Database Info

Beats port (WORKING)

As the name says it is beats port for our x 10.
I took libs and other files from other original thread which was in xda news
http://db.tt/wfdrRqCq [xrecovery]
http://db.tt/mRVRhXXy(according to original post it works on any gb rom.)
It really works ;-)
And i hope you have a recently made backup of your rom or if you don't have make a backup before.
And don't forget to hit thanks
Sent from my X10i using xda premium

Can I ask what "beats" is?

Beats is a sound EQ "Beats by dre" that enhances the sound quality as seen in the newer sense 3.5 ports/roms. Only active when headphones are plugged in. When working properly it sounds pretty nice.
Sent from my PG86100 using xda premium

After installing your libs, i can now enable srs in power amp! Nice!
I'm on "X10S" rom, based on Wolfbreak's

There is some problem with your package, i tried to install it via xrec, but it cannot even open the package.....
P.S. im on vcmcs rom

OMG awesome bass!!! It worked on mine,installed threw xrecovery & fixed perm. ;-) hope I won't blast my head away!! Nice
Sent from my flying X10i
Feralabs V10 Adrenaline 2012
Doomkernel v6 UlBl

armaan.ag said:
There is some problem with your package, i tried to install it via xrec, but it cannot even open the package.....
P.S. im on vcmcs rom
Click to expand...
Click to collapse
It is working.
Sent from my X10i using xda premium

Using Cobrato's MIUI 2.30 with DSP Manager. Didn't notice any difference on my Creative EP-630 earplugs after flashing. Will it work *only* with Beats headphones?

can this be flashed with cwm too?
and can it be turned off?
Sent from my X10i using XDA App

bbsrailfan said:
Using Cobrato's MIUI 2.30 with DSP Manager. Didn't notice any difference on my Creative EP-630 earplugs after flashing. Will it work *only* with Beats headphones?
Click to expand...
Click to collapse
You have to ask if it will only work on stock firmware.

sjondenon said:
can this be flashed with cwm too?
and can it be turned off?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
No it can not be flashed via cwm.
If you could upload an epmty flashable zip file ,then i would upload it for cwm.
Sent from my X10i using xda premium

bbsrailfan said:
Using Cobrato's MIUI 2.30 with DSP Manager. Didn't notice any difference on my Creative EP-630 earplugs after flashing. Will it work *only* with Beats headphones?
Click to expand...
Click to collapse
It works well with cm7 and cwm 9, don't know about miui.
Didn't test it on stock, so can't say anything.
And you need very good quality headphones to notice the changes.
Sent from my X10i using xda premium

It doesn't work on wolf's v7b6. The music player force closes. Too bad I really wanted to try it

firehot_aman said:
No it can not be flashed via cwm.
If you could upload an epmty flashable zip file ,then i would upload it for cwm.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
How do I make a flashable zip?

I flashed it with xrecovery, however I didn't notice any change in the sound nor does beats sign shows when I plug in headphones.

I believe there is supposed to be some framework edits and apks that go with the libs. Well, maybe. Im not sure how it is on your device I just know that on ours we need all that plus a kernel with beats support and drivers since the beats sound needs a drive of about 1.2ghz to push it to hear a highly noticable difference. Jyluat trying to help. Beats is a big thing in evo and 3D forums you can probably find more information there

Works on MIUI
firehot_aman said:
It works well with cm7 and cwm 9, don't know about miui.
Didn't test it on stock, so can't say anything.
And you need very good quality headphones to notice the changes.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
It did work! I re-downloaded the zip package and flashed it again and it works now. Not a very drastic change but low-end bass has definitely improved.

its sounds osm man srsly....thanks a lot....voice quality has change in my beats audio earphones.....rocking loved it

http://db.tt/wfdrRqCq
Update
Sent from my X10 using xda premium

firehot_aman said:
http://db.tt/wfdrRqCq
Update
Sent from my X10 using xda premium
Click to expand...
Click to collapse
is it the new update...????what this one includes from the previous one...???

Beats audio? !

