This thread is dedicated only for device OPPO FIND MUSE (R821), this device was discontinued from the manufacturer but our community keep growing to support it's user
I ported this ROM from from the official firmware of OPPO JOY (R1001), which have almost very identical specs. Mediatek MT6572 with 512MB of RAM and 4inch screen, so the bug was at it's minimum. There also some Color OS ported from various OPPO devices, OPPO R831 and R831K, but those devices are have some differences in specs. I attached some screenshots in this post.
What you need:
1. Working Root access. I recommend using Framaroot, you can download it here... http://www.mediafire.com/?rrutz7czckbcc4u
2. Working Custom Recovery. I recommend using Carliv Touch Recovery (based on CWM), you can download it here... http://www.mediafire.com/view/?jwduwi3cqv1y1dx
3. A fresh downloaded ColorOS ROM ported by me. It should be in zip format and located on your SDCARD, don't extract it. You can download the COlorOS ROM from link i provide on the end of this post.
4. For newbie, i made a youtube video about how to get all those requirement works on R821. Make sure you watch it and don't make mistake, or else you will brick your device (check this video http://youtu.be/xspIXoGMcz0)
5. A good knowledge of the risk doing this. Remember always Do With Your Own Risk (DWYOR)
Whats not Working (read this before you complaint)
1. Screen of gesture (i believe it's due to diferrence in kernel/hardware)
2. Wi-Fi Direct (i believe it's due to diferrence in kernel/hardware)
3. Hot-Knot (i believe it's due to diferrence in kernel/hardware)
4. Compass (OPPO R821 didn't have any compass sensor)
What's need to know about this ColorOS version
- No App removed (to make sure it's update-able in future)
- No Root (to prevent a newbie from messing with the system files)
- No Tweak (i hate tweak, sometimes it's make device unstable/overworking)
- No Mod (to make sure it's update-able in future)
- Pure ColorOS (i didn't add any other apps, so it's just like clean ColorOS from OPPO)
- I will add an patched OTA update if available (depending on OPPO R1001) in format CWM flashable zip. And please don't update via OTA by using ColorOS System Update, it will be aborted in the process.
- After update OTA 140725, ColorOS version updated from V1.0.0i to V1.0.2i
#################################################################
ColorOS ROM Download link (520MB+)
http://www.mediafire.com/download/d3iw8mecms08jj0/R1001_11.A.02_OTA_INT_002_all_140401_wipe.zip :good::good::good:
(an OTA update must be flashed sequentially)
1. OTA update ColorOS Joy R1001 --> 140507 (29MB+) ....... http://www.mediafire.com/?fk0rb9ret5khdog
2. OTA update ColorOS Joy R1001 --> 140522 (2MB+) ....... http://www.mediafire.com/?2ui1dwcybsftx86
3. OTA update ColorOS Joy R1001 --> 140620 (115MB+) ....... http://www.mediafire.com/?baxdz52ucui7d2o
4. OTA update ColorOS Joy R1001 --> 140624 (70MB+) ....... http://www.mediafire.com/?9ctqc72fvu915ak
5. OTA update ColorOS Joy R1001 --> 140725 (80MB+) ....... http://www.mediafire.com/?93rfq4p8euhbk9e
6. OTA update ColorOS Joy R1001 --> 140812 (4MB+) ....... http://www.mediafire.com/?lgsvx9p9iy268f7
#################################################################
Credits
- Mastah Dilov for the porting guide
- Komunitas OPPO Find Muse Indonesia (https://www.facebook.com/groups/oppofindmuse)
- All OPPO Find Muse user around the world
- Me (WJW) for porting the ROM and make a post in XDA
Will it work for Xolo q700 or Gionee m2?
hey
it's you here Wol ???
http://www.oppoclub.in.th/threads/coloros-for-oppo-find-muse-r821-port-joy.5/
I using this ROM and it very OK
BUT..
i cannot flash Update from 20140828 to later.... why ?? Can you fix it plz ??
Thanks !!!
Will this work for oppo r 1001?
