(2012-08-26) Leomap_GarTotMod-China22-CrossOverX (2.2 for Milestone) - Motorola Milestone Android Development

Hi, all:
This is a Chinese 2.2 ROM (but can switch to English).
I did it on the 1st Oct., 2011 , it's based on China Official 2.2 and Gartot's work(A rommer in China).
(original thread with screen shots: http://bbs.angeeks.com/forum.php?mod=viewthread&tid=1250925&extra=page%3D1&page=1)
As you know, Chinese Android System is one of the world's largest number of users of language, so I think somebody might interest in it.
Part of the contents may not be suitable for everyone, such as China area coding, please note this.
-----------------------------------------------------------------------------------------------
Leomap_GarTotMod-China22-CrossOverX :
1) no google service, only contacts and calendar sync from google account.
2) incoming/ outgoing call CHINA AREA CODE, recording while on phone , Smart Dial Keypad/Normal Dial Keypad,
ADW Launcher/original Launcher, MIUI Music/transparent music , easily switch at any time
3) Crystal Talk
4) Contacts recoverable / backup,
5) SMS recoverable / backup / Bulk send / China area code
6) 2D/3D Gallery
7) SPAREPART settings ,
8) R.E. file manager
9) Plus Toolbox 2.17(can change the overclock and easily switch apks at any time, by fancies-(Another rommer in China )
10) FroyoPlus Settings (can always keep 2 custom apps in mem, by fancies )
11) Rooted, default overclocking 800
12) no input method, you may install your own favoris
-----------------------------------------------------------------------------------------------
This is a nandroid backup:
Leomap_GarTotMod-China22-CrossOverX : http://www.mediafire.com/?w5ce6l0imq0qluh
1) Download and unpack the nandroid backup file above, put it in the SDcard/nandroid/openrecovery floder
2) Reboot into OR (openrecovery 1.46 or 3.3)
3) wipe Dalvik Cache
4) wipe data / factory reset
5) wipe cache partition
6) Enter nandroid> restore> restore all
7) wipe data / factory reset
8) wipe cache partition
9) reboot
P.S.:
if it is freezed on the robot screen when first time to entering the system,
please touch the screen once in this order: upper left, upper right, lower right, lower left
-----------------------------------------------------------------------------------------------
if necessary:
download MOTO INPUT METHOD from: http://www.mediafire.com/?f7hek32gkmjxs39
Google Services for 2.2 from: http://www.mediafire.com/?15cbcb72t8xd7uu
(some of the apks may be outdate, please update from googleplay after you flash it by OR>UPDATED , sorry.)
-----------------------------------------------------------------------------------------------
Plus Toolbox 2.17(by fancies ), so that you don't need flash patch, easily switch at any time :
incoming/ outgoing call CHINA AREA CODE, recording while on phone , smart Keypad/normal Keypad, ,
ADW Launcher/original Launcher, MIUI Music/transparent music , easily switch at any time
How to use:
1)download and extract the application folder on to the root directory of the SDcard>Plusfiles >Themes_CM under
(Above is the default path, in fact, this path can also customize by yourself);
2) go into the Plus Toolbox - display / control panel settings - replacement system theme,
select an application, you can preview or choose switch applications;
3) Wait for the phone to automatically restart
(the phone may be shown the system software FC prompt or restart twice, don't worry , just patience);
4) done.
CN221-Record-NoAreaCode.rar: http://www.mediafire.com/?633m3de78lswnuv
CN221-AreaCode-NoRecord.rar: http://www.mediafire.com/?89j5s8s6b0yt49r
CN221-SmartDial-Keypad.rar: http://www.mediafire.com/?b278t5h767ai78m
CN221-Normal-Keypad.rar: http://www.mediafire.com/?je8nbvh7d1ckh4q
CN221-ADWLauncher.rar: http://www.mediafire.com/?q1qap555bqrpqa8
CN221-OriginalLauncher.rar: http://www.mediafire.com/?aczady0hd3gyq7h
CN221-MiuiMusic.rar: http://www.mediafire.com/?l10147m4cv3y4f0
CN221-OriginalMusic.rar: http://www.mediafire.com/?ea475yq2e6owp8o
----------------------------------------------------------------------------------------
Q & A
Q: Why do I replace applications in that toolbox profile theme parameter is missing, how is it?
A: You should first download the application package, unzip the application folder (such as: of CN221-SmartDial-Keypad);
Folder inside the other two folders (respectively the system & config, they are inside and the other two files);
You should put the entire application folder (CN221-SmartDial-Keypad) into the directory you specified.
Q: Can it support both incoming/ outgoing call CHINA AREA CODE and smart dialing?
A: YES
Q: Can it support both incoming/ outgoing call CHINA AREA CODE and call recording?
A: NO
----------------------------------------------------------------------------------------

Related

[ROM][KERNEL] Hyperion Project - Hyperion 7.x | Pre GM now available!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HYPERION 7​
The fastest and smoothest ROM for Samsung Galaxy Young GT-S5360 yet​
With its easy-to-use interface, amazing features, and rock-solid stability, Hyperion leaves others behind.
And even as others try to catch up, the features built into Hyperion keeps your device years ahead.​
Before you download, please read THIS​
​
Elegant and intuitive interface.​
The simple, beautiful Home screen is the easiest place to start.
From the home screen to every built-in apps in the system, navigation is fast, fluid and effortless.​
Everything you touch is easy, intuitive, and fun.​
​
Amazing features and built-in apps.​
An ever-expanding collection of features and built-in apps make Hyperion even more powerful, innovative, and fun to use.
Here are just a few.​
Would you like to donate?​
Save your money for more important matter! ​
I accept "Thanks" donation!​
Fast, simple and easy ​
If you love Hyperion and wants to support the project
Rate the thread 5 stars​
Features and screenshots
NOTE:
... and we are back! If you read on 1st post, you probably not reading this. If you don't get me, click HERE ​
HYPERION 7 HIGHLIGHTS
PERFORMANCE TUNING
Full GPU (Graphic Processing Unit) rendering for faster, smoother and more responsive system performance
Disabled Journalism (File caching) for faster file read/write
Advanced radio controls for maximum battery saving
ADDITIONAL PERFORMANCE TUNING
IPv4 and TCP Stacks tweak
Secure WiFi Profiling
ISP Restriction tweaks
VPN Support
NOTE:
All above performance tuning are certified real by Hyperion Private Testers and not just written there just to say we updated something.
PERFORMANCE TUNING HIGHLIGHTS
Hyperion Core now fused with Adrenaline Engine for blazing fast performance - Tweak developed by ImbaWind- LINK
NetForks tweak for turbo charged internet browsing experience - Tweak developed by DroidFolks- LINK
FEATURES
UNIQUE FEATURES
No SMS Bug
No false Android version
No copy-pasted app from other ROMS
No paid apps edited to look like a new tweak or mod
No useless features
BASIC FEATURES
De-Odexed
Zipaligned
Recompressed APKS
Optimized APK Images
Rooted
BusyBox and BusyBox run-parts support
Apps2SD enabled
ADVANCED FEATURES
EXT4 File System Support
CIFS
Swap Support
BaCeM Tweak
UnderVolt Support
Firewall Support (DroidWall Open-Source Project)
ENHANCEMENTS
Mobile BRAVIA® Engine
xLOUD™ Sound Enhancement Technology
SRS Wow™ HD Sound Enhancement
Beats™ Audio Enhancement
OTHER ENHANCEMENTS WORTH MENTIONING
Modified PlayStore app
No market restrictions
No auto-update
No useless features
Mother of all HOSTS - more than 27,000 servers blocked
Blocks ADs
Blocks banners
Blocks 3rd party cookies
Blocks 3rd party page counters
Blocks web bugs
Blocks hi-jackers
Blocks phising sites
Blocks Malwares
Blocks Spywares
Blocks Trackers
Blocks un-authorized application connection
WHAT MAKES HYPERION UNIQUE
Savie's special kernel for Hyperion (Savie for Hyperion Project)
UNIQUE FEATURE
No false frequency reading
BASIC AND ADVANCED FEATURES
System-App replacer - I love you savie for this!
All-In-One modules
22 Powerful Governors
5 I/O Schedulers
Supports EXT 2/3/4 File System
Supports UnderVolting and UnderClocking
Supports CIFS (Remote Server-Client file access via Internet)
Hyperion Home - Xperia S Launcher originally modified for Gingerbread by ra3al - LINK
UNIQUE FEATURE
Not a paid app - We know how to code so we don't rely on paid apps.
