Haipai X710D MTk6577 MicoSD 32GB - Android General

Has anyone been able to get a 32GB SD card to work? I have tried to different ones;
ScanDisk 32GB 2x -> Doesn't work at all, see it but when I tell it to format the card it says its formating but never completes. The card works ok when I test it in my nokia N8, and PC.
ScanDisk 32GB 4x -> See it, I can format it, but unable to write or read from it. The card works ok when I test it in my nokia N8, and PC.
ScanDisk 16GB 2x -> See it, I can format it, works correctly reading and writing.
ScanDisk 2GB 2x -> See it, I can format it, works correctly reading and writing.
Android version 4.0.9, kernel version 3.0.13 July 9 2012, Build number E1809C_V77_Lx529_X710D2_20120709
I hope its just a firmware problem, that can be fixed with an update?

brotherman38 said:
Has anyone been able to get a 32GB SD card to work? I have tried to different ones;
ScanDisk 32GB 2x -> Doesn't work at all, see it but when I tell it to format the card it says its formating but never completes. The card works ok when I test it in my nokia N8, and PC.
ScanDisk 32GB 4x -> See it, I can format it, but unable to write or read from it. The card works ok when I test it in my nokia N8, and PC.
ScanDisk 16GB 2x -> See it, I can format it, works correctly reading and writing.
ScanDisk 2GB 2x -> See it, I can format it, works correctly reading and writing.
Android version 4.0.9, kernel version 3.0.13 July 9 2012, Build number E1809C_V77_Lx529_X710D2_20120709
I hope its just a firmware problem, that can be fixed with an update?
Click to expand...
Click to collapse
The firmware from July 13, 2012 fixes this problem, my SD cards work correctly now!

brotherman38 said:
The firmware from July 13, 2012 fixes this problem, my SD cards work correctly now!
Click to expand...
Click to collapse
Hello
Can you suggest me where you have found this upgrade firmware?

I just sent you a PM with a link for the firmware and flash tool, i'm not allowed to post links yet.
maverjk said:
Hello
Can you suggest me where you have found this upgrade firmware?
Click to expand...
Click to collapse

brotherman38 said:
I just sent you a PM with a link for the firmware and flash tool, i'm not allowed to post links yet.
Click to expand...
Click to collapse
Thanks for your link.
There isn't something like an official website for mtk6577 device?
thanks in advantage

maverjk said:
Thanks for your link.
There isn't something like an official website for mtk6577 device?
thanks in advantage
Click to expand...
Click to collapse
If there is I haven't found it yet. I wish I knew who builds it.

Update Links?
brotherman38 said:
If there is I haven't found it yet. I wish I knew who builds it.
Click to expand...
Click to collapse
Might you please PM me with the links as well?
I just purchased one of these X710Ds (hasn't arrived yet) and been distressed to read about the SD card problem. (Hoping mine may have updated firmware onboard, but I guess we'll see...)
Many thanks in advance

Haipai X710D MTk6577 MicoSD 32GB
Android version 4.0.9, kernel version 3.0.13 July 9 2012, Build number E1809C_V77_Lx529_X710D2_20120709
No read the SD card
ScanDisk 32GB
ScanDisk 16GB
ScanDisk 1GB
How to find firmware and flash tool?
Thanks in advance.

