Database Info

GT One Ex MT6575 5.08'' (T595) Android 4.0.4 smartphone

In this forum all owners of GT One Ex MT6575 5.08'' (Telsda T595) smartphone are welcome to help each other.
Manufacturer: Telsda (www .telsda. com) (?)
Model number T595 (?)
(?) Not sure as this info was only printed on sticker, but couldn't be found on website.
Hardware : MT6575
Model : GT one EX
Build number : ALPS.ICS.MP.V2.2
Build date UTC : 20120914-073612
Android v : 4.0.4
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Sep 14 15:35:04 HKT 2012
Photos and Specification: picasaweb .google. com/113151207291825252259/GTOneExMTK6575508?authkey=Gv1sRgCJfzv5WmxvOhiAE
To get to the Stock Recovery (Android System Recovery <3e>) screen: hold VolumeDown+Power 3 seconds, after you seed "Dead Robot", press Home (middle) button. (I recommend you to do the "backup user data" immediately!)
To get to the "Factory Mode" screen: hold VolumeDown+Power many seconds (just for testing your hardware)
To root your phone the only method that worked was by using MTK Droid Root & Tools 2.2.8, but not newer (docs .google. com/open?id=0BzICkEGDGbT1R3otSE9YNjZWN3M). For instruction in Russian read this: forum .china-iphone. ru/viewtopic.php?p=794732#p794732, but for English speakers:
0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)
1. You should get into Factory Mode first (hold VolumeDown+Power many seconds),
2. Press "Root" on your PC window of MTK Droid Root & Tools, the program will reboot your phone
3. While the phone reboots - hold VolumeDown+Power many seconds to get into Factory Mode again
4. The program MTK Droid Root & Tools will then reboot the phone again, while you repeat Step 3.
5. Now you have a temporary root, therefore press "SuperUser" button to get a permanent root for all apps that will ever need it.
6. Press "Backup" to create full backup and share in this forum!
7. Press "To prepare blocks for FlashTool" (a tool to restore IMG images of your phone from your desktop)
My own fresh backup (ZIP archive of IMG files ready for SP Flashtool): docs. google. com/open?id=0BzICkEGDGbT1QjZKQnhVY2F1Znc
As the built-in ROM is too small for many apps, I recommend using Link2SD to move apps to SD card.
Please upload some more advanced Recovery (e.g. CWM Recovery or Modified Stock Recovery). Thank you!
Russian forum: forum .china-iphone. ru/viewtopic.php?f=46&t=24861

reinis.berzins said:
In this forum all owners of GT One Ex MT6575 5.08'' (Telsda T595) smartphone are welcome to help each other.
Manufacturer: Telsda (www .telsda. com) (?)
Model number T595 (?)
(?) Not sure as this info was only printed on sticker, but couldn't be found on website.
Hardware : MT6575
Model : GT one EX
Build number : ALPS.ICS.MP.V2.2
Build date UTC : 20120914-073612
Android v : 4.0.4
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Fri Sep 14 15:35:04 HKT 2012
Photos and Specification: picasaweb .google. com/113151207291825252259/GTOneExMTK6575508?authkey=Gv1sRgCJfzv5WmxvOhiAE
To get to the Stock Recovery (Android System Recovery <3e>) screen: hold VolumeDown+Power 3 seconds, after you seed "Dead Robot", press Home (middle) button. (I recommend you to do the "backup user data" immediately!)
To get to the "Factory Mode" screen: hold VolumeDown+Power many seconds (just for testing your hardware)
To root your phone the only method that worked was by using MTK Droid Root & Tools 2.2.8, but not newer (docs .google. com/open?id=0BzICkEGDGbT1R3otSE9YNjZWN3M). For instruction in Russian read this: forum .china-iphone. ru/viewtopic.php?p=794732#p794732, but for English speakers:
0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)
1. You should get into Factory Mode first (hold VolumeDown+Power many seconds),
2. Press "Root" on your PC window of MTK Droid Root & Tools, the program will reboot your phone
3. While the phone reboots - hold VolumeDown+Power many seconds to get into Factory Mode again
4. The program MTK Droid Root & Tools will then reboot the phone again, while you repeat Step 3.
5. Now you have a temporary root, therefore press "SuperUser" button to get a permanent root for all apps that will ever need it.
6. Press "Backup" to create full backup and share in this forum!
7. Press "To prepare blocks for FlashTool" (a tool to restore IMG images of your phone from your desktop)
My own fresh backup (ZIP archive of IMG files ready for SP Flashtool): docs. google. com/open?id=0BzICkEGDGbT1QjZKQnhVY2F1Znc
As the built-in ROM is too small for many apps, I recommend using Link2SD to move apps to SD card.
Please upload some more advanced Recovery (e.g. CWM Recovery or Modified Stock Recovery). Thank you!
Russian forum: forum .china-iphone. ru/viewtopic.php?f=46&t=24861
Click to expand...
Click to collapse
Hi, can You please re-upload the drivers from "0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)". I'm still having problem to access this file. Thanks.

