,ve google all around and can not find itt. and i was saying if the phone is off, like in airplane mode it will say that my phone is sim unlocked
Click to expand...
Click to collapse
If you don't have atcmd.exe then you don't have the basic requirements for this to work, so why are you saying it doesn't work? I'm baffled. How did you issue the commands if you don't have atcmd.exe? And how did you get back @Simlock=00 if you don't have atcmd? If you indeed got @Simlock=00 after issuing the command [email protected]?40 then your phone is sim unlocked. Try to insert a GSM sim card in it and try it. Tell me what do you get when you issue the command [email protected]?AA please.

ccengineer said:
If you don't have atcmd.exe than you don't have the basic requirements for this to work, so why are you saying it doesn't work? I'm baffled. How did you issue the commands if you don't have atcmd.exe? And how did you get back @Simlock=00 if you don't have atcmd? If you indeed got @Simlock=00 after issuing the command [email protected]?40 then your phone is sim unlocked. Try to insert a GSM sim card in it and try it. Tell me what do you get when you issue the command [email protected]?AA please.
Click to expand...
Click to collapse
ok well are you gonna tell meh where i can get the atcmd.exe file at or can you email it to meh.

i could have test this radio but i sold my spare motherboard of TP2 . but i will give it a try asap.

el_venga said:
i could have test this radio but i sold my spare motherboard of TP2 . but i will give it a try asap.
Click to expand...
Click to collapse
I wish I knew, I would have bought it from you for further testing. If anyone wants to sell their TP2 to me for a discount so I can do more testing on different versions of the TP2 please let me know.

Hey ccengineer, did you ever get yourself another tp2? Just noticed something interesting.
I put in a tmobile sim card into a Sprint deactivated tp2 and I got a voicemail notification even though the phone wouldn't register on the tmobile network. You surmised on the ppcgeeks thread that perhaps the US antennas or frequencies were not being assigned. However given that I am getting a voicemail notification every time I turn on the phone, I think the phone is able to talk to the towers. Perhaps there is a network ID blacklist in the NV Ram for Sprint phones.

The link on the first post is not working, can you upload the NBH file again please?

i want to try bur the file is miss...

please someone upload the patched nbh )

Was anyone able to get this working?

Anyone get it to work? Does this basically make the TP2 into a world phone? Any help is appreciated.

[Q] [HELP] Heat and signal problems on ZTE V970

Hi to all, I'm writing here because I had my first problems with my v970 (with etotalk rom). This evening I checked my mobile and I found that none of the sim was active (I was not in airplane mode) and I could not activate them, as if they were not in their slots. Meanwhile the upper part of the device began to heat up, so I tought it could be an antenna/receiver problem. I almost forgot to say that I installed Truecaller (deleting Contapps) and updated facebook and few others apps less than one hour before the event, but I already uninstalled them to exclude some of the possible causes. I'll gladly listen to any advice. Thank's in advance. GL

Restart, and see if it continues.

Already tried a lot of times, with or without sim cards. I also noticed an abnormal use of battery.

When did the problem start? What did you do before it started? Does your cellphone always have no signal, or does it come & go (sometimes SIM works, sometimes it doesn't)? Have you checked your APN settings?

post-mortem said:
When did the problem start? What did you do before it started? Does your cellphone always have no signal, or does it come & go (sometimes SIM works, sometimes it doesn't)? Have you checked your APN settings?
Click to expand...
Click to collapse
The problem started yesterday and I never experimented It till now. As I Said, before I encountered It, I updated some apps from the market and I changed the default caller manager (should I call It in this way?) with Truecaller. I also deleted my sim contacts
. I can't check apn because there are no apns to check (Android shows me the voice "mobile networks" but I can't select it
Update: I tried to restore the original rom, but the problem persists. I also made a check with the recovery, and it shows me that the device cannot detect sim cards. I begin to think that it's an hardware problem (ouch). Am I right?