Hi all my dear Miui users,
Finally the wait is over and you can download all new Flyme os for mi4i not just flyme can be called Fly me. As i see most of them waiting for an eye-striking Rom without any bugs I Present you the Flyme. This is the UI for Meizu phones, and also an customizable rom with hidden features leaving us in a mystery.
What is flyme OS ?
Flyme OS is a stock and after market firmware developed by Meizu for smartphones based on the Android operating system. Some its key features are completely redesigned apps, one-handed usability and performance optimizations. The initial version, Flyme OS 1.0 based on Android 4.0.3 was released on Juny 12, 2012. It was praised by critics for its simple yet beautiful interface design. Flyme OS 2.0 was released later in 2012 . It brought improved cloud services and build-in root support, among other improvements. Flyme OS 3.0 was released together . It was one of the first Android firmwares to integrate a flat UI. Since Flyme OS 3.0, Dirac HD Sound is integrated, bringing an improved audio experience through a certain number of ear and headphones. The successor the Flyme OS 3.0, Flyme OS 4.0 was released in 2014.The current version of Flyme OS, Flyme OS 4.5, is based on Android Lollipop.
So to start enjoying Meizu in your phone [ I mean Flyme os in Mi4i ] .
Requirements for flashing Flyme:
A working Mi4i phone with enabled USB debugging
To enable USB Debugging Tap on MIUI Version 7 times and go to additional settings then to developer options - scroll down and look for it
Your Mi4i should have either 5.6.11 or 6.6.10 MIUI version so as not to have any bootloop
Rooted phone with a custom recovery like TWRP installed [ twrp is recommended]
Download Gapps and Flyme for Mi4i in root of your device storage with links at last
Phone Battery Charged Above 70% At Least.
Backup the original system data (contacts, SMS, application data, etc.)
INSTALL INSTRUCTIONS
Boot into recovery
Clear Data.
Clear Cache.
Clear Dalvik Cache.
Flash flyme_MI4I file from from internal SDCard.
Clear Cache and Clear Dalvik Cache.
Reboot.
Note in the initial boot it takes 5-10 minutes and phone gets hot like red hot iron. and after booting then retart and install Gapps
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
Download ROM
http://www.mediafire.com/download/38wdprwliedh21q/flyme_ferrari_moonlight_4.5.4.2R.zip
Gapps : http://opengapps.org/
credits:
original thread created by
faisal337
Trying this just for the gestures...
mmxandy said:
Hi all my dear Miui users,
Finally the wait is over and you can download all new Flyme os for mi4i not just flyme can be called Fly me. As i see most of them waiting for an eye-striking Rom without any bugs I Present you the
Note in the initial boot it takes 5-10 minutes and phone gets hot like red hot iron. and after booting then retart and install Gapps
Disclaimer : I didn't created this ROM, i am just sharing this ROM itself without making any modifications and source link is provided below. If anybody wants more info then he/she can visit the source link. Thank You !
credits:
original thread created by
faisal337
Click to expand...
Click to collapse
Hi, nice find.
Can you give us a link for the original site/forum, so we can see what the development is?
What bugs are fixed etc.?
etc.etc.etc.
Thanks.
Theres no development thread. Only a chinese blog saying the same things in both threads...
elot01 said:
Hi, nice find.
Can you give us a link for the original site/forum, so we can see what the development is?
What bugs are fixed etc.?
etc.etc.etc.
Thanks.
Click to expand...
Click to collapse
here you go
http://en.miui.com/thread-193633-1-1.html
mmxandy said:
here you go
http://en.miui.com/thread-193633-1-1.html
Click to expand...
Click to collapse
Thanks.
does everything work?
camera? does its better than other cusrom?
I flash this rom today, but mobile network can not activated. I set an APN, turn on the setting and others which necessary, but still not active.
Sent from my MI 4i using Tapatalk
I could not switch to 4G. Could not change theme.
Sent from my MI 4LTE using Tapatalk
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- Latest Official: http://www.doogee.cc/bbs/viewtopic.php?f=10&t=25
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" instead.