Delete all the spaces in the address
zbyszek45 said:
Hi, can You please re-upload the drivers from "0. Make sure all 3 drivers are installed (docs. google .com/open?id=0BzICkEGDGbT1N2R2Z1RvX0lHVXM)". I'm still having problem to access this file. Thanks.
Click to expand...
Click to collapse
Copy the address, paste in the browser address bar, delete all the spaces in the address. After the address loads, choose File > Download. I tested it again and it downloaded successfully.

i need your scatter file
reinis.berzins;35885773
said:
My own fresh backup (ZIP archive of IMG files ready for SP Flashtool): docs. google. com/open?id=0BzICkEGDGbT1QjZKQnhVY2F1Znc[/B]
Click to expand...
Click to collapse
the scatter file on that link does not work. Can you post a new file? thanks!

quangphi9s said:
the scatter file on that link does not work. Can you post a new file? thanks!
Click to expand...
Click to collapse
As far as I can remember - you should use the scatter file that came with the SP Flashtool software. If this particular version of SP Flashtool doesn't work, try another. Or alternatively in the SP Flashtool dialogue try to uncheck some image files (especially red ones like PRELOADER and DSP_BL) that shouldn't be flashed.
In this folder you will find several scatter files: https://drive.google.com/folderview?id=0BzICkEGDGbT1UVIwV1JmMHRIR0U&usp=sharing

It works.
reinis.berzins said:
As far as I can remember - try to uncheck some image files (especially red ones like PRELOADER and DSP_BL) that shouldn't be flashed.
Click to expand...
Click to collapse
Thank you very much!

sorry for the Google translator, the English do not understand.
I'm trying to fill in the phone firmware, but throws this error> img69. imageshack. us/img69/1421/6j0v .jpg
What you need to do to make this a Chinese work?

Have flashed this phone on 99% and Flash tool give ERROR: S_FT_NFB_DOWNLOAD_CODE_FAIL(4014)
Need help, thanks!