Hello im looking for the latest beats audio zip to flash and i cant find the thread was it removed?
Sent from my Nexus S using xda premium

ymcmbforever said:
Hello im looking for the latest beats audio zip to flash and i cant find the thread was it removed?
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Same here
Sent from my MB865 using xda premium

Oh wait i just read it was removed damn
Sent from my Nexus S using xda premium

PM me fellas

hahaha it was already somewhere else on this forum
http://forum.xda-developers.com/showthread.php?t=1525226
Enjoy

how to remove
how can I fully remove this. broke my equalizer. or any way to fix it. stupidly, I have no backup
Sent from my MB865 using XDA

lkrasner said:
how can I fully remove this. broke my equalizer. or any way to fix it. stupidly, I have no backup
Sent from my MB865 using XDA
Click to expand...
Click to collapse
Should have done a backup

ymcmbforever said:
Hello im looking for the latest beats audio zip to flash and i cant find the thread was it removed?
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
I highly recommend you make a backup of your phone by CWM before flashing the Beats/xloud and beware it does crashed the PowerAMP in the 1703 version. Additionally, the poweramp can't identify such plugin even you flashed it. Using software equalizer such as "Equalizer" by Smart XXXXXXX (I think it'd not the ad-time) may be a safer way.

socialx said:
I highly recommend you make a backup of your phone by CWM before flashing the Beats/xloud and beware it does crashed the PowerAMP in the 1703 version. Additionally, the poweramp can't identify such plugin even you flashed it. Using software equalizer such as "Equalizer" by Smart XXXXXXX (I think it'd not the ad-time) may be a safer way.
Click to expand...
Click to collapse
The one distributed 3.2.12 is the only one I'd suggest flashing to our phone. I tried other subsequent releases but with bad results. But 3.2.12 works like a charm, and PowerAmp is my media player of choice.

[Q] ROM Manager

So I've been trying to find why ROM manager should not be used with this device and I just see that I shouldn't. I came from a MyTouch 4G where that or 4EXT were standard.
What symptoms does ROM manager cause?
I've noticed that any ROM I try to flash that doesn't use aroma installer fails at checking the update package. Is this one and how do I avoid it?
Sent from my SGH-T959V using XDA Premium HD app

Rom manager does not support our device so any recovery you flash is going to result in a bricked phone. It's just that simple. Even after installing the correct custom recovery, stay away from it because you won't find any compatible roms either. Not to mention that in order to flash a rom with rom mangler you first have to flash a recovery so it knows which roms to look for.
Sent from my SGH-T959V using xda premium

I have ROM manager on my phone already. Hasn't seemed to brick it yet. I just can't flash ROMs through it unless they are packaged with aroma. But wiping works fine.
Sent from my SGH-T959V using XDA Premium HD app

Chomanator said:
I have ROM manager on my phone already. Hasn't seemed to brick it yet. I just can't flash ROMs through it unless they are packaged with aroma. But wiping works fine.
Sent from my SGH-T959V using XDA Premium HD app
Click to expand...
Click to collapse
How are you using it at all? Doesn't it prompt you to install a recovery?
Sent from my SGH-T959V using xda premium

He will learn.....soon to be a statistic,wanting to know how to unbrick his phone.

I'm more than prepared to fix a brick.
It flashes through the market app fine using the i9000(?) option. I can then reboot into recovery fine and flash/wipe/mount just fine. Though the model mismatch might also be causing the issue where I can't flash anything not packaged with aroma.
Sent from my SGH-T959V using XDA Premium HD app

Chomanator said:
I'm more than prepared to fix a brick.
It flashes through the market app fine using the i9000(?) option. I can then reboot into recovery fine and flash/wipe/mount just fine. Though the model mismatch might also be causing the issue where I can't flash anything not packaged with aroma.
Sent from my SGH-T959V using XDA Premium HD app
Click to expand...
Click to collapse
Your lucky flashing that recovery should have soft bricked your phone. This is not the i9000. That's the galaxy s international version of the phone. Then there's the t959 vibrant. And the t959w for wind Mobile. Which are all slightly different. Like i said really lucky. Sooner or later it's likely to burn you.
Sent from my SGH-T959V using xda premium

