Database Info

So, who has -not- had problems with their Transformer?

I bought a Transformer yesterday, and I have some pretty severe backlight bleed. I'm either going to exchange or return it tonight.
I understand that people with problems with their device will be much more vocal than people who haven't run into any issues, but the number of posts I've seen talking about display or speaker issues is kind of worrying me, especially when I can go to the Thrive forum and see zero or near zero topics about hardware issues. Does anyone here have a Transformer with no problems? Or do they all have some issue and should I look at a different tablet?
Sent from my ADR6300 using XDA App

No issues whatsoever with mine, although I haven't actually went looking for light bleed. Certainly, I've not noticed it in normal use, which is the only place it would bother me.

raptir said:
I bought a Transformer yesterday, and I have some pretty severe backlight bleed. I'm either going to exchange or return it tonight.
I understand that people with problems with their device will be much more vocal than people who haven't run into any issues, but the number of posts I've seen talking about display or speaker issues is kind of worrying me, especially when I can go to the Thrive forum and see zero or near zero topics about hardware issues. Does anyone here have a Transformer with no problems? Or do they all have some issue and should I look at a different tablet?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I have small light-bleed but it's only visible on a completely black screen with the brightness turned right up and the lights in the room switched off. That's not my normal use case so it doesn't bother me.

I have my Transformer since 2 months now. The hardware is perfect, there is no Lightbleed, no cracking, no dust under the screen and the speakers are o.k. One little problem is Honeycomb, it is not so good as it could be but its getting better with every update. Rooting was no problem and there are no issues when flashing other roms. Last week i bought the dock and there is also nothing wrong with it.
I am very happy with my new Transformer and dont whant to be without it anymore.
Asus Transformer: B5O
Dock: B6O
Sorry for my bad english i am from Austria
Sent from my Transformer TF101 using Tapatalk

i Have light bleed over the charging port..but that's insignificant ..but my volume rocker JUST got stuck like 20 min ago..already put my RMA with asus..out side of that..it's no issues

Haven't got any problems, though i haven't taken my transformer into a darkroom with a dark jpeg and turned the brightness up to test it!!!!!
A big believer in realism!
My wifi works perfectly
ADW EX works perfectly
Opera Browser works perfectly
But i also don't believe in new automatically equals better, so i haven't installed 3.2.
Wouldn't no about browser typing lag, as i'm the slowest freakin typist ever

I've had no issues with my tablet.
I have just RMAd the dock, as it was a B50 and had the power drain issue, but the tablet on it's own has been great.

very minimal light bleed, but nothing major.
Out of curiosity, hows the ROM dev over with the Thrive? Im wondering if there is more development over there than there is with the TF..
And if so, if having several Roms/mods to play with, keep user more content; So much so, that they overlook minor details..
Maybe were just bored over here in TF world

I have a b60 transformer and keyboard dock and I am very happy with all. I had a small spec of plastic in the screen, flicked screen with my finger and now it has gone and never returned.
Not seen any light bleed and have no problems with build quality.

I only had the creak before, until I learned to look for the light bleed in the dark. It's not that bad, but it feels horrible when you look for it,

Certainly not me ;-) After 5 weeks trying to find a tablet and dock to actually purchase, I bought the only one I could find - a 32 GB version. Why the heck I didn't just give up and wait for the next generation, I'll never know.
Significant light bleed but that doesn't really bother me. But then I discovered the dock battery draining issue with my turned off tablet and that really started to bother me. Then the volume up key on the tablet stopped working and that kind of annoyed me. Then the charger stopped charging both the dock and the tablet and that was end of my using it altogether ... except that somehow the charger started working again on the tablet (and not the dock) so I could use it again. But now it's stopped charging the tablet once again.
I know I have to RMA this ****. Still have to find the receipts and packaging. Maybe I can ship it along with my Asus P8P67 Deluxe motherboard which never worked right from day 1 and has caused me endless grief. Yeah, Asus is pretty much my least favourite company right now...