Root Qmobile A2 V3

Hey and Salam everybody,
important note: i am taking no responsibility if your phone dies or what so ever. do wipe reset your phone through stock recovery before proceeding. only use the softwares i provided. and also only email me if you run into problems using the softwares i provided. and please wipe data reset ur phone before proceeding. all the softwares are in my dropbox
This is my first ever post so make sure if you get your problem solved i would very much appreciate that you help others too.
All the credit goes to rua1 (http://forum.xda-developers.com/member.php?u=5119815)
I bought the phone a month back and spent 3 weeks trying to root this MTK6575 Chipset.
You can only root this phone through test point from PMT method. Google test point and pmt for more information.
Attached a pic showing a test point cable . people having knowledge of modding 360 will know what a pmt is. its pogo mo thoin. but for phone its bit different.
first of all turn your phone on and connect it to mtkdroidtools and then make scatter of it. and save it for future use . picture attach. clik blocks map and then click create scatter.
its better to go into stock recovery and wipe data reset and wipe cache. take your sim cards out and your memory card. you dont need them.
my phone details.
Model Number : A2
Android version : 2.3.6
Baseband Version: MAUI.11AMD.W11.50.SP.V14.P2, 2012/09/07 10:26
Kernal Version: 2.6.35.7 [email protected] #1 Thu Oct 11 13:41:54 HKT 2012
Build Number : ALPS.GB2.MP.v2.2
Custom Build Version : S8035S_PP_F1_PK_1.06_V3
Files you need:
1 Drivers For MTK6575 - Qmobile A2 V3
2 Google ADB Latest
3 MTK Droid Tools
4 Smart Phone Flash Tools
5 Superuser-3.1.3-arm-signed
you can find all these files in my dropbox
https://www.dropbox.com/sh/3wjle4gfu9ekc2x/2Y2f1yuZlE
install drivers for mtk6575
open flash tools and select scatter loading. select the scatter MT6575_Android_scatter that was made earlier and click ok. go to second tab in flash tools. now your in read back tab. click add. save the file titled rom_1 in the extracted mkt droid tools folder. then select hex and read page only . in start address write 0x0000000000000000 and in length 0x10da0000 < this is the address of cache in scatter and your might be different depending on the date you bought the phone.
click ok
now click read back plug in the usb cable with no battery in and just touch the needle with the test point in pic. it will start reading back. once it completes it will give you green circle.
now go to mtkdroidtools and open mtkdroidtools.exe turn on your phone normally and let the tools detect the phone. once it detects you will see different information on main screen. now goto second tab (root, backup, recovery) and click " to process file ROM_ from flash tool" at this point locate the file rom_1 you just saved in rom folder of extracted mtk droid tools. once you give it the location it will start processing. it will ask you if you want it to automatically make cwm ? click yes once the process gets complete you will have multiple files in
\MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
your folder name will be different depending on date and time.
inside the folder you will have lots of files. the file you need to flash will be A2_121030__recovery_130415-104113 again the numbers at the end of the file depends on your date and time.
now again open spflash tools on the main screen select scatter loading. locate this folder.
\MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
open the scatter and uncheck all boxes . check only one box that says recovery. double click on and find this file.
A2_121030__recovery_130415-104113
its in \MTK Droid Tools\MtkDroidTools\backups\A2_121030_ForFlashtoolFromReadBack_130415-104113
now click download ignore the warning take the battery out insert the usb cable and make sure to touch the test point after u click download . note that from this method ur phone is in bootrom mode. if everything is successfull youll get a green circle.
you might get errors and for that your scatter must be edited for example adding __NODL_ before CACHE in scatter. if that doesnt work then you might have to add __NODL_ before USRDATA and if still ur gettin error well then email me.
now to test recovery press both vol+ and vol- button at the same time and hit power . go into recovery by pressing vol+. and you have cwm on your phone. now the first and most important thing take backup and save it,
its also better to stay into recovery and open mtk droid tools and make bakcup by going into second tab.
after that put Superuser-3.1.3-arm-signed on ur sd to flash through cwm
now flash superuser-3.1.3-arm-signed through cwm
turn on your phone and see if you have superuser on ur home screen
open super user and grant permission and voila your rooted go to info tab and check for updates
thats it your phones rooted.
if i helped you then press thank
in the attachment you can see the cable i made. make yours the same way
UPDATE: SPFT and MTKDROIDTOOLS update versions have been put in dropbox.
again if you encounter pmt layout changed or other errors then email me so i can help you gettin rid of errors with editing the scatter. [email protected]

[Q] Rooting Tinji GT-i9220 MT6575

Hello together,
i've tried to root my new Tinji GT-i9220 with an MT6575 processor but im stuck.
Im 100% sure that i installed the drivers right.
First i have tried most of the one click tools without any noticeable success.
Than i followed this (http://forum.xda-developers.com/showthread.php?t=1923764) tutorial.
On my phone there are no mmcblk's but mtd's so the so i saved the scatter file generated by MTK Rom Studio (for some reason it suggest MT6573_Android_scatter instead of 6575) without the "_emmc" at the end.
Because of the missing "_emmc" i have to choose between 4 different Read Methods when reading the boot and recovery.img from the phone
"Read Page + Spare", "Read Page Only", "Read Spare Only" and "Read Page With ECC".
The Files created by "Read Page + Spare" and "Read Spare Only" produces error messages when TWRP or MKTDroidTools try to modify the files.
The "Read Page Only" and "Read Page With ECC" files pass through TWRP fine, but when im trying to upload the modified recovery.img to the phone in SP Flash Tool i get the Following Error:
BROM ERROR : S_DA_DRAM_NOT_SUPPORT (3004)
[H/W] The handset doesn't support DRAM. Please ask for help.
Click to expand...
Click to collapse
And here i am asking for help
Is it correct to choose "Read Page Only" while reading the files from the phone?
Does anyone know what else i can try to get the phone rooted?
Let me thank you for any help in advance.
Ohh before i forget here are a few specs from the phone and software versions i use
Tinji GT-i9220
BB Chip: MT6575
MS Board: android_2x_gb2
Modem Vers.: MAUI.11AMD.W11.50.SP.V16. 2012/06/18 16:51
UBoot Vers. : 2010.06
Kernel Vers. : 2.6.35.7
Android Vers.: 4.1.4
Sm Ver.: i9220_Dual-core1.4G_1GRAM
Custom Bild Verno.: 1346511946
SP Flash Tool V3.1304.0.sn119
Port TWRP V2.4.4.0 for MT6575/ 77/ 89
MTK Rom Studio 1.1.77.301
If you need any further information i just ask.