I know this isn't the I9000. Perhaps I should consider dusting off my coding knowledge and make a compatible recovery.
This phone is so much different than my old HTC glacier... -_-
Sent from my SGH-T959V using XDA Premium HD app

Chomanator said:
I know this isn't the I9000. Perhaps I should consider dusting off my coding knowledge and make a compatible recovery.
This phone is so much different than my old HTC glacier... -_-
Sent from my SGH-T959V using XDA Premium HD app
Click to expand...
Click to collapse
We have cwm recoveries for the phone they just don't flash thru Rom Manager.
Sent from my SGH-T959V using xda premium

Given that CyanogenMod is dumping ROM Manager, it seems like energy could be better put elsewhere.
One reference (past the code itself) -- http://en.wikinoticia.com/Technolog...od-rom-manager-abandons-its-own-update-system

[MOD] Beats Audio [Updated 1/21/13]

Please Make a Backup First Before Flashing..
I looked around and seen we didn't have a MOD for Beats Audio so i created one for us... Walkman player is included and will be needed to use for the beats audio mod
Flash this through CWM Recovery...
You will need to do a fresh install.. Do not flash over other sound mods or other beats audio mods..
the sound might not work if flash over other sound mods and might make sound worse..
Once installed go to system settings >Sound>Music effects>click BeatZ.
Now go to Walkman Player app and listen to some music. while music is playing. click top menu icon and than sound enhancements.. adjust eq settings.
THIS IS MY NEW MOD THAT WORKS WITH ALL APPS
http://forum.xda-developers.com/showthread.php?t=2111763

Thanks for making this. Ill give it a go and tell you how it went.

Re: [MOD] Beats Audio
Is this different from the beats audio in the market? I've been using that one for awhile with no issues.
Sent from my GT-N8013 using XDA Premium HD app

Re: [MOD] Beats Audio
TexasRules777 said:
Is this different from the beats audio in the market? I've been using that one for awhile with no issues.
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
Not sure.. I never used that one before.. but if that one works just keep using it..
Sent from my GT-N8013 using XDA Premium HD app

Re: [MOD] Beats Audio
Cool..but what is the walkman app you have included? Can you adjust the beats audio settings with it?
Sent from my DROID RAZR using xda app-developers app

Re: [MOD] Beats Audio
TexasRules777 said:
Cool..but what is the walkman app you have included? Can you adjust the beats audio settings with it?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Yes.. Its the sony music player and it design to work with the beats audio eq.. it sounds good compared to the Samsung stock music player..
Sent from my GT-N8013 using XDA Premium HD app

Installed through CWM.. won't even show up !! I have the official JB firmware.. I also tried to install it through copying the files manually from the .zip file to /system and then fix permissions.. this got me into a boot loop... what to do now?

Re: [MOD] Beats Audio
Waseem Manneh said:
Installed through CWM.. won't even show up !! I have the official JB firmware.. I also tried to install it through copying the files manually from the .zip file to /system and then fix permissions.. this got me into a boot loop... what to do now?
Click to expand...
Click to collapse
I will take a look at it once I get home.. do a restore if u have a boot loop.. if no restore u will need to do a fresh install.
Sent from my GT-N8013 using XDA Premium HD app

Update in OP..
Sent from my GT-N8013 using XDA Premium HD app

Waseem Manneh said:
Installed through CWM.. won't even show up !! I have the official JB firmware.. I also tried to install it through copying the files manually from the .zip file to /system and then fix permissions.. this got me into a boot loop... what to do now?
Click to expand...
Click to collapse
Same here, no bootloop but no player.
Sent from my GT-N8013 using XDA Premium HD app

TexasRules777 said:
Same here, no bootloop but no player.
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry i uploaded the wrong file.. doing some last minute tests.. about to upload a Newer version..
This one will work and install with no problems and will need the walkman player to work.. it will be included in the file..

