Need Help Please - HTC Sensation

my phone is rooted running cyanogenmod 9 and whenever i want to install a sense rom it stays at the boot animation ive tried everything i even used the latest t mobile ruu to restore back to stock and it will not boot with the stock rom what can i do to fix this problem??

adame09 said:
my phone is rooted running cyanogenmod 9 and whenever i want to install a sense rom it stays at the boot animation ive tried everything i even used the latest t mobile ruu to restore back to stock and it will not boot with the stock rom what can i do to fix this problem??
Click to expand...
Click to collapse
I have experienced the same problem. Running CMX is fine but phone wont boot if flash sense based rom. Also, I am not able to flash firmware, phone either skip to update or says parsing package then skip. I am only htcdev unlocked and s-on. Really need help please.

adame09 said:
my phone is rooted running cyanogenmod 9 and whenever i want to install a sense rom it stays at the boot animation ive tried everything i even used the latest t mobile ruu to restore back to stock and it will not boot with the stock rom what can i do to fix this problem??
Click to expand...
Click to collapse
I know it sounds silly but I've had a similar problem in the past but it was all because I forgot to format the Partitions, dalvik cache from the recovery menu etc. Maybe try that if you haven't already. Hope it helps

Related

Help! Boot time very long when flashing kernel

Iv'e flashed every kernel i could find and used all different settings when installing but my phone stays on the HTC logo for about 3-4 minutes before starting up, even when rebooted 2-3 times its still the same iv'e tried wiping and installing rom again without flashing kernel an boot time is about 60 seconds so it must be the kernel messing up my device.anyone else have this problem?
ryanraven said:
Iv'e flashed every kernel i could find and used all different settings when installing but my phone stays on the HTC logo for about 3-4 minutes before starting up, even when rebooted 2-3 times its still the same iv'e tried wiping and installing rom again without flashing kernel an boot time is about 60 seconds so it must be the kernel messing up my device.anyone else have this problem?
Click to expand...
Click to collapse
if i was you i would try do a full wipe and then run an ruu, just to give yourself a fresh install. then place a custom recovery onto the phone again and install your rom of choice. if its still lagging then i dont know what it could be:/
heavy_metal_man said:
if i was you i would try do a full wipe and then run an ruu, just to give yourself a fresh install. then place a custom recovery onto the phone again and install your rom of choice. if its still lagging then i dont know what it could be:/
Click to expand...
Click to collapse
but doesn't RUU lock bootloader etc ?
ryanraven said:
but doesn't RUU lock bootloader etc ?
Click to expand...
Click to collapse
yea it does.as i see you are S-OFF so you do not need to flash the boot.img manually but give it a try to see if it works.if it is not then from recovery do format all partition(except sd card)and flash the rom again.best wishes
ryanraven said:
but doesn't RUU lock bootloader etc ?
Click to expand...
Click to collapse
it does, but since you are s-off you can just reflash the revolutionary/ jupuntobear hboots to have fastboot enabled ect
okay iv'e done all that installed RUU wiped everything etc install rom and installed kernel and still takes the same amount of time to start up so wiped again and left it with the kernel that came with the rom and it starts up much faster not sure why no kernel works properly with this rom. HyperSensation 3.1 CM
ryanraven said:
okay iv'e done all that installed RUU wiped everything etc install rom and installed kernel and still takes the same amount of time to start up so wiped again and left it with the kernel that came with the rom and it starts up much faster not sure why no kernel works properly with this rom. HyperSensation 3.1 CM
Click to expand...
Click to collapse
maybe its just the kernel your trying to flash doesnt like your phone ;P. which kernel is it?
heavy_metal_man said:
maybe its just the kernel your trying to flash doesnt like your phone ;P. which kernel is it?
Click to expand...
Click to collapse
ive tried a few and their all the same
XxXPachaXxX kernel aroma installer v2.53
Pyramid-ICS-XE-010b2-300-aroma
Bricked-3.0-v1.4-ics-maxkhz=1566000-minkhz=192000-maxscroff=486000 << Starts up the same time as ROM Kernel
3.0.40-TAMCORE-00689-gfe1a294
You do realize that different kernels are for either sense or aosp right?
Sent from my Sensation
blahbl4hblah said:
You do realize that different kernels are for either sense or aosp right?
Sent from my Sensation
Click to expand...
Click to collapse
yes but all of these kernels were recomended by other users to use with non sense roms

[Q] Boot loops after flashing ANY rom

I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Do you have the latest TWRP 2.4.1.0 ? (did you try reflashing your recovery?)
What android did you have before unlocking your bootloader? 4.0.3 or 4.0.4?
(and don`t panic If nothing works there is always a solution by relocking your phone and flash the ruu for your phone from here)
http://www.androidfiles.org/ruu/?dir=VilleC2
take a look here:
http://forum.xda-developers.com/showpost.php?p=37498221&postcount=309
impactor said:
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Click to expand...
Click to collapse
What's was you on before flashing a custom rom? because just a guess but I think it was 4.0.3 if that is so then try TrickDroid for S3 and get v3 which is 4.0.3 so should work.
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
impactor said:
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
Click to expand...
Click to collapse
No only v3 but if you can get an RUU thats more up to date then do that and the v4/5 should work.
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
KindleFireGuy said:
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Em what he said he did.
You cannot flash S4 roms with an S3 phone, have you made sure that the Roms you flash are specifically assigned for S3? Cuz most are S4
Thanks, guys. That was HBOOT problem. I flashed latest RUU and then I was able to use JB roms.
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
pcout64 said:
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
Click to expand...
Click to collapse
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
asdfasdfvful said:
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
Click to expand...
Click to collapse
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
pcout64 said:
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
Click to expand...
Click to collapse
Still new to xda, but check this out?
http://forum.xda-developers.com/wiki/HTC_Evo_3D/CDMA
(ctrl + f and find "ruu")
My mainver is not listed, I have already seen this page
The page was last edited in November of 2012, I think it's a bit out of date