Another question i've made a backup of every mtd on the phone, but if i load the scatter file SP Flash Tool throws the error
BROM ERROR : S_DL_PC_BL_INVALID_GFH_FILE_INFO (5066)
Click to expand...
Click to collapse
for the DSP BL and Preloader.
Does anyone have an idea why?

Problem solved
Okay i solved my problems, had to remove some empty bytes from DSP_BL and Preloader files to get SP Flash Tool to load them correctly.
After that i found out that i had to take the yaffs2 images i've created with the "Read Page and Spare" option and then delete a bunch of bytes to make them readable for unyaffs once unyaffs was able to read them i was able to flash them to the phone.
After i managed to boot again, rooting the phone was kinda easy, i know that some people also have problems rooting exactly this phone so if anyone is interested i could upload a prerooted rom without the preinstalled chinese apps.
Is there an option to mark a question as solved?

Not for me. I have the same problem !
gagginator said:
Okay i solved my problems, had to remove some empty bytes from DSP_BL and Preloader files to get SP Flash Tool to load them correctly.
After that i found out that i had to take the yaffs2 images i've created with the "Read Page and Spare" option and then delete a bunch of bytes to make them readable for unyaffs once unyaffs was able to read them i was able to flash them to the phone.
After i managed to boot again, rooting the phone was kinda easy, i know that some people also have problems rooting exactly this phone so if anyone is interested i could upload a prerooted rom without the preinstalled chinese apps.
Is there an option to mark a question as solved?
Click to expand...
Click to collapse
Hey,
I have got the same problem but with another phone, it is a clone S3 mini with MK6575.
I get a similar error when I try to load the preloader and dsp_bl which I have generated with another exactly same type.
Currently my phone is dead, I can just comunicate with the SP flash tool but til now I can't make it work again.
These are the data extracted from the phone:
bb chip MT6575
ms board E952
IMEI xxxx
modem ver. MAUI.11AMD.W11.50.SP.V18.P2. 2012/10/10 18:37
Bar code : xxxx
build time Wed May 29 15:29:24 CST 2013
Uboot Ver. : 2010.06
Kernel Ver. : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GDC) ) #1 PREEMPT Wed May 29 15:26:11 CST 2013
Android Ver.: 2.3.3
SW Ver. : JRO03H.I8190XXALJL
Custom Build Verno. : V2G.13.05.29
How have you solved the problem with the preloader and dsp_bl ?
(I had a look to your files and they are very similar, if not exactly the same, to mine)
Thanks a lot in advance for any help in the stuff !

giuspepoli said:
How have you solved the problem with the preloader and dsp_bl ?
(I had a look to your files and they are very similar, if not exactly the same, to mine)
Thanks a lot in advance for any help in the stuff !
Click to expand...
Click to collapse
Basicly i just looked at the files i have generated with SP Flash Tools and the ones of other MTK6575 phones in an hex editor.
Ive noticed that all i all the other preloader files started with the same "MMM" string, so i just deleted anything in front of the first occuring of "MMM" in my preloader file. I also had to remove a bunch of bytes at the end of both files but i dont remember how i figured out how many
I could look at the files and maybe tell you more when im done with work

