Related
I tried this card before and the unit didnt seem to find it, it just showed at the bottom saying can be removed, but when i went to storage it wasn't there.
i put the card in my laptop and used guiformat to format it as fat32 but it shows as 29gb and not 64. the packaging says 64gb, am i missing something or do i have a wrong card in my packaging?
james
Look at the card to see if its a 32gb or 64gb. Use a laptop/pc and reformat it using exfat and see how much memory is available. I had that same problem when I I inserted in the
note, I did use EaseUS Partition Master to format to FAT32 and worked fine. Then I manually updated my firmware on the note N8013 and I was able to format through the note and back to exFAT.
It said 64gb on the card and the packaging, i have sent it back to amazon for an exchange, i had also formatted the card with guiformat as fat32 and it still showed as 29gb free. even after formatting it as fat32 my note 10.1 still wouldn't see it
Have you tried formatting fat32 using a different software such as the one I mentioned on my previous post? What 10.1 note do you own and it's build number?
Sent from my GT-N8013 using xda premium
i own the n8010
Im not familiar on which is the latest update on the N8010, but you should post your build and maybe someone can help if it needs an update or do a search here on the forum. The only thing I can help with is eliminating if your sdcard is defective, but since you already returned its hard test it now.
my build is: IMM76D.N8010XXALGC
I have the exact same problem on my spanking new note 10.1 32gb N8013 (UEALGB) model with 64gb sdxc sandisk card. Can you share more info about the manual update you did?
I had this problem on an 8000... I don't know why but the note seems to partition exfat cards to a FAT32 32gb partition and an unformatted partition. It destroyed my new 64gb sd card as NOTHING would recover it....
Had to get a new card....
I got the SanDisk ultra 64gb sdxc and used it with my s3. I just put the card in my new N8000 and so far everything is working great.
Sent from my GT-I9300 using xda premium
i have the same problem, when i insert the card on the phone it say blank card
when i insert it on the PC it read it EXFAT format
when i copy my data and put it back to the Note the card is read only where i cannot edit at all or add files or add new folder even\
Any idea??
steps to get 64gb working
can anybody please provide a step by step guideline including tools how to get a new 64gb card working??
thx
xX_Nexus_Xx said:
can anybody please provide a step by step guideline including tools how to get a new 64gb card working??
thx
Click to expand...
Click to collapse
The two tools I have used and found most effective are SD Formatter here and EASUS Partition here.. Both freebies and both very intuitive to use.
Also the latest update allegedly resolves some issues with 64GB uSD cards.
HTH
Quote -Also the latest update allegedly resolves some issues with 64GB uSD cards.
Correct. Latest update does handle the 64Gb cards much better. I was on the same firmware as previously mentioned i .e. XXALGC and when I inserted the card I couldn't do anything with it. So I downloaded the latest firmware for the GT-N8000 off Sammobile - The september German version as it said it includes UK, flashed it through odin and that was it . Card worked perfectly didnt have to do anything to it. I did format it through the settings > storage menu anyway to be safe and all was good.
Also, the update gave me newer versions of snote and polaris which helped cure a few little gripes too , so all good !:fingers-crossed:
spikeee69 said:
Quote -Also the latest update allegedly resolves some issues with 64GB uSD cards.
Correct. Latest update does handle the 64Gb cards much better. I was on the same firmware as previously mentioned i .e. XXALGC and when I inserted the card I couldn't do anything with it. So I downloaded the latest firmware for the GT-N8000 off Sammobile - The september German version as it said it includes UK, flashed it through odin and that was it . Card worked perfectly didnt have to do anything to it. I did format it through the settings > storage menu anyway to be safe and all was good.
Also, the update gave me newer versions of snote and polaris which helped cure a few little gripes too , so all good !:fingers-crossed:
Click to expand...
Click to collapse
Is that the 8000 or 8010 i've a UK version WiFi and need 64gb Card support why it doesn't work out of the box I don't know
Sent from my GT-I9300 using xda premium
mancuk29 said:
Is that the 8000 or 8010 i've a UK version WiFi and need 64gb Card support why it doesn't work out of the box I don't know
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Same here UK 16gb 8010 WiFi only
It needs the updated firmware to work properly but as there ain't a later one just for the UK I went with the German one. No issues so far and yes I have a keyboard dock too
skeeterpro said:
The two tools I have used and found most effective are SD Formatter here and EASUS Partition here.. Both freebies and both very intuitive to use.