BASIC AND SUPER LAME FEATURES :laugh:
Desktop layouts: Dock only, 4 Corners, Dock + 2 Corners and Dock + 4 Corners
Iconpack Support: Launcher Pro (Plus) icon packs, ADW Launcher icon packs and Go launcher icon packs
Custom desktop and App drawer row and column grid sized
Desktop folder support
App drawer sort methods: Own icon sort, Alphabetical, Most used and Recently Installed
Settings backup and restore function
Network Unlocker - Modified Galaxy Toolbox v1.0 by Doky73 - LINK
Modified for Hyperion
Remove carrier lock (Unlock)
Restore carrier lock (Re-lock)
Remove bin count (kernel flash count via odin)
NOTE:
The purpose of editing is to keep the sdcard structure tidy and to make sure there is no oddity in Core > Tools for menu items. Launcher and bml15 backups are stored in Hyperion folder in sdcard.​
Installation and downloads
DOWNLOAD
Hyperion 7 Golden Master Final
Filename: HYPERION.7-GM.FINAL.zip
Size: 119.31 MB (125109981 bytes)
Uploaded By: CarlDeanCatabay
Uploaded On: 2012-11-13 12:29:45
MD5 Sum: c8a0b092b53165db700943ba72b885d3
File Desc: Hyperion 7 Golden Master Final Public Build
Virus Status: OK (Clean)
To all Hyperion users,
I got a message from our moderator regarding reports that Hyperion 7's zip package contains root explorer which is a paid app. During testing I added RootExplorer to make debugging init.d scripts easier. Due to excitement and demand for the new build, I forgot to remove RootExplorer and accidentally uploaded a zip package that contains this paid app. Starting today, link to Hyperion will be disabled until a new build is ready. Sorry for the inconvenience and my apologies to Speed Software Developers.
Thanks and Regards,
Carl
​INSTALLATIONFlash Hyperion using STOCK RECOVERY
Go to recovery by pressing the HOME button + VOLUME UP key and the POWER BUTTON
Select WIPE DATA/FACTORY RESET
Select WIPE DATA/FACTORY RESET
Select APPLY UPDATE FROM SDCARD
After installing, reboot your phone
Flash Hyperion using CWM (ClockWorkMod) RECOVERY (UPDATED: 10/24/2012 11:13 AM Arabian Standard Time)
Go to recovery by pressing the HOME button + VOLUME UP key and the POWER BUTTON
Select MOUNTS AND STORAGE
Mount /system
Mount /data
Mount /sdcard
Select WIPE DALVIK-CACHE from Advance and Debugging
Select WIPE BATTERY STATS from Advance and Debugging
Select WIPE DATA/FACTORY RESET
Select WIPE CACHE PARTITION
Select INSTALL ZIP FROM SD CARD
Select SELECT ZIP FROM SD CARD
After installing, press the power button to go back and select REBOOT SYSTEM NOW
NOTES
First boot may take from 1-2 minutes or longer
The first screen you will see is the setup wizard.
The blue circle on the right corner of the status bar indicates that the system is busy (performing media scan, staring services etc etc).
In some cases (if flashed via CWM), the status bar might remain in "busy mode" until you restart your device.
HOW DO YOU KNOW YOU'RE STUCK IN BOOT LOGO? -IF IT STAYS THERE FOR MORE THAN 10 MINUTES. IF THAT'S THE CASE, TRY RE-FLASHING THE ROM OR FLASH STOCK ROM FIRST VIA ODIN BEFORE HYPERION :highfive:​
Installation Troubleshooting Guide
​INSTALLATION TROUBLESHOOTING GUIDE
​In the past days, as we have observed, there had been installation issues for new and existing users. We know how annoying it is to get a bootloop, installation aborted and many installation related problem, so here you go, I will put every single scenario that had been reported and the best solution to install the best (according to users) rom when it comes to performance and style :victory:
Whenever I flash a new build, I have this "one-shot-install" method I am keeping. This one works whether you are jumping from one kernel to another. The one-shot-install step is:
Flash stock via Odin (Recommended)
Format SD Card to remove any unwanted files, orphaned data from previous ROM and of course, junk files.
Copy Hyperion zip package to sd card
Reboot to CWM using TempCWM if you are on stock ROM, or the built in CWM from savie's kernel if you are a previous Hyperion user and skipped flashing stock via Odin
Go to Mounts and Storage and mount /system, /data, /cache and sdcard
After mounting, Go back to main menu using the power button
Navigate to Advance (Advanced and Debugging)
Select Wipe dalvik-cache -this helps you avoid bootloops
Select Wipe batterystats -this ensures your battery gauge gets re-calibrated on first boot
After doing wiping dalvik and battstats, Go back to main menu using the power button
Select Wipe data/reset
Select Wipe cache
After doing data and cache wipe, select install update from sdcard
Select zip from sd card
Select Hyperion zip pacakage and install
Wait for the system to complete installation, it will take 2-5 minutes (maximum) to complete installation
Reboot your device
BELOW ARE THE REPORTED SCENARIOS AND POSSIBLE CAUSES WHY INSTALLATION FAILS​ COMMON FAILED INSTALLATION SCENARIO(S)
SCENARIO 1:
"I flashed Hyperion after flashing stock rom via Odin but every time I use Temp CWM and try to flash Hyperion, it goes back to stock recovery. No error is shown on recovery"
CAUSE OF ISSUE:
Incomplete download.
HOW TO AVOID:
Use a MD5 Sum checker. You can ask our dear friend Google for any md5 sum checker, it's free and it is usually less than 1 MB to download. Always make sure your zip package is intact and complete.
QUICK GUIDE TO CHECKING MD5 SUM:
Open your MD5 checker
Select the Hyperion package you downloaded
Paste the MD5 sum value from the download page in DevHost (MD5 Sum: c8a0b092b53165db700943ba72b885d3)
If it matches, then that means the zip package you have is intact and complete​SCENARIO 2:
"I can't flash Hyperion via stock or CWM, it shows installation aborted"
CAUSE OF ISSUE:
Bad or damaged zip package
HOW TO AVOID:
Check the md5 sum and make sure your zip package is not damaged. If it is damaged, md5 checker will show you MD5 Hash Sum mismatch.​SCENARIO 3:
I flashed Hyperion but nothing happened, I still have stock rom or previous custom rom
CAUSE OF ISSUE:
/system, /data, /cache partitions were not mounted in CWM prior to installation
HOW TO AVOID:
Super duper hyper mega easy; Go to Mounts and Storage and make sure they are all mounted​BOOT LOOP SCENARIO(S)
SCENARIO 1:
"I am using a custom rom and I flashed Hyperion on top of it without flashing stock via Odin. After flashing, my device goes to endless boot loop. My previous custom rom includes a custom kernel"
CAUSE OF ISSUE:
Custom kernel (boot.img) from previous ROM
HOW TO AVOID:
The safest way to install a custom rom (in this scenario, Hyperion) on a device running a different custom rom with custom kernel is to revert back to stock rom first because jumpring from one kernel to another will surely cause boot loops. That is why we always recommend flashing stock rom first before flashing Hyperion.​STUCK AT BOOT LOGO SCENARIO(S)
SCENARIO 1:
"I am using a custom rom with repencis kernel or merruk kernel prior to flashing Hyperion. After flashing Hyperion, I am stuck on boot logo (the samsung galaxy y blah blah screen)."
+
Same scenario above but; "I flashed stock rom via odin, but every time I do wipe data/factory reset and wipe cache, it shows me error mounting rfs blah blah"
CAUSE OF ISSUE:
Both repencis and merruk are known to convert your device's File System (FS) to EXT4. If your device's file system is EXT4 and not RFS (Robust File System), flashing Hyperion will fail, but boot.img (kernel) will be flashed.
SYMPTOMS OF EMMC FORMATTED TO EXT4:
CWM cannot mount /system but all partitions can be mounted
Stock recovery cannot do data and cache wipe
HOW TO AVOID/FIX:
Given your phone is already formatted to EXT4, there is nothing you can do but to repartition your device's EMMC (the chip where we install the device's OS) using Odin.
But remember I have written "but boot.img (kernel) will be flashed"? This will help you in solving this kind of issue.
Please keep in mind that this issue is not a problem with Hyperion rom, if CWM and Stock recovery cannot mount your /system partition, no custom rom can be successfully installed on your device.
Now this is the work around . . .
Since boot.img will always be flashed, that means if the kernel on the rom you are installing have CWM installed, then you will have CWM as recovery.
Now that's a good news because your default recovery now is CWM, and you can use it to format partitions back to its default file system. Follow the steps below:
Remove the battery of your device
Press the recovery key combination to boot into recovery
If you are lucky, you will be able to reboot to CWM (given you flashed Hyperion)
Once you are in recovery, Go to mounts and storage and format /system, /data and /cache
Once format is successful, reboot recovery using the "Reboot recovery" option
After rebooting recovery, mount the partitions and try flashing Hyperion again.
Wireless and Networking Troubleshooting Guide
WIRELESS AND NETWORK TROUBLESHOOTING GUIDE​WIFI ISSUE(S)
WIFI ISSUE 1:
WiFi gets disconnected once phone is locked or the display turns off​
CAUSE OF ISSUE:
Okay, don't panic. This is not a bug. This behavior is the one responsible why you save battery even if you don't turn off your WiFi radio and this is called WiFi Sleep Policy.