Related

[Q] Problem with Sandisk ultra 64gb sdxc card

I tried this card before and the unit didnt seem to find it, it just showed at the bottom saying can be removed, but when i went to storage it wasn't there.
i put the card in my laptop and used guiformat to format it as fat32 but it shows as 29gb and not 64. the packaging says 64gb, am i missing something or do i have a wrong card in my packaging?
james
Look at the card to see if its a 32gb or 64gb. Use a laptop/pc and reformat it using exfat and see how much memory is available. I had that same problem when I I inserted in the
note, I did use EaseUS Partition Master to format to FAT32 and worked fine. Then I manually updated my firmware on the note N8013 and I was able to format through the note and back to exFAT.
It said 64gb on the card and the packaging, i have sent it back to amazon for an exchange, i had also formatted the card with guiformat as fat32 and it still showed as 29gb free. even after formatting it as fat32 my note 10.1 still wouldn't see it
Have you tried formatting fat32 using a different software such as the one I mentioned on my previous post? What 10.1 note do you own and it's build number?
Sent from my GT-N8013 using xda premium
i own the n8010
Im not familiar on which is the latest update on the N8010, but you should post your build and maybe someone can help if it needs an update or do a search here on the forum. The only thing I can help with is eliminating if your sdcard is defective, but since you already returned its hard test it now.
my build is: IMM76D.N8010XXALGC
I have the exact same problem on my spanking new note 10.1 32gb N8013 (UEALGB) model with 64gb sdxc sandisk card. Can you share more info about the manual update you did?
I had this problem on an 8000... I don't know why but the note seems to partition exfat cards to a FAT32 32gb partition and an unformatted partition. It destroyed my new 64gb sd card as NOTHING would recover it....
Had to get a new card....
I got the SanDisk ultra 64gb sdxc and used it with my s3. I just put the card in my new N8000 and so far everything is working great.
Sent from my GT-I9300 using xda premium
i have the same problem, when i insert the card on the phone it say blank card
when i insert it on the PC it read it EXFAT format
when i copy my data and put it back to the Note the card is read only where i cannot edit at all or add files or add new folder even\
Any idea??
steps to get 64gb working
can anybody please provide a step by step guideline including tools how to get a new 64gb card working??
thx
xX_Nexus_Xx said:
can anybody please provide a step by step guideline including tools how to get a new 64gb card working??
thx
Click to expand...
Click to collapse
The two tools I have used and found most effective are SD Formatter here and EASUS Partition here.. Both freebies and both very intuitive to use.
Also the latest update allegedly resolves some issues with 64GB uSD cards.
HTH
Quote -Also the latest update allegedly resolves some issues with 64GB uSD cards.
Correct. Latest update does handle the 64Gb cards much better. I was on the same firmware as previously mentioned i .e. XXALGC and when I inserted the card I couldn't do anything with it. So I downloaded the latest firmware for the GT-N8000 off Sammobile - The september German version as it said it includes UK, flashed it through odin and that was it . Card worked perfectly didnt have to do anything to it. I did format it through the settings > storage menu anyway to be safe and all was good.
Also, the update gave me newer versions of snote and polaris which helped cure a few little gripes too , so all good !:fingers-crossed:
spikeee69 said:
Quote -Also the latest update allegedly resolves some issues with 64GB uSD cards.
Correct. Latest update does handle the 64Gb cards much better. I was on the same firmware as previously mentioned i .e. XXALGC and when I inserted the card I couldn't do anything with it. So I downloaded the latest firmware for the GT-N8000 off Sammobile - The september German version as it said it includes UK, flashed it through odin and that was it . Card worked perfectly didnt have to do anything to it. I did format it through the settings > storage menu anyway to be safe and all was good.
Also, the update gave me newer versions of snote and polaris which helped cure a few little gripes too , so all good !:fingers-crossed:
Click to expand...
Click to collapse
Is that the 8000 or 8010 i've a UK version WiFi and need 64gb Card support why it doesn't work out of the box I don't know
Sent from my GT-I9300 using xda premium
mancuk29 said:
Is that the 8000 or 8010 i've a UK version WiFi and need 64gb Card support why it doesn't work out of the box I don't know
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Same here UK 16gb 8010 WiFi only
It needs the updated firmware to work properly but as there ain't a later one just for the UK I went with the German one. No issues so far and yes I have a keyboard dock too
skeeterpro said:
The two tools I have used and found most effective are SD Formatter here and EASUS Partition here.. Both freebies and both very intuitive to use.
Also the latest update allegedly resolves some issues with 64GB uSD cards.
HTH
Click to expand...
Click to collapse
Neither of the two does exfat?

micro SD: which size and format?

So will 64GB exEF cards work with the note 10.1?
Or or the safe side i should go for a 32GB? And still, FAT32 or exEF?
thanks
Yes, the 64GB MicroSD Cards Will work
Sent from my GT-N8000 using XDA Premium HD app
Yep, 64gb MicroSD exFat works Just got mine today
Had mine for last mine or two. Works fine, however, just make sure you are running the latest rom or it could kill your sd card... The earlier versions of stock firmware didn't have exFAT support and only formatted up to 32gb on the 64gb card. Some people were lucky enough to be able to recover this however there are a few who lost their card because of this... And a bricked 64gb sd card is an expensive thing to have....
Using Easius partition manager you should be able to format to FAT32 though if you wish and that will work no problem whatsoever...
ultramag69 said:
Had mine for last mine or two. Works fine, however, just make sure you are running the latest rom or it could kill your sd card... The earlier versions of stock firmware didn't have exFAT support and only formatted up to 32gb on the 64gb card. Some people were lucky enough to be able to recover this however there are a few who lost their card because of this... And a bricked 64gb sd card is an expensive thing to have....
Using Easius partition manager you should be able to format to FAT32 though if you wish and that will work no problem whatsoever...
Click to expand...
Click to collapse
my firmware is from August 2012
> Italy - 2012 August - 4.0.4 - N8000XWALH1 - N8000ITVALH3
how do i know if it supports 64GB exFAT?
I'm using an 64gb sandisk ultra class 10, but here in Brazil still dont had any firmware update, so I formated in FAT32 and its ok!
thegios said:
my firmware is from August 2012
> Italy - 2012 August - 4.0.4 - N8000XWALH1 - N8000ITVALH3
how do i know if it supports 64GB exFAT?
Click to expand...
Click to collapse
I'm not sure, but I have 4.0.4 as well, but everywhere I'm reading says that the 4.0.4 update was available in October 2012. Not sure why you got it in August though. But yea, apparently the 4.0.4 update has exFat support, so it should be fine. I'd go on your Note to see if there are any software updates just in case.