Also the latest update allegedly resolves some issues with 64GB uSD cards.
HTH
Click to expand...
Click to collapse
Neither of the two does exfat?
Title self explanatory..
32gb is enough for that normal phone
Yeah man, not sure about a 64 but my 32 class 4 runs smooth on the A2...and I've had it in about 2 other devices...
Sent From My Motorola Atrix 2/MB865 Running SwiftyTrix v1.3. (OTA ICS 4.0.4)
Just out of curiousity..anyone got one in their ATRIX 2s??
may b wrong section !!
shouldn't this be in "accessories" section ??
I can't even get my Sandisk 32gb class 4 to work with my Atrix 2. I couldn't imagine a 64gb working with it.
Maribou said:
I can't even get my Sandisk 32gb class 4 to work with my Atrix 2. I couldn't imagine a 64gb working with it.
Click to expand...
Click to collapse
Rally?? ATM I am using my 32 GB c10 uhs1 card. Its running fine. Nol issues!
NHS2008 said:
Rally?? ATM I am using my 32 GB c10 uhs1 card. Its running fine. Nol issues!
Click to expand...
Click to collapse
Yeah, I have had nothing but problems with it. If I go into mass storage mode it get corrupted within a few minutes of me transferring files over. So i decided to use a sd adapter and just transfer that way. It worked, but after about an hour it says I have inserted a blank SD card and it wants me to format it. Then when I format it, it never mounts. I have to reboot to get it to mount again. Maybe a faulty card. I dunno.
NHS2008 said:
Rally?? ATM I am using my 32 GB c10 uhs1 card. Its running fine. Nol issues!
Click to expand...
Click to collapse
Yeah, I too am running 32 GB Class 10 Samsung MMC. No problems till now!
I've been running smoothly with a SanDisk 64GB SDXC for years.
I have tried using ES file explorer, the Asus file manager, and FX file explorer. I get a copy failed message every time I try to copy a file to the removable SD card.
Anyone else have this issue?
You can't know your limits until you exceed them.
duckredbeard said:
I have tried using ES file explorer, the Asus file manager, and FX file explorer. I get a copy failed message every time I try to copy a file to the removable SD card.
Anyone else have this issue?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
Have you tried to reformat the card with fat32?
I just did. Seems I'm only having issues with the 32 GB size cards. Acting like they are read only. Can't find such a setting anywhere. Is there another format that should work?
You can't know your limits until you exceed them.
duckredbeard said:
I just did. Seems I'm only having issues with the 32 GB size cards. Acting like they are read only. Can't find such a setting anywhere. Is there another format that should work?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
Have you tried with the latest kernel (JB version .25) and what make and model of your sdcard? just wonder if compability issue and are we talking about Micro sdcard or full size sdcard? On the full size there is a little switch on the side to block writting to the card.
I'm only having issues when I'm using the tablet to copy files. I'm on CleanROM Inheritance. I don't recall if I had this issue with the stock rom. Sometime tonight I will make a backup of my current and then flash to stock rom. Since I'm talking about the removable SD card, it could only be the micro SD that is installed in the tablet. There is no switch on that card.
Sent from my HTC PH39100 using xda app-developers app
I think flashing the _that nodpi kernel should resolved your issue, give it a try.
Sent from my ASUS Transformer Pad TF700T using xda premium
Link to said kernel?
You can't know your limits until you exceed them.
duckredbeard said:
Link to said kernel?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
download this http://d-h.st/M6j then flash with twrp, during the install pick _that_nodpi_stock kernel.
That did it. Did it replace the overclock kernal I selected when I flashed CROMI 3.2?
Sent from my HTC PH39100 using xda app-developers app
duckredbeard said:
That did it. Did it replace the overclock kernal I selected when I flashed CROMI 3.2?
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Yes, it replaced what ever kernel you selected during cleanrom installation. Since it stock kernel, you can no longer Overclock.
Is there another kernel that can be the fix and still give us over clock?
You can't know your limits until you exceed them.
duckredbeard said:
Is there another kernel that can be the fix and still give us over clock?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
Sorry but nope, I believe as soon as Asus release source code, _that is going to make an OC version for this and it's going to be awsome. For now we just have to wait.