HOW TO AVOID:
Currently Hyperion have 3 WiFi policies available in Settings Tab > Wireless and Network > WiFi Settings > Advanced > WiFi sleep policy.​
WiFi Sleep Policies:
When screen turns off - if selected, wifi will turn off automatically when the screen turns off (obviously)
Never when plugged in - if selected, wifi will not turn off automatically when connected via AC or USB port and is getting power from either AC or USB.
Never - if selected, wifi will never turn off automatically - default setting in stock roms
WIFI ISSUE 2:
WiFI cannot connect to any wireless hot spot and/or wireless networks
CAUSE OF ISSUE:
Still UNKNOWN. The dev team are thinking that only production specific GT-S5360 devices are affected with this issue.
Based on user feedback, we are in conclusion that the following might be causing the problem:
Savie's special built kernel for Hyperion
Netforks Tweak
Mother of Host
HOW TO AVOID:
Currently, we have the following fix but not all or even none of the below suggestion may fix the problem depending on your SGY.
A simple reboot will fix the WiFi connection problem
Flashing your device's radio image (baseband) via Odin will fix the problem
Removing NetForks tweak will fix the problem
Removing Mother of Host may fix the problem
QUICK GUIDE TO FLASHING BASEBAND
Open Odin and locate the firmware files for your device
Connect your device to computer using USB Data Cable (USB Cable)
On the PHONE field, locate the MODEM file for your device
Click start to start flashing BASEBAND
NOTE:
You will only flash the PHONE file​
QUICK GUIDE TO REMOVING NETFORKS TWEAK
Using root explorer, navigate to system/etc/init.d
Delete 04netforks_tweak
Using root explorer, navigate to data/
Delete droidfolks folder
Reboot your device
INTERNET ISSUE(S)​INTERNET ISSUE 1:
Cannot open websites and or cannot surf the web​
CAUSE OF ISSUE:
Mother of all Hosts​
For some reason, most of the website that can't load on any browser are website like mediafire, 4shared and other file hosting sites which what they have in common are ADs, Popups, Counters and Surveys. Since MOH is blocking these type of web activities, some webpages may not load. Specially those sites that are configured not to load when their advertisements are disabled by either the browser or internet connection.​
HOW TO AVOID: Thanks to Dr.oidbio for pointing this out​
OPTION 1​
Using root explorer, navigate to system/etc​
Replace hosts file with any hosts file from stock or other custom roms​
Reboot your device​
OPTION 2:
Using root explorer, navigate to system/etc
Open hosts file with text editor and edit the content
Delete everything except​
Code:
[LEFT]#
127.0.0.1 localhost
127.0.0.1 localhost.localdomain
255.255.255.255 broadcasthost
::1 localhost
127.0.0.1 local[/LEFT]
Reboot your device​​CONFIRMED WORKING FIX​​REPORTED BY: AlvaroOrduna
Therefore, I set to work and I solved the Wifi issue (obviously with your helpful guides). So that I wanted to share with you the procedure to solve the problem. Here are the steps I took:​1. Delete 04netforks_tweak from system/etc/init.d
2. Delete droidfolks folder from data/
3. Edit the hosts file in system/etc deleting all except:#
127.0.0.1 localhost
127.0.0.1 localhost.localdomain
255.255.255.255 broadcasthost
::1 localhost
127.0.0.1 local​4. Reflash baseband via Odin
It should be mentioned that I do these steps on flashing zip. I mean, I edit the ROM in the computer and then I install it following the steps in INSTALLATION TROUBLESHOOTING GUIDE. Everything else works fine, but in the future I will continue to watch to see how the phone behaves. If something goes wrong and you do not mind, I will report it.​​
Attribution-NonCommercial-NoDerivs 3.0 Unported (CC BY-NC-ND 3.0)
​Disclaimer
The Commons Deed is not a license. It is simply a handy reference for understanding the Legal Code (the full license) — it is a human-readable expression of some of its key terms. Think of it as the user-friendly interface to the Legal Code beneath. This Deed itself has no legal value, and its contents do not appear in the actual license.​
Creative Commons is not a law firm and does not provide legal services. Distributing of, displaying of, or linking to this Commons Deed does not create an attorney-client relationship.​
This is a human-readable summary of the Legal Code (the full license). Disclaimer​
You are free:
to Share — to copy, distribute and transmit the work
Under the following conditions:
Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
Noncommercial — You may not use this work for commercial purposes.
No Derivative Works — You may not alter, transform, or build upon this work.
With the understanding that:
Waiver — Any of the above conditions can be waived if you get permission from the copyright holder.
Public Domain — Where the work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.
Other Rights — In no way are any of the following rights affected by the license:
Your fair dealing or fair use rights, or other applicable copyright exceptions and limitations;
The author's moral rights;
Rights other persons may have either in the work itself or in how the work is used, such as publicity or privacy rights.
Notice — For any reuse or distribution, you must make clear to others the license terms of this work. The best way to do this is with a link to this web page.
Developer Conditions:
Any ported version of this rom for any device must be released under the name "Hyperion" or any name as long as "Hyperion" is present.
Ported version must have the same logo in Settings > System.
A link to this thread is required.
Hyperion Project in HTC Mania​
Preview - Work In Progress
"Do you even know how to theme apk?"
Hyperion 7.x with Hyperion Home 2.x
​
The Dev Team
The Hyperion Project 2012​Devs I thank the most on this project:
b16h22 - Father of EVO-X; the grand daddy of Hyperion
savie - the guy behind Hyperion's Core Power - Savie For Hyperion (SFH) Kernel​Other Devs and their contributions:
ra3al for his amazing work on XPERIA S Home Launcher with Settings | 0.9.2c
DroidFolks for Netforks Tweaks for all Android 2.3.6 - 4.1.2 devices​
Hyperion 7.x Pre GM ​
NOTHING NEW, JUST THIS:
More smoother UI - Project Butter Hyperion style | Speed and stability will always be a priority and not eye candy :angel:
Tamed Mother of all Host - not sure though if it's Grandma Host on this package, but who cares? Host file is less agressive now and this will solve problems with sites (specially file sharing sites) not loading.
UPDATED
Graphics driver for smoother gaming experience.
Some libs and *I think some modules as well.
ADDED
Sound Theme - Linda Sounds Mod (the most complete set).
FIXED
WiFi Issues - caused by Multi-CSC mod that affects WiFi banding depending on the market where your device was officially released. In future I might include CSC + WiFi CSC editing so you can take control of WiFi banding (device <-> router connectivity).
Tick/Untick bug in some checkbox item(s) in settings - might also be region related problem.
Most black text over dark background (some are still present because they don't depend on framework/SystemUI)
BACK FROM THE DEAD
I know you missed the good old TouchWhiz Launcher, so here it is, old guy new look
WHAT'S IN IT:
Holo style dock, home and app drawer buttons
9-12 home screens
5-icon dock support
Grid and List view in App drawer
Support AppShare in app drawer
Random icon background support (currently list view only)
Opacity tweaked to match the overall transparency of UI
DEFAULT CONFIG:
3 Home screens
1 Widget: Google search + voice
4 shortcuts on default home screen
5 icons in dock
App drawer icons arranged alphabetically
App drawer in grid view
DOWNLOAD
Filename: HYPERION-7.x.zip
Size:114.63 MB (120203331 bytes)
Uploaded By:CarlDeanCatabay
Uploaded On:2012-11-30 02:34:16 MD5
Sum:5f37a325cffc4c5f409eaba2e5825d76
File Desc:Hyperion 7.x Pre GM Build
Virus Status:OK (Clean)
Note: Use virus status as a reference, rescan with your own Anti-Virus.​
TRANSLATING HYPERION​TOOLS YOU NEED:
Any apk tool for decompiling and recompiling like APK Tools, APK Manager and APK Changer Alpha 11 - APK Manager and APK Changer Alpha 11 are the one I'm using. Take note, it's alpha 11, not the latest version of APK Changer.
Notepad++ - a GNU editor you can download from HERE
WHERE TO GET THEM:
APK Multitool - http://apkmultitool.com
APK Changer - http://forum.xda-developers.com/showthread.php?t=1189971
APK Tools - I don't know where to get it. Ask dear Google.​HOW TO SETUP YOUR TOOLS:
I advice you use APK Changer as it has an automated setup where you can configure this tool as you install it.
Follow the installation/setup steps for the tool of you choice
After that look for C:\Users\<User>\apktool\framework folder. Ex: C:\Users\Carl\apktool\framework
Take framework-res.apk and rename it to 1.apk
Take twframework-res.apk and rename it to 2.apk
Copy 1.apk and 2.apk to C:\Users\<User>\apktool\framework
HOW TO TRANSLATEPREPARE APKS
In this example, we will modify Settings.apk and translate it to Spanish language.
Take Settings.apk from stock ROM that supports Spanish and rename it to Settings-ES. If your language is not Spanish, then of course you need to take Settings.apk from stock rom for you region which support your language.
Take Settings.apk from Hyperion. You don't need to rename it. Leave it as it is.