What did you do in recovery that checks SIM cards? Are you talking about CWM recovery?

post-mortem said:
What did you do in recovery that checks SIM cards? Are you talking about CWM recovery?
Click to expand...
Click to collapse
Nope, it's the faulty recovery that etotalk sent me with the phone. I would like to install the cwm and flash another rom, but I'll leave that as the last option

If the recovery they sent you is faulty, then what good is it? If there's a custom recovery available for your phone, you might as well go with it, not that it'll solve anything by itself.
You might try inserting some kind of shim along with the SIM card to see if the extra pressure help make contact with the leads. Careful, of course, that whatever you stick in there doesn't stay behind.

post-mortem said:
If the recovery they sent you is faulty, then what good is it? If there's a custom recovery available for your phone, you might as well go with it, not that it'll solve anything by itself.
You might try inserting some kind of shim along with the SIM card to see if the extra pressure help make contact with the leads. Careful, of course, that whatever you stick in there doesn't stay behind.
Click to expand...
Click to collapse
I know about the recovery, but I was trying to don't invalidate the warranty (as if I'll ever use it...). Now I'm charging the phone, it's already the third time today...

Aw, heck. If you've got warranty, just send it in.

post-mortem said:
Aw, heck. If you've got warranty, just send it in.
Click to expand...
Click to collapse
Yep, I've got warranty, but sending it in China will cost me almost as much as buying a new one

Ok, I flashed a recovery and a custom rom, but nothing happened.The signal is still absent and the antenna heats up the same way as before. I tried to enter engineer mode and it shows me messages as "com.android.internal.telephony.CommandExcepti on: RADIO_NOT_AVAILABLE", "3G off. Cannot set", ecc... It also shows me "invalid IMEI" if I try to look at it and I cannot change it back with the AT +EGMR command (it says "Radio on" and "SIM State: ABSENT", altough the SIM card is in its slot).

I think you have to crack the case.

ArcheoGian said:
Ok, I flashed a recovery and a custom rom, but nothing happened.The signal is still absent and the antenna heats up the same way as before. I tried to enter engineer mode and it shows me messages as "com.android.internal.telephony.CommandExcepti on: RADIO_NOT_AVAILABLE", "3G off. Cannot set", ecc... It also shows me "invalid IMEI" if I try to look at it and I cannot change it back with the AT +EGMR command (it says "Radio on" and "SIM State: ABSENT", altough the SIM card is in its slot).
Click to expand...
Click to collapse
Hmmm... if your phone is reporting invalid IMEI numbers then I would try first to get that working as it should. Read this tutorial and re-write your IMEI numbers.
Then I would try the latest stock ROM, which is available on ZTE support website. Here is the direct link to the ROM.
If your phone still doesn't work after that, then I'm afraid you have a hardware problem.

I have had the telephone for more than one month with no problem. Trying every ROM made by Bruno with no problem at all with signal, but...
About 4 days ago, I started suffering exactly the same problems stated by ArcheoGian. I have tried everything (installing older Roms, rebooting, changing SIMs from 1 to 2, etc.) but unfortunately with no success. I just have to try to install the original ROM, but I supose it will be the same.
Afer a few reboots, I can make the telephone to search for a network, it founds it, it connects, it transfers data, I can make calls, but ramdomly (can be after 30 seconds, 30 minutes or maximum one hour) it disconnects and the red X of death (Xbox 360 times ) appears on top of the screen.
I can try to go and return from airplane mode, or search for networks that it won't re-connect.
I fear it can become a typical problem for this phone.
I am "delighted" to send it back to China and wait for two months to get it back (after explaining it to the seller and so on). Fingers crossed

@prinxo: did you buy it from eto...k? (I don't know if I can write the entire name of the seller)
Update: I tried everything it was told me (except to crack the case, at least not yet...), my last hope is to manually insert the IMEIs inside the data folder. There's just one problem: none of the methods suggested in the link posted by bcgngm works on my phone, so I need to generate the IMEIs whit my pc (I couldn't open the exe with windows 7, I'll try with win xp in a while, otherwise I have to ask someone to create it for me).

ArcheoGian said:
@prinxo: did you buy it from eto...k? (I don't know if I can write the entire name of the seller)
Click to expand...
Click to collapse
No, I bought it from another seller at Aliexpress.
As I thought: I tried to re-install an original ROM, and everything remains the same. I thought I was successfull but after one hour the phone disconnected itself from the network. After that moment, I need about 3 re-boots to get signal again and it lasts for just a few minutes.
At this point, I would disregard a software problem.
Happy happy to have to send it back to China.

