I have a galaxy s3 that started to have some major issues and verizon is sending me a replacement. I had the JB bootloader on there and CM10. I already used ODIN to flash back to the stock kernel and stock software. Do I need to do anything else to ensure I dont get charged like $600
wipe data/ factory reset from stock recovery or *2767*3855# from dialer.
id say to a complete odin restore to stock and see if u can get out of the loop
doesn't hurt to try
It wouldn't hurt to do everything twice, just to be on the safe side. That's what I did
Sent from my SCH-I535 using Tapatalk 2
well i did the odin restore and stuff. as of now it is completely stock. do i need to do anythin to like a flash counter or anything?
dougmod said:
well i did the odin restore and stuff. as of now it is completely stock. do i need to do anythin to like a flash counter or anything?
Click to expand...
Click to collapse
Probably not. I doubt they would check that thoroughly. Make sure to "re-lock" you're bootloader, if you were unlocked. Good luck!
Phalangees said:
Probably not. I doubt they would check that thoroughly. Make sure to "re-lock" you're bootloader, if you were unlocked. Good luck!
Click to expand...
Click to collapse
thanks man. i read that when you odin to the stock kernel and stock rom it also flashes the bootloader. at least that is what a few other threads said
dougmod said:
thanks man. i read that when you odin to the stock kernel and stock rom it also flashes the bootloader. at least that is what a few other threads said
Click to expand...
Click to collapse
Yes it does. If you flash stock then your bootloader is locked
Sent from my SCH-I535 using xda premium
Related
How do I get a SGS4G back to stock for a warranty return?
Odin a stock recovery without root
Or alternatively, go to the vibrant forums and get a vibrant bootloader, it'll brick your phone so it won't start lololol
Sent from my SGH-T959V using XDA App
kmandel said:
How do I get a SGS4G back to stock for a warranty return?
Click to expand...
Click to collapse
Given that KJ6 is an official release from Samsung now, you could use RaverX3X's ODIN ROM to put it to stock. I think (someone correct me if I'm wrong) that it will remove root, CWM, voodoo, and all of that. Speaking of voodoo, if you're using it, remember to go into recovery and disable it before flashing anything else.
tehgyb said:
Or alternatively, go to the vibrant forums and get a vibrant bootloader, it'll brick your phone so it won't start
Click to expand...
Click to collapse
I dont think this would work. Don't they take your phone to check if its hacked for a day or two before giving you another phone?
stephen_w said:
Given that KJ6 is an official release from Samsung now, you could use RaverX3X's ODIN ROM to put it to stock. I think (someone correct me if I'm wrong) that it will remove root, CWM, voodoo, and all of that. Speaking of voodoo, if you're using it, remember to go into recovery and disable it before flashing anything else.
Click to expand...
Click to collapse
Is KJ6 the original? Cause i used ravers KC1 for my phone and it is currently not working.
ktownpop said:
Is KJ6 the original? Cause i used ravers KC1 for my phone and it is currently not working.
Click to expand...
Click to collapse
Yeah, it is. RaverX3X created an ODIN version for those having issues flashing with Kies.
I've already Odin's Ravers KJ6 ROM which caused me to become unrooted. Is there any more to do to get back to "stock" for warranty return? I had CWM recovery installed, what do I need to do to remove that?
kmandel said:
I've already Odin's Ravers KJ6 ROM which caused me to become unrooted. Is there any more to do to get back to "stock" for warranty return? I had CWM recovery installed, what do I need to do to remove that?
Click to expand...
Click to collapse
I believe CWM should already be gone once you flashed Raver's KJ6. Other than doing a factory data reset to get rid of anything on there you don't want them to see, I think you're good to go.
If I wanted to go back to my stock rom for warranty purposes, do I just download the original from samsung-update
Put the .zip into my SD card. And use CWM to install it?
Plus, if I put the original ROM back onto my phone, will the "Custom" bootloader appear or will it be normal?
And how would I get rid of CWM? Just delete recovery.img?
The file you'll download is going to be a file that you need to flash with Odin, once flash it puts everything back the way it was. No you won't get the custom when flashing back to stock since you'll be using an official signed rom. You should, however, might want to make sure you don't have a counter going for the number of unsigned rom flashes.
Sent from my SCH-I535
scsa20 said:
The file you'll download is going to be a file that you need to flash with Odin, once flash it puts everything back the way it was. No you won't get the custom when flashing back to stock since you'll be using an official signed rom. You should, however, might want to make sure you don't have a counter going for the number of unsigned rom flashes.
Sent from my SCH-I535
Click to expand...
Click to collapse
What's a counter?
Do I delete everything by with CWM and then use odin to flash my GS3?
Or do I just use odin over my custom rom?
emckai said:
What's a counter?
Do I delete everything by with CWM and then use odin to flash my GS3?
Or do I just use odin over my custom rom?
Click to expand...
Click to collapse
Prior to using odin to flash the stock image, be sure to use EZ-Recovery for VZW Galaxy S3 to flash the stock recovery.
Click link in sig...your questions are answered there.