DECOMPILE APKS
Once you have all the needed APKS for modding, place it inside the folder designated by the tool you're using for decompiling. In this example I am using APK Changer, so I will put Settings.apk and Settings-ES.apk to C:\Apk-Changer_alpha11\place-files-here-for-modding folder
Open your tool, in this case it is APK Changer. If you installed this already prior to preparing APKS, then you should have the main menu where you have the option to decompile/compile.
Decompile both Settings-ES.apk and Settings.apk
TRANSLATE/ADD ADDITIONAL LANGUAGE TO APK
After decompiling apk, look for the "values" folder inside the decompiled APK. In this case I use APK Changer so I will navigate to C:\Apk-Changer_alpha11\out\Settings\res
You should to the same for Settings-ES and open it in another folder so you can view both folders side-by-side
You can simply take "values-es" folder from Settings.apk and copy it to Settings\res
After copying folder, open Settings\res\strings and add the values present in Settings.apk's res\values\strings.xml to "values-es" folder.
After that, compile your APK and now you have a translated version of APK.
Do this for every app you want to be translated.
OF COURSE MOST OF US ARE LAZY AND ONLY KIND ENOUGH TO TRANSLATE, SO I'LL POST HERE THE FILES YOU NEED TO EDIT AND TRANSLATE AND IF I HAVE TIME AND I AM NOT FEELING LIKE A LAZY MONKEY, I WILL BE THE ONE TO COMPILE THE APK FOR YOU.​NOTE:
Only strings.xml and arrays.xml values needs translation. You only need to translate values inside
Code:
<string name="[COLOR=Red][B]alert_mesage_recipients[/B][/COLOR]">[COLOR=SeaGreen][B]Alert message recipients[/B][/COLOR]</string>
<string name="[COLOR=Red][B]text_you_should_not_translate[/B][/COLOR]">[COLOR=SeaGreen][B]Text you should translate[/B][/COLOR]</string>
Example:
<string name="alert_mesage_recipients">Alert message recipients</string>
You will translate "Alert message recipients"
You should NOT translate "alert_mesage_recipients"
Translated example:
<string name="alert_mesage_recipients">Alerta destinatarios del mensaje</string>​GET FILES HERE
SETTINGS.APK​
CarlDeanCatabay said:
Yes. To check that, navigate to:
/sd-ext/ using root explorer, you will see there:
app
app-private
dalvik-cache
lost+found
To check if deep sleep is working, navigate to:
Settings > Core > CPU States
NOTE:
Deep Sleep starts when phone is idle, if your phone is running for 2-4 minutes from boot, in some cases you will not see deep sleep state in cpu states info. That is normal.
Click to expand...
Click to collapse
i dont know anything abt a2sd plz can u tell me after making the partition what should i do so all the apps and dalvik cache is installed in the partition thanks quick reply will be appreciated
btw i am loving this rom
and is there any way the to change the status bar toggles order
CarlDeanCatabay said:
Yes. To check that, navigate to:
/sd-ext/ using root explorer, you will see there:
app
app-private
dalvik-cache
lost+found
To check if deep sleep is working, navigate to:
Settings > Core > CPU States
NOTE:
Deep Sleep starts when phone is idle, if your phone is running for 2-4 minutes from boot, in some cases you will not see deep sleep state in cpu states info. That is normal.
Click to expand...
Click to collapse
alright.thanks
@CarlDean : No Statusbar tweaks and Widget button, so how do we edit stat bar and add or remove some toggles on 14 toggles?
Solehria said:
i dont know anything abt a2sd plz can u tell me after making the partition what should i do so all the apps and dalvik cache is installed in the partition thanks quick reply will be appreciated
btw i am loving this rom
and is there any way the to change the status bar toggles order
Click to expand...
Click to collapse
Ooops! Seems like I forgot to put QuickToggle in Settings > Parts. I'll create a patch and will attach it here later. Sorry about that, I was too excited to release the ROM
CarlDeanCatabay said:
Based on yowskee's test, RAM usage is about 130-140 MB and he can play Zenonia 4 at 170MB used at most. But i need others to test that.
Click to expand...
Click to collapse
You made my day downloading & flashing
CarlDeanCatabay said:
Ooops! Seems like I forgot to put QuickToggle in Settings > Parts. I'll create a patch and will attach it here later. Sorry about that, I was too excited to release the ROM
Click to expand...
Click to collapse
plz can u tell what i have to do about a2sd after making a partition
if possible add stat bar tweaks...i dont want to see AM and PM on clock
plz people help me what should i do after making the partition
Please, have present the Kernel Savie #73 not run in all model S5360. In variant S5360X not worked.
Solehria said:
plz people help me what should i do after making the partition
Click to expand...
Click to collapse
Please follow the instructions in my Link2SD for dummies on how to partition your SD Card.

i9003 Flashing Tutorial (Gingerbread DDLF2 and Others)

Samsung Galaxy SL i9003 Full DDLF2 Performance and Battery Duration Guide (Clean Flashing; Rooting; Custom Kernel and ClockWork Mod Recovery)
Greetings everyone!
As promised i've updated this tutorial (sorry for the 6 Months delay).
Download this Tutorial (*.pdf File) http://www.mediafire.com/view/ay0kfbtcd2ap6dm/rgxHost_i9003_DDLF2_Complete_Tutorial.pdf
Device: Samsung Galaxy SL i9003
ROM(s): Full DDLF2 (XWKPG or XXKPE) (Note that Deodex file won't Work for XWKPG or XXKPE)
Target: Get Best Battery Duration; Good System Performance and Less Bloatware as Possible. (Including EXT4 for some Extra Performance)
Using: Universal ClockWork Mod Recovery and Custom Kernel (By BCK)
Log:
* Fixed some improper steps;
* Added some recommended aplications and tips that can enhance the performance and fix some system bugs (i.e: Preventing the Full RAM Crash and Restart issue);
* Added Links for XWKPG or XXKPE ROMs wich seem to be unavailable elsewhere.
* Changed the Tutorial Method to work with almost every Rom while supporting DDLF2 Rom (Including How to Perform a Clean Install / Flash)
[Special Thanks to]:
"XDA_Bam": (For his simplest combined CWM + CF-ROOT and Kernel file. Made everything a lot easier).
"sgatechwork": For the Best Gingerbread Rom cooked for our i9003. (And if i'm not mistaken he also owns the credit of the Deodexing Files)
[To Download Before Proceeding]
:: Your Gingerbread Stock Rom ::
DDLF2 FULL (Original Thread): http://forum.xda-developers.com/showthread.php?t=2329200
Mirror Link: http://www.mediafire.com/download/u96833iufz64auo/DDLF2_Full_(PIT,BOOTLOADER,PDA,PHONE,CSC).zip
[DDLF2 DEODEX] (Mirror Link): http://www.mediafire.com/download/m44e62zsryvcvlo/Deodex_DDLF2_Cwm.zip
[DDLF2 Delete Unwanted Files]: (Mirror Link) http://www.mediafire.com/download/h2aby5sf3pyhpt5/DeleteUnwantApp_Cwm-New.zip
Other Roms
XWKPG (Mirror Link): http://www.mediafire.com/download/27006o6h38kecc2/I9003XWKPG_I9003DBTKP2_DBT.zip
XXKPE (Mirror Link): http://www.mediafire.com/download/72ah13hizi7aok6/XXKPE.zip
:: BAM Universal CF-Root (Incl: CWM + CF-ROOT + Custom Kernel) ::
Original Thread: http://forum.xda-developers.com/showthread.php?t=1355675
Mirror Link: http://www.mediafire.com/download/5ejxf1xznub8eaz/PDA_BCK_CWM_universal_beta15.tar
Note: Since i couldn't get some links for original threads, Files and/or ROM's i'm providing my own links for them.
If by some reason i may be violating any terms, please let me know by sending me a message indicating wich file or files are causing any problem, and or to wich thread(s) they should be pointing to.
Furtherwards the files i'm providing were downloaded from the original sources including Sammobile. (wich sometime get their links unavailable). They are EXACTLY the same as their source and are intended to be kept that way.
[WARNING]
By proceeding with the following tutorial you aknowledge that i will not be held responsible if your device gets bricked or gets any other sort of damage.
Although the intent of this tutorial is to help people out and have the most for their devices. Just proceed accordingly.
Always Remember to:
- Make a Backup of your EFS;
- Never mess up with ODIN checkboxes;
- Never Unplug your device whenever it is flashing;
- Have ClockWork Mod Recovery (or TWRP Recovery) so you don't end up without knowing how to restore your device;
- Read all the steps carefully.
TUTORIAL
[BEFORE PROCEDING]
Note: If you Miss your device Drivers Please Install Samsung Kies First.
1. [BACKUP YOUR EFS FOLDER]
For Best Results Create a EFS Backup as: *tar / *.tar.gz / *.img / and a direct copy of the EFS Folder.
Thread on how to Backup and Restore your EFS: http://forum.xda-developers.com/showthread.php?t=2329937
Note: There are some application at Google Play that can also do it for You. (i.e: Galaxy SL Unlock or GSII_Repair, etc)
2. [BACKUP YOUR SD CARD]
Formatting your External SDCard is important, but not required.