I love my transformer.
There was some light bleeding at the bottom by the buttons but for some reason the other day it vanished. I have installed the Asus case that has the tapered edge and flap. Maybe the pressure is fixing it.
That with Prime 1.6, the thing is a beast. I'm out of town for work over the next 2 weeks. No reboots or weirdness. I have my PC laptop and my LG G2x setup with wifi sharing so my TF is grabbing internet from one of those devices.
It just works so good I'm afraid to flash it to a 3.2 rom.
I found thumb keyboard better over SwiftKey X and I'm flying. The Office suite allows me to check all my work related documents on the go and has been a lifesaver.
Asus Transformer 3.1 pwnd
www.MiiWiiChat.com
www.SnapSiteAdmins.com

Minor issues...
I have a little bit of light bleed, but it's only noticeable on black backgrounds, with dim ambient light, at certain angles. The speakers aren't as loud as I'd like, but I don't see how speakers that small could be louder. Overall I'm very pleased with mine, especially considering it's what, half as thick as the Thrive?

Not half as thick, but it does feel a lot thinner. It's because Asus designed the tablet to slant from thick (in the center) to thin (in the edge). It's so pretty .

I have problems with the tf, and not only with one unit, because now I am using the third unit (replaced the two previous).
The first was countinually rebooting when suspended (may be software, but used a nandroid of it with the second and no problem)
The second has light bleed and the upper part of the touch screen was bad.
With the third unit has sound balance problem, but I can live with it.
Conclusion
The quality control is bad, but I like this tablet.
Sorry for my english

No issues, I haven't really looked to see if I could find light bleed, but I love this thing

on my second tf
my first one quit charging after 4 days. No keyboard dock.
The one I have now has more light bleed than my first one. That one was a B60, current one is a B50.

No issues to report, although I have not checked on the battery drain issue with the dock (B5O). Still I really like this tablet and use it for work.

No problem here. Running Prime 1.7

Just checked for light leak. took a picture in a black room with brightness all the way up and on the left lower side i noticed it.
been mashing the power and volume buttons all day to see if i can break it(still within 30 days). No issues yet.
b60 purchased last week

[Q] Build Quality

I have been reading reviews on Best Buy and Amazon, and the biggest complaint seems to be the build quality of this tablet. I was wondering what everyone's experience with it is. Does the device feel as flimsy and plasticky as I've been hearing? Thanks for any responses!

Depends on if you get a good one or bad one. Most people with a flimsy-feeling device end up having problems.
As for my experience with build quality, I'm on my 3rd TF300. The first one had a dead pixel and some light bleed but was otherwise perfect, and the second one felt a little flimsy; it ended up having a bad touscreen. So far, number 3 is flawless after a week. *knocks on wood*

Mine seems fine.The plastic is sturdy and I have no complaints. there is a tiny bit of lightbleed in the lower left corner of mine but its so small that I never notice it.
Sent from my ASUS Transformer Pad TF300T

i get a little light bleed but i never notice its that small and mine feels really sturdy and for me the thickness is just right so it dont cut int your hands

See my earlier post on the subject.
http://forum.xda-developers.com/showthread.php?p=26147164
Sent from my SCH-I510 using XDA

Took back my first one. Had the normal amount of light bleed, but one spot was exceedingly bright compared to the rest of the screen, very irritating. It also needed the case snapped back into place in a few places around the outside edges.
The second one had light bleed, but only visible in very dark rooms. No other problems.

EndlessDissent said:
Depends on if you get a good one or bad one. Most people with a flimsy-feeling device end up having problems.
As for my experience with build quality, I'm on my 3rd TF300. The first one had a dead pixel and some light bleed but was otherwise perfect, and the second one felt a little flimsy; it ended up having a bad touscreen. So far, number 3 is flawless after a week. *knocks on wood*
Click to expand...
Click to collapse
Not sure if I have a bad touchscreen or not but in the browser when pressing links or selecting them it gets them wrong a lot? More so in Chrome so far.
The tablet is laggy and freezes in the browser at times as well? Anyone else had this?

mark.m.moran said:
Not sure if I have a bad touchscreen or not but in the browser when pressing links or selecting them it gets them wrong a lot? More so in Chrome so far.
The tablet is laggy and freezes in the browser at times as well? Anyone else had this?
Click to expand...
Click to collapse
Try a restore? I want one of these, but the thing holding me back is the "hardend" glass. I wonder if it is actually strong and somewhat compares to gorrilla.