Partially solved but still problems
gagggi said:
Basicly i just looked at the files i have generated with SP Flash Tools and the ones of other MTK6575 phones in an hex editor.
Ive noticed that all i all the other preloader files started with the same "MMM" string, so i just deleted anything in front of the first occuring of "MMM" in my preloader file. I also had to remove a bunch of bytes at the end of both files but i dont remember how i figured out how many
Click to expand...
Click to collapse
I tried to remove the bytes before the "MMM" and some tentative removing others at the end but I did not succeeded in the ingestion of the preloader and dsp_bl files into the SP Flash Tools. On the other hand, I have processed the files with MTK Studio Pro and now the ingestion does not create problems. The phone now can at least boot in the recovery mode (for some reason not in the download mode), SP Flash Tools can see the nand and transfer the files.
However, I'm getting problems with other files, "sec_ro", "fat", "system" (or "android"), "cache" and "usrdata" when downloading (or update firmware).:crying:
The error is "s_ft_nand_readlen_not_page_alignment".
I tried to read the files again many times, also with different format page, spare, etc... with the other working phone obtaining the same error.
Any suggestion ?

giuspepoli said:
I tried to remove the bytes before the "MMM" and some tentative removing others at the end but I did not succeeded in the ingestion of the preloader and dsp_bl files into the SP Flash Tools. On the other hand, I have processed the files with MTK Studio Pro and now the ingestion does not create problems. The phone now can at least boot in the recovery mode (for some reason not in the download mode), SP Flash Tools can see the nand and transfer the files.
However, I'm getting problems with other files, "sec_ro", "fat", "system" (or "android"), "cache" and "usrdata" when downloading (or update firmware).:crying:
The error is "s_ft_nand_readlen_not_page_alignment".
I tried to read the files again many times, also with different format page, spare, etc... with the other working phone obtaining the same error.
Any suggestion ?
Click to expand...
Click to collapse
Could you send me your updated preloader and dsp_bl working files ?
In this case, I could try if this would solve the problems.

Hi all... where I can get oficial rom for this device ? Tinji I9220 MT6575

IBall Slide 6318i Firmware

Hey all, Protox 109 os back with another dev piece for the tablet iball slide 6318i
I have by some undisclosed means got the stock firmware of the device which can be used for modding and other stuff.
Here is the Download link :
http://d-h.st/va3
Enjoy and if it is used then dont forget crediting me
How flash the img file :
Method 1 :-
Copy the img file to the external sd and restart the tab
you will get a message confirming flash option
click ok, or yes and it will happen automaticaly
Method 2 :-
Copy file to ext sd card
Reboot tab to recovery mode
Click update Rockchip image option
voila it will be done
Method 3 :-
Get your rockchip drivers installed
Download rockchip batch image flashing tool
follow onscreen instructions and flash image
Now after all this you need to click a thanxx

protox 109 said:
Hey all, Protox 109 os back with another dev piece for the tablet iball slide 6318i
I have by some undisclosed means got the stock firmware of the device which can be used for modding and other stuff.
Here is the Download link :
http://d-h.st/va3
Enjoy and if it is used then dont forget crediting me
How flash the img file :
Method 1 :-
Copy the img file to the external sd and restart the tab
you will get a message confirming flash option
click ok, or yes and it will happen automaticaly
Method 2 :-
Copy file to ext sd card
Reboot tab to recovery mode
Click update Rockchip image option
voila it will be done
Method 3 :-
Get your rockchip drivers installed
Download rockchip batch image flashing tool
follow onscreen instructions and flash image
Now after all this you need to click a thanxx
Click to expand...
Click to collapse
Hi,
Anybody successfully tried flashing this firmware ?
Can somebody help me to boot my slide 6318i into recovery ?
I want to reset my tab to factory state.
thanks,

Just put the update.img to sd-ext and reboot tab normally and there will be an option to update the tab. Click OK and it will be done. But I am not really sure about this option but it should work

protox 109 said:
hey all, protox 109 os back with another dev piece for the tablet iball slide 6318i
i have by some undisclosed means got the stock firmware of the device which can be used for modding and other stuff.
Here is the download link :
http://d-h.st/va3
enjoy and if it is used then dont forget crediting me :d
how flash the img file :
Method 1 :-
copy the img file to the external sd and restart the tab
you will get a message confirming flash option
click ok, or yes and it will happen automaticaly
method 2 :-
copy file to ext sd card
reboot tab to recovery mode
click update rockchip image option
voila it will be done
method 3 :-
get your rockchip drivers installed
download rockchip batch image flashing tool
follow onscreen instructions and flash image
now after all this you need to click a thanxx
:d
Click to expand...
Click to collapse
please give me a flashtool link because my tablet is not turn on and if some time its turn on but stuck at start up logo so i want to full flash with firmware so please give a flashtool link