Similar Problem With A Samsung Micro SD Card
duckredbeard said:
That did it. Did it replace the overclock kernal I selected when I flashed CROMI 3.2?
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Hi.
I'm having a problem with my Samsung Micro SDXC I (Class 10) card. I've been messing abut with it for days now, formatting, re-formatting in exFAT, FAT32, NTFS but the problem persists; whenever I try to copy data across to the card, the first time the card is inserted, it starts to copy, sometimes even up to 1.5Gb of data but often much less, but then gives me a 'Write Error' or 'I/O Error' message & stops working. Sometimes it also deletes other data on the card when the error occurs. then, until I unmount the card again, it barely functions at all!
A big factor in buyinh this tablet, unlocking, then rooting it was so that I'd have an awesome, small, tablet that had loads of storage & could be transported around very easily. If I can't get the cards to work with it, that's a big part of it's usefulness to me down the drain.
I tried to download the kernal that was mentioned above the message of yours that I'm replying to but the file has been moved. Do you still have it?.......or know how I can resolve my problem without it?
Any help would be much appreciated.
Thanks.
dan5001 said:
Hi.
I'm having a problem with my Samsung Micro SDXC I (Class 10) card. I've been messing abut with it for days now, formatting, re-formatting in exFAT, FAT32, NTFS but the problem persists; whenever I try to copy data across to the card, the first time the card is inserted, it starts to copy, sometimes even up to 1.5Gb of data but often much less, but then gives me a 'Write Error' or 'I/O Error' message & stops working. Sometimes it also deletes other data on the card when the error occurs. then, until I unmount the card again, it barely functions at all!
A big factor in buyinh this tablet, unlocking, then rooting it was so that I'd have an awesome, small, tablet that had loads of storage & could be transported around very easily. If I can't get the cards to work with it, that's a big part of it's usefulness to me down the drain.
I tried to download the kernal that was mentioned above the message of yours that I'm replying to but the file has been moved. Do you still have it?.......or know how I can resolve my problem without it?
Any help would be much appreciated.
Thanks.
Click to expand...
Click to collapse
You don't say which rom or firmware you are currently using. Without knowing that I wouldn't go blindly flashing kernels that are nearly a year old
It could be that your card is actually damaged as I can copy files just fine on mine. I'm using a SanDisk Ultra uhs-1.
ROM & Firmware
sbdags said:
You don't say which rom or firmware you are currently using. Without knowing that I wouldn't go blindly flashing kernels that are nearly a year old
It could be that your card is actually damaged as I can copy files just fine on mine. I'm using a SanDisk Ultra uhs-1.
Click to expand...
Click to collapse
Hi sbdags,
Roger that
I'm not bad with most things tecchie but whilst I know which ROM I'm using, I'm not sure what the firmware is.
I recently updated to CROMI-X 5.2.2 from an earlier version in the hope that that might include an update or something that would solve my SD card problem.......it didn't
With regard to 'Firmware', I'm not sure where that's listed on the tablet but in the 'About' tab in my settings, it says:
Android Version - 4.2.1
Kernal Version - 3.1.10-g215ae8bf [email protected] # 1
Build Number - TF700 CHROMI-X 5.2.2 - 10.6.1.27.5 WW DEODEX
Pad EC Version - PAD-EC20T-0216
MobileDock Version - DOCK-EC20N-0207
I hope the firmware information you need is in there somewhere?
The card I bought is the latest 64Gb Samsung Micro SDXC Pro UHS-1 (Class 10) with write speeds of 20Mb/s & 70Mb transfer speed. I had read the formums & was torn between this card & the SanDisk 64Gb Ultra Micro SDXC (Class 10), the two-tone red/grey version, presumably like the one you're using but the Samsung was faster & at the time I bought it, the Samsungwas almost £15 cheaper. Since they were both reported to work, I opted for the Samsung card; maybe that was a bad decision?
I've just ordered the SanDisk 64Gb card, in the hope that that one will work because as i said, it really would be a shame if I can't make use of the extended storage that the SD crads give.
Do you use your SanDisk card in Micro SD form in the tablet or SD form in the dock.....or both......& have you got them formatted to exFAT or some other format?