Thanks so much for your input guys! After reading your comments, I'm definitely going to get one! Now I can't wait until Wednesday when I get paid!

i honestly cant fault this tab mate and if you root and overclock it its mind numbingly fast all games worksoooo good and browsing is great aswell
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

I have owned a dozen or more tablets and so far I am enjoying this one very much. Of course plastic is plastic and can't compare to the metal versions, but unless you are using it to play ping pong, it is just fine. The textured back gives it a different feel than most, hides the fingerprints and definately had character. As far as performance, it is very nice. It is the smoothest running tablet I have had next to my Galaxy Tab 10.1. The speed with the Quad Core is noticeable and I have attained Quadrant scores of 5400 compared to my overclocked Galaxy at 3800. Well worth the money.

Build quality question

Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.

orangeirwin said:
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
Click to expand...
Click to collapse
I have this issue too. Both the right hand side and left hand side, and a few additional places (7 areas in total). When I closed pad on the dock station a crack formed between one of these two weak areas where screen is loose, and all points to glass cracking exactly because the strains were not supported by chassis. And I closed it the same way I closed it a few other times before (only owned it for about a month).
If you need more description in pictures, there's a thread about defects (it lists clicking/loose screen as one of defects by the way) in this same forum.
I hope that my crack is just an isolated case. This is only my personal opinion based on experience I had, but I would keep bothering the wherever you got your tablet until they give you one without loose screen.

orangeirwin said:
Just a quick question for other TF700 owners. I originally bought a Prime and had the bad wifi issues, exchanged it for another with no improvement so I held out for the Infinity. I now have my Infinity and the screen is loose on the right hand side about 2/3 of the way down. If you press it you can feel the give and hear a popping sound. I'm just curious if this is an isolated incident or if a loose screen an issue with the Infinity. I love the tablet and honestly have no clue what I would get instead but, for $500 I expect better build quality.
Click to expand...
Click to collapse
Mines clicking in the exact same spot you described. Doesn't seem to be getting worse, and if it doesn't I don't think it will bother me that much. But still, for the money we're paying its inexcusable.
Sent from my Samsung Galaxy S II Epic 4G Touch.

Same clicking above the microSD slot and on the opposite side -> same location. But it does not really bother me.

Mine clicks a little right above the dock port on the bottom.
I'm not considering it a problem at this point.

BPhoenix said:
I have this issue too. Both the right hand side and left hand side, and a few additional places (7 areas in total). When I closed pad on the dock station a crack formed between one of these two weak areas where screen is loose, and all points to glass cracking exactly because the strains were not supported by chassis. And I closed it the same way I closed it a few other times before (only owned it for about a month).
If you need more description in pictures, there's a thread about defects (it lists clicking/loose screen as one of defects by the way) in this same forum.
I hope that my crack is just an isolated case. This is only my personal opinion based on experience I had, but I would keep bothering the wherever you got your tablet until they give you one without loose screen.
Click to expand...
Click to collapse
In the Nexus 7 forum there were a number of complaints about the screen lifting, and most were found to be caused by screws that were over tightened below the areas of lift. The Nexus 7 back is easy to remove, and I wouldn't suggest doing this with the TF700, but they are both recent ASUS devices and there seems to be a possibility they could suffer from the same issue. By the way. it turns out that only a small % of Nexus 7 owners experienced screen lift, but some had multiple devices with this issue. Mine is flawless, as are the vast majority. I think that must be true for the TF700 as well. Mine is perfect, too.

Just checked. Mine has a VERY slight, not quite popping, but like a small"tic" when pressed by SD slot. Had to listen really close to hear it. My prime was nothing but problems, Wi-Fi weak, GPS totally worthless, and camera was unacceptably bad, grainy quality pics.
My Infinity is everything prime was not. Extremely pleased with it. Only problem I've noticed is I/O lag. And hopefully, that will be fixed with jelly bean.
One other thing, mine WOULD NOT OTA update. Had to d load to micro card.
Other than that, I LOVE MY INFINITY!