Therefore you may not perform a Backup but removing SDCard before Flashing is advised.
[FLASHING THE ROM]
Note: This guide refers methods for "ClockWork Mod Recovery" (CWM)
1) Remove your SDCard (if you've not done it already)
2) Reboot Into CWM or TWRP Recovery (If you don't have it search for the Proper Recovery for your Device)
Booting into "Recovery"
(Press and Hold) Vol. Up + Home Button + Power Button (Release after the 1st Logo is Shown)
3) Under CWM Recovery Select under the following Menus:
<"Main Menu"> :: "Wipe Cache Partition"
<"Advanced"> :: "Wipe Dalvik Cache" (then return to 1st Menu)
<"Mounts and Storage"> :: "Format Cache"
<"Mounts and Storage"> :: "Format Data"
<"Mounts and Storage"> :: "Format System"
<"Mounts and Storage"> :: "Format DataData"
<"Mounts and Storage"> :: "Format SDCard"
<"Mounts and Storage"> :: "Format EMMC"
4) Return to Main Menu and Perform a "Factory Reset".
5) Remove USB Cable and Reboot your device into "Download Mode".
Booting into "Download Mode"
(Press and Hold) Vol. Down + Home Button + Power Button (Release only when it Loads under "Download Mode")
6) Open Odin
7) [ODIN] Under [PIT / OPS] Load your "*.pit" File (i.e: "latona_20110114.pit")
8) Restart Your Device. Once You Get the "Black Screen", Remove the Battery and Boot into CWM.
9) [ODIN] Load Rom Files
Note:If you come from other a Custom Rom, you may have to Flash Original Firmware 1st.
Note: Always Double Check if you're Loading the Files (Bootloader, PDA, Phone/Modem and CSC) in the proper Place.
Note: While the operation is running Do NOT Remove your USB Cable or Disconnect Your Battery untill you see the "PASS!" message on the top left corner.
Note: To prevent Flash Failures; always use High Quality USB Cables; and before pressing Start Put down your device and don't touch it untill the operation is complete!
You may check Loaded Files example bellow (for Full DDLF2 ROM).
i.e:
[BootLoader]: "APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5"
[PDA]: "CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5"
[Phone]: "MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5"
[CSC]: "GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5"
10) [ODIN]
Note a) If you come from Ice Cream Sandwich, Jelly Bean or KitKat (Custom) Roms; it is advised to select "Re-Partition" Checkbox.
Note b) Make sure you have not Selected/de-Selected any Checkboxes (except the one refered at "a" above).
Never change anything if you don't have no idea what they are for.
Specially "Phone EFS Clear". This will literally kill the ability to use your device as a Phone.
Also note that Only a Box or Samsung Service can restore your IMEI if this ("Phone EFS Clear") happens to be Selected.
11) Now that you've Double Checked Everything put Down your Device, Press "Start" and Read the Next Step.
12) When your device completes the procedure above, wait for it to load the 2nd Boot Logo (Usually Animated).
Note that the device may load automatically under recovery to Access, Install and Configure CSC.
If it doesn't then: once the 2nd Logo Starts, count to 3, remove your Battery and Boot your Device under Recovery (Not CWM at the Moment - Reason found Bellow).
This will make sure that the CSC is Installed and Properly Configured (Except if there are any issues with your device, or if you've skipped any of the operations mentioned above).
Note: If you've Flashed Stock Firmware: Know that after you Flash Stock Firmware You lose "ClockWork Mod Recovery". Therefore you must flash it again.
So let's Flash CWM with CF-Root and Custom Kernel (ClockWork Mod Recovery; with Root Permissions and Custom Kernel).
[FLASHING CWM, CUSTOM KERNEL AND ROOT THE DEVICE] (1 File Steps)
1) Remove USB Cable; Power Off your Device and Boot into "Download Mode".
2) Connect your USB Cable, Reset Odin Settings and Under ["PDA"] Load the Following File: "PDA_BCK_CF-root_universal_beta15rc8.tar"
Thread for PDA_BCK_CF-Root_universal: http://forum.xda-developers.com/showthread.php?t=1355675
3) Put Down your Device and Press Start.
4) Once Completed you now have (A rooted Device with Custom Kernel and CWM Recovery).
Your device shall Reboot into CWM Recovery; if it doesn't Reboot it into Recovery and Perform a Factory Reset Again.
Just to clarify: By Performing this "Factory Reset" (Again) you prevent some Errors like:
- Phone Lagging (Specially While Sliding Between Application Pages)
- Getting some configs from previous flashing
Although some sort of lagging will always be present sometimes.
Remember that this is not an ICS, JB or KK Rom nor LoLaTiOn GingerBread that runs ultra fast!
Those Roms are freaking Good (besides some bugs here and there) and i could only recommend them if you use your phone in a "Always Connected to Charger" State.
i.e: your Car as a Multi Functional Stereo; Mp3 Player; GPS and Phone.
Still You will Kill for sure your Battery! (Eventually... Mine Got Fat! Too Much Fast Food (i mean Fast Roms! =) )
P.S: No disrespect for their work wich i apreciate so much. (I'm sure you understand what i mean)
[REMOVING BLOATWARE] [Deodexing] (ONLY For DDLF2)
There are some different ways to accomplish this.
I'm pointing 2 easiest ways, since i didn't get into Deodexing (for Experts) myself.
Remember: This Deodexing tutorial is only for DDLF2 ROM !!! (Wich i USe by the way)
1st Method:
Download "DeleteUnwantApp_Cwm-New.zip" copy to your SDCard and Flash Under CWM Recovery.
This will delete some pre-selected applications. Maybe the safest method for completely inexperienced people.
2nd Method:
1) Copy "Deodex_DDLF2_Cwm.zip" to your SDCard
2) Boot your Device into Recovery (You can now use CWM Application to do it)
Note: Within the application you can boot either to Recovery or Download Mode.
3) Under CWM Recovery Select: Flash ZIP from SDCard; Go to the Folder where you've previously copied "Deodex_DDLF2_Cwm.zip"
Select it and flash it.
4) After it completes the operation, reboot your device and Install "ES File Explorer". (Found on Google Play)
Note: Or just open your favourite File Explorer. Although i made this tutorial for specific applications. (Including "ES File Explorer")
Reason: The applications i mentioned don't give me issues... (Errors or Bugs), and they are extremely usefull somehow and/or fast (with the lowest resource consumption as possible).
5) On the Top Left Corner you have a "List" Button.
- Enable: "Root Explorer" and press that Label Text to pop-up some extra options.
- Select: Mount R/W
- Set "/system" as RW (After you remove undesired applications Place it back under RO)
Note:
"RW" Stands for: "Re-Writable"
"RO" Stands for: "Read Only"
6) Go back to the "List" Button and Select "Library" > "APP"
7) On the Top Click where you see "User Apps", and select: "System Apps"
8) Remove the Applications that you don't use.
Note that not everything can or shall be removed! Some are part of the system itself.
Best thing to do is to note down the application names that you dont like.
Here's a List of some Applications you can Safely Remove:
- Google Maps;
- Talk;
- Gmail (Email Apk);
- Layar;
- Calculator;
- Samsung Apps;
- ThinkFree Office;
- *Youtube;
Note: I wouldnt remove "youtube" if you will youse it later. If you remove it and try to install Youtube from the Market (at least with DDLF2 Rom) the system will Crash on Minimize Video and Reboot.
Other Custom ROMs by some unknown reason run YouTube Perfectly.
9) Removing Several System Applications at Once:
- Press and Hold one of the Applications you want to remove (This will Enable Multiple Selection);
- Then Select the others;
- Press the Garbage Bin on the Bottom ("Uninstall")
- Confirm that you wish to Uninstall and Wait for the Application to Complete.
- Skip Errors / Force Close(s)
Note: It is possible that the device Restarts during this operation.
If so, re-check the application you want to Uninstall.
10) Once Completed Restore "/system" to Read Only ("RO").
On the Top Left Corner you have a "List" Button.
- Go to: Tools.
- You may leave Root Explorer Option Enabled if you prefer that way.
- Press "Root Explorer" Label Text to pop-up the extra options.
- Select: Mount R/W
- Set "/system" as RO
11) Done! ...or if you want to go further into perfecting...
12) The following steps are not necessary... Personally i do them anyway just to ensure the system will Work Properly without the Applications i've Removed.
- Reboot Under CWM and Perform a "Factory Reset"
- Reboot to System and Test Everything.
[PREPARING YOUR SYSTEM FOR EVERYDAY USE] + [INSTALLING RECOMMENDED APPLICATIONS] + [TWEAKING THE DEVICE]
"Some Information" ("Installing Tweaking Applications")
Like mentioned before this tutorial aims for a balance between Performance and Battery Duration.
As some of you already know Gingerbread is amazing for Battery Duration, although it's not the fastest Rom and unfortunly it has also a terrible Task Manager.