[Q] Help with GL to SD on CyanogenMod

I've been using GL to SD on my Samsung Galaxy Tab 2 GT-P3113 for a long time.
It had been a long time since I flashed any ROM on this tablet and decided to place something new on it.
I used CyanogenMod ROM Version: 10.1.3-p3110 Android version: 4.2.2 Build date Sept 23, 2013 since it was the latest stable version.
My problem is that GL to SD will not mount.
I was wondering if anyone else is running that build and having the same issue?
Not sure if it was an update to GL to SD, which happened shortly after I flashed, or the ROM itself causing the problem.
elgecko said:
I've been using GL to SD on my Samsung Galaxy Tab 2 GT-P3113 for a long time.
It had been a long time since I flashed any ROM on this tablet and decided to place something new on it.
I used CyanogenMod ROM Version: 10.1.3-p3110 Android version: 4.2.2 Build date Sept 23, 2013 since it was the latest stable version.
My problem is that GL to SD will not mount.
I was wondering if anyone else is running that build and having the same issue?
Not sure if it was an update to GL to SD, which happened shortly after I flashed, or the ROM itself causing the problem.
Click to expand...
Click to collapse
its workin fine for me i dont think its an app issue..
Did you set the Root access to apps and adb on the new rom?
hcfte said:
Did you set the Root access to apps and adb on the new rom?
Click to expand...
Click to collapse
I never had to set anything before, but never used CyanogenMod on my tablet yet.
I did find under the Superuser Access a setting for apps and adb. I set it to that but still I get a mounting timeout.
Log all show superuser giving access to the app.
I tried clearing data and cache in app / uninstalling - re-installing / CWM - wipe cache and dalvik cache.
Something I noticed looking at my phone vs the tablet; the phones path is storage/external_SD. The tablets path /data/sdext2.
I did upgrade from a class 10 16gb card to a class 10 32gb card....
elgecko said:
I've been using GL to SD on my Samsung Galaxy Tab 2 GT-P3113 for a long time.
It had been a long time since I flashed any ROM on this tablet and decided to place something new on it.
I used CyanogenMod ROM Version: 10.1.3-p3110 Android version: 4.2.2 Build date Sept 23, 2013 since it was the latest stable version.
My problem is that GL to SD will not mount.
I was wondering if anyone else is running that build and having the same issue?
Not sure if it was an update to GL to SD, which happened shortly after I flashed, or the ROM itself causing the problem.
Click to expand...
Click to collapse
If you flash new firmware,you need to clear the data of GL to SD in settings.
tnslf2k said:
If you flash new firmware,you need to clear the data of GL to SD in settings.
Click to expand...
Click to collapse
My post #4 I stated that I tried that.
I placed the old 16gb card in the tablet and GL to SD mounts without any issues.
Pulled my class 4 32gb card from my phone and GL to SD times out as well.
Before I purchased the 32gb card I checked Samsungs site and it says it is supported...just double checked and it states 32 gb.
Not sure why GL to Sd will not mount when using the 32gb card.
Are others using a 32gb card without issue?
Mines a Sandisk.
I also have this problem,my device only sees my 16 gb card (class4) and other old cards used before rooting (maybe coincidence ) in aroma and recovery . No idea what it is....
Sent from my GT-P3100 using XDA Premium 4 mobile app
Resolved!
I got it figured out.
I flashed a different ROM and decided to format my 16gb card and start totally fresh. The 16gb card did not mount and timed out.
That lead me to believe that MiniTool Partition version 8 that I recently upgraded to is causing the problems. So I installed the older version I have and low and behold GL to SD can now mount the 32gb card now.
I guess something changed in the MiniTool Partition version 8 that Android does not like.
Thanks for those that tried to help.

Problem using a Samsung 64gb sd card.

I just bought a Samsung GB sdcard, and I've reformatted it into FAT32. My butterfly can read it with no problem. I have problem after I copied my old files into this new card and put it into my X920d. On my computer, everything has been copied and the total usage is just the same. But when I put it into my phone, some files just missing, and you can see the space(usage) getting less, files lost. Any comment??
Only 32GB is supported here!
bluheart said:
Only 32GB is supported here!
Click to expand...
Click to collapse
I'm running under 4.2.2 now and it's a BoA 5.2 custom rom. But I've tried it on my old galaxy s (CRom 7.0 ) it is OK, nothing lost....is it possible because of the hardware or rom? But the feedback from other BoA rom user, seems 64gb is ok for them.
bluheart said:
Only 32GB is supported here!
Click to expand...
Click to collapse
I'm using Sandisk Ultra 64GB Class 10/UHS, and it works flawlessly

64 GB SD card?

Will our phone support a 64Gb card, has any one tried it?
YPG70 said:
Will our phone support a 64Gb card, has any one tried it?
Click to expand...
Click to collapse
i don't think it will support because the official site says up to 32 GB

Categories

Resources