Thanks again for your attention.
dan5001 said:
Hi sbdags,
Roger that
I'm not bad with most things tecchie but whilst I know which ROM I'm using, I'm not sure what the firmware is.
I recently updated to CROMI-X 5.2.2 from an earlier version in the hope that that might include an update or something that would solve my SD card problem.......it didn't
With regard to 'Firmware', I'm not sure where that's listed on the tablet but in the 'About' tab in my settings, it says:
Android Version - 4.2.1
Kernal Version - 3.1.10-g215ae8bf [email protected] # 1
Build Number - TF700 CHROMI-X 5.2.2 - 10.6.1.27.5 WW DEODEX
Pad EC Version - PAD-EC20T-0216
MobileDock Version - DOCK-EC20N-0207
I hope the firmware information you need is in there somewhere?
The card I bought is the latest 64Gb Samsung Micro SDXC Pro UHS-1 (Class 10) with write speeds of 20Mb/s & 70Mb transfer speed. I had read the formums & was torn between this card & the SanDisk 64Gb Ultra Micro SDXC (Class 10), the two-tone red/grey version, presumably like the one you're using but the Samsung was faster & at the time I bought it, the Samsungwas almost £15 cheaper. Since they were both reported to work, I opted for the Samsung card; maybe that was a bad decision?
I've just ordered the SanDisk 64Gb card, in the hope that that one will work because as i said, it really would be a shame if I can't make use of the extended storage that the SD crads give.
Do you use your SanDisk card in Micro SD form in the tablet or SD form in the dock.....or both......& have you got them formatted to exFAT or some other format?
Thanks again for your attention.
Click to expand...
Click to collapse
Well the ROM is mine so you are all good there. Lol. I only use fat32 as that is how the cards come.
Are you copying the files in esfileexplorer? Are they single files? Total size?
File Sizes
sbdags said:
Well the ROM is mine so you are all good there. Lol. I only use fat32 as that is how the cards come.
Are you copying the files in esfileexplorer? Are they single files? Total size?
Click to expand...
Click to collapse
Hi sbdags.
I've tried using both the File Explorer that was included with CHROMI-X & another one from the Play Store that I use on my phone called Astro; the same thing happens with both. As I say, the card seemed okay to begin with but all I had put on it was my Nandroid & Titanium backups (approx. 2Gb total with lots of small files included). The problems started when I tried to copy a season of a TV series onto the card to free up space on the internal SD card. It started off okay & I wasn't expecting any problems but then approx 1.5Gb, I got an I/O write error & then all the problems I described in my first post.
As an aside, the card performed best when formatted to FAT32 but according to the SD Card Association, SDXC cards come formatted as exFAT, so that's how it's currently formatted; I thought if that's how it came & it initially worked okay, maybe that would solve the issue. Again, I was wrong!
So, I'll format it back to FAT32 again but as I've already had it in that format, I wouldn't anticipate any change to the card's behaviour.
The 64Gb SanDisk card should be here in a few days, so I'll be able to report on whether that one works or not then.
Did you have to re-format yours when you first got it or are the SD Card Association talking nonsense? Oh, & you didn't say whether you're able to use your cards in both micro form in the pad &/or full-size form in the dock? Also, was the Firmware information you asked for in that mass of stuff I listed. If not, where do I find it, so I know for the next time you ask
Thanks again
dan5001 said:
Hi sbdags.
I've tried using both the File Explorer that was included with CHROMI-X & another one from the Play Store that I use on my phone called Astro; the same thing happens with both. As I say, the card seemed okay to begin with but all I had put on it was my Nandroid & Titanium backups (approx. 2Gb total with lots of small files included). The problems started when I tried to copy a season of a TV series onto the card to free up space on the internal SD card. It started off okay & I wasn't expecting any problems but then approx 1.5Gb, I got an I/O write error & then all the problems I described in my first post.
As an aside, the card performed best when formatted to FAT32 but according to the SD Card Association, SDXC cards come formatted as exFAT, so that's how it's currently formatted; I thought if that's how it came & it initially worked okay, maybe that would solve the issue. Again, I was wrong!
So, I'll format it back to FAT32 again but as I've already had it in that format, I wouldn't anticipate any change to the card's behaviour.
The 64Gb SanDisk card should be here in a few days, so I'll be able to report on whether that one works or not then.