I don't see any issues with the building quality. I have not struggled to find flaws . my only complaint is lag and performance. Hopefully these are fixable sw issues that the jb update will fix or someone will create a good ROM to unleash this tablet.
Sent from my Galaxy Nexus using Tapatalk 2

Build quality for mine is terrific. No complaints at all at this point.
Sitting in the airport lounge right now where my TF201 didn't get a WiFi signal. TF700 has -50dB at 54Mbps.
Build quality and performance are exactly what I would expect for a premium priced tablet.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

My first one was perfect physically, but I had to return it. My second one has the popping on the left and there's noticeable give on the bottom, right above the left keyboard dock slot (that is, you can push the screen into the casing). I'm guessing its not a big deal since there are others who have reported similar things.

I have the popping sound when applying pressure to the display on the right side, kind of where the speaker sits. I used to have a slight bulge / screen seperation above the microSD slot, but that completely went away after I left my Infinity lieing in the sun for a few hours (not on purpose, I just forgot about it and that thing got HOT).

I hope this is an isolated case (though my "popping" wasn't so severe, I didn't pay attention to it either!), but just so you know, this is what happened when I normally (no extra force) closed it with my dock station.
I initially ignored the problem too. So be careful when handling it around dock station (if I'm right, it's only bending which is created by dock station that can do this, simply holding it in hand or closing dock station by holding it in middle will not cause any cracks or damage).

build quality issues still present

I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.

yeah
esoxx said:
I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.
Click to expand...
Click to collapse
I bought one off amazon everything was great, then the corner of the screen start to click when I picked it up. :/ it was so perfect..............................................................................

Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.

I agree with theanarchist that this is the same thread that we've all seen. But I also don't think most peoples tabs Are perfect. Some (like me) are still trying to find a perfect one And some have just accepted what they have and have given up. Others (like you) managed to get a perfect one.
Sent from my Galaxy Nexus using xda app-developers app

Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.

xRevilatioNx said:
Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.
Click to expand...
Click to collapse
Mine's not perfect, clicking near the hdmi port and you can click it from a good portion up towards the middle of the screen. I personally gave up on Asus, though hearing that there are people that have indeed perfect ones makes me wish I had exchanged it. I was hesitant because I had already returned a tf300 (screen issue) and then later the Prime that I had replaced the tf300 with. I had only returned the Prime to get the tf700, as I was pretty frustrated I couldn't get the gps to work EVEN with the dongle Asus sent me. I didn't have any wifi issues really nor any screen clicking issues with the Prime and though I like the infinity the screen clicking annoys me. Wondering if I should rma it directly to them, just don't want to get a different tab back or been in a worse situation as a result.

TheAnarchist1 said:
Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.
Click to expand...
Click to collapse
There was an earlier thread that theorized that the build issues were being addressed in the more recently built devices. I posted to show that even with the more recent 80 serial number devices, the same issues are present on at least a percentage of tf700s.

I certainly have no agenda. I'm on my second Infinity, which will unfortunately also be going back. The first one had some extreme screen separation on the right hand side. It was an C06 serial number. The one I'm on now, my second is a C80 serial number. The screen is good, with just a slight clicking in one spot on the right hand side. I'd live with it. However the light leaking out onto the screen along the bottom and right side from the LEDs is very very noticible.
I won't give up. I really love everything about the TF700 except for the build quality issues that I have experienced. I think the OP has a valid point in saying that the issues are not fixed yet. When my second unit came, I was psyched to see the serial number on the box said C80. I was very disappointed that it too has issues.

I think...
I think the screen seperation can be because of the humidity. Where do u live?

killerdan56 said:
I think the screen seperation can be because of the humidity. Where do u live?
Click to expand...
Click to collapse
I don't think it's humidity. I live on the west coast of the US. Pretty dry here. I noticed a curve in the glass along the top of the screen as soon as I took it out of the box and removed the skin/wrapper. It's noticeably bowed out in the middle of that edge.