ArcheoGian said:
Update: I tried everything it was told me (except to crack the case, at least not yet...), my last hope is to manually insert the IMEIs inside the data folder. There's just one problem: none of the methods suggested in the link posted by bcgngm works on my phone, so I need to generate the IMEIs whit my pc (I couldn't open the exe with windows 7, I'll try with win xp in a while, otherwise I have to ask someone to create it for me).
Click to expand...
Click to collapse
Why do you say it is not working? My preferred method is to use the adb commands (and for that you have to install Android SDK). Don't forget that when you type the commands there is no output message on the screen. The phone has to be restarted so that changes take effect.

bgcngm said:
Why do you say it is not working? My preferred method is to use the adb commands (and for that you have to install Android SDK). Don't forget that when you type the commands there is no output message on the screen. The phone has to be restarted so that changes take effect.
Click to expand...
Click to collapse
The third and the fourth ones are the only methods to restore IMEI I didn't try, just because I never used sdk and adb (and I'm not sure to be able to use them). I followed the others options (I also created the IMEI file with the russian program), but it continues to show me the "invalid IMEI" message. Can you help me, maybe showing me a good walkthrough?

This ADB Tutorial looks easy to follow. Check it out!

No Sim issue?

Okay I have a very interesting situation going on. So I have the Rogers GS2 LTE. Had it unlocked over a year ago. Anyway this weekend I decided to upgrade my step daugher's Captivate with the GS2 LTE. we are both rogers customers on the same account. Anyway, i put her sim card in the phone. and noticed that it wouldn't boot. Finally it booted but got the no sim card error. so I thought that was weird and used ODIN to go back to stock. Still had the issue. Went to Rogers and got a new SIM card for her phone and still got the error.
Then today at work, I was playing around with the phone but only had my Speakout sim card with me. I was in the service menu and i was frustrated so I just started to push buttons and low and behold it reconized the sim card and started to work. I must say I was very pleased with myself that I was able to get it working. (nothing recorded on what I did of course). So i set up the phone and download most of her apps, thinking how great it was that I was able to fix it.
Well I get home and proceed to put her SIM card in the phone. "No Sim Card" again..... So thinking that I screwed it up. I put the speakout sim back in and it works fine. (Speakout runs off rogers towers). I can swap them and rogers won't work but speak out will. now the funny thing I noticed is that with speakout it always shows my data connected at 4G even when I know speak out doesn't offer 4g and we don't have any 4G/LTE near my home.
So I am really at a loss. Since it works with speakout I know it's not a hardware issue. Unless it's a really messed up hardware issue. which only leaves me to the idea it has something to do with that service menu. Now what I am going to attemp is to flash back to stock (rooted her after I thought it was working properly) and then try playing with the menu again.
Either way this is one really messed up phone lolol So anyone else have any suggestions?

Okay so the saga continues.
Yesterday I again did a firmware upgrade via "Kies" and noticed that the phone was getting signal, so i made a test call and it went through fine with the rogers sim. Then all of a sudden went to "No sim inserted" again. Today applied the firmware update again and now i get an initial message of "the mobile network will be unavailable until you restart with a valid sim card" and then the no sim inserted.
This is really starting to drive me crazy lol
Any suggestions? might try taking it back to Gingerbread and then maybe ICS to see if that has any effect. Any other suggestions?

Hey everyone,
Still trying to figure this out So i can make the phone recognize the sim card by doing the following:
*#197328640#
[1] DEBUG SCREEN --> [8] Phone Control --> [5] Simulation --> [3] HW Watchdog wait about 30 seconds then press [1] Force CP Crash.
After this, it seems to dectect the speakout sim card again and work. However after a reboot the sim is not detected again. So from my thinking it's not a hardware issue. i.e. I don't need to replace the sim card "Card" so to speak. What do you all think?

ergott said:
Hey everyone,
Still trying to figure this out So i can make the phone recognize the sim card by doing the following:
*#197328640#
[1] DEBUG SCREEN --> [8] Phone Control --> [5] Simulation --> [3] HW Watchdog wait about 30 seconds then press [1] Force CP Crash.
After this, it seems to dectect the speakout sim card again and work. However after a reboot the sim is not detected again. So from my thinking it's not a hardware issue. i.e. I don't need to replace the sim card "Card" so to speak. What do you all think?
Click to expand...
Click to collapse
Actually i just tried this again and it doesn't always work. So i'm still at a loss on what the issue is.