ThL T100s MTK6592 Root + Instructions (Working on 02.01.2014 Firmware)

I Found The Way To Root THL T100s
So i Attach The Files You Need And Instructions In The File . !!!!
***************************
INSTRUCTIONS
Phone Side
Open USB debugging from settings/Developer options
Open Unknown sources from settings/Security
PC Side
1 : Run AdbDriverInstaller and press Install
wait untill drivers are installed and Device status is OK
2 : Run Root.exe in vroot folder it will install and update the program..
then when the program is ready it will open on your phone a program leave
it open and check again your PC it shall have a green button with name ROOT .
Press it to start the root
3 : Wait and it will start loading .
Look at your phone , it will ask to install some
applications (mtk camera).
Allow them to be installed and keep waiting
4 : The Phone Will Restart Many Times 4-5 . Wait untill it opens .
5 : After Some Time At Your PC it will ask you to press restore at your phone
(do not be alerted if it does not show it my phone did not show it so i let it continue )
6 : It Will End , The Phone Will Restart Again And Then You Will Have Root Access
7 : The Root Application Is Called Kinguser ...
*tip download and install from playstore the application root checker and check if you have correct root
THATS ALL HAVE FUN WITH YOUR ROOTED PHONE .
You can freely un-install the application that was installed during this rooting the (chinese one)
* During the root process your phone will display a message asking if you really want to install mtk camera
which is the app that the root exploit is contained in.
If you accept, v root will root your phone.
You can research mtk camera, but as far as I can tell this is simply the app that includes the exploit.
At any rate you will need to be cautious with anything you install on your PC or phone.
*************************************************
With great power comes great responsibility
I Am Not Responsible For Any Phone Damages
USE IT ON YOUR OWN RISK !!!
This Is Just A Guide What I Did And Worked
So i Can Help Other Who Want To Root
If you Are Looking For ROOT you know what
and why This Guide Is HERE !!!
Dragons Ahead CARE
1. You can turn your smartphone into a brick.
2. Your phone warranty turns void.
3 Malware can easily breach your mobile security
USE IT ON YOUR OWN RISK !!!
DOWNLOAD CLICK HERE (G-Cloud)
​

Reserved
How To Install TWRP 2.5.0.0 Recovery For THL T100s
After Rooting Your Device Its Time For A Custom Recovery
How To Install :
Easy Way
Open Play Store And Download Mobileuncle Tools
Download THIS FILE
Extract The TWRP 2.5.0.0 THL T100s.zip To Your SD Card Root Folder (Now You Should Have A File Named recovery.img )
Open Mobileuncle Tools And Select Recovery Update
First File In The List Should Be recovery.img ( Recovery file in SDCard )
It Will Ask If You Are Sure To Flash The Recovery (recovery.img(6840Kb)
Press Ok And After The Installation Complete It WIll Ask You To Boot In Recovery
Go Ahead And Reboot To Enjoy Your Custom Recovery
(Thanks to Needrom For The Recovery File)​
Advance Way By Kurt994 (THANKS A LOT KURT )
Kurt994 said:
Hi,
For CWM/root I used an other method with root in EN and not in CN
CWM
Download SP_Flash_Tool_v5.1343.01
Download cwm for THL T100s on Needrom
Download Adb Driver Installer
1) Install ADB drivers
2) Shut down THL t100s, remove battery, disconnect from the computer
3) Start flash tool
4) Don't touch to download agent
Change the scatter file for the one in the CWM folder
5) Select download
6) Check only Recovery and verify the location of CWM
7) Click Download
8) Plug your phone and the progress bar should wake up and install cwm.
9) Reboot
If nothing happens, you have a problem with the drivers. If you have this problem, send me a screenshot cause I don't remember what was the exact problem
ROOT
1) Download Super Su
2) Put it on the sd card
3) Restart the phone in recovery (with Mobileuncle MTK Tools for example)
4) Flash the Super Su with CWM
5) Reboot
P.S.: Sorry i can't post outside kinks
P.S..S: Sorry for my bad english...
Click to expand...
Click to collapse