I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.

effezie said:
I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.
Click to expand...
Click to collapse
Glad to hear that. Hopefully, 3rd time will be the charm. I really do LOVE this tablet, I just want one that's solidly built and works.

Agreed. I don't see how humidity is going to affect Corning's Gorilla Glass 2. Seriously don't see this being a factor at all.
I suppose I am one of the luck ones as well, no discernable bleeding edge light and completely flat screen. Of course, I bought the 64GB model from BB online, and it already have .26 on it when it arrived.

I too just returned my c8 version today that suffered from light bleed, mushy/sticky power and volume buttons, separating screen which also had sharp 90 edges. The one I just picked up is a night and difference from the first one. This one is a c9 version and other than a little light bleed the construction is solid. It doesn't even appear to be the same tablet....its like the first one was a cheap knock off. Another thing I am noticing with this new one is that the speed of touch feedback is so much faster than the C8.
I did decide to purchase the extended warranty this time around...my experience with the prime has left me jaded and there is no way I'm going to be left holding a dud.
With that said, I suggest if possible to keep on returning them until you find a good one...they do exist!
If Asus can't be persistent with their perfection...Be persistent with the returns!
F me! Just noticed this one is creaking like an old rocking chair, its on the left side by the hdmi port.

Today, I swapped out my first C7 after owning it for a week and received a C8 as a replacement. It amazes me the differences between the two.
For my particular devices, the differences were:
C7 pros: The construction was very solid. I kept reading horror stories about screen lift, creaking, etc. and mine felt solid like a tank. No light bleed issues either.
C7 cons: It suffered from severe I/O issues. Trying to download something from the market would grind things to a halt until the download and install finished. The Browser lagged a bit as well........as did moving around the launcher or clearing items from the recents menu . I returned it because there was a spec of dust under the screen which just really bothered me.
C8 pros: It feels like they put better quality internals in this one! There have been none of the i/o issues, lag, or stutters. Everything is very responsive and snappy. From a software usability standpoint, this feels like a completely new device.
C8 cons: The physical build quality is definitely not as high as the first. There are spots around the edges of the glass that feel "squishy". There is also a bit more lightbeed but i would not call it bad by any means.
For now, I am going to keep the C8 because the performance difference alone is worth it. The minor physical build quality issues aren't bothering me enough yet to risk giving up the performance.
One trend I seem to have noticed after reading all these reviews is that the build date does not seem to have much correlation with physical build quality. However, it does seem that more recent models may be using higher quality internal components contributing to noticeable performance gain.
These are just my observations.

[Q] Ghost Touch issues fix?

I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.

Tunameltsalad said:
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Click to expand...
Click to collapse
Same thing happened to my brother's tf300t. He returned it as defective, but I guess you could replace the digitizer. As far as I saw, it was a hardware problem, so it requires a hardware fix. Sorry

cmendonc2 said:
Same thing happened to my brother's tf300t. He returned it as defective
Click to expand...
Click to collapse
Was it through amazon? Do you know if he unlocked it?

Tunameltsalad said:
Was it through amazon? Do you know if he unlocked it?
Click to expand...
Click to collapse
Yes it was through amazon. He had unlocked it and installed TWRP and CROM or CM i dont remember.

Tunameltsalad said:
I bought this tablet off Amazon's Warehouse Deals. It came to me dinged and scratched up, but operable. I noticed the touch screen was a little off and would report false touches occasionally, but I didn't think it was anything to worry about. Like a kid in a candy store, I raced to get a new ROM so I could optimize this thing. In the process I unlocked the bootloader, rooted and installed PACman ROM. Ghost touches disappeared--gone for like 3 whole days. I'm ecstatic, and falling madly in love with this tablet. Then I notice the ghost touches coming back after the 5th day I have had it. Now its showing about 3 ghost touches almost constantly in one vertical line (in landscape) on the right side of the screen. Pretty much totally inoperable. I have scoured all ends of google, and most of the time it spits me out here, searching thread after thread of nothing but "RMA it". My questions are:
Is there any fix to this besides shelling out money for a new digitizer? Is that the general consensus that the digitizer is the root of the problem? I know I'm able to return the product, but does anyone know if Amazon is going to give me grief over an unlocked product that was a scratch-and-dent deal anyway? Any way I can re-lock the device? I've seen multiple threads with replies saying "lol didn't you read the blah blah? no way bro", but these were posted a couple months ago. Maybe something new has come up. I guess I just feel sorta rooked because I bought a defective piece of hardware, and now I can't get a refund just because I modified the software.
Click to expand...
Click to collapse
I got a similar situation in the last two weeks. The problem I have is that my TF300T is keeping rebooting by itself. I've googled it and people say most likely it's a hardware issue. I am trying to find a way to see if the device can be reset to factory condition so that I can return it for repair. Looks like we are on a same boat. Hopefully I can find a way to do so.