Did you have to re-format yours when you first got it or are the SD Card Association talking nonsense? Oh, & you didn't say whether you're able to use your cards in both micro form in the pad &/or full-size form in the dock? Also, was the Firmware information you asked for in that mass of stuff I listed. If not, where do I find it, so I know for the next time you ask
Thanks again
Click to expand...
Click to collapse
I've never tried my card in the dock to be honest. Both my cards; 32GB and 64GB are SanDisk, I am not sure now what they cam in but I am using fat32 as I formatted them myself.
As for the stuff you posted I just wanted to know the rom and bootloader version. So CROMi-X 5.2.2 on 10.6.1.14.10 would have ben enough. Maybe the kernel helps too. In your case you are using the stock kernel. You may get better results on thatv4 kernel?
SD Cards & Kernels
sbdags said:
I've never tried my card in the dock to be honest. Both my cards; 32GB and 64GB are SanDisk, I am not sure now what they cam in but I am using fat32 as I formatted them myself.
As for the stuff you posted I just wanted to know the rom and bootloader version. So CROMi-X 5.2.2 on 10.6.1.14.10 would have ben enough. Maybe the kernel helps too. In your case you are using the stock kernel. You may get better results on thatv4 kernel?
Click to expand...
Click to collapse
Cheers.
So, I think I've grasped that the kernel is similar to the BIOS on a PC; is that correct?
When you say that I may get better results using _that's v.4 kernel, what improvements are you thinking I might see?
dan5001 said:
So, I think I've grasped that the kernel is similar to the BIOS on a PC; is that correct?
Click to expand...
Click to collapse
Not really, the kernel is ... the kernel. The core of the operating system. Under Windows it's ntoskrnl.exe.
You could compare the bootloader with the PC BIOS - its main function (nowadays) is to start the operating system.
[HTC One SV] SD Card
I found it nowhere else.
The HTC ONE SV works also with microSDXC Card. In the specs it says microSDHC cards but I operate mine since I bought it with a 64GB microSDXC card without any problems.
I have to post this here because we still have no dedicated Forum for the HTC One SV
This are good news!
Also thinking about buying a bigger one.
Which one do you use, have you a link?
old.splatterhand said:
This are good news!
Also thinking about buying a bigger one.
Which one do you use, have you a link?
Click to expand...
Click to collapse
SanDisk Ultra microSDXC Card 64GB Class 10
Wow, this seems like a beast
internal storage
hi everybody!i'm gonna buy this phone...do you know if theres is a version with 4 GB internal storage?or exist only the 8 GB version?
scorpy5987 said:
hi everybody!i'm gonna buy this phone...do you know if theres is a version with 4 GB internal storage?or exist only the 8 GB version?
Click to expand...
Click to collapse
There is only a 8 GB version, but you get at least around 4 GB left.
old.splatterhand said:
There is only a 8 GB version, but you get at least around 4 GB left.
Click to expand...
Click to collapse
I was almost sure..but i had seen somewhere the tech specs that indicated a 4 GB version...i think there was a mistake !
old.splatterhand said:
There is only a 8 GB version, but you get at least around 4 GB left.
Click to expand...
Click to collapse
Is there a way to increase the 1.1GB space for the application (EX join with the 4GB internal space). I don't need internal space for data, i usually store them in the SD.
mimmori said:
Is there a way to increase the 1.1GB space for the application (EX join with the 4GB internal space). I don't need internal space for data, i usually store them in the SD.
Click to expand...
Click to collapse
If you are rooted you can Swap your internal and external memory
old.splatterhand said:
If you are rooted you can Swap your internal and external memory
Click to expand...
Click to collapse
Fantastic! but with this i have a lot of space only for SD movable app. Do the internal 1.1 GB partition stay the same?
mimmori said:
Fantastic! but with this i have a lot of space only for SD movable app. Do the internal 1.1 GB partition stay the same?
Click to expand...
Click to collapse
After this mod your sd card will be recognized as internal memory and the internal around 4 GB will be recognized as sd card.
Ok... Is possible to change partition table for join application space with intrrnal space (1.1+4 GB) and use for applicazioni? So the sd could be used as external space...
Sent from my HTC One SV using xda app-developers app
I think for the moment this mod is all and the best you can do.
As i did not create it, i can't say, if there will be other variants in the future.
