Mytouch 3g rooting.... - myTouch 3G, Magic Android Development

I know this topic is ALL over this forum and about a thousand others. That is why it is so confusing.
I am having issues when trying to "root".
I have tried the flashrec 1 click method. I get an erro "main version is older" Updated failed.
So I am hoping someone can let me know WTF is going on and which is the best process for my handset.
Here is my handset specs:
T-Mobile mytouch 3G
Firmware Version: 1.6
Baseband Version: 62.50s.20.17u_2.2219.26i
Kernel Version: 2.6.29-00479-g3c7df37
android-buildapa26#19
Build Number: DRC92
Board Version: 32B
I know this process is not too difficult, but I just seem to be getting lost in all of the different ways of doing this....
Im also seeing blog posts about not being able to root a 1.6 yet, and that you have to downgrade to 1.5???
TIA

You cannot one click root if you are on 1.6. That is the issue that you are running into. You need to downgrade to 1.5, then you can one click root. It says it on all of the one click tutorials...

Related

[Q] Rooting My evo

Hello guys. I have a question and i couldnt find a solution anywhere and in the past 3 days i have been to hundreds of websites.
My question is. I have a brand new evo and i want to root it but unrevoked doesnt work with my version of software. Is there an updated rooting procedure yet for my evo ( specs listed below)
Android Version - 2.2
Baseline Version - 2.15.00.09.01
Kernal Version - 2.6.32.15-g59b9e50
Build Number - 3.30.651.3
Software Version - 3.30.651.3
PRI Version - 1.77_003
PRL Version - 60672
now all the posts i have seen so far only use software 3.29 and lower has unrevoked come out with a release for version 3.30.651.3 and if so could you point me in the right direction cause im confused with some posts saying yes you can and othrs saying no you cant
Thanks guys i appreciate it

[Q] Could I flash 1.35.401.1 to 1.35.401.1 Euro ?

I don't know what my brother did with the rooting and technical stuff but I want to go back to stock rom/firmware something to make something that I could return it to the store for a fix. Screen crack.
I'm don't know much about android process because I came from IOS.
Should I install the radio to get back to full stock and unroot it in hboot: RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed
Anyone have anyway to do it? Like a tutorial on how to do it so I could understand it a lot better.
My info:
Phone: HTC Sensation 4g running on coredroid 2.3.3
Network: US Tmobile
build number 1.35.401.1
Baseband version: 10.42.9007.00P_10.11.9007.15_M.
S-off.
Thanks.

Nexus S: 3G issues and Updating Issues

Hi guys I'm new to forums so bear with me. I have had the gsm nexus s that I use on t mobile for quite a long time. Ever since I bought it won't connect to 3G and is also stuck on 2.3.4 and wont update, and now that I hear it's getting Jellybean im starting to get a bit annoyed. I've tried all kinds of stuff I have seen in forums but nothing ever works so I'll get down to specifics. Here's the "About phone"
model: nexus s
android version: 2.3.4
Baseband version: I9020AUCKE1
Kernel Version: 2.6.35.7-ge382d80 [email protected] #1
build number: GTJ61
Anyone have any ideas? Thank you

RUU help - Am i doing this right??? EVO 4G

Trying to get back to out of the box stock software. Tried a RUU and still hasn't gone completely stock. I still have antenna signal (roaming issues)...basically can't get signal when I used to get full. It seems to be roaming on Verizon towers. Also, can't type certain areas of the screen or the letter I press does not input.
I researched and on stock Froyo 2.2 and running 3.70 I think I am suppose to be on 1.90 PRI instead of what I currently have downloaded PRI 2.15. Could that be the issue? If so, how do I downgrade properly to 1.90? I heard 1.77 has better battery life would that be a better alternative? Thanks for any help u guys give....I have been on this mystery for almost two weeks
EVO 4G S-OFF
ANDROID VERSION: 2.2
BASEBAND VERSION: 2.15.00.12.19
KERNEL VERSION: [email protected] #15
PRI VERSION: 2.33_003
PRL VERSION: 60690
RADIO-2.15.00.11.19
HBOOT-6.16.1002
SOFTWARE NUMBER: 3.70.651.1
What Device? OG EVO 4G ?
old skool EVO 4G.
I was given advice to do these two methods: I Did the link for the current radios and experiencing same problems. I guess I'll do the Mikg3.11 full swipe next. If that does't work I do not know what to do next.
here is the link for the current radios:
CM-EVO_Radio-2.15.00.12.19_PRI-2.33_WiMax_NV.zip
and here is the link to mikg3.11 which is waaaaaay better then stock:
MikG v3.11 [3/9/2012] FULL SWIPE
prboy1969 said:
What Device? OG EVO 4G ?
Click to expand...
Click to collapse
Where the last EVO 4G ended up having antenna probs and dead pixels. Luckily, I got myself a used EVO 4G but it has the Cyanogenmod 7 rom on it and I cannot activate it to my pre-existing Sprint line.
Talked to Sprint customer service and they said that it needs to go back to stock program so that the command prompts to activate the phone will work.
I used flashed these files: CM-EVO_Radio-2.15.00.12.19_PRI-2.33_WiMax_NV.zip and PC36IMG and it did not get it back to the stock rom.
What am I doing wrong?
Android version: 2.3.7
Baseband Version: 2.15.00.12.19
Kernel Version: [email protected]#1
CPU: ARMv7 Processor rev 2 (v71)
Build: GWK74
PRL: 60681
HBOOT: 0.97.000
SHIP S-OFF
RADIO: 2.15.00.12.19
See my reply to your other post you made in this forum. Also, you might get a better response next time by posting in the EVO 4G section
Sent using my HTC EVO 4G and a magic wand

[Q] question for htc evo 4g lte (pc36100)

okay some of you people are probably gonna smirk or laugh at this hehe but i need some advice/help.
question:
my question is my volume button does not work at all on the phone specified in the title of this new thread here are the detailed specs for it below:
firmware version:
2.1-update1
baseband version
2.05.00.06.10
kernel version
2.6.29-789bf291
[email protected] #1
build number 1.47.651.1 cl195459 release-keys
software number
1.47.651.1
browser version
webkit
pri version
1.90_003
prl version
35513
i'm trying to install a custom rom i don't think this is possible with out the volume button needed to get into fast boot mode etc. how ever if anyone on here that has more experience and knows other possible ways of getting this done please let me know asap i would appreciate it. been searching on the google but no avail as of yet. thanks in advance for any help.

Categories

Resources