RUU help - Am i doing this right??? EVO 4G - Android Software/Hacking General [Developers Only]

Trying to get back to out of the box stock software. Tried a RUU and still hasn't gone completely stock. I still have antenna signal (roaming issues)...basically can't get signal when I used to get full. It seems to be roaming on Verizon towers. Also, can't type certain areas of the screen or the letter I press does not input.
I researched and on stock Froyo 2.2 and running 3.70 I think I am suppose to be on 1.90 PRI instead of what I currently have downloaded PRI 2.15. Could that be the issue? If so, how do I downgrade properly to 1.90? I heard 1.77 has better battery life would that be a better alternative? Thanks for any help u guys give....I have been on this mystery for almost two weeks
EVO 4G S-OFF
ANDROID VERSION: 2.2
BASEBAND VERSION: 2.15.00.12.19
KERNEL VERSION: [email protected] #15
PRI VERSION: 2.33_003
PRL VERSION: 60690
RADIO-2.15.00.11.19
HBOOT-6.16.1002
SOFTWARE NUMBER: 3.70.651.1

What Device? OG EVO 4G ?

old skool EVO 4G.
I was given advice to do these two methods: I Did the link for the current radios and experiencing same problems. I guess I'll do the Mikg3.11 full swipe next. If that does't work I do not know what to do next.
here is the link for the current radios:
CM-EVO_Radio-2.15.00.12.19_PRI-2.33_WiMax_NV.zip
and here is the link to mikg3.11 which is waaaaaay better then stock:
MikG v3.11 [3/9/2012] FULL SWIPE
prboy1969 said:
What Device? OG EVO 4G ?
Click to expand...
Click to collapse

Where the last EVO 4G ended up having antenna probs and dead pixels. Luckily, I got myself a used EVO 4G but it has the Cyanogenmod 7 rom on it and I cannot activate it to my pre-existing Sprint line.
Talked to Sprint customer service and they said that it needs to go back to stock program so that the command prompts to activate the phone will work.
I used flashed these files: CM-EVO_Radio-2.15.00.12.19_PRI-2.33_WiMax_NV.zip and PC36IMG and it did not get it back to the stock rom.
What am I doing wrong?
Android version: 2.3.7
Baseband Version: 2.15.00.12.19
Kernel Version: [email protected]#1
CPU: ARMv7 Processor rev 2 (v71)
Build: GWK74
PRL: 60681
HBOOT: 0.97.000
SHIP S-OFF
RADIO: 2.15.00.12.19

See my reply to your other post you made in this forum. Also, you might get a better response next time by posting in the EVO 4G section
Sent using my HTC EVO 4G and a magic wand

Related

Mytouch 3g rooting....

I know this topic is ALL over this forum and about a thousand others. That is why it is so confusing.
I am having issues when trying to "root".
I have tried the flashrec 1 click method. I get an erro "main version is older" Updated failed.
So I am hoping someone can let me know WTF is going on and which is the best process for my handset.
Here is my handset specs:
T-Mobile mytouch 3G
Firmware Version: 1.6
Baseband Version: 62.50s.20.17u_2.2219.26i
Kernel Version: 2.6.29-00479-g3c7df37
android-buildapa26#19
Build Number: DRC92
Board Version: 32B
I know this process is not too difficult, but I just seem to be getting lost in all of the different ways of doing this....
Im also seeing blog posts about not being able to root a 1.6 yet, and that you have to downgrade to 1.5???
TIA
You cannot one click root if you are on 1.6. That is the issue that you are running into. You need to downgrade to 1.5, then you can one click root. It says it on all of the one click tutorials...

[Q] Could I flash 1.35.401.1 to 1.35.401.1 Euro ?

I don't know what my brother did with the rooting and technical stuff but I want to go back to stock rom/firmware something to make something that I could return it to the store for a fix. Screen crack.
I'm don't know much about android process because I came from IOS.
Should I install the radio to get back to full stock and unroot it in hboot: RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed
Anyone have anyway to do it? Like a tutorial on how to do it so I could understand it a lot better.
My info:
Phone: HTC Sensation 4g running on coredroid 2.3.3
Network: US Tmobile
build number 1.35.401.1
Baseband version: 10.42.9007.00P_10.11.9007.15_M.
S-off.
Thanks.

nexus s 4g terrible reception and wifi

Hi all, i just got a nexus S 4g with poor reception and wifi where as my previous phone (optimus S) would get great reception in the same spot. I'm aware sprint pushed an update this july that addressed these issues (GRJ90) but my phone is on the lastest GWK74. any clues?
my phone:
nexus S 4g sprint
STOCK
GWK74
baseband: D720SPRKE1
PRL: 60680
kernel: 2.6.35.7-gf5f63ef
[email protected] #1
i'm willing to root and install another rom if it'll fix this issue.
thanks for any info!
maybe its a rom issue... root your phone and try cm7 stable 7.0.3 for ns 4g.. or try searching for a better radio that u can flash in your 4g..