[Q] Cant restore stock ICS TWRP backup from JB

My HOX was running stock rooted ICS and I did a TWRP backup and flashed [ROM ][22 MAR][UrDroid][HTC One X AT&T][Stock][JB][OTA][Odexed] EVITA 3.18.502.6 using the AROMA installer which had a kernel included. Now I am trying to restore the backup, while the process shows as successful, the phone does not pass the HTC screen, it goes black where the AT&T logo is supposed to come in.
I have to reflash the JB rom to get the phone working again. However, this rom is not stable, I keep getting random crashes or reboots, so I wish to revert to stock
Any idea why this is happening and how I can fix it?
Thanks in advance.
rohangiase said:
My HOX was running stock rooted ICS and I did a TWRP backup and flashed [ROM ][22 MAR][UrDroid][HTC One X AT&T][Stock][JB][OTA][Odexed] EVITA 3.18.502.6 using the AROMA installer which had a kernel included. Now I am trying to restore the backup, while the process shows as successful, the phone does not pass the HTC screen, it goes black where the AT&T logo is supposed to come in.
I have to reflash the JB rom to get the phone working again. However, this rom is not stable, I keep getting random crashes or reboots, so I wish to revert to stock
Any idea why this is happening and how I can fix it?
Thanks in advance.
Click to expand...
Click to collapse
What hboot do you have? If you have hboot 1.14 or newer and are not s-off, you'll need to pull the kernel from the ICS rom and flash it via fastboot.
Great! I just need to track down the stock ICS kernel because I think my phone came with version 2.20.
Any idea where I can locate it?
Thanks.
rohangiase said:
Great! I just need to track down the stock ICS kernel because I think my phone came with version 2.20.
Any idea where I can locate it?
Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1671237
Custom ROMs -> Stock Rooted (Odexed/De-Odexed)
Grab any of the ICS ones and it should do the trick. If your TWRP backup backed up boot, you should also be able to pull it from the backup (\sdcard\TWRP\backups\etc.), but I've never done this before and don't have a backup handy on my phone, so I wouldn't be able to tell you exactly where you'd need to look to find it. Shouldn't be too complicated though if you poke around?

problem flashing roms on moto g xt1032

Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now
Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great
hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?
will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.

[Q] problem installing rom.

Hello guys,
I installed CM11 a while ago on my Nexus 5. I had no trouble installing it through Cyanogenmods own installer, but now i want to install
the official rom again, so android 4.4.4 Kitkat. But when I want to flash it through TWRP i get the error that there is no MD5 file found.
I got the rom from the official site from Google.
I want to install the clean version of android again because i have some trouble with my battery and want to try if its still a problem with original software
installed.
So can you help me with this?
Thanks in advance.
Eelke91
When you after trouble shooting a battery issue you should wipe your phone and flash the stock image. Do not trouble shoot a battery issue with a custom ROM. Period. There are too many factors involved. And bugs can arise that won't be in a stock image.
I do want to flash to my stock image, but sadly i didnt backup so i want to manually install stock android kitkat.
Eelke91 said:
I do want to flash to my stock image, but sadly i didnt backup so i want to manually install stock android kitkat.
Click to expand...
Click to collapse
You don't have to wipe internal. Just Data and Cache. Go fastboot a stock image. If you aren't backing up Your Apps and you aren't clean flashing ROMs, that's why you are having so many issues. Never dirty flash a ROM unless your ROM Dev says otherwise.
Okay, but im pretty sure I wiped everything trying to install stock android. Atleast i got the message when i wanted to reboot that there was no OS installed..
So if its still possible to fastboot to my stock image can you tell me how to? I've now restored my phone to CM11, which was the last ROM i had installed, so i still can use my phone but its not the stock
image.
Eelke91 said:
Okay, but im pretty sure I wiped everything trying to install stock android. Atleast i got the message when i wanted to reboot that there was no OS installed..
So if its still possible to fastboot to my stock image can you tell me how to? I've now restored my phone to CM11, which was the last ROM i had installed, so i still can use my phone but its not the stock
image.
Click to expand...
Click to collapse
Google nexus factory image. Use that with fastboot.
Sent from my Nexus 5 using XDA Free mobile app
Eelke91 said:
Okay, but im pretty sure I wiped everything trying to install stock android. Atleast i got the message when i wanted to reboot that there was no OS installed..
So if its still possible to fastboot to my stock image can you tell me how to? I've now restored my phone to CM11, which was the last ROM i had installed, so i still can use my phone but its not the stock
image.
Click to expand...
Click to collapse
The instructions to flash a factory image are on the same page you download the image from. You need to flash it with fastboot, not recovery.
Okay i flashed it back to the stock os but still problems with my battery so i think its broken..
Eelke91 said:
Okay i flashed it back to the stock os but still problems with my battery so i think its broken..
Click to expand...
Click to collapse
Not likely. Probably just wakelocks. Go visit the battery help thread in my signature

Categories

Resources