Samsung Micro SD XC 64 GB
hi, someone has this sd card and can tell me if it works with htc one sv?
thanks.
have a nice day
Works Great!!!
fulrosa said:
hi, someone has this sd card and can tell me if it works with htc one sv?
thanks.
have a nice day
Click to expand...
Click to collapse
ok i finally buy it... and it works very good.. :victory: must have...
have a nie day.
got ADATA class 10 , 32 gigs . Is enought for me i got actualy a lot free space on it ... No problems at all .
Zamek said:
SanDisk Ultra microSDXC Card 64GB Class 10
Click to expand...
Click to collapse
Did you have to do anything in particular to get the card to work? Because I just got the exact same card as this one from Amazon and it doesn't work at all. D=
xandroid5.1 said:
Did you have to do anything in particular to get the card to work? Because I just got the exact same card as this one from Amazon and it doesn't work at all. D=
Click to expand...
Click to collapse
Nope, as far as I can remember it was detected by the phone worked.. It still works like a charm. I am using the phone now for over a year with that card and never had problems. I think I tested nearly all available ROMS for that phone and never had problems with the card. At present I am using ViperSV 1.1.1.on the phone.
Zamek said:
Nope, as far as I can remember it was detected by the phone worked.. It still works like a charm. I am using the phone now for over a year with that card and never had problems. I think I tested nearly all available ROMS for that phone and never had problems with the card. At present I am using ViperSV 1.1.1.on the phone.
Click to expand...
Click to collapse
See, I'm also running ViperSV 1.1.1 and when I put the card in initially it said it was unsupported or damaged. Tried reformatting it in Windows, now shows up as 59GB exFAT in Windows but still not working on the phone. Is yours formatted differently or something?
UPDATE: I'm hearing elsewhere that it needs to be formatted as FAT32 in order to work, and Windows doesn't want to format it to anything other than exFAT or NTFS (while SD Formatter only uses exFAT). Apparently there's some sort of issue with the fact that the Class 10 cards have exFAT and a mysterious 16MB hidden offset partition at the start of the drive, so I'm now gonna try getting rid of that to see if it works.
UPDATE: Yep, looks like both: 1. The phone (Android?) doesn't support exFAT without a mounting mod, and 2. That weird 16MB offset at the start of the drive seems to cause compatibility issues as well. Have wiped the offset and reformatted to FAT32, and the card now works.
Thanks for the recommendation and the quick reply!
xandroid5.1 said:
See, I'm also running ViperSV 1.1.1 and when I put the card in initially it said it was unsupported or damaged. Tried reformatting it in Windows, now shows up as 59GB exFAT in Windows but still not working on the phone. Is yours formatted differently or something?
UPDATE: I'm hearing elsewhere that it needs to be formatted as FAT32 in order to work, and Windows doesn't want to format it to anything other than exFAT or NTFS (while SD Formatter only uses exFAT). Apparently there's some sort of issue with the fact that the Class 10 cards have exFAT and a mysterious 16MB hidden offset partition at the start of the drive, so I'm now gonna try getting rid of that to see if it works.
UPDATE: Yep, looks like both: 1. The phone (Android?) doesn't support exFAT without a mounting mod, and 2. That weird 16MB offset at the start of the drive seems to cause compatibility issues as well. Have wiped the offset and reformatted to FAT32, and the card now works.
Thanks for the recommendation and the quick reply!
Click to expand...
Click to collapse
Happy for you!! This can help me too.
I just bought a Samsung GB sdcard, and I've reformatted it into FAT32. My butterfly can read it with no problem. I have problem after I copied my old files into this new card and put it into my X920d. On my computer, everything has been copied and the total usage is just the same. But when I put it into my phone, some files just missing, and you can see the space(usage) getting less, files lost. Any comment??
Only 32GB is supported here!
bluheart said:
Only 32GB is supported here!
Click to expand...
Click to collapse
I'm running under 4.2.2 now and it's a BoA 5.2 custom rom. But I've tried it on my old galaxy s (CRom 7.0 ) it is OK, nothing lost....is it possible because of the hardware or rom? But the feedback from other BoA rom user, seems 64gb is ok for them.
bluheart said:
Only 32GB is supported here!
Click to expand...
Click to collapse
I'm using Sandisk Ultra 64GB Class 10/UHS, and it works flawlessly