Previous Releases:
- 20161028: http://www.needrom.com/wp-content/uploads/2016/12/Doogee-Y6-30.rar
- Here: http://www.needrom.com/download/doogee-y6/
Stock (Android 7.0 - Beta)
Official Nougat (04/25/2017): https://www.needrom.com/download/doogee-y6-7-0-2/
Don't flash the preloader and lk & lk2 from this rom! It will lock your bootloader (that's a new and pointless thing).
Instead, use the fix from this post.
Previous release (01/21/2017): https://www.needrom.com/download/doogee-y6-7-0/
Flash with "Firmware upgrade" option. Make NVRAM backup first!
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.0.2: https://forum.xda-developers.com/showpost.php?p=69800037&postcount=3- TWRP 3.1.1: https://www.needrom.com/download/twrp-3-1-1-for-y6/
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Custom ROMs
Disclaimer (custom roms' specific)
This section is intended for advanced users. You have to know how to flash a custom rom and how to go back to stock rom whenever you feel the need to do so.
ROMs in this section are not 100% bugless. Expect things not to work properly as they would on stock.
Nobody is responsible for anything that happens to your phone if you use any of the custom roms below!
Android 7.x ROMs:
1. AOSP 7.1: https://forum.xda-developers.com/android/development/rom-aos-7-1-doogee-y6-t3695534
Developer: Nonta72
Bugs:
Potential weak signal on 4G/LTE networks.
2. Nokia 3 ROM: https://forum.xda-developers.com/android/development/rom-nokia-rom-doogee-y6-t3691410
Developer: Nonta72
Bugs:
None.
3. Android One ROM: https://forum.xda-developers.com/android/development/rom-android-one-rom-doogee-y6-t3687182
Developer: Nonta72
Bugs:
None.
4. Xperia™ ROM: https://forum.xda-developers.com/android/development/rom-xperiarom-doogee-y6-t3698430
Developer: Nonta72
Bugs:
Front camera is dark at night in video recorder mode..
5. XOS V2.2 ROM: https://forum.xda-developers.com/android/development/rom-xos-v2-2-doogee-y6-t3700109
Developer: Nonta72
Bugs:
Flashlight toggle in status bar and heavy touch vibration..
6. LineageOS 14.1: http://www.nontastik.com/lineageos-14-1-doogee-y6-stable/
Developer: Nonta72
Bugs:
YouTube 720p and higher at 60 FPS lags.
Video Recorder in stock camera app doesn’t work (use Footej app from Play Store as a workaround)
Front camera is dark in stock Camera app. Use Google Camera or another camera app to fix it
Wi-Fi doesn’t connect to known networks after a reboot.
7. Stock 7.0 modded: https://cloud.mail.ru/public/Ef1y/gFo9r1oWm
Developer: vladykodi
Bugs:
I haven't tested that ROM. You have to flash it find out!
Android 6.x ROMs:
1. MIUI 9 (7.8.28): http://www.nontastik.com/miui-9-doogee-y6-mt6750/
Developer: Nonta72
Bugs:
Youtube 60FPS videos aren't smooth
VPN
2. Resurrection Remix 5.7.3: http://www.nontastik.com/resurrection-remix-5-7-3-doogee-y6-beta/
Developer: Nonta72
Bugs:
FM Radio
Bluetooth Audio (A2DP)
3. XOS V2.0 (Infinix OS): http://www.nontastik.com/xos-v2-0-rom-doogee-y6/
Developer: Nonta72
Bugs:
Haven't spotted one during my tests
4. Pixel: https://cloud.mail.ru/public/2G5d/uwoycgLym
Developer: vladykodi
Bugs:
Flash it and find out! I haven't tested it.
7. FlymeOS 5: http://www.nontastik.com/flymeos-5-doogee-y6-android-6-0/
Developer: Nonta72
Bugs:
I didn't find a major bug during my tests
8. Aerom V5 (best rom for gaming!): http://www.nontastik.com/aerom-v5-aosp-doogee-y6/
Developer: Nonta72
Note: This ROM has great performance! Antutu score goes up to 40,000 compared to stock (about 36,000).