[Q] Sim card not recognized - Stuck in flight mode

Hi guys, this is my first post on this forum.
I have a problem that is making me CRAZY. I will try to explain to you, and I will be sorry for my english (I am Italian).
I have 1+1 since two weeks, I had unlock bootloader, TWRP recovery, stock rom 38R and rooted.
Yesterday I lost my SIM card signal, so I rebooted my device. No sim card PIN asked to me, no signal again.
I've tried to make a phone call and an alert told me "To make a call disable flight mode".. but I don't have flight mode activated!
I have tried with my girlfriend's sim card, same thing.. no pin required, no signal.
I've tried anything.. wipe cache, dalvik, total, re-flashed rom (I have used this: http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-4-4-4-xnph38r-t2898098)
I don't kwow what to do..
More info:
I have my IMEI, I've read something about losing the IMEI code, but it's not my case.
Thank you.

I know that you have reflashed and everything , but could you try this once ?
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541

not tried this solution, do you think it can helps?

someone? please..

Stupid question, do you actually have the SIM in the right way? It's very easy to put it in the wrong way on this phone.
Transmitted via Bacon

I am sure...
opo doesn't say to me "no sim", he tells me that I have to disable flight mode to have a call..!
I have tried anything

alberto91pa said:
I am sure...
opo doesn't say to me "no sim", he tells me that I have to disable flight mode to have a call..!
I have tried anything
Click to expand...
Click to collapse
Did you try the "stock " thing i had posted above ? Doesnt hurt to try as it is a 5 minutes job..you just have to double click the batch file
in your case that would be the firts thing i would have tried..

I did. I've made my 1+1 back to stock with One Toolkit, with 33r. Nothing happens.

timmaaa said:
Stupid question, do you actually have the SIM in the right way? It's very easy to put it in the wrong way on this phone.
Transmitted via Bacon
Click to expand...
Click to collapse
This.
When I got a new sim at AT&T, the guy was telling me how he's seen a handful of OPO and none of them work on this network. Sure enough, he puts in a new sim and it doesn't work. Then he starts playing with mobile settings etc. After a few minutes I ripped the phone out of his hand, eject the sim and discovered he had it backwards. Worked fine after that.
Sent from my A0001 using XDA Free mobile app

yeah, ok, but my sim card is in the right way.
When i open and close sim slot it ask me for the pin.
And then... nothing.

no one? please!

alberto91pa said:
no one? please!
Click to expand...
Click to collapse
I have the same problem
Mine has a ROM stock, I didn't changed anything from when I received it.
Today I decided to have a lock screen with a pin code (because I must have a pin code on the lock screen to allowed reading my job emails via MS Exchange).
After defining it, I rebooted my smartphone but it does not ask me for the mobile pin (the one I just defined), it does not ask me the SIM pin code, and it displayed the normal screen (with all of my widgets and shortcuts).
Because I didn't enter a SIM pin code, the network could not be found
I removed the screen lock protection, but the SIM pin code is still never asked, so I cannot send or receive any call.
The only way I found is to remove and reinsert the SIM card while the mobile is powered on.
So, there is 2 problems:
The SIM pin code is never asked
The lock screen is never displayed

Airplane mode turning on when sim inserted
Hi,
By any chance did you resolve this issue...My OnePlus one is doing same now....when i insert the sim it turns on airplane mode automatically(only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode). This is a weird issue am facing and cant explain properly...Now n then i get a signal luckily...But if i reboot it the problem comes back again...
My device is not rooted or bootloader unlocked...

Muley4 said:
Hi,
By any chance did you resolve this issue...My OnePlus one is doing same now....when i insert the sim it turns on airplane mode automatically(only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode). This is a weird issue am facing and cant explain properly...Now n then i get a signal luckily...But if i reboot it the problem comes back again...
My device is not rooted or bootloader unlocked...
Click to expand...
Click to collapse
"only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode"
How is this even possible?!

Mr.Ak said:
"only in power button press menu, But the airplane mode doesnt turn in settings-more-airplane mode"
How is this even possible?!
Click to expand...
Click to collapse
Yes its weird...I wouldn't even believe it myself if someone says so...