Droidstyle posted a great step by step on how to go back stock, in the developers section of this forum
Sent from my Verizon Samsung GSIII xda developers-app
droidstyle said:
Click link in sig...your questions are answered there.
Click to expand...
Click to collapse
Ohhh, thank you very much. I'll be using that!
chip594 said:
Droidstyle posted a great step by step on how to go back stock, in the developers section of this forum
Sent from my Verizon Samsung GSIII xda developers-app
Click to expand...
Click to collapse
Thanks!
PJnc284 said:
Prior to using odin to flash the stock image, be sure to use EZ-Recovery for VZW Galaxy S3 to flash the stock recovery.
Click to expand...
Click to collapse
Is that necessary? I odin'ed using the stock image and my custom recovery is gone, so was the unlocked keypad.
simollie said:
Is that necessary? I odin'ed using the stock image and my custom recovery is gone, so was the unlocked keypad.
Click to expand...
Click to collapse
I had a kexec recovery installed and flashed back to stock a couple nights ago and completely lost recovery. Luckily it booted into the rom and I was planning to re-root anyway using the simple root to make sure I didn't have any Sprint stuff like the initial root method.
I discovered a scratch on my screen and need to get this replaced. Right now I'm on Verizon running Android open Kang project jb with an unlocked bootloader.
I want to return my phone to barebones stock do i just flash the stock zip in odin and the bootloader and I would be good to go?
Also if I get this replacement in there different baseband version does this not allow me to Install aokp or other roms
Sent from my SCH-I535 using Tapatalk 2
austin1227 said:
I discovered a scratch on my screen and need to get this replaced. Right now I'm on Verizon running Android open Kang project jb with an unlocked bootloader.
I want to return my phone to barebones stock do i just flash the stock zip in odin and the bootloader and I would be good to go?
Also if I get this replacement in there different baseband version does this not allow me to Install aokp or other roms
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yes, just Odin stock G1 or F2 image, the do a factory reset, clear all data cache, you should be fine. Your replacement should be a G1 version and you can install any rom over it.
buhohitr said:
Yes, just Odin stock G1 or F2 image, the do a factory reset, clear all data cache, you should be fine. Your replacement should be a G1 version and you can install any rom over it.
Click to expand...
Click to collapse
Thanks. Side question if it was other version would it not be able to install ROMs?
Sent from my SCH-I535 using Tapatalk 2
Dont forget to re-lock the bootloader. Odin doesn't do it for you. Read the sticky about "how to return your phone back to verizon" in this very forum
Nope, you can install custom rom to any version.
Sent from my SCH-I510 using Tapatalk 2
Brian Gove said:
Dont forget to re-lock the bootloader. Odin doesn't do it for you. Read the sticky about "how to return your phone back to verizon" in this very forum
Click to expand...
Click to collapse
what do you mean odin dont relock the bootloader? if you flash ths stock kernel, then flash a stock rom, the bootloader is locked...i thought we already had this convo?
droidstyle said:
what do you mean odin dont relock the bootloader? if you flash ths stock kernel, then flash a stock rom, the bootloader is locked...i thought we already had this convo?
Click to expand...
Click to collapse
We did, but I actually went thru the process and it doesn't lock the bootloader using Odin.
And if for any reason your bootloader STILL isn't re-locked, you can simply use EZ-Unlock (the app) to do so.
Brian Gove said:
We did, but I actually went thru the process and it doesn't lock the bootloader using Odin.
Click to expand...
Click to collapse
and how did you verify this?
droidstyle said:
and how did you verify this?
Click to expand...
Click to collapse
Refer to our discussion in this thread.
Quick question, searched the threads but might have missed it.
I am restoring a nandroid of the stock rooted rom, coming from CM10/PA, once restored back to stock from my nandroid, can I re-lock the bootloader? or should I just odin back?
Thanks,
Forgot to add that I also flashed the stock recovery through ez recovery.
gio2005 said:
Quick question, searched the threads but might have missed it.
I am restoring a nandroid of the stock rooted rom, coming from CM10/PA, once restored back to stock from my nandroid, can I re-lock the bootloader? or should I just odin back?
Thanks,
Forgot to add that I also flashed the stock recovery through ez recovery.
Click to expand...
Click to collapse
why do you need to relock your bootloader if your flashing back to stock rooted?
Yea if you flash a stock image, your bootloader will be flashed as well, and be back to the stock secure aboot.
apacseven said:
Yea if you flash a stock image, your bootloader will be flashed as well, and be back to the stock secure aboot.
Click to expand...
Click to collapse
only for VRLAHD....all other stock odin images are not packaged with the stock aboot.img...so you need to manually lock the bootloader.
droidstyle said:
only for VRLAHD....all other stock odin images are not packaged with the stock aboot.img...so you need to manually lock the bootloader.
Click to expand...
Click to collapse
What he said. But why would you want to go back to stock rooted and go thru the extra effort of changing the recovery and locking the bootloader? Usually you only need to do that if you're trying to hide it from Verizon but being rooted they can still tell...
droidstyle said:
only for VRLAHD....all other stock odin images are not packaged with the stock aboot.img...so you need to manually lock the bootloader.
Click to expand...
Click to collapse
Noted, thanks for clarifying.