Therefore i'm including some applications to tweak your device so you can achieve the balance that you can't find in any other Custom Rom.
i.e: Cyanogen based Roms who Consumes a Lot of battery.
"Applications List" ("Installing Tweaking Applications")
Im not going to talk about every single one as this tutorial aims mostly for Performance and Battery Duration.
Bellow you'll find a brief description of some things you can do with the following applications.
- "CPU Master Pro" (Not Free - Unfortunely) or Similar Application that can set CPU Frequency Profiles like (Charging; Screen Off; In Call; Low Battery and Temperature Over-Heat)
- "SGS Tools" (Mostly for advanced users) This application can Remove Boot Sounds; and fix your GPS Location so it locates faster. Has also a ".prop" Editor, and some aditional advanced features in there! Just Freaking usefull!
- "Twilight" (Screen Dimmer) (Red Light Dimmer; with Profiling Options. Very Good and Free Application)
- "Busybox" or "Busybox X" (Not 100% necessary, but Recommended. Some applications require their installation)
- "ES File Explorer" (For me the Best File Explorer. Fast; Usefull; Visually Pleaseant)
- "Task Manager" (To Improve your device Performance. Your device seems not to reboot anymore when it uses all ammout of RAM. You simply won't let it happen!)
- "Nemus Launcher" (Fast Fast Launcher! With low Resource Consuption)
- "XDA Free" (Your Favourite Forum Application! Where you can rate and thank this thread wich gave me some hours of work; post your questions (read Forum Rules 1st is Important); ask for support; make new buddies; etc...)
"Setting Up Applications"
CPU Master Pro: (Paid)
Ok this will be "al gusto" (configured the way you prefer), but i'm going to point some of my own tips.
If you want to do further research follow this thread: http://forum.xda-developers.com/showthread.php?t=1767797
If you want to take a shotcut...
Then here's some resumed info. (So you can manage your profiles perfectly).
:["Scalings"]:
"Scalings" manage the CPU Behaviour.
Therefore they will help you get the most performance and battery duration.
There are several scalings (including custom Scalings), but i'm going to point out the one's who can really make some havoc and productive effect for the everyday user.
["Smartass v2"]: Is the balance between Battery Duration and Performance.
["Performance"]: Gets the most response as possible.
["Conservative"]: Usefull whenever you need to use your device for longer periods, and/or when you don't have a charger nearby for a long time.
"Setting up CPU Master Pro" Profiles
Open the app Go to Profiles Tab:
The Profiles bellow are the ones who can save some severe battery duration.
Set these profiles "Screen Off" and "In Call"
"Screen Off"
Min Freq: 300 Mhz
Max Freq: 300 Mhz
Scaling: "Conservative" or "Smartass v2"
Note: If you need your device to wake up faster change Max Freq. to: 600 or 800 Mhz.
Both work pretty well, they just differ on battery duration and wake up response.
"In Call"
Min. Freq.: 600 Mhz
Max. Freq.: 600 Mhz
Note: If you go Bellow 600Mhz you may end up in making a longer phone call since your device wont respont so fast. (Usually Lagging)
- Memmory Manager (JRummy) (Partially Free)
- Open the Application and set it to "Moderate" (Higher Values can Crash the System).
- Set it to "Apply on Boot"
Note: The after this i never had the "Full Ram Bug (Crash and Restart) issue anymore."
Note: This application has more usefull features although under the paid version only.
Either way you will notice a better performance just by changing to Moderate.
[OTHER] Script to Increase Battery Duration
Info: This thread bellow will something similar to the CPU Master Pro Profiles.
If you cannot find a better solution for CPU Master Pro Application, then you might want to try this. (Follow the thread link bellow)
Original Thread: http://forum.xda-developers.com/showthread.php?t=2371715
Extended thanks for the pdf format.
Keep it up.
No worries.
Im glad i could help. :thumbup:
Sent from my GT-I9003 using XDA Free mobile app
Thank!
hi rgxHost,
i help my wife to upgrade to XXLE4 (Straight from Froyo) and stuck without rooting the phone (flashed but with wifi error).
she encounters video playback problem (not as smooth as Froyo, some ugly scene transitions).
i want to go back to Froyo, but could not find any installation files anymore (all dead links).
i guess i will try to mess with DDLF2.
Thanks for the guide.
Hello,
Im very sorry for repplying just now.
Within so many threads, I completely lost track on this one.
Links from Sammobile are usually dead, but if you ask them they make the links alive for you.
Froyo is not what you're Looking for due to compatibilities. (Applications, Performance, Bugs, etc).
for Performance:
DDLF2 Properly Tweaked, will give you tons of battery duration, device performance, but lacking the use of newer applications.
Custom Rom will do the Opposite. If you go for a Custom Rom.
Go for Nameless Rom. But make a variety of "efs" Backups. To prevent imei losses.
If you Experience YouTube crashes on DDLF2:
1) Root your device;
2) Install ES File Explorer;
3) Under the menu Click, "Root Explorer"; and make "/" and "system" re-writable. ("rw").
4) Go to the Following Path:
/system/framework or /system/apps
5) Long Press YouTube Icon (So you can select: "Uninstall"). Fully Uninstall YouTube (All Installdd Versions).
6) Set the File Explorerto Read Only Again and Restart the Device.
7) Install YouTube from Google Play and You are Good to Go.
Note:
If you still have issues there's a slight chance that your Custom Kernel could be causing such Issue.
Simply Flash a Different Custom Kernel for your Device. (i9003)
ok successfully flashed without CSC (DDLF2) 'cause i was not able to extract CSC file.
ROM works very good. I think it is faster then CM11 I had before.
is there any sense to flash XWKPG or XXKPE? what for? I have my native language on DDLF2 and Region settings so..
could You give me some piece of theory?
Thanks hitten to the OP!
---------- Post added at 12:18 AM ---------- Previous post was at 12:11 AM ----------
one more question..
Is it necessary to deodex this rom to gain ability to remove bloatware?
I didn't do so on the other devices before (they were newer ones) - only root and Solid Explorer with root rights.
All download links are dead...

OFFICIAL [ROM][5.0.1][cm12 unofficial] [LG-P920] Rom Lolli-P920

ROM name: Lolli-P920
Version Android: 5.0.1 Lollipop
CM version: 12
Hello everyone and sorry for my poor English. I just wanted to inform you of all the features that will have this new rom:
-new Lancher Lollipop
-Android 5.0.1 installed (unofficial)
-new keyboard
-new status bar
-new applications (music, gallery, camera, etc ...)
-Improved wifi, internet browsing, resolution camera, video, streaming video
-Resolution images improved to 100%
-speed system improved by 15%
-Improved sleep mode
-best battery life
-Wireless boosted by 10%
-Improved scan wifi
-new home screen lollipop
- and much more...
------PLEASE READ ALL!!!------
as already I mentioned in my previous post this ROM will install Android 5.0.1 lollipop on our phone. The ROM based on Android 4.1.2 system, in fact, are the main features of andorid 4.1.2, but in practice, and a kind of amalgamation of andorid jelly beans and lollipop.
one of the first features found when you go to turn on the phone and the Manu phone unlock style andorid jelly beans but for practicality and speed are those of Android lollipop. another thing you notice, and the reaction of the system when you go to open an application. then there are other things that make this a unique ROM, that is all based on CyanogenMod 10 and 12 and of course a version modified by me personally and by other developers (Zeta99 and Unity Team).
Now I show you a list of all the new features:
-speed battery charge increased by 30%, comparable "almost" to that of the Samsung Galaxy S6;
-Stability system increased by 10%;
-the improvement of the streaming video and the reaction of the system;
-possibility to increase the RAM phone attraverso swaps that do not create any problems or crash the system;
-possibility to download almost all apps except those that are officially Android lollipop;
-new app including Xposed modules that enhance both the graphics and the phone is its performance;
-all phone app have been partially modified to make it so it is not wasted too much RAM or battery;
-autonomy battery stable (however advise you not straining too much, otherwise it leads to serious problems for both the battery and the phone is);
-and many other new features ...
BUT I'M SORRY tell you, but I HAD PROMISED THAT THE 3D IN A POST PAST ARE NOT ABLE TO PUT IT, WHY PHONE FIRST IS ABLE TO Protect it BUT THEN AFTER A FEW SECONDS WENT IN CRASH AND THEN I WAS FORCED TO REMOVE it, but never say never, in fact it may be that in a future update of the phone to be able to insert, without creating crash the phone. However, I can announce that soon will come two new updates:
-one that will bring Android 5.0.2, with some improvements and fixes minor bugs;
-one that will bring Android 6.0 Marshmallow, with major changes to most of the system is perhaps our dear beloved 3D!!!
the installation file weighs about 450 mb so I recommend you also leave free 1 GB to make room also backup and emergency system otherwise do my (recommended version 4.2.2 pacman).
