Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
academic said:
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
Click to expand...
Click to collapse
Thanks for your answer!
I try with another headset...
Sirius75it said:
Thanks for your answer!
I try with another headset...
Click to expand...
Click to collapse
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Sony Ericsson bluetooth headsets work also just fine.
butzchan said:
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Click to expand...
Click to collapse
I have the same problem with my Motorola H700!
Going to try an old Jabra headset this evening.
Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
I have the same problem and sometimes I re-apply pairing between the headset and my polaris
same problem with Motorola H700. and olso motorola HS 810
They seem not to be compatible
I have reconnect my old carkit bluetooth Parrot CK3000 Evolution and with my HTC Touch Cruise work very fine!
With my old P3600, the parrot ck3000 evolution don't work fine but have problem with audio and connection, therefore i had unplugged and i had buy the headset Motorlola H700 thed worked well with P3600...
Same problem with Jabra headset
I have also exactly the same problem with a Jabra headset.
I found that the problem only occur when bluetooth is first activated on HTC and then activated on the headset. if I do it in the other way it works fine.
that's also the reason why it works after a soft rest of the HCT or disconnection reconnection of bluetooth on HTC.
Does it only mean that the headset is not compatible or is this a problem on the HTC.
Vincent
I don't know the bluetooth 2.0 + edr is compatible with motorola headset
perhaps a bluetooth incompatibility
i read on it http://direct.motorola.com/ENS/HKernel/H700_Headset_detail.asp
this : # Bluetooth Class 2 for wireless connection of to 10 meters
(30 feet)
# Compatible with Bluetooth 1.2- or 1.1-enabled mobile
phones, PDAs, PCs, and more that support headset and
hands-free profiles
I had the same problem with the H700. It connected fine the first day, and I used it for about 15 minutes. The next day, it wouldn't stay connected at all. Tried to re-pair, etc..no luck. My Jabra BT-125 works great, as does my LG HBM-730.
HTC patch for bluetooth
I saw on HTC (in the e-club section) that there is a patch for Touch (is it touch only or touch cruis also? I don't know) regarding "bluetooth connection problem".
Unfortunately I cannot download it.
If someone can do it, I'm interested.
Vincent
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Where I can found the patch ?? I want to try it on my cruise. If don't work I will restore all with a backup file...
you can found it on HTC web in the e-club section. If the patch works properly write it in the forum please!
mesmo said:
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Click to expand...
Click to collapse
Same specifications but different motherboard. Don't try it.
Ok......... thank you, I'll wait for another solution
After more and more test, I have found that the problem of the motorola Headset HS850 (and I think H700 etc. etc.) is the boom switch.
If you pair the headset to the Cruise and use it, it works fine (not stop after 3-4 seconds). Works great also bluetooth audio program:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
for redirect all audio to the headset.
But... if you switch off the headset with boom close, next time it will not work more than 3 seconds
So, the problem on this motorola is the automatic connection when open the boom.
Sony Ericsson HCB-700
Hi. I seem to be having similar problems. I had 3 phones linked to my HCB 700, and all worked fine. Very occasionally, I would have found that one wouldn't pair up when the ignition was switched on, but with my old Orbit 1, that may have happened once a week. I got a new Orbit 2, and was able to pair it easily. Now, it never fails to start paired, but frequently drops the BT connection. Usually a simple button press links it again, but it will rarely stay linked for more than 30 minutes, and could drop the connection 3 or 4 times in 10minutes. Then it may work for 30 minutes. I tried a reset to default settings, and re -paired the two again, but it doesn't seem to have made any difference. This can happen whether I have used the phone or the handsfree or not.. I'm thinking of getting a Parrot kit now instead - any ideas? Thanks in advance..
Hi all,
I am currently using a HTC Diamond 2, and just bought a Blackberry HS-655+ Bluetooth adapter. I am having some issues, and wondering if anyone knows the answer.
I have no problem pairing the adapter to the device the first time, but after I turn off and on the adapter, the phone can no longer pair with the headset. I have to manually delete the profile in the phone and search for the new device to connect it again.