vinylakos said:
Reserved For Future Use ....
Click to expand...
Click to collapse
Maybe Photo Instructions If I Ever Have Time

good

CWM/ROOT
Hi,
For CWM/root I used an other method with root in EN and not in CN
CWM
Download SP_Flash_Tool_v5.1343.01
Download cwm for THL T100s on Needrom
Download Adb Driver Installer
1) Install ADB drivers
2) Shut down THL t100s, remove battery, disconnect from the computer
3) Start flash tool
4) Don't touch to download agent
Change the scatter file for the one in the CWM folder
5) Select download
6) Check only Recovery and verify the location of CWM
7) Click Download
8) Plug your phone and the progress bar should wake up and install cwm.
9) Reboot
If nothing happens, you have a problem with the drivers. If you have this problem, send me a screenshot cause I don't remember what was the exact problem
ROOT
1) Download Super Su
2) Put it on the sd card
3) Restart the phone in recovery (with Mobileuncle MTK Tools for example)
4) Flash the Super Su with CWM
5) Reboot
P.S.: Sorry i can't post outside kinks
P.S..S: Sorry for my bad english...

DROPBOX problem 404
http://forum.xda-developers.com/images/icons/icon9.gif

tungoli said:
DROPBOX problem 404
http://forum.xda-developers.com/images/icons/icon9.gif
Click to expand...
Click to collapse
Check now links fixed . Hosted At Google Cloud Now ..!

Camera fix?
Hi vinylakos,
maybe you can help me.
I have the THL T100S international version. It is rooted with SuperSU and running stock rom.
Yesterday, when i opened the native camera app, it froze. So i thought i would just restart the app. After that, it immediately showed the error
"Can't connect to Camera". So i thought i would just reboot my phone and everything would be fine again. But when i did that, the camera app completely disappeared from the phone! Maybe you can help me, as it seems that you are quite familiar with the phone.
Thanks in advance! Buster
EDIT: Maybe someone can upload all the camera and gallery APKs that i need? So i can reinstall?

Kurt994 said:
Hi,
For CWM/root I used an other method with root in EN and not in CN
CWM
Download SP_Flash_Tool_v5.1343.01
Download cwm for THL T100s on Needrom
Download Adb Driver Installer
1) Install ADB drivers
2) Shut down THL t100s, remove battery, disconnect from the computer
3) Start flash tool
4) Don't touch to download agent
Change the scatter file for the one in the CWM folder
5) Select download
6) Check only Recovery and verify the location of CWM
7) Click Download
8) Plug your phone and the progress bar should wake up and install cwm.
9) Reboot
If nothing happens, you have a problem with the drivers. If you have this problem, send me a screenshot cause I don't remember what was the exact problem
ROOT
1) Download Super Su
2) Put it on the sd card
3) Restart the phone in recovery (with Mobileuncle MTK Tools for example)
4) Flash the Super Su with CWM
5) Reboot
P.S.: Sorry i can't post outside kinks
P.S..S: Sorry for my bad english...
Click to expand...
Click to collapse
This is exactly the method I used worked perfectly. I created a scatter file with Droidtools and read it in with the flash tool.

gallery2.apk
buster125 said:
Hi vinylakos,
maybe you can help me.
I have the THL T100S international version. It is rooted with SuperSU and running stock rom.
Yesterday, when i opened the native camera app, it froze. So i thought i would just restart the app. After that, it immediately showed the error
"Can't connect to Camera". So i thought i would just reboot my phone and everything would be fine again. But when i did that, the camera app completely disappeared from the phone! Maybe you can help me, as it seems that you are quite familiar with the phone.
Thanks in advance! Buster
EDIT: Maybe someone can upload all the camera and gallery APKs that i need? So i can reinstall?
Click to expand...
Click to collapse
Ok Buster i attach the camera /gallery application From THL t100s Stock .
Althought i do not thing it will help your situation .
to install this you have to take any root explorer
then go system/app and paste it in there set permissions to
owner READ WRITE
group READ
global READ
Then Restart The Phone And It Should Appear . if you need any more help i will try to help you !
Good Luck !