I see people downloading the zip but are not letting others know if its working or not.. Please leave feedback.. Thanks

Working on 8013
Sent from my GT-N8013 using Xparent Purple Tapatalk 2

Working but when adjusting the dsp manager isn't doing anything when the settings are changed.
Sent from my GT-N8013 using XDA Premium HD app

TexasRules777 said:
Working but when adjusting the dsp manager isn't doing anything when the settings are changed.
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
Once installed go to system settings >Sound>Music effects>click BeatZ.

Got it..you have to use the walkman app for it to work. Tried it with amazon and changing the eq had no effect. Used the walkman app and had super bass..sux cuz I have 150 gigs of music so I stream it through amazon. But the walkman app had massive bass man..good work!
Sent from my GT-N8013 using XDA Premium HD app

TexasRules777 said:
Got it..you have to use the walkman app for it to work. Tried it with amazon and changing the eq had no effect. Used the walkman app and had super bass..sux cuz I have 150 gigs of music so I stream it through amazon. But the walkman app had massive bass man..good work!
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
It saids to use walkman player in the OP title.. Im trying to get it to work with every app..
Sent from my GT-N8013 using XDA Premium HD app

Yea I read that but just assumed because dsp manager in cm 10 works on every app this would too..still be using this mod though..thanks for the hard work!
Sent from my GT-N8013 using XDA Premium HD app

THIS MOD WORKS WITH ALL APPS
http://forum.xda-developers.com/showthread.php?t=2111763

Can you make a revert flashable zip? I actually want to install your newer method mod but I do not want to flash it over this. Please and thank you.

Xperia J earphones sound

I have done some kind of research and I haven't found an answer. My question is is there an some kind of file that I can replace to boost my earphone sound without flashing a custom rom?
Sent from my ST26i using xda app-developers app

TheGintazz said:
I have done some kind of research and I haven't found an answer. My question is is there an some kind of file that I can replace to boost my earphone sound without flashing a custom rom?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
try acid audio engine follow the instructions and you should get better and clearer sound from your phone

Thanks, but I dont have CWM and I wanted to ask Is there a specific file in the system, that I could change without flashing anything?
Sent from my ST26i using xda app-developers app

TheGintazz said:
Thanks, but I dont have CWM and I wanted to ask Is there a specific file in the system, that I could change without flashing anything?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
test this apk,its DSPmanager from cyanogenmod but it worked on my miro should help,there are many options,i got much better bass when using earphones .
just download it and use a root file explorer like root browser,you can get it from the market,find it on your sd card and copy it to your system/apps
and change permissions to rw-r--r--
hope this helps

Will try, Thanks!
Sent from my ST26i using xda app-developers app

TheGintazz said:
Will try, Thanks!
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
sorry,forgot to attach the file ,lol :angel:

But what about flash gordon? Would I be able to flas acid audio engine through it?
Sent from my ST26i using xda app-developers app

I tried DSP but it seems like it does nothing Thanks anyway.
Sent from my ST26i using xda app-developers app

TheGintazz said:
I tried DSP but it seems like it does nothing Thanks anyway.
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
you are rooteed right? you should be able to install ac!d or viper 4 android or any other soundmod by using some kind of root browser like Root Explorer or Root Browser just check out the acid audio engine thread (i linked it in my previous thread) they should have instructions on how to install it manually
hope this helped

Yes, I Am rooted and if it really works out I'm going to worship you all night
Sent from my ST26i using xda app-developers app

TheGintazz said:
Yes, I Am rooted and if it really works out I'm going to worship you all night
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
haha :fingers-crossed:

TheGintazz said:
Yes, I Am rooted and if it really works out I'm going to worship you all night
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
did it work?

JxPxK said:
did it work?
Click to expand...
Click to collapse
It kind of worked. I didn't find a way to install acid audio engine manually, but I managed to install Viper 4 android and it dosen't work with walkman so i have to use VLC. But I don't think there's an improvement of loudness. I might be wrong but I really want to try out acid and I just can't find a way