Anyone has any thoughts?
Thanks a lot!
UPDATED: Problem Solved.
I am using Prime 1.8.4. My tablet is posited with my Jawbone but will not connecT. Every time I try to connect them, I get a force close popup. Can anyone help?
+1 Bump, I've got the same problem
My problem ended up being only related to the specific headphones that I have. When I paired my phone with my TF, it worked fine. Check to see if other devices work and we'll try to diagnose the problem.
Totally forgot to check this thread! I just tried pairing both a Jawbone Jambox and Motorola S9-HD. Both device show "paired but not connected." When I click on the "wrench" icon under the Bluetooth menu it will force close. Please help. I'm on Prime 2.0.2.
Running Prime 2.0.4. Tried pairing Jawbone Icon and got the same result. Any help would be appreciated.
bump
am getting this on Krakd. Anyone able to clear it out?
EDIT: remove everything under /data/misc/bluetoothd. That will clear all paired devices.
That still doesn't solve the issue. Please, somebody take the time to investigate this. I would if I could, but am too swamped with other stuff to try.
Prime 2.1.1, standard kernel. Southwing SA505 Stereo Bluetooth Headphones.
I have a Samsung tab 2 P3100, this is my first android device! i bought it for the sole reason to connect to my car's OBD.(On-Board Diagnostics) via a Bluetooth obd adapter
[ELM327 E-327 v1.5 Interface Bluetooth OBD2] using Torque app pro on Google play.
The problem is , it connect and pairs with the tablet the adapter is displayed as paired in Bluetooth settings!
but when torque pro is opened I choose connect via Bluetooth , a screen keeps appearing every 5 seconds please enter Bluetooth pin. the same happens if i use another application like palmers dashcommand to connect to the Bluetooth OBD.
i was told this is a Bluetooth driver issue with Samsung, i am on ICS. what can i do to fix the issue. PLEASE HELP!
Some experiments
1- if you are in ics 4.0.3 try to upgrade to 4.0.4
2-use stock only no cyanogenmode or so
3-send email to developers of the app containing system info and bug report and request solution
4- try remove pairing and reboot tablet and pair again
Sent from my GT-I9100 using xda app-developers app
thegod22222 said:
I have a Samsung tab 2 P3100, this is my first android device! i bought it for the sole reason to connect to my car's OBD.(On-Board Diagnostics) via a Bluetooth obd adapter
[ELM327 E-327 v1.5 Interface Bluetooth OBD2] using Torque app pro on Google play.
The problem is , it connect and pairs with the tablet the adapter is displayed as paired in Bluetooth settings!
but when torque pro is opened I choose connect via Bluetooth , a screen keeps appearing every 5 seconds please enter Bluetooth pin. the same happens if i use another application like palmers dashcommand to connect to the Bluetooth OBD.
i was told this is a Bluetooth driver issue with Samsung, i am on ICS. what can i do to fix the issue. PLEASE HELP!
Click to expand...
Click to collapse
Got the same problem, don't have any idea, i tried on G-note, 7+, S3 it works properly....Need help
Same problem, it all works but the pairing requests every 5 secons are plain annoying
I am using MildWild 5.x for HTC desire
works fine on my old D2
same problem
Hi everyone,
has anyone experienced problem with blue-tooth pairing on the Nexus 5. My problem basically is that every time i jump in the car i receive a BT pairing request. EVERY TIME! it sound like it is not saving the pairings... Didn't have that problem with my Galaxy S2. Im this close on returning the phone... problem after problem... Blue-tooth, Camera, crappy Speaker, Low Volume, screen colors. phone reboots, software crashes... geezz! sorry that was me venting...!!
im running completely stock firmware other than root...
I've paired my phone with two cars. On the first, the car requested contacts and history and I said no. This was asked about 3 or 4 times. Hasn't asked since.
When I paired with the second car, I continued to get the request for history/contacts...but from the first car's bluetooth ID. Over and over and over. Haven't gone back to see if it still happens though.
EDIT for UPDATE:
Just tried second car again and problem solved. As for your problem, have you looked at the car bluetooth settings?