Bugs:
I found none during my tests.
9. Huawei EMUI 4.1 (beautiful ROM): http://www.nontastik.com/emui-4-1-marshmallow-doogee-y6-mt6750/
Developer: Nonta72
Bugs:
Serious battery drain issue!
10. CyanogenMod 13: https://mega.nz/#!kR9yWJaD!No3c86ZHN9QZdr8L9ga5UPjWN6ZmUn_r1AiGqtz6hT4
Developer: Nonta72
Bugs:
Camera HDR
Bluetooth Audio (A2DP)
XDA:DevDB Information
DOOGEE Y6 - Development & Support, ROM for the Android General
Contributors
Alberto96, Nonta72
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2017-09-27
Last Updated 2018-01-09
Here is Stock Rom Bro, 6.0 MT6750-Stock Rom Doogee y6
TWRP 3.0.3 for Doogee Y6
TWRP 3.0.3 for Doogee Y6
Based on Android 6.0 firmware ver. DOOGEE-Y6-Android6.0-20161028
WARNING!! Strictly follow these installation instruction!
Install:
1. Flash the recovery.img using SP FlashTool
2. Enter into TWRP and Install the patch "SuperSU 2.79"
3. Reboot to the system
I have bought this phone and the look is great. but I feel the tough not super responsive and fingerprint just does a decent job. I wanted to know whether it supports Volte? and if yes how do I turn it on. bcoz if I open the phone information it has the option - " turn off Volte provisioned flag". or do i have to install a new rom ?
ravikiran1252 said:
I have bought this phone and the look is great. but I feel the tough not super responsive and fingerprint just does a decent job. I wanted to know whether it supports Volte? and if yes how do I turn it on. bcoz if I open the phone information it has the option - " turn off Volte provisioned flag". or do i have to install a new rom ?
Click to expand...
Click to collapse
Do you still have the phone?
I have few roms (cm13, Resurrection Remix, EMUI, Nubia, Aerom etc.)
Mine is busted for the time being.
CynogenMod 13 (yup, still CM, we can't get Leanage OS yet)
I have ported CyanogenMod 13.0 from P9000.
It's usable but two major bugs probably need to be fixed:
Camera HDR mode
Bluetooth (it can't seem to connect to some BT devices like BT Headsets)
Download link: cm13_Y6.zip (MEGA)
I was not able to fix these bugs as my doogee y6 touchscreen is no longer working after I have wrongly flashed a kernel to it. I am trying to revive it but I'm not sure it will ever be recovered, so maybe someone else can try to fix the remaining bugs.
I also would like to ask Y6 owners to share a file called gt1x_debug which I believe can help me recover my touchscreen. You can get it using cat proc/gt1x_debug from either adb or Terminal Emulator app.
Credits to @Deepflex and @Jonny for their work on the P9000.
Nonta72 said:
I have ported CyanogenMod 13.0 from P9000.
It's usable but two major bugs probably need to be fixed:
Camera HDR mode
Bluetooth (it can't seem to connect to some BT devices like BT Headsets)
Download link: cm13_Y6.zip (MEGA)
I was not able to fix these bugs as my doogee y6 touchscreen is no longer working after I have wrongly flashed a kernel to it. I am trying to revive it but I'm not sure it will ever be recovered, so maybe someone else can try to fix the remaining bugs.
I also would like to ask Y6 owners to share a file called gt1x_debug which I believe can help me recover my touchscreen. You can get it using cat proc/gt1x_debug from either adb or Terminal Emulator app.
Credits to @Deepflex and @Jonny for their work on the P9000.
Click to expand...
Click to collapse
Nice job on the port!
As for gt1x_debug, here's a direct copy-paste from my terminal to Pastebin.
Just in case there's any form of binary data that's needed, here's the file itself (created by # cp /proc/gt1x_debug /sdcard/gt1x_debug).