[Q] HTC Inspire 4G Data Plan Not Working

I rooted my HTC Inspire 4G and after rooting everything seems to be working normal except the data plan.
The phone would never connect to the 3G/ 4G data plan. Below are the phone details.
Android Version: 2.2.1
Baseband Version: 12.28b.60.140eU_26.03.12.26_M
Kernel Version : 2.6.32.21-g3c08447
[email protected] #1
Software Number: Inspired DHD AFR001 (FRG83D)
Any help is appreciated..
Data plan not working
Did you ever find out how to solve it?
I rooted my device and my data plan does not work either i don´t know how to activate it
Pls help
sainathparuchuri said:
I rooted my HTC Inspire 4G and after rooting everything seems to be working normal except the data plan.
The phone would never connect to the 3G/ 4G data plan. Below are the phone details.
Android Version: 2.2.1
Baseband Version: 12.28b.60.140eU_26.03.12.26_M
Kernel Version : 2.6.32.21-g3c08447
[email protected] #1
Software Number: Inspired DHD AFR001 (FRG83D)
Any help is appreciated..
Click to expand...
Click to collapse
Did you install a new rom?

LG Optimus P999 issues

Hi,
I have had the LG Optimus P999 for almost a year, and I haven't bothered to update it yet(2.2.2). I got it from WindMobile, and I was wondering if by following this vid I could update it to 2.3.3 successively. I want to install a custom ROM, but they all seem to require at least 2.3.3.
Right now it is unlocked and rooted, also I am using a Fido SIM card.
Any thoughts?
Anyone?!
My P999 was also from wind and I did not update the firmwire to 2.3.3. I just installed clockwork mod and flashed in a newer MIUI rom. BTW how are you able to use a Fido Sim card on a wind mobile version of the Lg optimus 2x
idropkickyou said:
My P999 was also from wind and I did not update the firmwire to 2.3.3. I just installed clockwork mod and flashed in a newer MIUI rom. BTW how are you able to use a Fido Sim card on a wind mobile version of the Lg optimus 2x
Click to expand...
Click to collapse
Well to my understanding(which is limited) FIDO uses GMS on frequency 850MHz and 1900MHz, which this phone supports. But I hear that to get 3G on this phone I need to be on WindMobile or T-Mobile. I have data with FIDO and it shows at 2G (with two little arrows going up and down). Besides that I find it stupid the the LG Optimus 2X in Canada it is actually a LG Optimus G2X in the states (from what I have gathered).Anyways, how did you do the whole proccess of installing a new ROM, did you follow something similar to this ?
Idk if this would help, but here you go.
Model number: LG-P999
Android version: 2.2.2
Baseband version: M6600A-SCAUTNZ-2.0.9720T 1 [JUN 05, 2011 04:00:00] MP: TRULGE_08.09.02R_MDM
Kernel version: 2.6.32.9
Build number: FRG83G
Software Version: LG-P999-AWC-V11h
mald55 said:
Idk if this would help, but here you go.
Model number: LG-P999
Android version: 2.2.2
Baseband version: M6600A-SCAUTNZ-2.0.9720T 1 [JUN 05, 2011 04:00:00] MP: TRULGE_08.09.02R_MDM
Kernel version: 2.6.32.9
Build number: FRG83G
Software Version: LG-P999-AWC-V11h
Click to expand...
Click to collapse
Are you just looking to install Gingerbread or do you also want to update the baseband? If you don't understand the second part of the question don't worry about it. In that case you just need to install clockwork mod recovery using NVflash and then install pretty much any ROM you want.
If you want to update the baseband you need to use the offline method. Search for it.
Sent from my LG-P999 using xda app-developers app
When I got my P999 from wind with stock Froyo, I rooted and CWM'd it within 5 minutes of getting it. Use the Nvflash guides to install CWM.. All should be fine.
Yuvin said:
When I got my P999 from wind with stock Froyo, I rooted and CWM'd it within 5 minutes of getting it. Use the Nvflash guides to install CWM.. All should be fine.
Click to expand...
Click to collapse
yea just need install CWM and the rest is easy. Find a rom, download and then flash.
mansa_noob said:
Are you just looking to install Gingerbread or do you also want to update the baseband? If you don't understand the second part of the question don't worry about it. In that case you just need to install clockwork mod recovery using NVflash and then install pretty much any ROM you want.
If you want to update the baseband you need to use the offline method. Search for it.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
I want to get FM radio on it, also can I get 3G on a FIDO network with this phone? How does the base band affect these two things?
Thanks!!
mald55 said:
I want to get FM radio on it, also can I get 3G on a FIDO network with this phone? How does the base band affect these two things?
Thanks!!
Click to expand...
Click to collapse
FM Radio is disabled Via Hardware on the P999. The P990 Has FM Radio but we don't. If you need FM, Use TuneIn radio, but you will need to have an internet connection. Since FIDO isn't Wind or Moblilicty etc, and our phone isn't a Pentaband phone, I don't think that you will be able to get 3G With the different radio that Rogers/Telus/Fido uses. Calls, Text, and 2G data will work fine, just not 3G.

Categories

Resources