But now I'll explain how to install the ROM on your LG-P920:
-for the first thing we connect our phone via USB cable to our PC;
-So We copy the RAR ROM Lolli 5.0.1.rar files in the main memory of the phone where we have the backup folder clockworkmod (if there is you then do this: press the power button + volume button upwards , the phone will reboot into recovery mode and you have a couple of options available to us we need backup and restore, let's go on with the volume keys and confirming with the power button, and go to select up and he will make us a backup version and all files, settings, etc ... we have in the phone, you now have the backup folder). "To download clockworkmod clockworkmod.apk write on the internet and download the apk file on your phone."
-after clockworkmod downloaded on our phone we turn off our phone is press the power button + volume button upwards, the phone will reboot into recovery mode and you have a couple of options, we need to us "wipe cache partition "and" wipe data / factory reset ".
-Let's go first to wipe cache partition and run it and after aniamo to wipe data / factory reset and run it.
-Now go to "backup and restore" with the volume keys and confirming with the power button, and then select Restore and select ROM Lolli 5.0.1.rar
- After confirming with the power button the phone will install the package there, waiting lob install the package and now we will have our phone with Android 5.0.1 (unofficial) installed
CAUTION:
1. do not install the "gapps.rar" files because the applications we need are already in the system rar files.
2. Before installing the system, make a backup "total!" our current system (pictures, music, contacts, messages, etc ..) and save it on your computer.
3. in addition to the system that you want to download mettetene also one of "emergency", because if the current gaming system that you downloaded does not work, bring in recovery mode system and install the emergency system and then install the backup you made before .
4. for every problem in the messages ask and I'll try to make a general answer to the problem you have.
5. do not totally rely on the system (for everyday use) because there are still some problems that I will solve in the future with new versions that come out.
6. the phone is responsive to commands you give it to avoid thermal warming much will always recommend every6. the phone is responsive to commands you give it to avoid thermal warming much will always recommend every time you use an app to close it when you do not need or use CLEANMASTER or other application to clean the remaining ram.
7. Enjoy your phone updated
download and ROM image can be found under the next message
| | | |
| | | |
| | | |
\/ \/
Download ROM (MediaFire): http://www.mediafire.com/download/c63tffjv76szryy/ROM+Lolli+5.0.1+(unofficial).zip
The website where to find the images of the ROM: http://azzurro2013.jimdo.com/tecnologia/smartphone/area-download-1/
Thanks to all for the support that we are giving you and goodbye to David G., Zeta99 and UnityTeam
Thread exists for this here:
http://forum.xda-developers.com/android/general/rom-rom-lolli-p920-t3225330
Please don't create duplicate threads.
Thread closed.
Thread exists for this here:
http://forum.xda-developers.com/android/general/rom-rom-lolli-p920-t3225330
Please don't create duplicate threads.
Thread closed.

Need help urgent!!!! Failed debrand

I debranded my phone to c432. and was on c636b211. I followed all the steps to debran and everything went ok until the last part it got stuck. It finished optimizing the system, went to huawei logo and never passes from there. What can I do?
Already went in erecovery mode to download latest version but nothing. Please help me
raul-_-flores said:
I debranded my phone to c432. and was on c636b211. I followed all the steps to debran and everything went ok until the last part it got stuck. It finished optimizing the system, went to huawei logo and never passes from there. What can I do?
Already went in erecovery mode to download latest version but nothing. Please help me
Click to expand...
Click to collapse
How to install NXT-L29C636B521 (Official) Beta Firmware. (Guide with download links)
NXT- L29C636B521
Changelog
Huawei designed EMUI 5.0 based on the newly released Android 7.0. The brand new EMUI 5.0 is inspired by the pure blues and whites of the Aegean Sea. The interface is simple and smart, and EMUI 5.0 comes with enhanced, powerful performance that allows mobile phones to operate more smoothly
Recommendations
• A cleaner, more interactive interface A brand new UI and effects inspired by the blues and whites of the Aegean Sea. Simplified gestures, with most operations completed in 3 steps. EMUI 5.0 is more customizable, offering an optional Android App Drawer layout to users.
• Enhanced features System operations are more fluid, allowing you to view a massive amount of images, browse websites, and perform searches faster.
Find out more
• Notifications An optimized design combines shortcuts with notifications to reduce the complexity of user actions. Touch and hold notifications to quickly block messages and notifications. Reminder cards are stacked to save space.
• Three dimensional task management Tasks are stacked three dimensionally on the UI. Smooth gestures allow users to scroll through tasks by sliding up and down or dismiss tasks by swiping left or right. • Camera Camera now supports plug-in management. Infrequently used modes, like document readjustment, are presented as plug-ins to save internal memory on your phone.
• Contacts Customization and sharing features added to name cards. The sharing feature allows quick sharing of contacts through Bluetooth, Facebook, and other methods. Added a scanner to the search box and lock screen, making it easier to add new contacts.
• Email Improved how unread emails are tagged in the inbox. Users can now quickly delete, star, and mark emails as read or unread from the left sliding menu.
• Settings Created a new suggested settings feature that recommends key settings based on the device's current status. Now, your phone is more capable of adjusting to your habits. Added a newly designed drawer feature. When this feature is enabled, it hides non-system preset apps in a drawer on the home screen, presenting you with a simple and tidy layout. Added a new drawer feature for settings. For settings that take two or more steps to set up, the user can now jump directly back to the main settings page with one gesture. Emergency information added. Users can add their names, blood type, and other information, so emergency services personnel can view this information from the lock screen. Added App twin, a feature that allows users to log in to two different accounts for third-party apps such as WhatsApp and Facebook.
Update notes
1. EMUI 5.0 includes substantial changes to functionality, which may impact your usage habits. For more details, go to HiCare and check out our user guide.
2. We recommend that you back up any important data before updating.
3. The system will restart after the update. This will take about 10 minutes. Following the update, your home screen will automatically display the EMUI 5.0 theme.
4. If you encounter any issues while using EMUI 5.0, please document the issue and call our official helpline. Visit Huawei's consumer website for hotline information.
Step by Step Guide
1.
Download these 3 files (update.zip, update_data_full_hw_spcseas.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v70880/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...ll/hw/spcseas/update_data_full_hw_spcseas.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_data_full_hw_spcseas.zip, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_data_full_hw_spcseas.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
7.1- Factory Reset after success 100%. After that you will get NXT- L29C636B521 (Official) Beta Firmware.
7.2- Run bootloader
7.2- fastboot oem relock ****************
7.3- Factory Reset
8-
Install HiSuite
1.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
1.2- Install HiSuite on your Computer
9-
Connect your phone to HiSuite
10-
Download Gboard apk & Install App using HiSuite
10.1- Download apk Gboard - the Google Keyboard
http://www.sillanwali.com/downloads/Google Gboard 6.0.69.142176780.apk
10.2- Install Gboard - the Google Keyboard App using HiSuite
10.3- Go to Settings>Advance settings>Language & input>Virtual keyboard and enable Gboard
10.4- Go to Settings>Advance settings>Language & input>Default keyboard and select Gboard
11-
Did I help you? A ''thanks :good:'' would be highly appreciated

[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge Stock to Android 13

[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge Stock to Android 13
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S7 Edge (hero2lte Exynos SOC) Stock to Android 13 / LineageOS 20
Supported models
International & Canada:
- SM-G935F
- SM-G935FD
- SM-G935X
- SM-G935W8
Korea:
- SM-G935S
- SM-G935K
- SM-G935L
This detailed step-by-step guide helps you transform your Samsung Galaxy S7 Edge hero2lte to a powerful one with Android 13.
Make sure your phone is hero2lte/Exynos SOC before going further: in Android, go to Settings > About phone > Check Model number is listed above.
If not, quit this tutorial.
### READ THOSE WARNING COMMENTS
CHANGELOG
v5. Back to TWRP 3.6 (3.7 oversize)
v4. Android 13, TWRP 3.7
v3. BitGApps v1, Magisk 25.2
v2. Update TWRP, add adb to change screen definition, update download link
v1. Initial release for Android 12
1) DOWNLOAD
- djibe Galaxy S7 hero2lte pack: https://bit.ly/djibe-galaxys7edge-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.6.2_9-0 official recovery + Magisk Root + adb.exe). Unzip files.
+ ROM Unofficial LineageOS 20: https://forum.xda-developers.com/t/...ofing-ota-updates-for-s7-edge-exynos.4484511/
Download latest build: https://ivanmeler.github.io/devices/hero2lte.html
+ BiTGApps Package ARM64 13: https://github.com/BiTGApps/BiTGApps-Release/releases
OR NikGApps T Basic: https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-T/
OR MindTheGApps 13 ARM64: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > About device > Software update > Update now
### BACKUP NOW, you will lose everything.
3) FLASH TWRP 3.7 RECOVERY
Go to Settings > About phone> Software information.
Tap 7 times on Build number item to unlock Developer options.
Go to Settings > Developer options, switch OEM unlock ON and Confirm.
Shutdown phone.
Boot in Download Mode: hold Home + Power + Volume- until you see blue-green Warning screen and release buttons.
Confirm access to Download mode by pressing Volume+.