vinylakos said:
Ok Buster i attach the camera /gallery application From THL t100s Stock .
Althought i do not thing it will help your situation .
to install this you have to take any root explorer
then go system/app and paste it in there set permissions to
owner READ WRITE
group READ
global READ
Then Restart The Phone And It Should Appear . if you need any more help i will try to help you !
Good Luck !
Click to expand...
Click to collapse
Hi Vinylakos,
thx for your efforts, I found out, that the gallery2.apk is in place and has the correct permissions. Now I suspect, that I compromised the driver of my camera by flashing a firmware that was too new. Now since I don't know which camera is built in my phone, I cannot flash the correct driver.
Hardware : MT6592
Model : thl T100S
Build number : thl_T100S.A2.JB9.FHD.EN.16P256.IMX135.MT6592GWP.20131211
Build date UTC : 20131211-210923
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V21, 2013/11/22 15:10
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Dec 11 16:02:30 EST 2013
Uboot build v : ----- sollte root shell
LCD Driver IC : 0-nt35596_ykl_LT050ANRP131A_AUO_dsi_4_vdo_fhd
The output of Droidtools gives me only this. As you can see, the Uboot version can not be fetched, so maybe the driver file for the camera is in the uboot and I accidentally flashed the wrong one.:cyclops:. I ordered my phone on January 10th and received it on 13th. Maybe you have the same phone version and can check out which uboot build your phone uses?
THX Buster

t200
should this work with t200?

vinylakos said:
How To Install TWRP 2.5.0.0 Recovery For THL T100s
After Rooting Your Device Its Time For A Custom Recovery​
Click to expand...
Click to collapse
TWRP does not work for me, touch function is messed up. I touch one button, it clicks on something completely different.​

tweetycontrabajo said:
should this work with t200?
Click to expand...
Click to collapse
I am pretty sure that this IS NOT WORKING on T200 ...

zdravke said:
TWRP does not work for me, touch function is messed up. I touch one button, it clicks on something completely different.
Click to expand...
Click to collapse
strange .... currently i am on 02.01.14 firmware its working just fine for me ... what firmware you phone has ?

buster125 said:
Hi Vinylakos,
thx for your efforts, I found out, that the gallery2.apk is in place and has the correct permissions. Now I suspect, that I compromised the driver of my camera by flashing a firmware that was too new. Now since I don't know which camera is built in my phone, I cannot flash the correct driver.
Hardware : MT6592
Model : thl T100S
Build number : thl_T100S.A2.JB9.FHD.EN.16P256.IMX135.MT6592GWP.20131211
Build date UTC : 20131211-210923
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V21, 2013/11/22 15:10
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Dec 11 16:02:30 EST 2013
Uboot build v : ----- sollte root shell
LCD Driver IC : 0-nt35596_ykl_LT050ANRP131A_AUO_dsi_4_vdo_fhd
The output of Droidtools gives me only this. As you can see, the Uboot version can not be fetched, so maybe the driver file for the camera is in the uboot and I accidentally flashed the wrong one.:cyclops:. I ordered my phone on January 10th and received it on 13th. Maybe you have the same phone version and can check out which uboot build your phone uses?
THX Buster
Click to expand...
Click to collapse
This is the ouput of Droid Tools From MyPhone
Hardware : MT6592
Model : thl T100S
Build number : thl_T100S.A2.JB9.FHD.EN.16P256.IMX135.MT6592GW.20140102
Build date UTC : 20140102-204354
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V21, 2013/11/22 14:39
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jan 2 15:28:01 EST 2014
Uboot build v : ----- should be root shell
LCD Driver IC : 0-nt35596_ykl_LT050ANRP131A_AUO_dsi_4_vdo_fhd

you are right.
It doesn't.

vinylakos said:
strange .... currently i am on 02.01.14 firmware its working just fine for me ... what firmware you phone has ?
Click to expand...
Click to collapse
I am on 17.01.14.
Sent from my thl T100S using xda app-developers app

Hi vinylakos would you be willing to upload a complete backup of your Firmware? Maybe it would help?
Sent from my thl T100S using xda app-developers app

Can someone post screenshot of settings>location services. I might have erased my EPO settings while deleting some chinese apps with TB, as I cannot find them anywhere. I also cannot find my stock rom to reflash, which is thl_T100S.A2.JB9.FHD.EN.16P256.IMX135.MT6592GW.20140117, so I would be grateful if someone can post a link to it.