Just an update on my issue, in case anyone else stumbles across this particular problem. So far I have gone almost a week with no ghost touches. I popped off the back of the device (three guitar picks did the trick), and disconnected the digitizer ribbon cables and reseated them. Problem vanished. My best guess is that the keyboard dock puts odd pressure on the device. That mixed with rough handling is bound to cause some problems.
The problem I have is that my TF300T is keeping rebooting by itself. I've googled it and people say most likely it's a hardware issue
Click to expand...
Click to collapse
It could be the power button is jammed? I know mine is really touchy (all I do is tap it with my stylus and screen turns on/off. Good luck!
Sent from my TF300T using xda app-developers app

Tunameltsalad said:
Just an update on my issue, in case anyone else stumbles across this particular problem. So far I have gone almost a week with no ghost touches. I popped off the back of the device (three guitar picks did the trick), and disconnected the digitizer ribbon cables and reseated them. Problem vanished. My best guess is that the keyboard dock puts odd pressure on the device. That mixed with rough handling is bound to cause some problems.
Click to expand...
Click to collapse
Thank you. I just got mine from Groupon as refurbed.. (they did a ****ty job, apparently) Ghost issue about 2 days after getting it out of the box. By then already unlocked and flashed CWM.. sigh.
I'll try your fix tonight. Any chance there is an image of the right connector/ribbon?

Hopefully the image quality isnt too bad. I took an exacto knife and gently pried up the black foam squares, set them aside and worked my magic. Hope this helps. Just be careful with the ribbon cable (duh). Hope this helps!
Sent from my TF300T using XDA Premium 4 mobile app

Tunameltsalad said:
Hopefully the image quality isnt too bad. I took an exacto knife and gently pried up the black foam squares, set them aside and worked my magic. Hope this helps. Just be careful with the ribbon cable (duh). Hope this helps!
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you! I'll try this adventure later this week.

Did this today.. So far, 20 mins on it, and no issues. Typically took about 5-7 mins before. So, crossing my fingers this is gone.
THANK YOU! I can go back to enjoying my tablet

Im in the same boat with this Ghost Touches Issues, and its getting worse, sometimes im working at college and this Ghost appears and the tablet gets almost unusable, Only the Keyboard Dock saves me.
Please if you can give me more detailed instructions i think i would be brave enought to do this surgery to my tf300t, merry christmas!

elestudiante said:
Im in the same boat with this Ghost Touches Issues, and its getting worse, sometimes im working at college and this Ghost appears and the tablet gets almost unusable, Only the Keyboard Dock saves me.
Please if you can give me more detailed instructions i think i would be brave enought to do this surgery to my tf300t, merry christmas!
Click to expand...
Click to collapse
i just noticed that when having a ghost touches attack, if i put pressure con the tablet, lime trying to bend it, the touches vanish.

I also have the ghost touches but it seems to only happen when the screen is dirty. As soon as I clean it off, they go away. Would a good screen protector help with that? I may go ahead and try taking off the back and messing with it.
Sent from my AOKP Galaxy S4

I thought mine was fixed, but doesnt seem to be. I technically didnt remove the connectors.. I was nervous, they are WAY fragile. I simply unlocked and pressed firmly on them to attempt to reseat them..
Problem seemed to go away until I used Chrome. Chrome is what seems to trigger odd behaviors for me. I may try another browser and see if it still happens.