Phone now displays "Downloading..., Do not turn off target".
Connect phone in USB, wait for drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select twrp-3.6.2_9-0-hero2lte.img.tar
### Same recovery for Korean models (G930S/K/L variants)
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug phone.
Restart phone to recovery :
- hold Power + Home + Volume- until phone screen becomes black...
- and immediatly switch from Volume- to Volume+ (still holding Power + Home) and hold until Samsung's logo is displayed to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP IMEI PARTITION AND SYSTEM (Nandroid backup)
(Boot in Recovery Mode: Hold Home + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot)
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
Select at least EFS partition to backup your IMEI. If a flash fails and partition is damaged you will still be able to restore this partition and use the phone.
If IMEI is lost during a flash, phone won't be able to reach cellphone networks.
I prefer to backup Boot, System, Baseband and EFS partitions. In case of problem, you will have your phone in its original state.
Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
Save backup: still under TWRP recovery, connect phone to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access phones memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage (if you really made a backup at step 2), then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
6) FLASH ROM, (MAGISK ROOT) AND GAPPS
Back to TWRP main menu, go to Mount menu again to connect phone to PC again.
Connect phone to PC and use Windows explorer to copy files on phone's internal memory.
Copy TWRP folder from your phone to somewhere safe on PC.
This backup can restore your phone to its original Samsung state.
Copy files of ROM + BitGApps + Magisk on phone.
Go back to TWRP Home menu. Then tap on Install > choose lineage*.zip,
Optional for root: Add More zips > Magisk*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Go to Reboot > Recovery and swipe to reboot.
After restart, go to Install, select bitgapps*.zip and swipe to flash.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System and on Install TWRP App? menu, tap on button Do Not Install
Wait for the phone to boot during 5 minutes.
7) ROOT ACCESS
Configure Android as you like.
Don't try to set fingerprints at first setup. It will crash.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
8) TWEAKS
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%
Settings > Display > Dark theme.
- For better battery, remove Always on display
Settings > Display > Lock screen > Ambient display
- Activate Developer options
Go to Settings > About.
At bottom, tap 7 times on Build number. You activated Developer options.
Go to Settings > System > Advanced > Developer options.
- Change screen definition for low GPU/CPU usage: from 1440x2560 to 1080x1920
You need developer options to enable USB debugging.
Open a terminal where adb.exe from my pack is located.
Plug phone and Authorize USB debugging.
Then type:
Code:
adb shell wm size 1080x1920 && adb shell wm density 400
// Defaults 1440x2560 and 504
- Screen sensitivity is too low ?
Try to recalibrate screen sensitivity with https://play.google.com/store/apps/details?id=touchcalibration.favoritappindia&hl=en&gl=US
Enjoy,
djibe
Thanks: @Ivan_Meler, LineageOS team, TWRP team, TopJohnWu
---------------------------------------
Coming from another ROM
- Backup
- Recovery: Wipe Cache, Dalvik cache, System and Format Data > yes
- Reboot recovery
- Flash rom
- Reboot recovery
- Flash BitGApps
Enjoy
Force Samsung Galaxy S7 restart
Hold Power + Volume down for 10-20 seconds
Thanks for the detailed instructions.
Please fix two minor typos: In the Odin instructions, the files should be hero2lte* not herolte*.
Re Magisk: 24.0, I suppose, should be used / upgraded to. (I've run into issues with 24.2 on another platform.)
steve8x8 said:
Thanks for the detailed instructions.
Please fix two minor typos: In the Odin instructions, the files should be hero2lte* not herolte*.
Re Magisk: 24.0, I suppose, should be used / upgraded to. (I've run into issues with 24.2 on another platform.)
Click to expand...
Click to collapse
Hi, you are correct and I'll fix glitch.
For Magisk, as you report bugs, I'll wait to move to 24.x. You can create an Issue here: https://github.com/topjohnwu/Magisk/issues
Thanks for sharing
I have a problemi instaled twrp format data and and instal rom after configuration rom when i rebooting to twrp data is encrypted. why ?
zulwik said:
I have a problemi instaled twrp format data and and instal rom after configuration rom when i rebooting to twrp data is encrypted. why ?
Click to expand...
Click to collapse
Hi, did you Format Data then Advanced Wipe > Format Cache, System ?
Then
Reboot to Recovery
Flash ROM
Reboot to recovery
Flash BitGapps
Reboot
I solved problem.
I installed older version TWRP with Odin and new version
hey @djibe89 & other XDA folks, thanks for these steps.
I have a SMG935W8 and currently borked on the BiTGApps step. All proceeded smoothly until there and now I'm seeing an error on TWRP and I'm not really sure how to resolve it.
It's complaining that the install config is not found and that it's an unsupported Android SDK version, which doesn't seem quite right.
Any tips would be highly appreciated
Judging from my deep dive, the current LineageOS 19.1 builds are SDK 32, and the BiTGapps builds only support up to 31... Definitely looking for tips, still.
Going to try this post's GApps
Hi, for now, stick to latest LOS 19 build: https://github.com/ivanmeler/ota_provider/releases/tag/herolte_lineage-19.0_1646935359, not 19.1
Or could you try NikGapps and tell us?
Thanks @djibe89 ! I went with NikGapps and that was a win.
It might be good to edit the top post to say 19.0 or have the NikGapps linked in it, for future readers.
Phone's working great. I appreciate it!
Bujiraso said:
Thanks @djibe89 ! I went with NikGapps and that was a win.
It might be good to edit the top post to say 19.0 or have the NikGapps linked in it, for future readers.
Phone's working great. I appreciate it!
Click to expand...
Click to collapse
Hi, I'll update it.
I hoped a newer BitGapps update would be released by now.
Enjoy, this phone is awesome
Hey again!
Been daily driving this for a bit and here's a laundry list of the issues I see, in no order at all.
I'm not sure if they're Lineage issues or artifacts of being an "unsupported" Lineage build.
1. The screen just stays on despite the power save settings (I've tried 15s, 30s, you name it) if I'm on the home screen. Trebuchet, is it?
It's like it has some keep alive function a la YouTube. It's not 100% but it seems far more than 50% of the time that I have to manually lock the device. Anyone know if I've just configured something wrong or if this is how the launcher is supposed to work?
2. Phone services will not stop demanding my location, no matter what I configure. It's every few minutes and it's creeping me out a ton. Why is it so nosey?
3. The call audio quality is still barely usable. While I *can* have intelligible business conversations when required, they suffer the quality noticeably and are terribly robotic and tinny. For personal calls, I tried to play it off once but immediately was laughed out of the call: they asked before even a "how are you" could pass if we could switch to VoIP since it was so comically bad. After some kind tips from Ivan I tried mucking with the mixer levels to no avail. They did seem a bit "low" compared to the 18.1/19.0 values, so I pumped them in a couple places (NB volume from 22 to 32, call default volume on 917 from 98 to 164 -- I have no clue what any of these mean). It might be louder now? It's not worth an A/B test to confirm what should be the expectation, but my point is that it didn't fix the robotic, tinny quality.
4. Banking app complains of the device being rooted, but it isn't. "Great." I hear the latest Zygisk might fix? I haven't tried yet.
Now, I'm still excited to be on 12L! I'm trying to buff my ability to dev on this ROM and fix up some of these issues, as I really don't think this phone needs to be replaced yet, but being stuck on stock Oreo isn't working either, so I say let's hack this thing till it's stable as stock!
Hi @Bujiraso , thanks for sharing.
Didn't use it on a daily basis
Have you tried another launcher ?
I think bank apps detect custom ROM, nothing can be done. Hope I'm wrong. Some genius of signature spoofing can pass this I believe. But I'm not.
djibe89 said:
- To tweak overclocking and more, use SmartPack-Kernel Manager
SmartPack-Kernel Manager - Apps on Google Play
The ultimate tool to manage your kernel
play.google.com
Enjoy,
djibe
Click to expand...
Click to collapse
We're sorry, the requested URL was not found on this server. New Link please.
SERGE4NT said:
We're sorry, the requested URL was not found on this server. New Link please.
Click to expand...
Click to collapse
Hi, you can try https://play.google.com/store/apps/details?id=com.performancetweaker.app or https://f-droid.org/repo/com.smartpack.kernelmanager_174.apk
hi, is it possible for the model number SM-G9350
Klein44 said:
hi, is it possible for the model number SM-G9350
Click to expand...
Click to collapse
Hi, sadly no.
9350 and 9300 have Snapdragon SOCs, not Exynos.
Only Android 8 ROMs: https://forum.xda-developers.com/f/samsung-galaxy-s7-edge-snapdragon-roms-kernels.5975/
Oh, ok. And is there any good custom rom for the SM-G9350 model?
Klein44 said:
Oh, ok. And is there any good custom rom for the SM-G9350 model?
Click to expand...
Click to collapse
Like you see here: https://forum.xda-developers.com/f/samsung-galaxy-s7-edge-snapdragon-roms-kernels.5975/
No.
This happens with Qualcomm proprietary SOCs

Categories

Resources