DepressedHedgehog said:
Nice job on the port!
As for gt1x_debug, here's a direct copy-paste from my terminal to Pastebin.
Just in case there's any form of binary data that's needed, here's the file itself (created by # cp /proc/gt1x_debug /sdcard/gt1x_debug).
Click to expand...
Click to collapse
Thank you for the file!
I hope I can recover it.
Problem
Nonta72 said:
I have ported CyanogenMod 13.0 from P9000.
It's usable but two major bugs probably need to be fixed:
Camera HDR mode
Bluetooth (it can't seem to connect to some BT devices like BT Headsets)
Download link: cm13_Y6.zip (MEGA)
I was not able to fix these bugs as my doogee y6 touchscreen is no longer working after I have wrongly flashed a kernel to it. I am trying to revive it but I'm not sure it will ever be recovered, so maybe someone else can try to fix the remaining bugs.
I also would like to ask Y6 owners to share a file called gt1x_debug which I believe can help me recover my touchscreen. You can get it using cat proc/gt1x_debug from either adb or Terminal Emulator app.
Credits to @Deepflex and @Jonny for their work on the P9000.
Click to expand...
Click to collapse
I tested the rom, Lags & battery drain.
EMUI 4.1 Marshmallow
A new rom!
Try it yourself and see how it goes.
More info on needrom here http://www.needrom.com/download/emui-4-1-marshmallow/
Note: It should work on Y6 Black Piano version aswell. :good:
Nonta72 said:
A new rom!
Try it yourself and see how it goes.
More info on needrom here http://www.needrom.com/download/emui-4-1-marshmallow/
Note: It should work on Y6 Black Piano version aswell. :good:
Click to expand...
Click to collapse
When you fix the battery drain?
ZNetDark said:
When you fix the battery drain?
Click to expand...
Click to collapse
Probably not gonna be fixed ...
Nonta72, your port of CM 13.0 works great for me, it only lags for a few seconds on boot-up (which is pretty much expected).
The only issues I seem to have noticed is the HDR functionality not working and the battery being recognized as 3,000 mAh instead of 3,200 mAh, which may be causing the battery drain issues other people seem to be experiencing. Other than those few problems though, the port works great!
@Nonta72 Here is the file from my phone as well: https://hastebin.com/raw/vapunecofa
DepressedHedgehog said:
Nonta72, your port of CM 13.0 works great for me, it only lags for a few seconds on boot-up (which is pretty much expected).
The only issues I seem to have noticed is the HDR functionality not working and the battery being recognized as 3,000 mAh instead of 3,200 mAh, which may be causing the battery drain issues other people seem to be experiencing. Other than those few problems though, the port works great!
Click to expand...
Click to collapse
I had succeeded to make an improved version before the phone got screwed.
I will upload it soon. And how did you know that the battery is recognized as 3200 mAh ?
My phone used to drain battery even in my stock rom. And the battery drivers are mostly inside the kernel I believe.
I hope Nougat update will fix the battery drain with a new kernel. I heard they will update the Piano Black version. So maybe the normal version too.
Zokoro said:
@Nonta72 Here is the file from my phone as well: https://hastebin.com/raw/vapunecofa
Click to expand...
Click to collapse
Hi,
You seemed to have pulled the configs while the screen was off. That's probably why the second raw of data are 0x00 (which means EMPTY). Try to pull it with screen turned on and phone unlocked. Thanks.
Ah, my bad. https://hastebin.com/fifuhisomu Here you go!
Aerom V5 for DOOGEE Y6
Hi,
This is Aerom V5 ported from Elephone P9000.
It is a pure AOSP ROM.
It is fast ! Up to 40,000 Antutu score!
No bloatwares
No bulsh!t
No virus
Just stock Android.
Bugs:
You tell me (I did not have the chance to test it deeply)
Downloads:
Aerom-V5_Y6.zip (Mega.nz - 834.4 MB)
Install with TWRP
Screenshots click here!
Credits:
Deeplex
Jonny
Nonta72 said:
Hi,
This is Aerom V5 ported from Elephone P9000.