Thanks for the responses, I restored my stock rooted nandroid, was just wondering about the relocking the bootloader in case of an update (didn't feel like losing data with Odin).
Sent from my SCH-I535 using xda premium
Brian Gove said:
What he said. But why would you want to go back to stock rooted and go thru the extra effort of changing the recovery and locking the bootloader? Usually you only need to do that if you're trying to hide it from Verizon but being rooted they can still tell...
Click to expand...
Click to collapse
How can they tell
Sent from my SCH-I535 using Tapatalk 2
AJ26T said:
How can they tell
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Because in your app drawer there will be the telltale superuser app.
Brian Gove said:
Because in your app drawer there will be the telltale superuser app.
Click to expand...
Click to collapse
Not if u remove it
Sent from my SCH-I535 using Tapatalk 2
AJ26T said:
Not if u remove it
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
then you won't have root...
Hello my friends, I would like to make sure I am clear on how to return the 1727 to stock in order to return to ATT for service.
My understanding thus far is that I must do the following:
1. Return to stock firmware using ODIN
2. Reset the flash counter
How do I delete the traces of CWM recovery, and also ODIN itself? Is it possible to make the phone look entirely 'unrooted' for ATT to fix and/or service?
Thanks!
Flash the stock rom with odin. It'll replace cwm with the stock recovery. You can use triangle away to reset the flash counter. Do that after returning to stock.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
otacon507 said:
Hello my friends, I would like to make sure I am clear on how to return the 1727 to stock in order to return to ATT for service.
My understanding thus far is that I must do the following:
1. Return to stock firmware using ODIN
2. Reset the flash counter
How do I delete the traces of CWM recovery, and also ODIN itself? Is it possible to make the phone look entirely 'unrooted' for ATT to fix and/or service?
Thanks!
Click to expand...
Click to collapse
Hello friend! Read the stickies and previous threads asking the same question.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
xcrazydx said:
Hello friend! Read the stickies and previous threads asking the same question.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
did not see anything about the flash counter in the stickies, or any details about what happens to the custom recovery after ODIN restores to stock, thats why I made this post!
jd1639 said:
Flash the stock rom with odin. It'll replace cwm with the stock recovery. You can use triangle away to reset the flash counter. Do that after returning to stock.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Are you sure triangle away will work with the 1727? Its not on the list of supported devices
otacon507 said:
did not see anything about the flash counter in the stickies, or any details about what happens to the custom recovery after ODIN restores to stock, thats why I made this post!
Click to expand...
Click to collapse
A stock tar restores stock 3e recovery. If you're counter had not been incremented, and it probably hasn't, you don't need triangle away. We also have a "counter reset" that you can flash if you have increased your counter. So, no need for triangle away anyways.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
xcrazydx said:
A stock tar restores stock 3e recovery. If you're counter had not been incremented, and it probably hasn't, you don't need triangle away. We also have a "counter reset" that you can flash if you have increased your counter. So, no need for triangle away anyways.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks crazy, Im not getting a triangle but my counter is definitely incremented from flashing cfw through odin. Looks like I'll be squared away soon, my thanks again! Much appreciated!
otacon507 said:
Thanks crazy, Im not getting a triangle but my counter is definitely incremented from flashing cfw through odin. Looks like I'll be squared away soon, my thanks again! Much appreciated!
Click to expand...
Click to collapse
What is cfw? And did you actually check the counter?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
xcrazydx said:
What is cfw? And did you actually check the counter?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
unofficial firmware. and I checked the counter in ODIN after using the flash reset and it is back to 'NO'. I am assuming flashing a stock firmware using a recovery tar will no retrip the counter, so i am good? Thank you !
otacon507 said:
unofficial firmware. and I checked the counter in ODIN after using the flash reset and it is back to 'NO'. I am assuming flashing a stock firmware using a recovery tar will no retrip the counter, so i am good? Thank you !
Click to expand...
Click to collapse
Using the official tar from sammobile will not trip the counter. You are good.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
the only way you could of tripped the counter was by flashing koanes tar rom from way back in the i727 early development or similiar modded roms which there are none that tripped the counter in the past 12months or more. if you did trip the counter there is a reset fix in the 1stop sticky, triangle away wont work for our devices
to return to att just use odin to return to stock as it will replace everything you flashed and be completely stock, just follow the guides
Do you have to use Odin or will one of the cwm flashable stock JB Roms by Mohan + factory reset suffice?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jondroid2 said:
Do you have to use Odin or will one of the cwm flashable stock JB Roms by Mohan + factory reset suffice?
Click to expand...
Click to collapse
I suppose you could do flashable zips but you still have to return to the stock recovery. I'm pretty sure there is a flashable stock recovery around somewhere.
Does it matter if the stock recovery is listed as an ICS stock recovery or will it work for JB also?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jondroid2 said:
Does it matter if the stock recovery is listed as an ICS stock recovery or will it work for JB also?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
It won't matter if it's ics or jb since there both officially released by att. You can find the stock firmware at sammobile.com. They're zip files and you'll need to extract the .tar.md5 file from them to use in odin. Use 7-zip to extract.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app