I've been dealing with this off and on for about 8 months; asus HAS to be aware of it as my tab has been back twice for this issue (out of warranty now) and I take advantage of their complaint form every month or so.
Here's what I've been working off of (based on personal experience/experimentation):
Re-seating the cables might help for a day or less, but isn't a permanent fix. I even went as far as strategic pieces of tape to hold the flex cables in place and tape across the connectors to encourage them to stay closed.
The first time I popped the back off the larger of the three flexes (with the silver wrap) had partially worked out of the connector on the driver board. Re-seated it and problem disappeared for about a day.
The large copper heat spreader was basically spot contacting the CPU and really wasn't touching the smaller ancillary chips (unit had been running warm for a few months, thought that might make things wonky). I pressed heat shield back down to ensure adhesion, and slightly molded the copper around each chip. Ghost touch gone for two days, unit way cooler running than before.
Here's the interesting one to me. Tonight I noticed that even just hovering my finger close to the screen I can get the 'touch dot' to show; this got me thinking about static. I held the tab in a way that at least one finger of one hand was touching the screen, like towards an edge (out of the active area) while using the other hand to touch the screen. Seemed like one hand was grounding the screen, like a charge couldn't dissipate from the surface.
Isn't this a "capacitive touch' screen? Could it be a matter of grounding?

I too purchased this tablet and dock from Groupon about 4 weeks ago or so as a manufacture refurb. My tablet does the same thing. After about an hour or so use most of the time it starts randomly acting like the screen is being touched. And it appears to only be in the upper right corner area (kinda where the lock screen pattern show up when you unlock it) in landscape mode. Sometimes it may take a little longer of use before it happens. It happens regardless if the dock is plugged in or not. I have figured that if I lock the screen and wait a few seconds and then unlock it. The ghost touches are gone for a while. I first began thinking it may have been a OS issue and hough about rooting and putting a custom rom on it. But from what I have seen on the web it doesnt seem to matter whether its rooted or not. So should I RMA it back or has any one had permenant luck with reseating the cable?
Thanks

ItsDuckie said:
I too purchased this tablet and dock from Groupon about 4 weeks ago or so as a manufacture refurb. My tablet does the same thing. After about an hour or so use most of the time it starts randomly acting like the screen is being touched. And it appears to only be in the upper right corner area (kinda where the lock screen pattern show up when you unlock it) in landscape mode. Sometimes it may take a little longer of use before it happens. It happens regardless if the dock is plugged in or not. I have figured that if I lock the screen and wait a few seconds and then unlock it. The ghost touches are gone for a while. I first began thinking it may have been a OS issue and hough about rooting and putting a custom rom on it. But from what I have seen on the web it doesnt seem to matter whether its rooted or not. So should I RMA it back or has any one had permenant luck with reseating the cable?
Thanks
Click to expand...
Click to collapse
I'd try reseating the ribbons. I kind of doubt it would solve the problem since it's a refurbished with a latent defect. Bad ribbons would strike at random but do not wait for a while before acting up. Look at the glass surface under a magnifying glass and bright light. Hairline cracks cause this after the tab heats up, but you can't always detect them. RMA would be the safe option unless you're really pressed for time.

Ghost touches are back. Noticed I had alot of them when my storage was full. Used a previous recovery (same ROM, just earlier date with less junk installed) and it cut down the frequency of them happening. This is so weird.

I had those ghost touches when 4.2 roms started (CM and AOKP and all of the rest of them. Then someone, I don't remember who had compiled rom with decreased touchscreen sensitivity and ghosting was gone. I think they started with PAC or AOKP, I really don't remember.
Then I went to 4.3 and 4.4 roms and I didn't have one single ghost touch since then. I do noticed sometimes when I hover finger over screen it is registered as touch, but ghosting by itself didn't occur on those roms.

one cent fix
I have an ugly, but effective solution working on my pad right now. It has been in place for about three or four months.
Holding in landscape mode, pulled the bottom left corner back slightly and inserted a penny between the back and the lcd. This put enough torque on the screen to kill all of the ghost touches and it still fits into the keyboard dock. There is an ugly gap where the penny is, but it is now fully functional.
Hope this helps some of you