It is a pure AOSP ROM.
It is fast ! Up to 40,000 Antutu score!
No bloatwares
No bulsh!t
No virus
Just stock Android.
Bugs:
You tell me (I did not have the chance to test it deeply)
Downloads:
Install with TWRP
Screenshots
Credits:
Deeplex
Jonny
Click to expand...
Click to collapse
Hi - would this work with the Y6 piano black (DOOGEE Y6 Piano Black 5.5 Inch Fingerprint 4GB RAM 64GB ROM MTK6750 Octa Core 4G Smartphone - from Banggood) ?
I bought it a couple of weeks ago and I need to restart it twice daily as the screen becomes unresponsive.
Should I flash the stock rom first? Does it come already with the stock rom from Banggood, or has it been bloated on the way from the factory?
Thanks for any help.
MR
mcr1974 said:
Hi - would this work with the Y6 piano black (DOOGEE Y6 Piano Black 5.5 Inch Fingerprint 4GB RAM 64GB ROM MTK6750 Octa Core 4G Smartphone - from Banggood) ?
I bought it a couple of weeks ago and I need to restart it twice daily as the screen becomes unresponsive.
Should I flash the stock rom first? Does it come already with the stock rom from Banggood, or has it been bloated on the way from the factory?
Thanks for any help.
MR
Click to expand...
Click to collapse
Yes, it should normally work on Y6 Piano Black because it has the same kernel as the Y6 normal version. But I suggest you port the kernel first. If you can't do that, upload the boot.img from your stock rom. I'll do it for you and you'll test.
Android 7.0 (apparently)
Hi,
While posting my last ROM (FlymeOS 5) for the Y6 on needrom, I stumbled upon this ROM.
Apparently it is Android 7.0 for the Y6.
I'm not sure whether it works or not. But I assume it works as it is Official.
I haven't tested it,
I don't have the Y6 anymore,
I don't know what works and what doesn't,
I don't know if it works on Y6 Piano Black too.
But I'm sure it doesn't work on Y6 Max/Max 3D.
Link: Android 7.0 for Y6
Thanks to [email protected] at needrom.
@Alberto96 Can you please update the INDEX with the recent roms? Thanks!
Hey! My Huawei Y5 II is operating using Android 5.1. Is it possible to install, say, LineageOS or one of the newest Cyanogen mods on it (based off 6-7 version android)?
Too10 said:
Hey! My Huawei Y5 II is operating using Android 5.1. Is it possible to install, say, LineageOS or one of the newest Cyanogen mods on it (based off 6-7 version android)?
Click to expand...
Click to collapse
Yes. If it made for your android then you can update.
Ashwinrg said:
Yes. If it made for your android then you can update.
Click to expand...
Click to collapse
What do you exactly mean? Both LineageOS and Cyanogen 13&14 are made basing on higher android versions than 5.1. My device isn't officialy in the supported devices lists either.
I have the Huawei Mediapad 10 FHD S10-101L (4G Edition) for some time now and still in good shape
Unfortunately I'm stuck with Android 4.0.4 and no more official updates available, and only Gmail is working now.
If anyone could help with upgrading the OS to the latest possible I would be thankful.
Regard
Abdul Bwzz
Huawei officially has released in June, 2013 an update to Android 4.1.
jwoegerbauer said:
Huawei officially has released in June, 2013 an update to Android 4.1.
Click to expand...
Click to collapse
Thanks for the reply, however, I need to install a newer version, the device is almost unusable as all apps are not supported now.
All you have to do is to find both a Custom Recovery and a Custom ROM suitable to the device.
If you found a matching Custom Recovery then after having flashed this you can flash the found Custom ROM via the Custom Recovery.
Deleted member 1890170 said:
All you have to do is to find both a Custom Recovery and a Custom ROM suitable to the device.
If you found a matching Custom Recovery then after having flashed this you can flash the found Custom ROM via the Custom Recovery.
Click to expand...
Click to collapse
I would appreciate it if you could assist with this.